Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 726 insertions, 0 deletions

diff --git a/drivers/media/tuners/tda18271-common.c b/drivers/media/tuners/tda18271-common.c
new file mode 100644
index 000000000..d1b7f4244
--- /dev/null
+++ b/drivers/media/tuners/tda18271-common.c
@@ -0,0 +1,726 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+    tda18271-common.c - driver for the Philips / NXP TDA18271 silicon tuner
+
+    Copyright (C) 2007, 2008 Michael Krufky <mkrufky@linuxtv.org>
+
+*/
+
+#include "tda18271-priv.h"
+
+static int tda18271_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
+{
+	struct tda18271_priv *priv = fe->tuner_priv;
+	enum tda18271_i2c_gate gate;
+	int ret = 0;
+
+	switch (priv->gate) {
+	case TDA18271_GATE_DIGITAL:
+	case TDA18271_GATE_ANALOG:
+		gate = priv->gate;
+		break;
+	case TDA18271_GATE_AUTO:
+	default:
+		switch (priv->mode) {
+		case TDA18271_DIGITAL:
+			gate = TDA18271_GATE_DIGITAL;
+			break;
+		case TDA18271_ANALOG:
+		default:
+			gate = TDA18271_GATE_ANALOG;
+			break;
+		}
+	}
+
+	switch (gate) {
+	case TDA18271_GATE_ANALOG:
+		if (fe->ops.analog_ops.i2c_gate_ctrl)
+			ret = fe->ops.analog_ops.i2c_gate_ctrl(fe, enable);
+		break;
+	case TDA18271_GATE_DIGITAL:
+		if (fe->ops.i2c_gate_ctrl)
+			ret = fe->ops.i2c_gate_ctrl(fe, enable);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+};
+
+/*---------------------------------------------------------------------*/
+
+static void tda18271_dump_regs(struct dvb_frontend *fe, int extended)
+{
+	struct tda18271_priv *priv = fe->tuner_priv;
+	unsigned char *regs = priv->tda18271_regs;
+
+	tda_reg("=== TDA18271 REG DUMP ===\n");
+	tda_reg("ID_BYTE            = 0x%02x\n", 0xff & regs[R_ID]);
+	tda_reg("THERMO_BYTE        = 0x%02x\n", 0xff & regs[R_TM]);
+	tda_reg("POWER_LEVEL_BYTE   = 0x%02x\n", 0xff & regs[R_PL]);
+	tda_reg("EASY_PROG_BYTE_1   = 0x%02x\n", 0xff & regs[R_EP1]);
+	tda_reg("EASY_PROG_BYTE_2   = 0x%02x\n", 0xff & regs[R_EP2]);
+	tda_reg("EASY_PROG_BYTE_3   = 0x%02x\n", 0xff & regs[R_EP3]);
+	tda_reg("EASY_PROG_BYTE_4   = 0x%02x\n", 0xff & regs[R_EP4]);
+	tda_reg("EASY_PROG_BYTE_5   = 0x%02x\n", 0xff & regs[R_EP5]);
+	tda_reg("CAL_POST_DIV_BYTE  = 0x%02x\n", 0xff & regs[R_CPD]);
+	tda_reg("CAL_DIV_BYTE_1     = 0x%02x\n", 0xff & regs[R_CD1]);
+	tda_reg("CAL_DIV_BYTE_2     = 0x%02x\n", 0xff & regs[R_CD2]);
+	tda_reg("CAL_DIV_BYTE_3     = 0x%02x\n", 0xff & regs[R_CD3]);
+	tda_reg("MAIN_POST_DIV_BYTE = 0x%02x\n", 0xff & regs[R_MPD]);
+	tda_reg("MAIN_DIV_BYTE_1    = 0x%02x\n", 0xff & regs[R_MD1]);
+	tda_reg("MAIN_DIV_BYTE_2    = 0x%02x\n", 0xff & regs[R_MD2]);
+	tda_reg("MAIN_DIV_BYTE_3    = 0x%02x\n", 0xff & regs[R_MD3]);
+
+	/* only dump extended regs if DBG_ADV is set */
+	if (!(tda18271_debug & DBG_ADV))
+		return;
+
+	/* W indicates write-only registers.
+	 * Register dump for write-only registers shows last value written. */
+
+	tda_reg("EXTENDED_BYTE_1    = 0x%02x\n", 0xff & regs[R_EB1]);
+	tda_reg("EXTENDED_BYTE_2    = 0x%02x\n", 0xff & regs[R_EB2]);
+	tda_reg("EXTENDED_BYTE_3    = 0x%02x\n", 0xff & regs[R_EB3]);
+	tda_reg("EXTENDED_BYTE_4    = 0x%02x\n", 0xff & regs[R_EB4]);
+	tda_reg("EXTENDED_BYTE_5    = 0x%02x\n", 0xff & regs[R_EB5]);
+	tda_reg("EXTENDED_BYTE_6    = 0x%02x\n", 0xff & regs[R_EB6]);
+	tda_reg("EXTENDED_BYTE_7    = 0x%02x\n", 0xff & regs[R_EB7]);
+	tda_reg("EXTENDED_BYTE_8    = 0x%02x\n", 0xff & regs[R_EB8]);
+	tda_reg("EXTENDED_BYTE_9  W = 0x%02x\n", 0xff & regs[R_EB9]);
+	tda_reg("EXTENDED_BYTE_10   = 0x%02x\n", 0xff & regs[R_EB10]);
+	tda_reg("EXTENDED_BYTE_11   = 0x%02x\n", 0xff & regs[R_EB11]);
+	tda_reg("EXTENDED_BYTE_12   = 0x%02x\n", 0xff & regs[R_EB12]);
+	tda_reg("EXTENDED_BYTE_13   = 0x%02x\n", 0xff & regs[R_EB13]);
+	tda_reg("EXTENDED_BYTE_14   = 0x%02x\n", 0xff & regs[R_EB14]);
+	tda_reg("EXTENDED_BYTE_15   = 0x%02x\n", 0xff & regs[R_EB15]);
+	tda_reg("EXTENDED_BYTE_16 W = 0x%02x\n", 0xff & regs[R_EB16]);
+	tda_reg("EXTENDED_BYTE_17 W = 0x%02x\n", 0xff & regs[R_EB17]);
+	tda_reg("EXTENDED_BYTE_18   = 0x%02x\n", 0xff & regs[R_EB18]);
+	tda_reg("EXTENDED_BYTE_19 W = 0x%02x\n", 0xff & regs[R_EB19]);
+	tda_reg("EXTENDED_BYTE_20 W = 0x%02x\n", 0xff & regs[R_EB20]);
+	tda_reg("EXTENDED_BYTE_21   = 0x%02x\n", 0xff & regs[R_EB21]);
+	tda_reg("EXTENDED_BYTE_22   = 0x%02x\n", 0xff & regs[R_EB22]);
+	tda_reg("EXTENDED_BYTE_23   = 0x%02x\n", 0xff & regs[R_EB23]);
+}
+
+int tda18271_read_regs(struct dvb_frontend *fe)
+{
+	struct tda18271_priv *priv = fe->tuner_priv;
+	unsigned char *regs = priv->tda18271_regs;
+	unsigned char buf = 0x00;
+	int ret;
+	struct i2c_msg msg[] = {
+		{ .addr = priv->i2c_props.addr, .flags = 0,
+		  .buf = &buf, .len = 1 },
+		{ .addr = priv->i2c_props.addr, .flags = I2C_M_RD,
+		  .buf = regs, .len = 16 }
+	};
+
+	tda18271_i2c_gate_ctrl(fe, 1);
+
+	/* read all registers */
+	ret = i2c_transfer(priv->i2c_props.adap, msg, 2);
+
+	tda18271_i2c_gate_ctrl(fe, 0);
+
+	if (ret != 2)
+		tda_err("ERROR: i2c_transfer returned: %d\n", ret);
+
+	if (tda18271_debug & DBG_REG)
+		tda18271_dump_regs(fe, 0);
+
+	return (ret == 2 ? 0 : ret);
+}
+
+int tda18271_read_extended(struct dvb_frontend *fe)
+{
+	struct tda18271_priv *priv = fe->tuner_priv;
+	unsigned char *regs = priv->tda18271_regs;
+	unsigned char regdump[TDA18271_NUM_REGS];
+	unsigned char buf = 0x00;
+	int ret, i;
+	struct i2c_msg msg[] = {
+		{ .addr = priv->i2c_props.addr, .flags = 0,
+		  .buf = &buf, .len = 1 },
+		{ .addr = priv->i2c_props.addr, .flags = I2C_M_RD,
+		  .buf = regdump, .len = TDA18271_NUM_REGS }
+	};
+
+	tda18271_i2c_gate_ctrl(fe, 1);
+
+	/* read all registers */
+	ret = i2c_transfer(priv->i2c_props.adap, msg, 2);
+
+	tda18271_i2c_gate_ctrl(fe, 0);
+
+	if (ret != 2)
+		tda_err("ERROR: i2c_transfer returned: %d\n", ret);
+
+	for (i = 0; i < TDA18271_NUM_REGS; i++) {
+		/* don't update write-only registers */
+		if ((i != R_EB9)  &&
+		    (i != R_EB16) &&
+		    (i != R_EB17) &&
+		    (i != R_EB19) &&
+		    (i != R_EB20))
+			regs[i] = regdump[i];
+	}
+
+	if (tda18271_debug & DBG_REG)
+		tda18271_dump_regs(fe, 1);
+
+	return (ret == 2 ? 0 : ret);
+}
+
+static int __tda18271_write_regs(struct dvb_frontend *fe, int idx, int len,
+			bool lock_i2c)
+{
+	struct tda18271_priv *priv = fe->tuner_priv;
+	unsigned char *regs = priv->tda18271_regs;
+	unsigned char buf[TDA18271_NUM_REGS + 1];
+	struct i2c_msg msg = { .addr = priv->i2c_props.addr, .flags = 0,
+			       .buf = buf };
+	int i, ret = 1, max;
+
+	BUG_ON((len == 0) || (idx + len > sizeof(buf)));
+
+	switch (priv->small_i2c) {
+	case TDA18271_03_BYTE_CHUNK_INIT:
+		max = 3;
+		break;
+	case TDA18271_08_BYTE_CHUNK_INIT:
+		max = 8;
+		break;
+	case TDA18271_16_BYTE_CHUNK_INIT:
+		max = 16;
+		break;
+	case TDA18271_39_BYTE_CHUNK_INIT:
+	default:
+		max = 39;
+	}
+
+
+	/*
+	 * If lock_i2c is true, it will take the I2C bus for tda18271 private
+	 * usage during the entire write ops, as otherwise, bad things could
+	 * happen.
+	 * During device init, several write operations will happen. So,
+	 * tda18271_init_regs controls the I2C lock directly,
+	 * disabling lock_i2c here.
+	 */
+	if (lock_i2c) {
+		tda18271_i2c_gate_ctrl(fe, 1);
+		i2c_lock_bus(priv->i2c_props.adap, I2C_LOCK_SEGMENT);
+	}
+	while (len) {
+		if (max > len)
+			max = len;
+
+		buf[0] = idx;
+		for (i = 1; i <= max; i++)
+			buf[i] = regs[idx - 1 + i];
+
+		msg.len = max + 1;
+
+		/* write registers */
+		ret = __i2c_transfer(priv->i2c_props.adap, &msg, 1);
+		if (ret != 1)
+			break;
+
+		idx += max;
+		len -= max;
+	}
+	if (lock_i2c) {
+		i2c_unlock_bus(priv->i2c_props.adap, I2C_LOCK_SEGMENT);
+		tda18271_i2c_gate_ctrl(fe, 0);
+	}
+
+	if (ret != 1)
+		tda_err("ERROR: idx = 0x%x, len = %d, i2c_transfer returned: %d\n",
+			idx, max, ret);
+
+	return (ret == 1 ? 0 : ret);
+}
+
+int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len)
+{
+	return __tda18271_write_regs(fe, idx, len, true);
+}
+
+/*---------------------------------------------------------------------*/
+
+static int __tda18271_charge_pump_source(struct dvb_frontend *fe,
+					 enum tda18271_pll pll, int force,
+					 bool lock_i2c)
+{
+	struct tda18271_priv *priv = fe->tuner_priv;
+	unsigned char *regs = priv->tda18271_regs;
+
+	int r_cp = (pll == TDA18271_CAL_PLL) ? R_EB7 : R_EB4;
+
+	regs[r_cp] &= ~0x20;
+	regs[r_cp] |= ((force & 1) << 5);
+
+	return __tda18271_write_regs(fe, r_cp, 1, lock_i2c);
+}
+
+int tda18271_charge_pump_source(struct dvb_frontend *fe,
+				enum tda18271_pll pll, int force)
+{
+	return __tda18271_charge_pump_source(fe, pll, force, true);
+}
+
+
+int tda18271_init_regs(struct dvb_frontend *fe)
+{
+	struct tda18271_priv *priv = fe->tuner_priv;
+	unsigned char *regs = priv->tda18271_regs;
+
+	tda_dbg("initializing registers for device @ %d-%04x\n",
+		i2c_adapter_id(priv->i2c_props.adap),
+		priv->i2c_props.addr);
+
+	/*
+	 * Don't let any other I2C transfer to happen at adapter during init,
+	 * as those could cause bad things
+	 */
+	tda18271_i2c_gate_ctrl(fe, 1);
+	i2c_lock_bus(priv->i2c_props.adap, I2C_LOCK_SEGMENT);
+
+	/* initialize registers */
+	switch (priv->id) {
+	case TDA18271HDC1:
+		regs[R_ID]   = 0x83;
+		break;
+	case TDA18271HDC2:
+		regs[R_ID]   = 0x84;
+		break;
+	}
+
+	regs[R_TM]   = 0x08;
+	regs[R_PL]   = 0x80;
+	regs[R_EP1]  = 0xc6;
+	regs[R_EP2]  = 0xdf;
+	regs[R_EP3]  = 0x16;
+	regs[R_EP4]  = 0x60;
+	regs[R_EP5]  = 0x80;
+	regs[R_CPD]  = 0x80;
+	regs[R_CD1]  = 0x00;
+	regs[R_CD2]  = 0x00;
+	regs[R_CD3]  = 0x00;
+	regs[R_MPD]  = 0x00;
+	regs[R_MD1]  = 0x00;
+	regs[R_MD2]  = 0x00;
+	regs[R_MD3]  = 0x00;
+
+	switch (priv->id) {
+	case TDA18271HDC1:
+		regs[R_EB1]  = 0xff;
+		break;
+	case TDA18271HDC2:
+		regs[R_EB1]  = 0xfc;
+		break;
+	}
+
+	regs[R_EB2]  = 0x01;
+	regs[R_EB3]  = 0x84;
+	regs[R_EB4]  = 0x41;
+	regs[R_EB5]  = 0x01;
+	regs[R_EB6]  = 0x84;
+	regs[R_EB7]  = 0x40;
+	regs[R_EB8]  = 0x07;
+	regs[R_EB9]  = 0x00;
+	regs[R_EB10] = 0x00;
+	regs[R_EB11] = 0x96;
+
+	switch (priv->id) {
+	case TDA18271HDC1:
+		regs[R_EB12] = 0x0f;
+		break;
+	case TDA18271HDC2:
+		regs[R_EB12] = 0x33;
+		break;
+	}
+
+	regs[R_EB13] = 0xc1;
+	regs[R_EB14] = 0x00;
+	regs[R_EB15] = 0x8f;
+	regs[R_EB16] = 0x00;
+	regs[R_EB17] = 0x00;
+
+	switch (priv->id) {
+	case TDA18271HDC1:
+		regs[R_EB18] = 0x00;
+		break;
+	case TDA18271HDC2:
+		regs[R_EB18] = 0x8c;
+		break;
+	}
+
+	regs[R_EB19] = 0x00;
+	regs[R_EB20] = 0x20;
+
+	switch (priv->id) {
+	case TDA18271HDC1:
+		regs[R_EB21] = 0x33;
+		break;
+	case TDA18271HDC2:
+		regs[R_EB21] = 0xb3;
+		break;
+	}
+
+	regs[R_EB22] = 0x48;
+	regs[R_EB23] = 0xb0;
+
+	__tda18271_write_regs(fe, 0x00, TDA18271_NUM_REGS, false);
+
+	/* setup agc1 gain */
+	regs[R_EB17] = 0x00;
+	__tda18271_write_regs(fe, R_EB17, 1, false);
+	regs[R_EB17] = 0x03;
+	__tda18271_write_regs(fe, R_EB17, 1, false);
+	regs[R_EB17] = 0x43;
+	__tda18271_write_regs(fe, R_EB17, 1, false);
+	regs[R_EB17] = 0x4c;
+	__tda18271_write_regs(fe, R_EB17, 1, false);
+
+	/* setup agc2 gain */
+	if ((priv->id) == TDA18271HDC1) {
+		regs[R_EB20] = 0xa0;
+		__tda18271_write_regs(fe, R_EB20, 1, false);
+		regs[R_EB20] = 0xa7;
+		__tda18271_write_regs(fe, R_EB20, 1, false);
+		regs[R_EB20] = 0xe7;
+		__tda18271_write_regs(fe, R_EB20, 1, false);
+		regs[R_EB20] = 0xec;
+		__tda18271_write_regs(fe, R_EB20, 1, false);
+	}
+
+	/* image rejection calibration */
+
+	/* low-band */
+	regs[R_EP3] = 0x1f;
+	regs[R_EP4] = 0x66;
+	regs[R_EP5] = 0x81;
+	regs[R_CPD] = 0xcc;
+	regs[R_CD1] = 0x6c;
+	regs[R_CD2] = 0x00;
+	regs[R_CD3] = 0x00;
+	regs[R_MPD] = 0xcd;
+	regs[R_MD1] = 0x77;
+	regs[R_MD2] = 0x08;
+	regs[R_MD3] = 0x00;
+
+	__tda18271_write_regs(fe, R_EP3, 11, false);
+
+	if ((priv->id) == TDA18271HDC2) {
+		/* main pll cp source on */
+		__tda18271_charge_pump_source(fe, TDA18271_MAIN_PLL, 1, false);
+		msleep(1);
+
+		/* main pll cp source off */
+		__tda18271_charge_pump_source(fe, TDA18271_MAIN_PLL, 0, false);
+	}
+
+	msleep(5); /* pll locking */
+
+	/* launch detector */
+	__tda18271_write_regs(fe, R_EP1, 1, false);
+	msleep(5); /* wanted low measurement */
+
+	regs[R_EP5] = 0x85;
+	regs[R_CPD] = 0xcb;
+	regs[R_CD1] = 0x66;
+	regs[R_CD2] = 0x70;
+
+	__tda18271_write_regs(fe, R_EP3, 7, false);
+	msleep(5); /* pll locking */
+
+	/* launch optimization algorithm */
+	__tda18271_write_regs(fe, R_EP2, 1, false);
+	msleep(30); /* image low optimization completion */
+
+	/* mid-band */
+	regs[R_EP5] = 0x82;
+	regs[R_CPD] = 0xa8;
+	regs[R_CD2] = 0x00;
+	regs[R_MPD] = 0xa9;
+	regs[R_MD1] = 0x73;
+	regs[R_MD2] = 0x1a;
+
+	__tda18271_write_regs(fe, R_EP3, 11, false);
+	msleep(5); /* pll locking */
+
+	/* launch detector */
+	__tda18271_write_regs(fe, R_EP1, 1, false);
+	msleep(5); /* wanted mid measurement */
+
+	regs[R_EP5] = 0x86;
+	regs[R_CPD] = 0xa8;
+	regs[R_CD1] = 0x66;
+	regs[R_CD2] = 0xa0;
+
+	__tda18271_write_regs(fe, R_EP3, 7, false);
+	msleep(5); /* pll locking */
+
+	/* launch optimization algorithm */
+	__tda18271_write_regs(fe, R_EP2, 1, false);
+	msleep(30); /* image mid optimization completion */
+
+	/* high-band */
+	regs[R_EP5] = 0x83;
+	regs[R_CPD] = 0x98;
+	regs[R_CD1] = 0x65;
+	regs[R_CD2] = 0x00;
+	regs[R_MPD] = 0x99;
+	regs[R_MD1] = 0x71;
+	regs[R_MD2] = 0xcd;
+
+	__tda18271_write_regs(fe, R_EP3, 11, false);
+	msleep(5); /* pll locking */
+
+	/* launch detector */
+	__tda18271_write_regs(fe, R_EP1, 1, false);
+	msleep(5); /* wanted high measurement */
+
+	regs[R_EP5] = 0x87;
+	regs[R_CD1] = 0x65;
+	regs[R_CD2] = 0x50;
+
+	__tda18271_write_regs(fe, R_EP3, 7, false);
+	msleep(5); /* pll locking */
+
+	/* launch optimization algorithm */
+	__tda18271_write_regs(fe, R_EP2, 1, false);
+	msleep(30); /* image high optimization completion */
+
+	/* return to normal mode */
+	regs[R_EP4] = 0x64;
+	__tda18271_write_regs(fe, R_EP4, 1, false);
+
+	/* synchronize */
+	__tda18271_write_regs(fe, R_EP1, 1, false);
+
+	i2c_unlock_bus(priv->i2c_props.adap, I2C_LOCK_SEGMENT);
+	tda18271_i2c_gate_ctrl(fe, 0);
+
+	return 0;
+}
+
+/*---------------------------------------------------------------------*/
+
+/*
+ *  Standby modes, EP3 [7:5]
+ *
+ *  | SM  || SM_LT || SM_XT || mode description
+ *  |=====\\=======\\=======\\====================================
+ *  |  0  ||   0   ||   0   || normal mode
+ *  |-----||-------||-------||------------------------------------
+ *  |     ||       ||       || standby mode w/ slave tuner output
+ *  |  1  ||   0   ||   0   || & loop through & xtal oscillator on
+ *  |-----||-------||-------||------------------------------------
+ *  |  1  ||   1   ||   0   || standby mode w/ xtal oscillator on
+ *  |-----||-------||-------||------------------------------------
+ *  |  1  ||   1   ||   1   || power off
+ *
+ */
+
+int tda18271_set_standby_mode(struct dvb_frontend *fe,
+			      int sm, int sm_lt, int sm_xt)
+{
+	struct tda18271_priv *priv = fe->tuner_priv;
+	unsigned char *regs = priv->tda18271_regs;
+
+	if (tda18271_debug & DBG_ADV)
+		tda_dbg("sm = %d, sm_lt = %d, sm_xt = %d\n", sm, sm_lt, sm_xt);
+
+	regs[R_EP3]  &= ~0xe0; /* clear sm, sm_lt, sm_xt */
+	regs[R_EP3]  |= (sm    ? (1 << 7) : 0) |
+			(sm_lt ? (1 << 6) : 0) |
+			(sm_xt ? (1 << 5) : 0);
+
+	return tda18271_write_regs(fe, R_EP3, 1);
+}
+
+/*---------------------------------------------------------------------*/
+
+int tda18271_calc_main_pll(struct dvb_frontend *fe, u32 freq)
+{
+	/* sets main post divider & divider bytes, but does not write them */
+	struct tda18271_priv *priv = fe->tuner_priv;
+	unsigned char *regs = priv->tda18271_regs;
+	u8 d, pd;
+	u32 div;
+
+	int ret = tda18271_lookup_pll_map(fe, MAIN_PLL, &freq, &pd, &d);
+	if (tda_fail(ret))
+		goto fail;
+
+	regs[R_MPD]   = (0x7f & pd);
+
+	div =  ((d * (freq / 1000)) << 7) / 125;
+
+	regs[R_MD1]   = 0x7f & (div >> 16);
+	regs[R_MD2]   = 0xff & (div >> 8);
+	regs[R_MD3]   = 0xff & div;
+fail:
+	return ret;
+}
+
+int tda18271_calc_cal_pll(struct dvb_frontend *fe, u32 freq)
+{
+	/* sets cal post divider & divider bytes, but does not write them */
+	struct tda18271_priv *priv = fe->tuner_priv;
+	unsigned char *regs = priv->tda18271_regs;
+	u8 d, pd;
+	u32 div;
+
+	int ret = tda18271_lookup_pll_map(fe, CAL_PLL, &freq, &pd, &d);
+	if (tda_fail(ret))
+		goto fail;
+
+	regs[R_CPD]   = pd;
+
+	div =  ((d * (freq / 1000)) << 7) / 125;
+
+	regs[R_CD1]   = 0x7f & (div >> 16);
+	regs[R_CD2]   = 0xff & (div >> 8);
+	regs[R_CD3]   = 0xff & div;
+fail:
+	return ret;
+}
+
+/*---------------------------------------------------------------------*/
+
+int tda18271_calc_bp_filter(struct dvb_frontend *fe, u32 *freq)
+{
+	/* sets bp filter bits, but does not write them */
+	struct tda18271_priv *priv = fe->tuner_priv;
+	unsigned char *regs = priv->tda18271_regs;
+	u8 val;
+
+	int ret = tda18271_lookup_map(fe, BP_FILTER, freq, &val);
+	if (tda_fail(ret))
+		goto fail;
+
+	regs[R_EP1]  &= ~0x07; /* clear bp filter bits */
+	regs[R_EP1]  |= (0x07 & val);
+fail:
+	return ret;
+}
+
+int tda18271_calc_km(struct dvb_frontend *fe, u32 *freq)
+{
+	/* sets K & M bits, but does not write them */
+	struct tda18271_priv *priv = fe->tuner_priv;
+	unsigned char *regs = priv->tda18271_regs;
+	u8 val;
+
+	int ret = tda18271_lookup_map(fe, RF_CAL_KMCO, freq, &val);
+	if (tda_fail(ret))
+		goto fail;
+
+	regs[R_EB13] &= ~0x7c; /* clear k & m bits */
+	regs[R_EB13] |= (0x7c & val);
+fail:
+	return ret;
+}
+
+int tda18271_calc_rf_band(struct dvb_frontend *fe, u32 *freq)
+{
+	/* sets rf band bits, but does not write them */
+	struct tda18271_priv *priv = fe->tuner_priv;
+	unsigned char *regs = priv->tda18271_regs;
+	u8 val;
+
+	int ret = tda18271_lookup_map(fe, RF_BAND, freq, &val);
+	if (tda_fail(ret))
+		goto fail;
+
+	regs[R_EP2]  &= ~0xe0; /* clear rf band bits */
+	regs[R_EP2]  |= (0xe0 & (val << 5));
+fail:
+	return ret;
+}
+
+int tda18271_calc_gain_taper(struct dvb_frontend *fe, u32 *freq)
+{
+	/* sets gain taper bits, but does not write them */
+	struct tda18271_priv *priv = fe->tuner_priv;
+	unsigned char *regs = priv->tda18271_regs;
+	u8 val;
+
+	int ret = tda18271_lookup_map(fe, GAIN_TAPER, freq, &val);
+	if (tda_fail(ret))
+		goto fail;
+
+	regs[R_EP2]  &= ~0x1f; /* clear gain taper bits */
+	regs[R_EP2]  |= (0x1f & val);
+fail:
+	return ret;
+}
+
+int tda18271_calc_ir_measure(struct dvb_frontend *fe, u32 *freq)
+{
+	/* sets IR Meas bits, but does not write them */
+	struct tda18271_priv *priv = fe->tuner_priv;
+	unsigned char *regs = priv->tda18271_regs;
+	u8 val;
+
+	int ret = tda18271_lookup_map(fe, IR_MEASURE, freq, &val);
+	if (tda_fail(ret))
+		goto fail;
+
+	regs[R_EP5] &= ~0x07;
+	regs[R_EP5] |= (0x07 & val);
+fail:
+	return ret;
+}
+
+int tda18271_calc_rf_cal(struct dvb_frontend *fe, u32 *freq)
+{
+	/* sets rf cal byte (RFC_Cprog), but does not write it */
+	struct tda18271_priv *priv = fe->tuner_priv;
+	unsigned char *regs = priv->tda18271_regs;
+	u8 val;
+
+	int ret = tda18271_lookup_map(fe, RF_CAL, freq, &val);
+	/* The TDA18271HD/C1 rf_cal map lookup is expected to go out of range
+	 * for frequencies above 61.1 MHz.  In these cases, the internal RF
+	 * tracking filters calibration mechanism is used.
+	 *
+	 * There is no need to warn the user about this.
+	 */
+	if (ret < 0)
+		goto fail;
+
+	regs[R_EB14] = val;
+fail:
+	return ret;
+}
+
+void _tda_printk(struct tda18271_priv *state, const char *level,
+		 const char *func, const char *fmt, ...)
+{
+	struct va_format vaf;
+	va_list args;
+
+	va_start(args, fmt);
+
+	vaf.fmt = fmt;
+	vaf.va = &args;
+
+	if (state)
+		printk("%s%s: [%d-%04x|%c] %pV",
+		       level, func, i2c_adapter_id(state->i2c_props.adap),
+		       state->i2c_props.addr,
+		       (state->role == TDA18271_MASTER) ? 'M' : 'S',
+		       &vaf);
+	else
+		printk("%s%s: %pV", level, func, &vaf);
+
+	va_end(args);
+}