Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1414 insertions, 0 deletions

diff --git a/drivers/media/usb/dvb-usb-v2/anysee.c b/drivers/media/usb/dvb-usb-v2/anysee.c
new file mode 100644
index 000000000..aa45b5d26
--- /dev/null
+++ b/drivers/media/usb/dvb-usb-v2/anysee.c
@@ -0,0 +1,1414 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver
+ *
+ * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
+ *
+ * TODO:
+ * - add smart card reader support for Conditional Access (CA)
+ *
+ * Card reader in Anysee is nothing more than ISO 7816 card reader.
+ * There is no hardware CAM in any Anysee device sold.
+ * In my understanding it should be implemented by making own module
+ * for ISO 7816 card reader, like dvb_ca_en50221 is implemented. This
+ * module registers serial interface that can be used to communicate
+ * with any ISO 7816 smart card.
+ *
+ * Any help according to implement serial smart card reader support
+ * is highly welcome!
+ */
+
+#include "anysee.h"
+#include "dvb-pll.h"
+#include "tda1002x.h"
+#include "mt352.h"
+#include "mt352_priv.h"
+#include "zl10353.h"
+#include "tda18212.h"
+#include "cx24116.h"
+#include "stv0900.h"
+#include "stv6110.h"
+#include "isl6423.h"
+#include "cxd2820r.h"
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+static int anysee_ctrl_msg(struct dvb_usb_device *d,
+		u8 *sbuf, u8 slen, u8 *rbuf, u8 rlen)
+{
+	struct anysee_state *state = d_to_priv(d);
+	int act_len, ret, i;
+
+	mutex_lock(&d->usb_mutex);
+
+	memcpy(&state->buf[0], sbuf, slen);
+	state->buf[60] = state->seq++;
+
+	dev_dbg(&d->udev->dev, "%s: >>> %*ph\n", __func__, slen, state->buf);
+
+	/* We need receive one message more after dvb_usb_generic_rw due
+	   to weird transaction flow, which is 1 x send + 2 x receive. */
+	ret = dvb_usbv2_generic_rw_locked(d, state->buf, sizeof(state->buf),
+			state->buf, sizeof(state->buf));
+	if (ret)
+		goto error_unlock;
+
+	/* TODO FIXME: dvb_usb_generic_rw() fails rarely with error code -32
+	 * (EPIPE, Broken pipe). Function supports currently msleep() as a
+	 * parameter but I would not like to use it, since according to
+	 * Documentation/timers/timers-howto.rst it should not be used such
+	 * short, under < 20ms, sleeps. Repeating failed message would be
+	 * better choice as not to add unwanted delays...
+	 * Fixing that correctly is one of those or both;
+	 * 1) use repeat if possible
+	 * 2) add suitable delay
+	 */
+
+	/* get answer, retry few times if error returned */
+	for (i = 0; i < 3; i++) {
+		/* receive 2nd answer */
+		ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev,
+				d->props->generic_bulk_ctrl_endpoint),
+				state->buf, sizeof(state->buf), &act_len, 2000);
+		if (ret) {
+			dev_dbg(&d->udev->dev,
+					"%s: recv bulk message failed=%d\n",
+					__func__, ret);
+		} else {
+			dev_dbg(&d->udev->dev, "%s: <<< %*ph\n", __func__,
+					rlen, state->buf);
+
+			if (state->buf[63] != 0x4f)
+				dev_dbg(&d->udev->dev,
+						"%s: cmd failed\n", __func__);
+			break;
+		}
+	}
+
+	if (ret) {
+		/* all retries failed, it is fatal */
+		dev_err(&d->udev->dev, "%s: recv bulk message failed=%d\n",
+				KBUILD_MODNAME, ret);
+		goto error_unlock;
+	}
+
+	/* read request, copy returned data to return buf */
+	if (rbuf && rlen)
+		memcpy(rbuf, state->buf, rlen);
+
+error_unlock:
+	mutex_unlock(&d->usb_mutex);
+	return ret;
+}
+
+static int anysee_read_reg(struct dvb_usb_device *d, u16 reg, u8 *val)
+{
+	u8 buf[] = {CMD_REG_READ, reg >> 8, reg & 0xff, 0x01};
+	int ret;
+	ret = anysee_ctrl_msg(d, buf, sizeof(buf), val, 1);
+	dev_dbg(&d->udev->dev, "%s: reg=%04x val=%02x\n", __func__, reg, *val);
+	return ret;
+}
+
+static int anysee_write_reg(struct dvb_usb_device *d, u16 reg, u8 val)
+{
+	u8 buf[] = {CMD_REG_WRITE, reg >> 8, reg & 0xff, 0x01, val};
+	dev_dbg(&d->udev->dev, "%s: reg=%04x val=%02x\n", __func__, reg, val);
+	return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+}
+
+/* write single register with mask */
+static int anysee_wr_reg_mask(struct dvb_usb_device *d, u16 reg, u8 val,
+	u8 mask)
+{
+	int ret;
+	u8 tmp;
+
+	/* no need for read if whole reg is written */
+	if (mask != 0xff) {
+		ret = anysee_read_reg(d, reg, &tmp);
+		if (ret)
+			return ret;
+
+		val &= mask;
+		tmp &= ~mask;
+		val |= tmp;
+	}
+
+	return anysee_write_reg(d, reg, val);
+}
+
+/* read single register with mask */
+static int anysee_rd_reg_mask(struct dvb_usb_device *d, u16 reg, u8 *val,
+	u8 mask)
+{
+	int ret, i;
+	u8 tmp;
+
+	ret = anysee_read_reg(d, reg, &tmp);
+	if (ret)
+		return ret;
+
+	tmp &= mask;
+
+	/* find position of the first bit */
+	for (i = 0; i < 8; i++) {
+		if ((mask >> i) & 0x01)
+			break;
+	}
+	*val = tmp >> i;
+
+	return 0;
+}
+
+static int anysee_get_hw_info(struct dvb_usb_device *d, u8 *id)
+{
+	u8 buf[] = {CMD_GET_HW_INFO};
+	return anysee_ctrl_msg(d, buf, sizeof(buf), id, 3);
+}
+
+static int anysee_streaming_ctrl(struct dvb_frontend *fe, int onoff)
+{
+	u8 buf[] = {CMD_STREAMING_CTRL, (u8)onoff, 0x00};
+	dev_dbg(&fe_to_d(fe)->udev->dev, "%s: onoff=%d\n", __func__, onoff);
+	return anysee_ctrl_msg(fe_to_d(fe), buf, sizeof(buf), NULL, 0);
+}
+
+static int anysee_led_ctrl(struct dvb_usb_device *d, u8 mode, u8 interval)
+{
+	u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x01, mode, interval};
+	dev_dbg(&d->udev->dev, "%s: state=%d interval=%d\n", __func__,
+			mode, interval);
+	return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+}
+
+static int anysee_ir_ctrl(struct dvb_usb_device *d, u8 onoff)
+{
+	u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x02, onoff};
+	dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
+	return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+}
+
+/* I2C */
+static int anysee_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
+	int num)
+{
+	struct dvb_usb_device *d = i2c_get_adapdata(adap);
+	int ret = 0, inc, i = 0;
+	u8 buf[52]; /* 4 + 48 (I2C WR USB command header + I2C WR max) */
+
+	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+		return -EAGAIN;
+
+	while (i < num) {
+		if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
+			if (msg[i].len > 2 || msg[i+1].len > 60) {
+				ret = -EOPNOTSUPP;
+				break;
+			}
+			buf[0] = CMD_I2C_READ;
+			buf[1] = (msg[i].addr << 1) | 0x01;
+			buf[2] = msg[i].buf[0];
+			buf[3] = msg[i].buf[1];
+			buf[4] = msg[i].len-1;
+			buf[5] = msg[i+1].len;
+			ret = anysee_ctrl_msg(d, buf, 6, msg[i+1].buf,
+				msg[i+1].len);
+			inc = 2;
+		} else {
+			if (msg[i].len > 48) {
+				ret = -EOPNOTSUPP;
+				break;
+			}
+			buf[0] = CMD_I2C_WRITE;
+			buf[1] = (msg[i].addr << 1);
+			buf[2] = msg[i].len;
+			buf[3] = 0x01;
+			memcpy(&buf[4], msg[i].buf, msg[i].len);
+			ret = anysee_ctrl_msg(d, buf, 4 + msg[i].len, NULL, 0);
+			inc = 1;
+		}
+		if (ret)
+			break;
+
+		i += inc;
+	}
+
+	mutex_unlock(&d->i2c_mutex);
+
+	return ret ? ret : i;
+}
+
+static u32 anysee_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm anysee_i2c_algo = {
+	.master_xfer   = anysee_master_xfer,
+	.functionality = anysee_i2c_func,
+};
+
+static int anysee_mt352_demod_init(struct dvb_frontend *fe)
+{
+	static u8 clock_config[]   = { CLOCK_CTL,  0x38, 0x28 };
+	static u8 reset[]          = { RESET,      0x80 };
+	static u8 adc_ctl_1_cfg[]  = { ADC_CTL_1,  0x40 };
+	static u8 agc_cfg[]        = { AGC_TARGET, 0x28, 0x20 };
+	static u8 gpp_ctl_cfg[]    = { GPP_CTL,    0x33 };
+	static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
+
+	mt352_write(fe, clock_config,   sizeof(clock_config));
+	udelay(200);
+	mt352_write(fe, reset,          sizeof(reset));
+	mt352_write(fe, adc_ctl_1_cfg,  sizeof(adc_ctl_1_cfg));
+
+	mt352_write(fe, agc_cfg,        sizeof(agc_cfg));
+	mt352_write(fe, gpp_ctl_cfg,    sizeof(gpp_ctl_cfg));
+	mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
+
+	return 0;
+}
+
+/* Callbacks for DVB USB */
+static struct tda10023_config anysee_tda10023_config = {
+	.demod_address = (0x1a >> 1),
+	.invert = 0,
+	.xtal   = 16000000,
+	.pll_m  = 11,
+	.pll_p  = 3,
+	.pll_n  = 1,
+	.output_mode = TDA10023_OUTPUT_MODE_PARALLEL_C,
+	.deltaf = 0xfeeb,
+};
+
+static struct mt352_config anysee_mt352_config = {
+	.demod_address = (0x1e >> 1),
+	.demod_init    = anysee_mt352_demod_init,
+};
+
+static struct zl10353_config anysee_zl10353_config = {
+	.demod_address = (0x1e >> 1),
+	.parallel_ts = 1,
+};
+
+static struct zl10353_config anysee_zl10353_tda18212_config2 = {
+	.demod_address = (0x1e >> 1),
+	.parallel_ts = 1,
+	.disable_i2c_gate_ctrl = 1,
+	.no_tuner = 1,
+	.if2 = 41500,
+};
+
+static struct zl10353_config anysee_zl10353_tda18212_config = {
+	.demod_address = (0x18 >> 1),
+	.parallel_ts = 1,
+	.disable_i2c_gate_ctrl = 1,
+	.no_tuner = 1,
+	.if2 = 41500,
+};
+
+static struct tda10023_config anysee_tda10023_tda18212_config = {
+	.demod_address = (0x1a >> 1),
+	.xtal   = 16000000,
+	.pll_m  = 12,
+	.pll_p  = 3,
+	.pll_n  = 1,
+	.output_mode = TDA10023_OUTPUT_MODE_PARALLEL_B,
+	.deltaf = 0xba02,
+};
+
+static const struct tda18212_config anysee_tda18212_config = {
+	.if_dvbt_6 = 4150,
+	.if_dvbt_7 = 4150,
+	.if_dvbt_8 = 4150,
+	.if_dvbc = 5000,
+};
+
+static const struct tda18212_config anysee_tda18212_config2 = {
+	.if_dvbt_6 = 3550,
+	.if_dvbt_7 = 3700,
+	.if_dvbt_8 = 4150,
+	.if_dvbt2_6 = 3250,
+	.if_dvbt2_7 = 4000,
+	.if_dvbt2_8 = 4000,
+	.if_dvbc = 5000,
+};
+
+static struct cx24116_config anysee_cx24116_config = {
+	.demod_address = (0xaa >> 1),
+	.mpg_clk_pos_pol = 0x00,
+	.i2c_wr_max = 48,
+};
+
+static struct stv0900_config anysee_stv0900_config = {
+	.demod_address = (0xd0 >> 1),
+	.demod_mode = 0,
+	.xtal = 8000000,
+	.clkmode = 3,
+	.diseqc_mode = 2,
+	.tun1_maddress = 0,
+	.tun1_adc = 1, /* 1 Vpp */
+	.path1_mode = 3,
+};
+
+static struct stv6110_config anysee_stv6110_config = {
+	.i2c_address = (0xc0 >> 1),
+	.mclk = 16000000,
+	.clk_div = 1,
+};
+
+static struct isl6423_config anysee_isl6423_config = {
+	.current_max = SEC_CURRENT_800m,
+	.curlim  = SEC_CURRENT_LIM_OFF,
+	.mod_extern = 1,
+	.addr = (0x10 >> 1),
+};
+
+static struct cxd2820r_config anysee_cxd2820r_config = {
+	.i2c_address = 0x6d, /* (0xda >> 1) */
+	.ts_mode = 0x38,
+};
+
+/*
+ * New USB device strings: Mfr=1, Product=2, SerialNumber=0
+ * Manufacturer: AMT.CO.KR
+ *
+ * E30 VID=04b4 PID=861f HW=2 FW=2.1 Product=????????
+ * PCB: ?
+ * parts: DNOS404ZH102A(MT352, DTT7579(?))
+ *
+ * E30 VID=04b4 PID=861f HW=2 FW=2.1 "anysee-T(LP)"
+ * PCB: PCB 507T (rev1.61)
+ * parts: DNOS404ZH103A(ZL10353, DTT7579(?))
+ * OEA=0a OEB=00 OEC=00 OED=ff OEE=00
+ * IOA=45 IOB=ff IOC=00 IOD=ff IOE=00
+ *
+ * E30 Plus VID=04b4 PID=861f HW=6 FW=1.0 "anysee"
+ * PCB: 507CD (rev1.1)
+ * parts: DNOS404ZH103A(ZL10353, DTT7579(?)), CST56I01
+ * OEA=80 OEB=00 OEC=00 OED=ff OEE=fe
+ * IOA=4f IOB=ff IOC=00 IOD=06 IOE=01
+ * IOD[0] ZL10353 1=enabled
+ * IOA[7] TS 0=enabled
+ * tuner is not behind ZL10353 I2C-gate (no care if gate disabled or not)
+ *
+ * E30 C Plus VID=04b4 PID=861f HW=10 FW=1.0 "anysee-DC(LP)"
+ * PCB: 507DC (rev0.2)
+ * parts: TDA10023, DTOS403IH102B TM, CST56I01
+ * OEA=80 OEB=00 OEC=00 OED=ff OEE=fe
+ * IOA=4f IOB=ff IOC=00 IOD=26 IOE=01
+ * IOD[0] TDA10023 1=enabled
+ *
+ * E30 S2 Plus VID=04b4 PID=861f HW=11 FW=0.1 "anysee-S2(LP)"
+ * PCB: 507SI (rev2.1)
+ * parts: BS2N10WCC01(CX24116, CX24118), ISL6423, TDA8024
+ * OEA=80 OEB=00 OEC=ff OED=ff OEE=fe
+ * IOA=4d IOB=ff IOC=00 IOD=26 IOE=01
+ * IOD[0] CX24116 1=enabled
+ *
+ * E30 C Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
+ * PCB: 507FA (rev0.4)
+ * parts: TDA10023, DTOS403IH102B TM, TDA8024
+ * OEA=80 OEB=00 OEC=ff OED=ff OEE=ff
+ * IOA=4d IOB=ff IOC=00 IOD=00 IOE=c0
+ * IOD[5] TDA10023 1=enabled
+ * IOE[0] tuner 1=enabled
+ *
+ * E30 Combo Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
+ * PCB: 507FA (rev1.1)
+ * parts: ZL10353, TDA10023, DTOS403IH102B TM, TDA8024
+ * OEA=80 OEB=00 OEC=ff OED=ff OEE=ff
+ * IOA=4d IOB=ff IOC=00 IOD=00 IOE=c0
+ * DVB-C:
+ * IOD[5] TDA10023 1=enabled
+ * IOE[0] tuner 1=enabled
+ * DVB-T:
+ * IOD[0] ZL10353 1=enabled
+ * IOE[0] tuner 0=enabled
+ * tuner is behind ZL10353 I2C-gate
+ * tuner is behind TDA10023 I2C-gate
+ *
+ * E7 TC VID=1c73 PID=861f HW=18 FW=0.7 AMTCI=0.5 "anysee-E7TC(LP)"
+ * PCB: 508TC (rev0.6)
+ * parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212)
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
+ * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4
+ * IOA[7] TS 1=enabled
+ * IOE[4] TDA18212 1=enabled
+ * DVB-C:
+ * IOD[6] ZL10353 0=disabled
+ * IOD[5] TDA10023 1=enabled
+ * IOE[0] IF 1=enabled
+ * DVB-T:
+ * IOD[5] TDA10023 0=disabled
+ * IOD[6] ZL10353 1=enabled
+ * IOE[0] IF 0=enabled
+ *
+ * E7 S2 VID=1c73 PID=861f HW=19 FW=0.4 AMTCI=0.5 "anysee-E7S2(LP)"
+ * PCB: 508S2 (rev0.7)
+ * parts: DNBU10512IST(STV0903, STV6110), ISL6423
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
+ * IOA=4d IOB=00 IOC=c4 IOD=08 IOE=e4
+ * IOA[7] TS 1=enabled
+ * IOE[5] STV0903 1=enabled
+ *
+ * E7 T2C VID=1c73 PID=861f HW=20 FW=0.1 AMTCI=0.5 "anysee-E7T2C(LP)"
+ * PCB: 508T2C (rev0.3)
+ * parts: DNOQ44QCH106A(CXD2820R, TDA18212), TDA8024
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
+ * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4
+ * IOA[7] TS 1=enabled
+ * IOE[5] CXD2820R 1=enabled
+ *
+ * E7 PTC VID=1c73 PID=861f HW=21 FW=0.1 AMTCI=?? "anysee-E7PTC(LP)"
+ * PCB: 508PTC (rev0.5)
+ * parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212)
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
+ * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4
+ * IOA[7] TS 1=enabled
+ * IOE[4] TDA18212 1=enabled
+ * DVB-C:
+ * IOD[6] ZL10353 0=disabled
+ * IOD[5] TDA10023 1=enabled
+ * IOE[0] IF 1=enabled
+ * DVB-T:
+ * IOD[5] TDA10023 0=disabled
+ * IOD[6] ZL10353 1=enabled
+ * IOE[0] IF 0=enabled
+ *
+ * E7 PS2 VID=1c73 PID=861f HW=22 FW=0.1 AMTCI=?? "anysee-E7PS2(LP)"
+ * PCB: 508PS2 (rev0.4)
+ * parts: DNBU10512IST(STV0903, STV6110), ISL6423
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
+ * IOA=4d IOB=00 IOC=c4 IOD=08 IOE=e4
+ * IOA[7] TS 1=enabled
+ * IOE[5] STV0903 1=enabled
+ */
+
+static int anysee_read_config(struct dvb_usb_device *d)
+{
+	struct anysee_state *state = d_to_priv(d);
+	int ret;
+	u8 hw_info[3];
+
+	/*
+	 * Check which hardware we have.
+	 * We must do this call two times to get reliable values (hw/fw bug).
+	 */
+	ret = anysee_get_hw_info(d, hw_info);
+	if (ret)
+		goto error;
+
+	ret = anysee_get_hw_info(d, hw_info);
+	if (ret)
+		goto error;
+
+	/*
+	 * Meaning of these info bytes are guessed.
+	 */
+	dev_info(&d->udev->dev, "%s: firmware version %d.%d hardware id %d\n",
+			KBUILD_MODNAME, hw_info[1], hw_info[2], hw_info[0]);
+
+	state->hw = hw_info[0];
+error:
+	return ret;
+}
+
+/* external I2C gate used for DNOD44CDH086A(TDA18212) tuner module */
+static int anysee_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
+{
+	/* enable / disable tuner access on IOE[4] */
+	return anysee_wr_reg_mask(fe_to_d(fe), REG_IOE, (enable << 4), 0x10);
+}
+
+static int anysee_frontend_ctrl(struct dvb_frontend *fe, int onoff)
+{
+	struct anysee_state *state = fe_to_priv(fe);
+	struct dvb_usb_device *d = fe_to_d(fe);
+	int ret;
+	dev_dbg(&d->udev->dev, "%s: fe=%d onoff=%d\n", __func__, fe->id, onoff);
+
+	/* no frontend sleep control */
+	if (onoff == 0)
+		return 0;
+
+	switch (state->hw) {
+	case ANYSEE_HW_507FA: /* 15 */
+		/* E30 Combo Plus */
+		/* E30 C Plus */
+
+		if (fe->id == 0)  {
+			/* disable DVB-T demod on IOD[0] */
+			ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 0), 0x01);
+			if (ret)
+				goto error;
+
+			/* enable DVB-C demod on IOD[5] */
+			ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 5), 0x20);
+			if (ret)
+				goto error;
+
+			/* enable DVB-C tuner on IOE[0] */
+			ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 0), 0x01);
+			if (ret)
+				goto error;
+		} else {
+			/* disable DVB-C demod on IOD[5] */
+			ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 5), 0x20);
+			if (ret)
+				goto error;
+
+			/* enable DVB-T demod on IOD[0] */
+			ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01);
+			if (ret)
+				goto error;
+
+			/* enable DVB-T tuner on IOE[0] */
+			ret = anysee_wr_reg_mask(d, REG_IOE, (0 << 0), 0x01);
+			if (ret)
+				goto error;
+		}
+
+		break;
+	case ANYSEE_HW_508TC: /* 18 */
+	case ANYSEE_HW_508PTC: /* 21 */
+		/* E7 TC */
+		/* E7 PTC */
+
+		if (fe->id == 0)  {
+			/* disable DVB-T demod on IOD[6] */
+			ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 6), 0x40);
+			if (ret)
+				goto error;
+
+			/* enable DVB-C demod on IOD[5] */
+			ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 5), 0x20);
+			if (ret)
+				goto error;
+
+			/* enable IF route on IOE[0] */
+			ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 0), 0x01);
+			if (ret)
+				goto error;
+		} else {
+			/* disable DVB-C demod on IOD[5] */
+			ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 5), 0x20);
+			if (ret)
+				goto error;
+
+			/* enable DVB-T demod on IOD[6] */
+			ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 6), 0x40);
+			if (ret)
+				goto error;
+
+			/* enable IF route on IOE[0] */
+			ret = anysee_wr_reg_mask(d, REG_IOE, (0 << 0), 0x01);
+			if (ret)
+				goto error;
+		}
+
+		break;
+	default:
+		ret = 0;
+	}
+
+error:
+	return ret;
+}
+
+static int anysee_add_i2c_dev(struct dvb_usb_device *d, const char *type,
+		u8 addr, void *platform_data)
+{
+	int ret, num;
+	struct anysee_state *state = d_to_priv(d);
+	struct i2c_client *client;
+	struct i2c_adapter *adapter = &d->i2c_adap;
+	struct i2c_board_info board_info = {
+		.addr = addr,
+		.platform_data = platform_data,
+	};
+
+	strscpy(board_info.type, type, I2C_NAME_SIZE);
+
+	/* find first free client */
+	for (num = 0; num < ANYSEE_I2C_CLIENT_MAX; num++) {
+		if (state->i2c_client[num] == NULL)
+			break;
+	}
+
+	dev_dbg(&d->udev->dev, "%s: num=%d\n", __func__, num);
+
+	if (num == ANYSEE_I2C_CLIENT_MAX) {
+		dev_err(&d->udev->dev, "%s: I2C client out of index\n",
+				KBUILD_MODNAME);
+		ret = -ENODEV;
+		goto err;
+	}
+
+	request_module("%s", board_info.type);
+
+	/* register I2C device */
+	client = i2c_new_client_device(adapter, &board_info);
+	if (!i2c_client_has_driver(client)) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+	/* increase I2C driver usage count */
+	if (!try_module_get(client->dev.driver->owner)) {
+		i2c_unregister_device(client);
+		ret = -ENODEV;
+		goto err;
+	}
+
+	state->i2c_client[num] = client;
+	return 0;
+err:
+	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+	return ret;
+}
+
+static void anysee_del_i2c_dev(struct dvb_usb_device *d)
+{
+	int num;
+	struct anysee_state *state = d_to_priv(d);
+	struct i2c_client *client;
+
+	/* find last used client */
+	num = ANYSEE_I2C_CLIENT_MAX;
+	while (num--) {
+		if (state->i2c_client[num] != NULL)
+			break;
+	}
+
+	dev_dbg(&d->udev->dev, "%s: num=%d\n", __func__, num);
+
+	if (num == -1) {
+		dev_err(&d->udev->dev, "%s: I2C client out of index\n",
+				KBUILD_MODNAME);
+		goto err;
+	}
+
+	client = state->i2c_client[num];
+
+	/* decrease I2C driver usage count */
+	module_put(client->dev.driver->owner);
+
+	/* unregister I2C device */
+	i2c_unregister_device(client);
+
+	state->i2c_client[num] = NULL;
+err:
+	dev_dbg(&d->udev->dev, "%s: failed\n", __func__);
+}
+
+static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct anysee_state *state = adap_to_priv(adap);
+	struct dvb_usb_device *d = adap_to_d(adap);
+	int ret = 0;
+	u8 tmp;
+	struct i2c_msg msg[2] = {
+		{
+			.addr = 0x60,
+			.flags = 0,
+			.len = 1,
+			.buf = "\x00",
+		}, {
+			.addr = 0x60,
+			.flags = I2C_M_RD,
+			.len = 1,
+			.buf = &tmp,
+		}
+	};
+
+	switch (state->hw) {
+	case ANYSEE_HW_507T: /* 2 */
+		/* E30 */
+
+		/* attach demod */
+		adap->fe[0] = dvb_attach(mt352_attach, &anysee_mt352_config,
+				&d->i2c_adap);
+		if (adap->fe[0])
+			break;
+
+		/* attach demod */
+		adap->fe[0] = dvb_attach(zl10353_attach, &anysee_zl10353_config,
+				&d->i2c_adap);
+
+		break;
+	case ANYSEE_HW_507CD: /* 6 */
+		/* E30 Plus */
+
+		/* enable DVB-T demod on IOD[0] */
+		ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01);
+		if (ret)
+			goto error;
+
+		/* enable transport stream on IOA[7] */
+		ret = anysee_wr_reg_mask(d, REG_IOA, (0 << 7), 0x80);
+		if (ret)
+			goto error;
+
+		/* attach demod */
+		adap->fe[0] = dvb_attach(zl10353_attach, &anysee_zl10353_config,
+				&d->i2c_adap);
+
+		break;
+	case ANYSEE_HW_507DC: /* 10 */
+		/* E30 C Plus */
+
+		/* enable DVB-C demod on IOD[0] */
+		ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01);
+		if (ret)
+			goto error;
+
+		/* attach demod */
+		adap->fe[0] = dvb_attach(tda10023_attach,
+				&anysee_tda10023_config, &d->i2c_adap, 0x48);
+
+		break;
+	case ANYSEE_HW_507SI: /* 11 */
+		/* E30 S2 Plus */
+
+		/* enable DVB-S/S2 demod on IOD[0] */
+		ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01);
+		if (ret)
+			goto error;
+
+		/* attach demod */
+		adap->fe[0] = dvb_attach(cx24116_attach, &anysee_cx24116_config,
+				&d->i2c_adap);
+
+		break;
+	case ANYSEE_HW_507FA: /* 15 */
+		/* E30 Combo Plus */
+		/* E30 C Plus */
+
+		/* enable tuner on IOE[4] */
+		ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 4), 0x10);
+		if (ret)
+			goto error;
+
+		/* probe TDA18212 */
+		tmp = 0;
+		ret = i2c_transfer(&d->i2c_adap, msg, 2);
+		if (ret == 2 && tmp == 0xc7) {
+			dev_dbg(&d->udev->dev, "%s: TDA18212 found\n",
+					__func__);
+			state->has_tda18212 = true;
+		}
+		else
+			tmp = 0;
+
+		/* disable tuner on IOE[4] */
+		ret = anysee_wr_reg_mask(d, REG_IOE, (0 << 4), 0x10);
+		if (ret)
+			goto error;
+
+		/* disable DVB-T demod on IOD[0] */
+		ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 0), 0x01);
+		if (ret)
+			goto error;
+
+		/* enable DVB-C demod on IOD[5] */
+		ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 5), 0x20);
+		if (ret)
+			goto error;
+
+		/* attach demod */
+		if (tmp == 0xc7) {
+			/* TDA18212 config */
+			adap->fe[0] = dvb_attach(tda10023_attach,
+					&anysee_tda10023_tda18212_config,
+					&d->i2c_adap, 0x48);
+
+			/* I2C gate for DNOD44CDH086A(TDA18212) tuner module */
+			if (adap->fe[0])
+				adap->fe[0]->ops.i2c_gate_ctrl =
+						anysee_i2c_gate_ctrl;
+		} else {
+			/* PLL config */
+			adap->fe[0] = dvb_attach(tda10023_attach,
+					&anysee_tda10023_config,
+					&d->i2c_adap, 0x48);
+		}
+
+		/* break out if first frontend attaching fails */
+		if (!adap->fe[0])
+			break;
+
+		/* disable DVB-C demod on IOD[5] */
+		ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 5), 0x20);
+		if (ret)
+			goto error;
+
+		/* enable DVB-T demod on IOD[0] */
+		ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01);
+		if (ret)
+			goto error;
+
+		/* attach demod */
+		if (tmp == 0xc7) {
+			/* TDA18212 config */
+			adap->fe[1] = dvb_attach(zl10353_attach,
+					&anysee_zl10353_tda18212_config2,
+					&d->i2c_adap);
+
+			/* I2C gate for DNOD44CDH086A(TDA18212) tuner module */
+			if (adap->fe[1])
+				adap->fe[1]->ops.i2c_gate_ctrl =
+						anysee_i2c_gate_ctrl;
+		} else {
+			/* PLL config */
+			adap->fe[1] = dvb_attach(zl10353_attach,
+					&anysee_zl10353_config,
+					&d->i2c_adap);
+		}
+
+		break;
+	case ANYSEE_HW_508TC: /* 18 */
+	case ANYSEE_HW_508PTC: /* 21 */
+		/* E7 TC */
+		/* E7 PTC */
+
+		/* disable DVB-T demod on IOD[6] */
+		ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 6), 0x40);
+		if (ret)
+			goto error;
+
+		/* enable DVB-C demod on IOD[5] */
+		ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 5), 0x20);
+		if (ret)
+			goto error;
+
+		/* attach demod */
+		adap->fe[0] = dvb_attach(tda10023_attach,
+				&anysee_tda10023_tda18212_config,
+				&d->i2c_adap, 0x48);
+
+		/* I2C gate for DNOD44CDH086A(TDA18212) tuner module */
+		if (adap->fe[0])
+			adap->fe[0]->ops.i2c_gate_ctrl = anysee_i2c_gate_ctrl;
+
+		/* break out if first frontend attaching fails */
+		if (!adap->fe[0])
+			break;
+
+		/* disable DVB-C demod on IOD[5] */
+		ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 5), 0x20);
+		if (ret)
+			goto error;
+
+		/* enable DVB-T demod on IOD[6] */
+		ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 6), 0x40);
+		if (ret)
+			goto error;
+
+		/* attach demod */
+		adap->fe[1] = dvb_attach(zl10353_attach,
+				&anysee_zl10353_tda18212_config,
+				&d->i2c_adap);
+
+		/* I2C gate for DNOD44CDH086A(TDA18212) tuner module */
+		if (adap->fe[1])
+			adap->fe[1]->ops.i2c_gate_ctrl = anysee_i2c_gate_ctrl;
+
+		state->has_ci = true;
+
+		break;
+	case ANYSEE_HW_508S2: /* 19 */
+	case ANYSEE_HW_508PS2: /* 22 */
+		/* E7 S2 */
+		/* E7 PS2 */
+
+		/* enable DVB-S/S2 demod on IOE[5] */
+		ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 5), 0x20);
+		if (ret)
+			goto error;
+
+		/* attach demod */
+		adap->fe[0] = dvb_attach(stv0900_attach,
+				&anysee_stv0900_config, &d->i2c_adap, 0);
+
+		state->has_ci = true;
+
+		break;
+	case ANYSEE_HW_508T2C: /* 20 */
+		/* E7 T2C */
+
+		/* enable DVB-T/T2/C demod on IOE[5] */
+		ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 5), 0x20);
+		if (ret)
+			goto error;
+
+		/* attach demod */
+		adap->fe[0] = dvb_attach(cxd2820r_attach,
+				&anysee_cxd2820r_config, &d->i2c_adap, NULL);
+
+		state->has_ci = true;
+
+		break;
+	}
+
+	if (!adap->fe[0]) {
+		/* we have no frontend :-( */
+		ret = -ENODEV;
+		dev_err(&d->udev->dev,
+				"%s: Unsupported Anysee version. Please report to <linux-media@vger.kernel.org>.\n",
+				KBUILD_MODNAME);
+	}
+error:
+	return ret;
+}
+
+static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct anysee_state *state = adap_to_priv(adap);
+	struct dvb_usb_device *d = adap_to_d(adap);
+	struct dvb_frontend *fe;
+	int ret;
+	dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+	switch (state->hw) {
+	case ANYSEE_HW_507T: /* 2 */
+		/* E30 */
+
+		/* attach tuner */
+		fe = dvb_attach(dvb_pll_attach, adap->fe[0], (0xc2 >> 1), NULL,
+				DVB_PLL_THOMSON_DTT7579);
+
+		break;
+	case ANYSEE_HW_507CD: /* 6 */
+		/* E30 Plus */
+
+		/* attach tuner */
+		fe = dvb_attach(dvb_pll_attach, adap->fe[0], (0xc2 >> 1),
+				&d->i2c_adap, DVB_PLL_THOMSON_DTT7579);
+
+		break;
+	case ANYSEE_HW_507DC: /* 10 */
+		/* E30 C Plus */
+
+		/* attach tuner */
+		fe = dvb_attach(dvb_pll_attach, adap->fe[0], (0xc0 >> 1),
+				&d->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A);
+
+		break;
+	case ANYSEE_HW_507SI: /* 11 */
+		/* E30 S2 Plus */
+
+		/* attach LNB controller */
+		fe = dvb_attach(isl6423_attach, adap->fe[0], &d->i2c_adap,
+				&anysee_isl6423_config);
+
+		break;
+	case ANYSEE_HW_507FA: /* 15 */
+		/* E30 Combo Plus */
+		/* E30 C Plus */
+
+		/* Try first attach TDA18212 silicon tuner on IOE[4], if that
+		 * fails attach old simple PLL. */
+
+		/* attach tuner */
+		if (state->has_tda18212) {
+			struct tda18212_config tda18212_config =
+					anysee_tda18212_config;
+
+			tda18212_config.fe = adap->fe[0];
+			ret = anysee_add_i2c_dev(d, "tda18212", 0x60,
+					&tda18212_config);
+			if (ret)
+				goto err;
+
+			/* copy tuner ops for 2nd FE as tuner is shared */
+			if (adap->fe[1]) {
+				adap->fe[1]->tuner_priv =
+						adap->fe[0]->tuner_priv;
+				memcpy(&adap->fe[1]->ops.tuner_ops,
+						&adap->fe[0]->ops.tuner_ops,
+						sizeof(struct dvb_tuner_ops));
+			}
+
+			return 0;
+		} else {
+			/* attach tuner */
+			fe = dvb_attach(dvb_pll_attach, adap->fe[0],
+					(0xc0 >> 1), &d->i2c_adap,
+					DVB_PLL_SAMSUNG_DTOS403IH102A);
+
+			if (fe && adap->fe[1]) {
+				/* attach tuner for 2nd FE */
+				fe = dvb_attach(dvb_pll_attach, adap->fe[1],
+						(0xc0 >> 1), &d->i2c_adap,
+						DVB_PLL_SAMSUNG_DTOS403IH102A);
+			}
+		}
+
+		break;
+	case ANYSEE_HW_508TC: /* 18 */
+	case ANYSEE_HW_508PTC: /* 21 */
+	{
+		/* E7 TC */
+		/* E7 PTC */
+		struct tda18212_config tda18212_config = anysee_tda18212_config;
+
+		tda18212_config.fe = adap->fe[0];
+		ret = anysee_add_i2c_dev(d, "tda18212", 0x60, &tda18212_config);
+		if (ret)
+			goto err;
+
+		/* copy tuner ops for 2nd FE as tuner is shared */
+		if (adap->fe[1]) {
+			adap->fe[1]->tuner_priv = adap->fe[0]->tuner_priv;
+			memcpy(&adap->fe[1]->ops.tuner_ops,
+					&adap->fe[0]->ops.tuner_ops,
+					sizeof(struct dvb_tuner_ops));
+		}
+
+		return 0;
+	}
+	case ANYSEE_HW_508S2: /* 19 */
+	case ANYSEE_HW_508PS2: /* 22 */
+		/* E7 S2 */
+		/* E7 PS2 */
+
+		/* attach tuner */
+		fe = dvb_attach(stv6110_attach, adap->fe[0],
+				&anysee_stv6110_config, &d->i2c_adap);
+
+		if (fe) {
+			/* attach LNB controller */
+			fe = dvb_attach(isl6423_attach, adap->fe[0],
+					&d->i2c_adap, &anysee_isl6423_config);
+		}
+
+		break;
+
+	case ANYSEE_HW_508T2C: /* 20 */
+	{
+		/* E7 T2C */
+		struct tda18212_config tda18212_config =
+				anysee_tda18212_config2;
+
+		tda18212_config.fe = adap->fe[0];
+		ret = anysee_add_i2c_dev(d, "tda18212", 0x60, &tda18212_config);
+		if (ret)
+			goto err;
+
+		return 0;
+	}
+	default:
+		fe = NULL;
+	}
+
+	if (fe)
+		ret = 0;
+	else
+		ret = -ENODEV;
+err:
+	return ret;
+}
+
+#if IS_ENABLED(CONFIG_RC_CORE)
+static int anysee_rc_query(struct dvb_usb_device *d)
+{
+	u8 buf[] = {CMD_GET_IR_CODE};
+	u8 ircode[2];
+	int ret;
+
+	/* Remote controller is basic NEC using address byte 0x08.
+	   Anysee device RC query returns only two bytes, status and code,
+	   address byte is dropped. Also it does not return any value for
+	   NEC RCs having address byte other than 0x08. Due to that, we
+	   cannot use that device as standard NEC receiver.
+	   It could be possible make hack which reads whole code directly
+	   from device memory... */
+
+	ret = anysee_ctrl_msg(d, buf, sizeof(buf), ircode, sizeof(ircode));
+	if (ret)
+		return ret;
+
+	if (ircode[0]) {
+		dev_dbg(&d->udev->dev, "%s: key pressed %02x\n", __func__,
+				ircode[1]);
+		rc_keydown(d->rc_dev, RC_PROTO_NEC,
+			   RC_SCANCODE_NEC(0x08, ircode[1]), 0);
+	}
+
+	return 0;
+}
+
+static int anysee_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc)
+{
+	rc->allowed_protos = RC_PROTO_BIT_NEC;
+	rc->query          = anysee_rc_query;
+	rc->interval       = 250;  /* windows driver uses 500ms */
+
+	return 0;
+}
+#else
+	#define anysee_get_rc_config NULL
+#endif
+
+static int anysee_ci_read_attribute_mem(struct dvb_ca_en50221 *ci, int slot,
+	int addr)
+{
+	struct dvb_usb_device *d = ci->data;
+	int ret;
+	u8 buf[] = {CMD_CI, 0x02, 0x40 | addr >> 8, addr & 0xff, 0x00, 1};
+	u8 val;
+
+	ret = anysee_ctrl_msg(d, buf, sizeof(buf), &val, 1);
+	if (ret)
+		return ret;
+
+	return val;
+}
+
+static int anysee_ci_write_attribute_mem(struct dvb_ca_en50221 *ci, int slot,
+	int addr, u8 val)
+{
+	struct dvb_usb_device *d = ci->data;
+	u8 buf[] = {CMD_CI, 0x03, 0x40 | addr >> 8, addr & 0xff, 0x00, 1, val};
+
+	return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+}
+
+static int anysee_ci_read_cam_control(struct dvb_ca_en50221 *ci, int slot,
+	u8 addr)
+{
+	struct dvb_usb_device *d = ci->data;
+	int ret;
+	u8 buf[] = {CMD_CI, 0x04, 0x40, addr, 0x00, 1};
+	u8 val;
+
+	ret = anysee_ctrl_msg(d, buf, sizeof(buf), &val, 1);
+	if (ret)
+		return ret;
+
+	return val;
+}
+
+static int anysee_ci_write_cam_control(struct dvb_ca_en50221 *ci, int slot,
+	u8 addr, u8 val)
+{
+	struct dvb_usb_device *d = ci->data;
+	u8 buf[] = {CMD_CI, 0x05, 0x40, addr, 0x00, 1, val};
+
+	return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+}
+
+static int anysee_ci_slot_reset(struct dvb_ca_en50221 *ci, int slot)
+{
+	struct dvb_usb_device *d = ci->data;
+	int ret;
+	struct anysee_state *state = d_to_priv(d);
+
+	state->ci_cam_ready = jiffies + msecs_to_jiffies(1000);
+
+	ret = anysee_wr_reg_mask(d, REG_IOA, (0 << 7), 0x80);
+	if (ret)
+		return ret;
+
+	msleep(300);
+
+	ret = anysee_wr_reg_mask(d, REG_IOA, (1 << 7), 0x80);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int anysee_ci_slot_shutdown(struct dvb_ca_en50221 *ci, int slot)
+{
+	struct dvb_usb_device *d = ci->data;
+	int ret;
+
+	ret = anysee_wr_reg_mask(d, REG_IOA, (0 << 7), 0x80);
+	if (ret)
+		return ret;
+
+	msleep(30);
+
+	ret = anysee_wr_reg_mask(d, REG_IOA, (1 << 7), 0x80);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int anysee_ci_slot_ts_enable(struct dvb_ca_en50221 *ci, int slot)
+{
+	struct dvb_usb_device *d = ci->data;
+
+	return anysee_wr_reg_mask(d, REG_IOD, (0 << 1), 0x02);
+}
+
+static int anysee_ci_poll_slot_status(struct dvb_ca_en50221 *ci, int slot,
+	int open)
+{
+	struct dvb_usb_device *d = ci->data;
+	struct anysee_state *state = d_to_priv(d);
+	int ret;
+	u8 tmp = 0;
+
+	ret = anysee_rd_reg_mask(d, REG_IOC, &tmp, 0x40);
+	if (ret)
+		return ret;
+
+	if (tmp == 0) {
+		ret = DVB_CA_EN50221_POLL_CAM_PRESENT;
+		if (time_after(jiffies, state->ci_cam_ready))
+			ret |= DVB_CA_EN50221_POLL_CAM_READY;
+	}
+
+	return ret;
+}
+
+static int anysee_ci_init(struct dvb_usb_device *d)
+{
+	struct anysee_state *state = d_to_priv(d);
+	int ret;
+
+	state->ci.owner               = THIS_MODULE;
+	state->ci.read_attribute_mem  = anysee_ci_read_attribute_mem;
+	state->ci.write_attribute_mem = anysee_ci_write_attribute_mem;
+	state->ci.read_cam_control    = anysee_ci_read_cam_control;
+	state->ci.write_cam_control   = anysee_ci_write_cam_control;
+	state->ci.slot_reset          = anysee_ci_slot_reset;
+	state->ci.slot_shutdown       = anysee_ci_slot_shutdown;
+	state->ci.slot_ts_enable      = anysee_ci_slot_ts_enable;
+	state->ci.poll_slot_status    = anysee_ci_poll_slot_status;
+	state->ci.data                = d;
+
+	ret = anysee_wr_reg_mask(d, REG_IOA, (1 << 7), 0x80);
+	if (ret)
+		return ret;
+
+	ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 2)|(0 << 1)|(0 << 0), 0x07);
+	if (ret)
+		return ret;
+
+	ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 2)|(1 << 1)|(1 << 0), 0x07);
+	if (ret)
+		return ret;
+
+	ret = dvb_ca_en50221_init(&d->adapter[0].dvb_adap, &state->ci, 0, 1);
+	if (ret)
+		return ret;
+
+	state->ci_attached = true;
+
+	return 0;
+}
+
+static void anysee_ci_release(struct dvb_usb_device *d)
+{
+	struct anysee_state *state = d_to_priv(d);
+
+	/* detach CI */
+	if (state->ci_attached)
+		dvb_ca_en50221_release(&state->ci);
+
+	return;
+}
+
+static int anysee_init(struct dvb_usb_device *d)
+{
+	struct anysee_state *state = d_to_priv(d);
+	int ret;
+
+	/* There is one interface with two alternate settings.
+	   Alternate setting 0 is for bulk transfer.
+	   Alternate setting 1 is for isochronous transfer.
+	   We use bulk transfer (alternate setting 0). */
+	ret = usb_set_interface(d->udev, 0, 0);
+	if (ret)
+		return ret;
+
+	/* LED light */
+	ret = anysee_led_ctrl(d, 0x01, 0x03);
+	if (ret)
+		return ret;
+
+	/* enable IR */
+	ret = anysee_ir_ctrl(d, 1);
+	if (ret)
+		return ret;
+
+	/* attach CI */
+	if (state->has_ci) {
+		ret = anysee_ci_init(d);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static void anysee_exit(struct dvb_usb_device *d)
+{
+	struct anysee_state *state = d_to_priv(d);
+
+	if (state->i2c_client[0])
+		anysee_del_i2c_dev(d);
+
+	return anysee_ci_release(d);
+}
+
+/* DVB USB Driver stuff */
+static struct dvb_usb_device_properties anysee_props = {
+	.driver_name = KBUILD_MODNAME,
+	.owner = THIS_MODULE,
+	.adapter_nr = adapter_nr,
+	.size_of_priv = sizeof(struct anysee_state),
+
+	.generic_bulk_ctrl_endpoint = 0x01,
+	.generic_bulk_ctrl_endpoint_response = 0x81,
+
+	.i2c_algo         = &anysee_i2c_algo,
+	.read_config      = anysee_read_config,
+	.frontend_attach  = anysee_frontend_attach,
+	.tuner_attach     = anysee_tuner_attach,
+	.init             = anysee_init,
+	.get_rc_config    = anysee_get_rc_config,
+	.frontend_ctrl    = anysee_frontend_ctrl,
+	.streaming_ctrl   = anysee_streaming_ctrl,
+	.exit             = anysee_exit,
+
+	.num_adapters = 1,
+	.adapter = {
+		{
+			.stream = DVB_USB_STREAM_BULK(0x82, 8, 16 * 512),
+		}
+	}
+};
+
+static const struct usb_device_id anysee_id_table[] = {
+	{ DVB_USB_DEVICE(USB_VID_CYPRESS, USB_PID_ANYSEE,
+		&anysee_props, "Anysee", RC_MAP_ANYSEE) },
+	{ DVB_USB_DEVICE(USB_VID_AMT, USB_PID_ANYSEE,
+		&anysee_props, "Anysee", RC_MAP_ANYSEE) },
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, anysee_id_table);
+
+static struct usb_driver anysee_usb_driver = {
+	.name = KBUILD_MODNAME,
+	.id_table = anysee_id_table,
+	.probe = dvb_usbv2_probe,
+	.disconnect = dvb_usbv2_disconnect,
+	.suspend = dvb_usbv2_suspend,
+	.resume = dvb_usbv2_resume,
+	.reset_resume = dvb_usbv2_reset_resume,
+	.no_dynamic_id = 1,
+	.soft_unbind = 1,
+};
+
+module_usb_driver(anysee_usb_driver);
+
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_DESCRIPTION("Driver Anysee E30 DVB-C & DVB-T USB2.0");
+MODULE_LICENSE("GPL");