diff options
| author |  Linus Torvalds <torvalds@linux-foundation.org> | 2023-02-21 18:24:12 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2023-02-21 18:24:12 -0800 |
| commit | 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 (patch) | |
| tree | cc5c2d0a898769fd59549594fedb3ee6f84e59a0 /drivers/media/usb/dvb-usb-v2/anysee.h | |
| download | linux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.tar.gz linux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.zip | |
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
Diffstat (limited to 'drivers/media/usb/dvb-usb-v2/anysee.h')
| -rw-r--r-- | drivers/media/usb/dvb-usb-v2/anysee.h | 317 |
1 files changed, 317 insertions, 0 deletions
diff --git a/drivers/media/usb/dvb-usb-v2/anysee.h b/drivers/media/usb/dvb-usb-v2/anysee.h new file mode 100644 index 000000000..3e4015cd6 --- /dev/null +++ b/drivers/media/usb/dvb-usb-v2/anysee.h @@ -0,0 +1,317 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver + * + * Copyright (C) 2007 Antti Palosaari <crope@iki.fi> + * + * TODO: + * - add smart card reader support for Conditional Access (CA) + * + * Card reader in Anysee is nothing more than ISO 7816 card reader. + * There is no hardware CAM in any Anysee device sold. + * In my understanding it should be implemented by making own module + * for ISO 7816 card reader, like dvb_ca_en50221 is implemented. This + * module registers serial interface that can be used to communicate + * with any ISO 7816 smart card. + * + * Any help according to implement serial smart card reader support + * is highly welcome! + */ + +#ifndef _DVB_USB_ANYSEE_H_ +#define _DVB_USB_ANYSEE_H_ + +#define DVB_USB_LOG_PREFIX "anysee" +#include "dvb_usb.h" +#include <media/dvb_ca_en50221.h> + +enum cmd { + CMD_I2C_READ = 0x33, + CMD_I2C_WRITE = 0x31, + CMD_REG_READ = 0xb0, + CMD_REG_WRITE = 0xb1, + CMD_STREAMING_CTRL = 0x12, + CMD_LED_AND_IR_CTRL = 0x16, + CMD_GET_IR_CODE = 0x41, + CMD_GET_HW_INFO = 0x19, + CMD_SMARTCARD = 0x34, + CMD_CI = 0x37, +}; + +struct anysee_state { + u8 buf[64]; + u8 seq; + u8 hw; /* PCB ID */ + #define ANYSEE_I2C_CLIENT_MAX 1 + struct i2c_client *i2c_client[ANYSEE_I2C_CLIENT_MAX]; + u8 fe_id:1; /* frondend ID */ + u8 has_ci:1; + u8 has_tda18212:1; + u8 ci_attached:1; + struct dvb_ca_en50221 ci; + unsigned long ci_cam_ready; /* jiffies */ +}; + +#define ANYSEE_HW_507T 2 /* E30 */ +#define ANYSEE_HW_507CD 6 /* E30 Plus */ +#define ANYSEE_HW_507DC 10 /* E30 C Plus */ +#define ANYSEE_HW_507SI 11 /* E30 S2 Plus */ +#define ANYSEE_HW_507FA 15 /* E30 Combo Plus / E30 C Plus */ +#define ANYSEE_HW_508TC 18 /* E7 TC */ +#define ANYSEE_HW_508S2 19 /* E7 S2 */ +#define ANYSEE_HW_508T2C 20 /* E7 T2C */ +#define ANYSEE_HW_508PTC 21 /* E7 PTC Plus */ +#define ANYSEE_HW_508PS2 22 /* E7 PS2 Plus */ + +#define REG_IOA 0x80 /* Port A (bit addressable) */ +#define REG_IOB 0x90 /* Port B (bit addressable) */ +#define REG_IOC 0xa0 /* Port C (bit addressable) */ +#define REG_IOD 0xb0 /* Port D (bit addressable) */ +#define REG_IOE 0xb1 /* Port E (NOT bit addressable) */ +#define REG_OEA 0xb2 /* Port A Output Enable */ +#define REG_OEB 0xb3 /* Port B Output Enable */ +#define REG_OEC 0xb4 /* Port C Output Enable */ +#define REG_OED 0xb5 /* Port D Output Enable */ +#define REG_OEE 0xb6 /* Port E Output Enable */ + +#endif + +/*************************************************************************** + * USB API description (reverse engineered) + *************************************************************************** + +Transaction flow: +================= +BULK[00001] >>> REQUEST PACKET 64 bytes +BULK[00081] <<< REPLY PACKET #1 64 bytes (PREVIOUS TRANSACTION REPLY) +BULK[00081] <<< REPLY PACKET #2 64 bytes (CURRENT TRANSACTION REPLY) + +General reply packet(s) are always used if not own reply defined. + +============================================================================ +| 00-63 | GENERAL REPLY PACKET #1 (PREVIOUS REPLY) +============================================================================ +| 00 | reply data (if any) from previous transaction +| | Just same reply packet as returned during previous transaction. +| | Needed only if reply is missed in previous transaction. +| | Just skip normally. +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | GENERAL REPLY PACKET #2 (CURRENT REPLY) +============================================================================ +| 00 | reply data (if any) +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | I2C WRITE REQUEST PACKET +============================================================================ +| 00 | 0x31 I2C write command +---------------------------------------------------------------------------- +| 01 | i2c address +---------------------------------------------------------------------------- +| 02 | data length +| | 0x02 (for typical I2C reg / val pair) +---------------------------------------------------------------------------- +| 03 | 0x01 +---------------------------------------------------------------------------- +| 04- | data +---------------------------------------------------------------------------- +| -59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | I2C READ REQUEST PACKET +============================================================================ +| 00 | 0x33 I2C read command +---------------------------------------------------------------------------- +| 01 | i2c address + 1 +---------------------------------------------------------------------------- +| 02 | register +---------------------------------------------------------------------------- +| 03 | 0x00 +---------------------------------------------------------------------------- +| 04 | 0x00 +---------------------------------------------------------------------------- +| 05 | data length +---------------------------------------------------------------------------- +| 06-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | USB CONTROLLER REGISTER WRITE REQUEST PACKET +============================================================================ +| 00 | 0xb1 register write command +---------------------------------------------------------------------------- +| 01-02 | register +---------------------------------------------------------------------------- +| 03 | 0x01 +---------------------------------------------------------------------------- +| 04 | value +---------------------------------------------------------------------------- +| 05-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | USB CONTROLLER REGISTER READ REQUEST PACKET +============================================================================ +| 00 | 0xb0 register read command +---------------------------------------------------------------------------- +| 01-02 | register +---------------------------------------------------------------------------- +| 03 | 0x01 +---------------------------------------------------------------------------- +| 04-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | LED CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x16 LED and IR control command +---------------------------------------------------------------------------- +| 01 | 0x01 (LED) +---------------------------------------------------------------------------- +| 03 | 0x00 blink +| | 0x01 lights continuously +---------------------------------------------------------------------------- +| 04 | blink interval +| | 0x00 fastest (looks like LED lights continuously) +| | 0xff slowest +---------------------------------------------------------------------------- +| 05-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | IR CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x16 LED and IR control command +---------------------------------------------------------------------------- +| 01 | 0x02 (IR) +---------------------------------------------------------------------------- +| 03 | 0x00 IR disabled +| | 0x01 IR enabled +---------------------------------------------------------------------------- +| 04-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | STREAMING CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x12 streaming control command +---------------------------------------------------------------------------- +| 01 | 0x00 streaming disabled +| | 0x01 streaming enabled +---------------------------------------------------------------------------- +| 02 | 0x00 +---------------------------------------------------------------------------- +| 03-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | REMOTE CONTROL REQUEST PACKET +============================================================================ +| 00 | 0x41 remote control command +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | REMOTE CONTROL REPLY PACKET +============================================================================ +| 00 | 0x00 code not received +| | 0x01 code received +---------------------------------------------------------------------------- +| 01 | remote control code +---------------------------------------------------------------------------- +| 02-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | GET HARDWARE INFO REQUEST PACKET +============================================================================ +| 00 | 0x19 get hardware info command +---------------------------------------------------------------------------- +| 01-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | GET HARDWARE INFO REPLY PACKET +============================================================================ +| 00 | hardware id +---------------------------------------------------------------------------- +| 01-02 | firmware version +---------------------------------------------------------------------------- +| 03-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +============================================================================ +| 00-63 | SMART CARD READER PACKET +============================================================================ +| 00 | 0x34 smart card reader command +---------------------------------------------------------------------------- +| xx | +---------------------------------------------------------------------------- +| xx-59 | don't care +---------------------------------------------------------------------------- +| 60 | packet sequence number +---------------------------------------------------------------------------- +| 61-63 | don't care +---------------------------------------------------------------------------- + +*/ |