Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 417 insertions, 0 deletions

diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb.h b/drivers/media/usb/dvb-usb-v2/dvb_usb.h
new file mode 100644
index 000000000..288c15a7d
--- /dev/null
+++ b/drivers/media/usb/dvb-usb-v2/dvb_usb.h
@@ -0,0 +1,417 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * DVB USB framework
+ *
+ * Copyright (C) 2004-6 Patrick Boettcher <patrick.boettcher@posteo.de>
+ * Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
+ */
+
+#ifndef DVB_USB_H
+#define DVB_USB_H
+
+#include <linux/usb/input.h>
+#include <linux/firmware.h>
+#include <media/rc-core.h>
+#include <media/media-device.h>
+
+#include <media/dvb_frontend.h>
+#include <media/dvb_demux.h>
+#include <media/dvb_net.h>
+#include <media/dmxdev.h>
+#include <media/dvb-usb-ids.h>
+
+/*
+ * device file: /dev/dvb/adapter[0-1]/frontend[0-2]
+ *
+ * |-- device
+ * |   |-- adapter0
+ * |   |   |-- frontend0
+ * |   |   |-- frontend1
+ * |   |   `-- frontend2
+ * |   `-- adapter1
+ * |       |-- frontend0
+ * |       |-- frontend1
+ * |       `-- frontend2
+ *
+ *
+ * Commonly used variable names:
+ * d = pointer to device (struct dvb_usb_device *)
+ * adap = pointer to adapter (struct dvb_usb_adapter *)
+ * fe = pointer to frontend (struct dvb_frontend *)
+ *
+ * Use macros defined in that file to resolve needed pointers.
+ */
+
+/* helper macros for every DVB USB driver use */
+#define adap_to_d(adap) (container_of(adap, struct dvb_usb_device, \
+		adapter[adap->id]))
+#define adap_to_priv(adap) (adap_to_d(adap)->priv)
+#define fe_to_adap(fe) ((struct dvb_usb_adapter *) ((fe)->dvb->priv))
+#define fe_to_d(fe) (adap_to_d(fe_to_adap(fe)))
+#define fe_to_priv(fe) (fe_to_d(fe)->priv)
+#define d_to_priv(d) (d->priv)
+
+#define dvb_usb_dbg_usb_control_msg(udev, r, t, v, i, b, l) { \
+	char *direction; \
+	if (t == (USB_TYPE_VENDOR | USB_DIR_OUT)) \
+		direction = ">>>"; \
+	else \
+		direction = "<<<"; \
+	dev_dbg(&udev->dev, "%s: %02x %02x %02x %02x %02x %02x %02x %02x " \
+			"%s %*ph\n",  __func__, t, r, v & 0xff, v >> 8, \
+			i & 0xff, i >> 8, l & 0xff, l >> 8, direction, l, b); \
+}
+
+#define DVB_USB_STREAM_BULK(endpoint_, count_, size_) { \
+	.type = USB_BULK, \
+	.count = count_, \
+	.endpoint = endpoint_, \
+	.u = { \
+		.bulk = { \
+			.buffersize = size_, \
+		} \
+	} \
+}
+
+#define DVB_USB_STREAM_ISOC(endpoint_, count_, frames_, size_, interval_) { \
+	.type = USB_ISOC, \
+	.count = count_, \
+	.endpoint = endpoint_, \
+	.u = { \
+		.isoc = { \
+			.framesperurb = frames_, \
+			.framesize = size_,\
+			.interval = interval_, \
+		} \
+	} \
+}
+
+#define DVB_USB_DEVICE(vend, prod, props_, name_, rc) \
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE, \
+	.idVendor = (vend), \
+	.idProduct = (prod), \
+	.driver_info = (kernel_ulong_t) &((const struct dvb_usb_driver_info) { \
+		.props = (props_), \
+		.name = (name_), \
+		.rc_map = (rc), \
+	})
+
+struct dvb_usb_device;
+struct dvb_usb_adapter;
+
+/**
+ * struct dvb_usb_driver_info - structure for carrying all needed data from the
+ *	device driver to the general
+ * dvb usb routines
+ * @name: device name
+ * @rc_map: name of rc codes table
+ * @props: structure containing all device properties
+ */
+struct dvb_usb_driver_info {
+	const char *name;
+	const char *rc_map;
+	const struct dvb_usb_device_properties *props;
+};
+
+/**
+ * struct dvb_usb_rc - structure for remote controller configuration
+ * @map_name: name of rc codes table
+ * @allowed_protos: protocol(s) supported by the driver
+ * @change_protocol: callback to change protocol
+ * @query: called to query an event from the device
+ * @interval: time in ms between two queries
+ * @driver_type: used to point if a device supports raw mode
+ * @bulk_mode: device supports bulk mode for rc (disable polling mode)
+ * @timeout: set to length of last space before raw IR goes idle
+ */
+struct dvb_usb_rc {
+	const char *map_name;
+	u64 allowed_protos;
+	int (*change_protocol)(struct rc_dev *dev, u64 *rc_proto);
+	int (*query) (struct dvb_usb_device *d);
+	unsigned int interval;
+	enum rc_driver_type driver_type;
+	bool bulk_mode;
+	int timeout;
+};
+
+/**
+ * struct usb_data_stream_properties - usb streaming configuration for adapter
+ * @type: urb type
+ * @count: count of used urbs
+ * @endpoint: stream usb endpoint number
+ * @u: union for @bulk and @isoc
+ */
+struct usb_data_stream_properties {
+#define USB_BULK  1
+#define USB_ISOC  2
+	u8 type;
+	u8 count;
+	u8 endpoint;
+
+	union {
+		struct {
+			unsigned int buffersize; /* per URB */
+		} bulk;
+		struct {
+			int framesperurb;
+			int framesize;
+			int interval;
+		} isoc;
+	} u;
+};
+
+/**
+ * struct dvb_usb_adapter_properties - properties of dvb usb device adapter
+ * @caps: adapter capabilities
+ * @pid_filter_count: pid count of adapter pid-filter
+ * @pid_filter_ctrl: called to enable/disable pid-filter
+ * @pid_filter: called to set/unset pid for filtering
+ * @stream: adapter usb stream configuration
+ */
+struct dvb_usb_adapter_properties {
+#define MAX_NO_OF_FE_PER_ADAP 3
+#define DVB_USB_ADAP_HAS_PID_FILTER               0x01
+#define DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF 0x02
+#define DVB_USB_ADAP_NEED_PID_FILTERING           0x04
+	u8 caps;
+
+	u8 pid_filter_count;
+	int (*pid_filter_ctrl) (struct dvb_usb_adapter *, int);
+	int (*pid_filter) (struct dvb_usb_adapter *, int, u16, int);
+
+	struct usb_data_stream_properties stream;
+};
+
+/**
+ * struct dvb_usb_device_properties - properties of a dvb-usb-device
+ * @driver_name: name of the owning driver module
+ * @owner: owner of the dvb_adapter
+ * @adapter_nr: values from the DVB_DEFINE_MOD_OPT_ADAPTER_NR() macro
+ * @bInterfaceNumber: usb interface number driver binds
+ * @size_of_priv: bytes allocated for the driver private data
+ * @generic_bulk_ctrl_endpoint: bulk control endpoint number for sent
+ * @generic_bulk_ctrl_endpoint_response: bulk control endpoint number for
+ *  receive
+ * @generic_bulk_ctrl_delay: delay between bulk control sent and receive message
+ * @probe: like probe on driver model
+ * @disconnect: like disconnect on driver model
+ * @identify_state: called to determine the firmware state (cold or warm) and
+ *  return possible firmware file name to be loaded
+ * @firmware: name of the firmware file to be loaded
+ * @download_firmware: called to download the firmware
+ * @i2c_algo: i2c_algorithm if the device has i2c-adapter
+ * @num_adapters: dvb usb device adapter count
+ * @get_adapter_count: called to resolve adapter count
+ * @adapter: array of all adapter properties of device
+ * @power_ctrl: called to enable/disable power of the device
+ * @read_config: called to resolve device configuration
+ * @read_mac_address: called to resolve adapter mac-address
+ * @frontend_attach: called to attach the possible frontends
+ * @frontend_detach: called to detach the possible frontends
+ * @tuner_attach: called to attach the possible tuners
+ * @tuner_detach: called to detach the possible tuners
+ * @frontend_ctrl: called to power on/off active frontend
+ * @streaming_ctrl: called to start/stop the usb streaming of adapter
+ * @init: called after adapters are created in order to finalize device
+ *  configuration
+ * @exit: called when driver is unloaded
+ * @get_rc_config: called to resolve used remote controller configuration
+ * @get_stream_config: called to resolve input and output stream configuration
+ *  of the adapter just before streaming is started. input stream is transport
+ *  stream from the demodulator and output stream is usb stream to host.
+ */
+struct dvb_usb_device_properties {
+#define MAX_NO_OF_ADAPTER_PER_DEVICE 2
+	const char *driver_name;
+	struct module *owner;
+	short *adapter_nr;
+
+	u8 bInterfaceNumber;
+	unsigned int size_of_priv;
+	u8 generic_bulk_ctrl_endpoint;
+	u8 generic_bulk_ctrl_endpoint_response;
+	unsigned int generic_bulk_ctrl_delay;
+
+	int (*probe)(struct dvb_usb_device *);
+	void (*disconnect)(struct dvb_usb_device *);
+#define WARM                  0
+#define COLD                  1
+	int (*identify_state) (struct dvb_usb_device *, const char **);
+	const char *firmware;
+#define RECONNECTS_USB        1
+	int (*download_firmware) (struct dvb_usb_device *,
+			const struct firmware *);
+
+	struct i2c_algorithm *i2c_algo;
+
+	unsigned int num_adapters;
+	int (*get_adapter_count) (struct dvb_usb_device *);
+	struct dvb_usb_adapter_properties adapter[MAX_NO_OF_ADAPTER_PER_DEVICE];
+	int (*power_ctrl) (struct dvb_usb_device *, int);
+	int (*read_config) (struct dvb_usb_device *d);
+	int (*read_mac_address) (struct dvb_usb_adapter *, u8 []);
+	int (*frontend_attach) (struct dvb_usb_adapter *);
+	int (*frontend_detach)(struct dvb_usb_adapter *);
+	int (*tuner_attach) (struct dvb_usb_adapter *);
+	int (*tuner_detach)(struct dvb_usb_adapter *);
+	int (*frontend_ctrl) (struct dvb_frontend *, int);
+	int (*streaming_ctrl) (struct dvb_frontend *, int);
+	int (*init) (struct dvb_usb_device *);
+	void (*exit) (struct dvb_usb_device *);
+	int (*get_rc_config) (struct dvb_usb_device *, struct dvb_usb_rc *);
+#define DVB_USB_FE_TS_TYPE_188        0
+#define DVB_USB_FE_TS_TYPE_204        1
+#define DVB_USB_FE_TS_TYPE_RAW        2
+	int (*get_stream_config) (struct dvb_frontend *,  u8 *,
+			struct usb_data_stream_properties *);
+};
+
+/**
+ * struct usb_data_stream - generic object of an usb stream
+ * @udev: USB device
+ * @props: properties
+ * @state: state of the data stream
+ * @complete: complete callback
+ * @urb_list: list of URBs
+ * @buf_num: number of buffer allocated
+ * @buf_size: size of each buffer in buf_list
+ * @buf_list: array containing all allocate buffers for streaming
+ * @dma_addr: list of dma_addr_t for each buffer in buf_list
+ *
+ * @urbs_initialized: number of URBs initialized
+ * @urbs_submitted: number of URBs submitted
+ * @user_priv: private pointer
+ */
+struct usb_data_stream {
+#define MAX_NO_URBS_FOR_DATA_STREAM 10
+	struct usb_device *udev;
+	struct usb_data_stream_properties props;
+
+#define USB_STATE_INIT    0x00
+#define USB_STATE_URB_BUF 0x01
+	u8 state;
+
+	void (*complete) (struct usb_data_stream *, u8 *, size_t);
+
+	struct urb    *urb_list[MAX_NO_URBS_FOR_DATA_STREAM];
+	int            buf_num;
+	unsigned long  buf_size;
+	u8            *buf_list[MAX_NO_URBS_FOR_DATA_STREAM];
+	dma_addr_t     dma_addr[MAX_NO_URBS_FOR_DATA_STREAM];
+
+	int urbs_initialized;
+	int urbs_submitted;
+
+	void *user_priv;
+};
+
+/**
+ * struct dvb_usb_adapter - dvb adapter object on dvb usb device
+ * @props: pointer to adapter properties
+ * @stream: adapter the usb data stream
+ * @id: index of this adapter (starting with 0)
+ * @ts_type: transport stream, input stream, type
+ * @suspend_resume_active: set when there is ongoing suspend / resume
+ * @pid_filtering: is hardware pid_filtering used or not
+ * @feed_count: current feed count
+ * @max_feed_count: maimum feed count device can handle
+ * @active_fe: active frontend
+ * @state_bits: status bits
+ * @dvb_adap: adapter dvb_adapter
+ * @dmxdev: adapter dmxdev
+ * @demux: adapter software demuxer
+ * @dvb_net: adapter dvb_net interfaces
+ * @fe: adapter frontends
+ * @fe_init: rerouted frontend-init function
+ * @fe_sleep: rerouted frontend-sleep function
+ */
+struct dvb_usb_adapter {
+	const struct dvb_usb_adapter_properties *props;
+	struct usb_data_stream stream;
+	u8 id;
+	u8 ts_type;
+	bool suspend_resume_active;
+	bool pid_filtering;
+	u8 feed_count;
+	u8 max_feed_count;
+	s8 active_fe;
+#define ADAP_INIT                0
+#define ADAP_SLEEP               1
+#define ADAP_STREAMING           2
+	unsigned long state_bits;
+
+	/* dvb */
+	struct dvb_adapter   dvb_adap;
+	struct dmxdev        dmxdev;
+	struct dvb_demux     demux;
+	struct dvb_net       dvb_net;
+
+	struct dvb_frontend *fe[MAX_NO_OF_FE_PER_ADAP];
+	int (*fe_init[MAX_NO_OF_FE_PER_ADAP]) (struct dvb_frontend *);
+	int (*fe_sleep[MAX_NO_OF_FE_PER_ADAP]) (struct dvb_frontend *);
+};
+
+/**
+ * struct dvb_usb_device - dvb usb device object
+ * @props: device properties
+ * @name: device name
+ * @rc_map: name of rc codes table
+ * @rc_polling_active: set when RC polling is active
+ * @intf: pointer to the device's struct usb_interface
+ * @udev: pointer to the device's struct usb_device
+ * @rc: remote controller configuration
+ * @powered: indicated whether the device is power or not
+ * @usb_mutex: mutex for usb control messages
+ * @i2c_mutex: mutex for i2c-transfers
+ * @i2c_adap: device's i2c-adapter
+ * @adapter: adapters
+ * @rc_dev: rc device for the remote control
+ * @rc_phys: rc path
+ * @rc_query_work: work for polling remote
+ * @priv: private data of the actual driver (allocate by dvb usb, size defined
+ *  in size_of_priv of dvb_usb_properties).
+ */
+struct dvb_usb_device {
+	const struct dvb_usb_device_properties *props;
+	const char *name;
+	const char *rc_map;
+	bool rc_polling_active;
+	struct usb_interface *intf;
+	struct usb_device *udev;
+	struct dvb_usb_rc rc;
+	int powered;
+
+	/* locking */
+	struct mutex usb_mutex;
+
+	/* i2c */
+	struct mutex i2c_mutex;
+	struct i2c_adapter i2c_adap;
+
+	struct dvb_usb_adapter adapter[MAX_NO_OF_ADAPTER_PER_DEVICE];
+
+	/* remote control */
+	struct rc_dev *rc_dev;
+	char rc_phys[64];
+	struct delayed_work rc_query_work;
+
+	void *priv;
+};
+
+extern int dvb_usbv2_probe(struct usb_interface *,
+		const struct usb_device_id *);
+extern void dvb_usbv2_disconnect(struct usb_interface *);
+extern int dvb_usbv2_suspend(struct usb_interface *, pm_message_t);
+extern int dvb_usbv2_resume(struct usb_interface *);
+extern int dvb_usbv2_reset_resume(struct usb_interface *);
+
+/* the generic read/write method for device control */
+extern int dvb_usbv2_generic_rw(struct dvb_usb_device *, u8 *, u16, u8 *, u16);
+extern int dvb_usbv2_generic_write(struct dvb_usb_device *, u8 *, u16);
+/* caller must hold lock when locked versions are called */
+extern int dvb_usbv2_generic_rw_locked(struct dvb_usb_device *,
+		u8 *, u16, u8 *, u16);
+extern int dvb_usbv2_generic_write_locked(struct dvb_usb_device *, u8 *, u16);
+
+#endif