Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 366 insertions, 0 deletions

diff --git a/drivers/media/usb/dvb-usb-v2/ec168.c b/drivers/media/usb/dvb-usb-v2/ec168.c
new file mode 100644
index 000000000..7ed0ab9e4
--- /dev/null
+++ b/drivers/media/usb/dvb-usb-v2/ec168.c
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * E3C EC168 DVB USB driver
+ *
+ * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
+ */
+
+#include "ec168.h"
+#include "ec100.h"
+#include "mxl5005s.h"
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+static int ec168_ctrl_msg(struct dvb_usb_device *d, struct ec168_req *req)
+{
+	int ret;
+	unsigned int pipe;
+	u8 request, requesttype;
+	u8 *buf;
+
+	switch (req->cmd) {
+	case DOWNLOAD_FIRMWARE:
+	case GPIO:
+	case WRITE_I2C:
+	case STREAMING_CTRL:
+		requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
+		request = req->cmd;
+		break;
+	case READ_I2C:
+		requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
+		request = req->cmd;
+		break;
+	case GET_CONFIG:
+		requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
+		request = CONFIG;
+		break;
+	case SET_CONFIG:
+		requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
+		request = CONFIG;
+		break;
+	case WRITE_DEMOD:
+		requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
+		request = DEMOD_RW;
+		break;
+	case READ_DEMOD:
+		requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
+		request = DEMOD_RW;
+		break;
+	default:
+		dev_err(&d->udev->dev, "%s: unknown command=%02x\n",
+				KBUILD_MODNAME, req->cmd);
+		ret = -EINVAL;
+		goto error;
+	}
+
+	buf = kmalloc(req->size, GFP_KERNEL);
+	if (!buf) {
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	if (requesttype == (USB_TYPE_VENDOR | USB_DIR_OUT)) {
+		/* write */
+		memcpy(buf, req->data, req->size);
+		pipe = usb_sndctrlpipe(d->udev, 0);
+	} else {
+		/* read */
+		pipe = usb_rcvctrlpipe(d->udev, 0);
+	}
+
+	msleep(1); /* avoid I2C errors */
+
+	ret = usb_control_msg(d->udev, pipe, request, requesttype, req->value,
+		req->index, buf, req->size, EC168_USB_TIMEOUT);
+
+	dvb_usb_dbg_usb_control_msg(d->udev, request, requesttype, req->value,
+			req->index, buf, req->size);
+
+	if (ret < 0)
+		goto err_dealloc;
+	else
+		ret = 0;
+
+	/* read request, copy returned data to return buf */
+	if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN))
+		memcpy(req->data, buf, req->size);
+
+	kfree(buf);
+	return ret;
+
+err_dealloc:
+	kfree(buf);
+error:
+	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+	return ret;
+}
+
+/* I2C */
+static struct ec100_config ec168_ec100_config;
+
+static int ec168_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+	int num)
+{
+	struct dvb_usb_device *d = i2c_get_adapdata(adap);
+	struct ec168_req req;
+	int i = 0;
+	int ret;
+
+	if (num > 2)
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+		return -EAGAIN;
+
+	while (i < num) {
+		if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
+			if (msg[i].addr == ec168_ec100_config.demod_address) {
+				req.cmd = READ_DEMOD;
+				req.value = 0;
+				req.index = 0xff00 + msg[i].buf[0]; /* reg */
+				req.size = msg[i+1].len; /* bytes to read */
+				req.data = &msg[i+1].buf[0];
+				ret = ec168_ctrl_msg(d, &req);
+				i += 2;
+			} else {
+				dev_err(&d->udev->dev, "%s: I2C read not " \
+						"implemented\n",
+						KBUILD_MODNAME);
+				ret = -EOPNOTSUPP;
+				i += 2;
+			}
+		} else {
+			if (msg[i].addr == ec168_ec100_config.demod_address) {
+				req.cmd = WRITE_DEMOD;
+				req.value = msg[i].buf[1]; /* val */
+				req.index = 0xff00 + msg[i].buf[0]; /* reg */
+				req.size = 0;
+				req.data = NULL;
+				ret = ec168_ctrl_msg(d, &req);
+				i += 1;
+			} else {
+				req.cmd = WRITE_I2C;
+				req.value = msg[i].buf[0]; /* val */
+				req.index = 0x0100 + msg[i].addr; /* I2C addr */
+				req.size = msg[i].len-1;
+				req.data = &msg[i].buf[1];
+				ret = ec168_ctrl_msg(d, &req);
+				i += 1;
+			}
+		}
+		if (ret)
+			goto error;
+
+	}
+	ret = i;
+
+error:
+	mutex_unlock(&d->i2c_mutex);
+	return ret;
+}
+
+static u32 ec168_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm ec168_i2c_algo = {
+	.master_xfer   = ec168_i2c_xfer,
+	.functionality = ec168_i2c_func,
+};
+
+/* Callbacks for DVB USB */
+static int ec168_identify_state(struct dvb_usb_device *d, const char **name)
+{
+	int ret;
+	u8 reply;
+	struct ec168_req req = {GET_CONFIG, 0, 1, sizeof(reply), &reply};
+	dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+	ret = ec168_ctrl_msg(d, &req);
+	if (ret)
+		goto error;
+
+	dev_dbg(&d->udev->dev, "%s: reply=%02x\n", __func__, reply);
+
+	if (reply == 0x01)
+		ret = WARM;
+	else
+		ret = COLD;
+
+	return ret;
+error:
+	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+	return ret;
+}
+
+static int ec168_download_firmware(struct dvb_usb_device *d,
+		const struct firmware *fw)
+{
+	int ret, len, remaining;
+	struct ec168_req req = {DOWNLOAD_FIRMWARE, 0, 0, 0, NULL};
+	dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+	#define LEN_MAX 2048 /* max packet size */
+	for (remaining = fw->size; remaining > 0; remaining -= LEN_MAX) {
+		len = remaining;
+		if (len > LEN_MAX)
+			len = LEN_MAX;
+
+		req.size = len;
+		req.data = (u8 *) &fw->data[fw->size - remaining];
+		req.index = fw->size - remaining;
+
+		ret = ec168_ctrl_msg(d, &req);
+		if (ret) {
+			dev_err(&d->udev->dev,
+					"%s: firmware download failed=%d\n",
+					KBUILD_MODNAME, ret);
+			goto error;
+		}
+	}
+
+	req.size = 0;
+
+	/* set "warm"? */
+	req.cmd = SET_CONFIG;
+	req.value = 0;
+	req.index = 0x0001;
+	ret = ec168_ctrl_msg(d, &req);
+	if (ret)
+		goto error;
+
+	/* really needed - no idea what does */
+	req.cmd = GPIO;
+	req.value = 0;
+	req.index = 0x0206;
+	ret = ec168_ctrl_msg(d, &req);
+	if (ret)
+		goto error;
+
+	/* activate tuner I2C? */
+	req.cmd = WRITE_I2C;
+	req.value = 0;
+	req.index = 0x00c6;
+	ret = ec168_ctrl_msg(d, &req);
+	if (ret)
+		goto error;
+
+	return ret;
+error:
+	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+	return ret;
+}
+
+static struct ec100_config ec168_ec100_config = {
+	.demod_address = 0xff, /* not real address, demod is integrated */
+};
+
+static int ec168_ec100_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dvb_usb_device *d = adap_to_d(adap);
+	dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+	adap->fe[0] = dvb_attach(ec100_attach, &ec168_ec100_config,
+			&d->i2c_adap);
+	if (adap->fe[0] == NULL)
+		return -ENODEV;
+
+	return 0;
+}
+
+static struct mxl5005s_config ec168_mxl5003s_config = {
+	.i2c_address     = 0xc6,
+	.if_freq         = IF_FREQ_4570000HZ,
+	.xtal_freq       = CRYSTAL_FREQ_16000000HZ,
+	.agc_mode        = MXL_SINGLE_AGC,
+	.tracking_filter = MXL_TF_OFF,
+	.rssi_enable     = MXL_RSSI_ENABLE,
+	.cap_select      = MXL_CAP_SEL_ENABLE,
+	.div_out         = MXL_DIV_OUT_4,
+	.clock_out       = MXL_CLOCK_OUT_DISABLE,
+	.output_load     = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
+	.top		 = MXL5005S_TOP_25P2,
+	.mod_mode        = MXL_DIGITAL_MODE,
+	.if_mode         = MXL_ZERO_IF,
+	.AgcMasterByte   = 0x00,
+};
+
+static int ec168_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dvb_usb_device *d = adap_to_d(adap);
+	dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+	return dvb_attach(mxl5005s_attach, adap->fe[0], &d->i2c_adap,
+			&ec168_mxl5003s_config) == NULL ? -ENODEV : 0;
+}
+
+static int ec168_streaming_ctrl(struct dvb_frontend *fe, int onoff)
+{
+	struct dvb_usb_device *d = fe_to_d(fe);
+	struct ec168_req req = {STREAMING_CTRL, 0x7f01, 0x0202, 0, NULL};
+	dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
+
+	if (onoff)
+		req.index = 0x0102;
+	return ec168_ctrl_msg(d, &req);
+}
+
+/* DVB USB Driver stuff */
+/* bInterfaceNumber 0 is HID
+ * bInterfaceNumber 1 is DVB-T */
+static const struct dvb_usb_device_properties ec168_props = {
+	.driver_name = KBUILD_MODNAME,
+	.owner = THIS_MODULE,
+	.adapter_nr = adapter_nr,
+	.bInterfaceNumber = 1,
+
+	.identify_state = ec168_identify_state,
+	.firmware = EC168_FIRMWARE,
+	.download_firmware = ec168_download_firmware,
+
+	.i2c_algo = &ec168_i2c_algo,
+	.frontend_attach = ec168_ec100_frontend_attach,
+	.tuner_attach = ec168_mxl5003s_tuner_attach,
+	.streaming_ctrl = ec168_streaming_ctrl,
+
+	.num_adapters = 1,
+	.adapter = {
+		{
+			.stream = DVB_USB_STREAM_BULK(0x82, 6, 32 * 512),
+		}
+	},
+};
+
+static const struct usb_device_id ec168_id[] = {
+	{ DVB_USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168,
+		     &ec168_props, "E3C EC168 reference design", NULL)},
+	{ DVB_USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_2,
+		     &ec168_props, "E3C EC168 reference design", NULL)},
+	{ DVB_USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_3,
+		     &ec168_props, "E3C EC168 reference design", NULL)},
+	{ DVB_USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_4,
+		     &ec168_props, "E3C EC168 reference design", NULL)},
+	{ DVB_USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_5,
+		     &ec168_props, "E3C EC168 reference design", NULL)},
+	{}
+};
+MODULE_DEVICE_TABLE(usb, ec168_id);
+
+static struct usb_driver ec168_driver = {
+	.name = KBUILD_MODNAME,
+	.id_table = ec168_id,
+	.probe = dvb_usbv2_probe,
+	.disconnect = dvb_usbv2_disconnect,
+	.suspend = dvb_usbv2_suspend,
+	.resume = dvb_usbv2_resume,
+	.no_dynamic_id = 1,
+	.soft_unbind = 1,
+};
+
+module_usb_driver(ec168_driver);
+
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_DESCRIPTION("E3C EC168 driver");
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(EC168_FIRMWARE);