Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 279 insertions, 0 deletions

diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.h b/drivers/media/usb/dvb-usb-v2/rtl28xxu.h
new file mode 100644
index 000000000..d5e207baa
--- /dev/null
+++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.h
@@ -0,0 +1,279 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Realtek RTL28xxU DVB USB driver
+ *
+ * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
+ * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
+ */
+
+#ifndef RTL28XXU_H
+#define RTL28XXU_H
+
+#include <linux/platform_device.h>
+
+#include "dvb_usb.h"
+
+#include "rtl2830.h"
+#include "rtl2832.h"
+#include "rtl2832_sdr.h"
+#include "mn88472.h"
+#include "mn88473.h"
+#include "cxd2841er.h"
+
+#include "qt1010.h"
+#include "mt2060.h"
+#include "mxl5005s.h"
+#include "fc0012.h"
+#include "fc0013.h"
+#include "e4000.h"
+#include "fc2580.h"
+#include "tua9001.h"
+#include "r820t.h"
+#include "si2168.h"
+#include "si2157.h"
+
+/*
+ * USB commands
+ * (usb_control_msg() index parameter)
+ */
+
+#define DEMOD            0x0000
+#define USB              0x0100
+#define SYS              0x0200
+#define I2C              0x0300
+#define I2C_DA           0x0600
+
+#define CMD_WR_FLAG      0x0010
+#define CMD_DEMOD_RD     0x0000
+#define CMD_DEMOD_WR     0x0010
+#define CMD_USB_RD       0x0100
+#define CMD_USB_WR       0x0110
+#define CMD_SYS_RD       0x0200
+#define CMD_IR_RD        0x0201
+#define CMD_IR_WR        0x0211
+#define CMD_SYS_WR       0x0210
+#define CMD_I2C_RD       0x0300
+#define CMD_I2C_WR       0x0310
+#define CMD_I2C_DA_RD    0x0600
+#define CMD_I2C_DA_WR    0x0610
+
+
+struct rtl28xxu_dev {
+	u8 buf[128];
+	u8 chip_id;
+	u8 tuner;
+	char *tuner_name;
+	u8 page; /* integrated demod active register page */
+	struct i2c_adapter *demod_i2c_adapter;
+	bool rc_active;
+	bool new_i2c_write;
+	struct i2c_client *i2c_client_demod;
+	struct i2c_client *i2c_client_tuner;
+	struct i2c_client *i2c_client_slave_demod;
+	struct platform_device *platform_device_sdr;
+	#define SLAVE_DEMOD_NONE           0
+	#define SLAVE_DEMOD_MN88472        1
+	#define SLAVE_DEMOD_MN88473        2
+	#define SLAVE_DEMOD_SI2168         3
+	#define SLAVE_DEMOD_CXD2837ER      4
+	unsigned int slave_demod:3;
+	union {
+		struct rtl2830_platform_data rtl2830_platform_data;
+		struct rtl2832_platform_data rtl2832_platform_data;
+	};
+};
+
+enum rtl28xxu_chip_id {
+	CHIP_ID_NONE,
+	CHIP_ID_RTL2831U,
+	CHIP_ID_RTL2832U,
+};
+
+/* XXX: Hack. This must be keep sync with rtl2832 demod driver. */
+enum rtl28xxu_tuner {
+	TUNER_NONE,
+
+	TUNER_RTL2830_QT1010          = 0x10,
+	TUNER_RTL2830_MT2060,
+	TUNER_RTL2830_MXL5005S,
+
+	TUNER_RTL2832_MT2266          = 0x20,
+	TUNER_RTL2832_FC2580,
+	TUNER_RTL2832_MT2063,
+	TUNER_RTL2832_MAX3543,
+	TUNER_RTL2832_TUA9001,
+	TUNER_RTL2832_MXL5007T,
+	TUNER_RTL2832_FC0012,
+	TUNER_RTL2832_E4000,
+	TUNER_RTL2832_TDA18272,
+	TUNER_RTL2832_FC0013,
+	TUNER_RTL2832_R820T,
+	TUNER_RTL2832_R828D,
+	TUNER_RTL2832_SI2157,
+};
+
+struct rtl28xxu_req {
+	u16 value;
+	u16 index;
+	u16 size;
+	u8 *data;
+};
+
+struct rtl28xxu_reg_val {
+	u16 reg;
+	u8 val;
+};
+
+struct rtl28xxu_reg_val_mask {
+	u16 reg;
+	u8 val;
+	u8 mask;
+};
+
+/*
+ * memory map
+ *
+ * 0x0000 DEMOD : demodulator
+ * 0x2000 USB   : SIE, USB endpoint, debug, DMA
+ * 0x3000 SYS   : system
+ * 0xfc00 RC    : remote controller (not RTL2831U)
+ */
+
+/*
+ * USB registers
+ */
+/* SIE Control Registers */
+#define USB_SYSCTL         0x2000 /* USB system control */
+#define USB_SYSCTL_0       0x2000 /* USB system control */
+#define USB_SYSCTL_1       0x2001 /* USB system control */
+#define USB_SYSCTL_2       0x2002 /* USB system control */
+#define USB_SYSCTL_3       0x2003 /* USB system control */
+#define USB_IRQSTAT        0x2008 /* SIE interrupt status */
+#define USB_IRQEN          0x200C /* SIE interrupt enable */
+#define USB_CTRL           0x2010 /* USB control */
+#define USB_STAT           0x2014 /* USB status */
+#define USB_DEVADDR        0x2018 /* USB device address */
+#define USB_TEST           0x201C /* USB test mode */
+#define USB_FRAME_NUMBER   0x2020 /* frame number */
+#define USB_FIFO_ADDR      0x2028 /* address of SIE FIFO RAM */
+#define USB_FIFO_CMD       0x202A /* SIE FIFO RAM access command */
+#define USB_FIFO_DATA      0x2030 /* SIE FIFO RAM data */
+/* Endpoint Registers */
+#define EP0_SETUPA         0x20F8 /* EP 0 setup packet lower byte */
+#define EP0_SETUPB         0x20FC /* EP 0 setup packet higher byte */
+#define USB_EP0_CFG        0x2104 /* EP 0 configure */
+#define USB_EP0_CTL        0x2108 /* EP 0 control */
+#define USB_EP0_STAT       0x210C /* EP 0 status */
+#define USB_EP0_IRQSTAT    0x2110 /* EP 0 interrupt status */
+#define USB_EP0_IRQEN      0x2114 /* EP 0 interrupt enable */
+#define USB_EP0_MAXPKT     0x2118 /* EP 0 max packet size */
+#define USB_EP0_BC         0x2120 /* EP 0 FIFO byte counter */
+#define USB_EPA_CFG        0x2144 /* EP A configure */
+#define USB_EPA_CFG_0      0x2144 /* EP A configure */
+#define USB_EPA_CFG_1      0x2145 /* EP A configure */
+#define USB_EPA_CFG_2      0x2146 /* EP A configure */
+#define USB_EPA_CFG_3      0x2147 /* EP A configure */
+#define USB_EPA_CTL        0x2148 /* EP A control */
+#define USB_EPA_CTL_0      0x2148 /* EP A control */
+#define USB_EPA_CTL_1      0x2149 /* EP A control */
+#define USB_EPA_CTL_2      0x214A /* EP A control */
+#define USB_EPA_CTL_3      0x214B /* EP A control */
+#define USB_EPA_STAT       0x214C /* EP A status */
+#define USB_EPA_IRQSTAT    0x2150 /* EP A interrupt status */
+#define USB_EPA_IRQEN      0x2154 /* EP A interrupt enable */
+#define USB_EPA_MAXPKT     0x2158 /* EP A max packet size */
+#define USB_EPA_MAXPKT_0   0x2158 /* EP A max packet size */
+#define USB_EPA_MAXPKT_1   0x2159 /* EP A max packet size */
+#define USB_EPA_MAXPKT_2   0x215A /* EP A max packet size */
+#define USB_EPA_MAXPKT_3   0x215B /* EP A max packet size */
+#define USB_EPA_FIFO_CFG   0x2160 /* EP A FIFO configure */
+#define USB_EPA_FIFO_CFG_0 0x2160 /* EP A FIFO configure */
+#define USB_EPA_FIFO_CFG_1 0x2161 /* EP A FIFO configure */
+#define USB_EPA_FIFO_CFG_2 0x2162 /* EP A FIFO configure */
+#define USB_EPA_FIFO_CFG_3 0x2163 /* EP A FIFO configure */
+/* Debug Registers */
+#define USB_PHYTSTDIS      0x2F04 /* PHY test disable */
+#define USB_TOUT_VAL       0x2F08 /* USB time-out time */
+#define USB_VDRCTRL        0x2F10 /* UTMI vendor signal control */
+#define USB_VSTAIN         0x2F14 /* UTMI vendor signal status in */
+#define USB_VLOADM         0x2F18 /* UTMI load vendor signal status in */
+#define USB_VSTAOUT        0x2F1C /* UTMI vendor signal status out */
+#define USB_UTMI_TST       0x2F80 /* UTMI test */
+#define USB_UTMI_STATUS    0x2F84 /* UTMI status */
+#define USB_TSTCTL         0x2F88 /* test control */
+#define USB_TSTCTL2        0x2F8C /* test control 2 */
+#define USB_PID_FORCE      0x2F90 /* force PID */
+#define USB_PKTERR_CNT     0x2F94 /* packet error counter */
+#define USB_RXERR_CNT      0x2F98 /* RX error counter */
+#define USB_MEM_BIST       0x2F9C /* MEM BIST test */
+#define USB_SLBBIST        0x2FA0 /* self-loop-back BIST */
+#define USB_CNTTEST        0x2FA4 /* counter test */
+#define USB_PHYTST         0x2FC0 /* USB PHY test */
+#define USB_DBGIDX         0x2FF0 /* select individual block debug signal */
+#define USB_DBGMUX         0x2FF4 /* debug signal module mux */
+
+/*
+ * SYS registers
+ */
+/* demod control registers */
+#define SYS_SYS0           0x3000 /* include DEMOD_CTL, GPO, GPI, GPOE */
+#define SYS_DEMOD_CTL      0x3000 /* control register for DVB-T demodulator */
+/* GPIO registers */
+#define SYS_GPIO_OUT_VAL   0x3001 /* output value of GPIO */
+#define SYS_GPIO_IN_VAL    0x3002 /* input value of GPIO */
+#define SYS_GPIO_OUT_EN    0x3003 /* output enable of GPIO */
+#define SYS_SYS1           0x3004 /* include GPD, SYSINTE, SYSINTS, GP_CFG0 */
+#define SYS_GPIO_DIR       0x3004 /* direction control for GPIO */
+#define SYS_SYSINTE        0x3005 /* system interrupt enable */
+#define SYS_SYSINTS        0x3006 /* system interrupt status */
+#define SYS_GPIO_CFG0      0x3007 /* PAD configuration for GPIO0-GPIO3 */
+#define SYS_SYS2           0x3008 /* include GP_CFG1 and 3 reserved bytes */
+#define SYS_GPIO_CFG1      0x3008 /* PAD configuration for GPIO4 */
+#define SYS_DEMOD_CTL1     0x300B
+
+/* IrDA registers */
+#define SYS_IRRC_PSR       0x3020 /* IR protocol selection */
+#define SYS_IRRC_PER       0x3024 /* IR protocol extension */
+#define SYS_IRRC_SF        0x3028 /* IR sampling frequency */
+#define SYS_IRRC_DPIR      0x302C /* IR data package interval */
+#define SYS_IRRC_CR        0x3030 /* IR control */
+#define SYS_IRRC_RP        0x3034 /* IR read port */
+#define SYS_IRRC_SR        0x3038 /* IR status */
+/* I2C master registers */
+#define SYS_I2CCR          0x3040 /* I2C clock */
+#define SYS_I2CMCR         0x3044 /* I2C master control */
+#define SYS_I2CMSTR        0x3048 /* I2C master SCL timing */
+#define SYS_I2CMSR         0x304C /* I2C master status */
+#define SYS_I2CMFR         0x3050 /* I2C master FIFO */
+
+/*
+ * IR registers
+ */
+#define IR_RX_BUF          0xFC00
+#define IR_RX_IE           0xFD00
+#define IR_RX_IF           0xFD01
+#define IR_RX_CTRL         0xFD02
+#define IR_RX_CFG          0xFD03
+#define IR_MAX_DURATION0   0xFD04
+#define IR_MAX_DURATION1   0xFD05
+#define IR_IDLE_LEN0       0xFD06
+#define IR_IDLE_LEN1       0xFD07
+#define IR_GLITCH_LEN      0xFD08
+#define IR_RX_BUF_CTRL     0xFD09
+#define IR_RX_BUF_DATA     0xFD0A
+#define IR_RX_BC           0xFD0B
+#define IR_RX_CLK          0xFD0C
+#define IR_RX_C_COUNT_L    0xFD0D
+#define IR_RX_C_COUNT_H    0xFD0E
+#define IR_SUSPEND_CTRL    0xFD10
+#define IR_ERR_TOL_CTRL    0xFD11
+#define IR_UNIT_LEN        0xFD12
+#define IR_ERR_TOL_LEN     0xFD13
+#define IR_MAX_H_TOL_LEN   0xFD14
+#define IR_MAX_L_TOL_LEN   0xFD15
+#define IR_MASK_CTRL       0xFD16
+#define IR_MASK_DATA       0xFD17
+#define IR_RES_MASK_ADDR   0xFD18
+#define IR_RES_MASK_T_LEN  0xFD19
+
+#endif