Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 204 insertions, 0 deletions

diff --git a/drivers/media/usb/dvb-usb/cxusb.h b/drivers/media/usb/dvb-usb/cxusb.h
new file mode 100644
index 000000000..9e374e531
--- /dev/null
+++ b/drivers/media/usb/dvb-usb/cxusb.h
@@ -0,0 +1,204 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _DVB_USB_CXUSB_H_
+#define _DVB_USB_CXUSB_H_
+
+#include <linux/completion.h>
+#include <linux/i2c.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/usb.h>
+#include <linux/workqueue.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-device.h>
+#include <media/videobuf2-core.h>
+#include <media/videobuf2-v4l2.h>
+
+#define DVB_USB_LOG_PREFIX "cxusb"
+#include "dvb-usb.h"
+
+#define CXUSB_VIDEO_URBS (5)
+#define CXUSB_VIDEO_URB_MAX_SIZE (512 * 1024)
+
+#define CXUSB_VIDEO_PKT_SIZE 3030
+#define CXUSB_VIDEO_MAX_FRAME_PKTS 346
+#define CXUSB_VIDEO_MAX_FRAME_SIZE (CXUSB_VIDEO_MAX_FRAME_PKTS * \
+					CXUSB_VIDEO_PKT_SIZE)
+
+/* usb commands - some of it are guesses, don't have a reference yet */
+#define CMD_BLUEBIRD_GPIO_RW 0x05
+
+#define CMD_I2C_WRITE     0x08
+#define CMD_I2C_READ      0x09
+
+#define CMD_GPIO_READ     0x0d
+#define CMD_GPIO_WRITE    0x0e
+#define     GPIO_TUNER         0x02
+
+#define CMD_POWER_OFF     0xdc
+#define CMD_POWER_ON      0xde
+
+#define CMD_STREAMING_ON  0x36
+#define CMD_STREAMING_OFF 0x37
+
+#define CMD_AVER_STREAM_ON  0x18
+#define CMD_AVER_STREAM_OFF 0x19
+
+#define CMD_GET_IR_CODE   0x47
+
+#define CMD_ANALOG        0x50
+#define CMD_DIGITAL       0x51
+
+#define CXUSB_BT656_PREAMBLE ((const u8 *)"\xff\x00\x00")
+
+#define CXUSB_BT656_FIELD_MASK BIT(6)
+#define CXUSB_BT656_FIELD_1 0
+#define CXUSB_BT656_FIELD_2 BIT(6)
+
+#define CXUSB_BT656_VBI_MASK BIT(5)
+#define CXUSB_BT656_VBI_ON BIT(5)
+#define CXUSB_BT656_VBI_OFF 0
+
+#define CXUSB_BT656_SEAV_MASK BIT(4)
+#define CXUSB_BT656_SEAV_EAV BIT(4)
+#define CXUSB_BT656_SEAV_SAV 0
+
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE  80
+
+struct cxusb_state {
+	u8 gpio_write_state[3];
+	bool gpio_write_refresh[3];
+	struct i2c_client *i2c_client_demod;
+	struct i2c_client *i2c_client_tuner;
+
+	unsigned char data[MAX_XFER_SIZE];
+
+	struct mutex stream_mutex;
+	u8 last_lock;
+	int (*fe_read_status)(struct dvb_frontend *fe,
+			      enum fe_status *status);
+};
+
+enum cxusb_open_type {
+	CXUSB_OPEN_INIT,
+	CXUSB_OPEN_NONE,
+	CXUSB_OPEN_ANALOG,
+	CXUSB_OPEN_DIGITAL
+};
+
+struct cxusb_medion_auxbuf {
+	u8 *buf;
+	unsigned int len;
+	unsigned int paylen;
+};
+
+enum cxusb_bt656_mode {
+	NEW_FRAME, FIRST_FIELD, SECOND_FIELD
+};
+
+enum cxusb_bt656_fmode {
+	START_SEARCH, LINE_SAMPLES, VBI_SAMPLES
+};
+
+struct cxusb_bt656_params {
+	enum cxusb_bt656_mode mode;
+	enum cxusb_bt656_fmode fmode;
+	unsigned int pos;
+	unsigned int line;
+	unsigned int linesamples;
+	u8 *buf;
+};
+
+struct cxusb_medion_dev {
+	/* has to be the first one */
+	struct cxusb_state state;
+
+	struct dvb_usb_device *dvbdev;
+
+	enum cxusb_open_type open_type;
+	unsigned int open_ctr;
+	struct mutex open_lock;
+
+#ifdef CONFIG_DVB_USB_CXUSB_ANALOG
+	struct v4l2_device v4l2dev;
+	struct v4l2_subdev *cx25840;
+	struct v4l2_subdev *tuner;
+	struct v4l2_subdev *tda9887;
+	struct video_device *videodev, *radiodev;
+	struct mutex dev_lock;
+
+	struct vb2_queue videoqueue;
+	u32 input;
+	bool stop_streaming;
+	u32 width, height;
+	u32 field_order;
+	struct cxusb_medion_auxbuf auxbuf;
+	v4l2_std_id norm;
+
+	struct urb *streamurbs[CXUSB_VIDEO_URBS];
+	unsigned long urbcomplete;
+	struct work_struct urbwork;
+	unsigned int nexturb;
+
+	struct cxusb_bt656_params bt656;
+	struct cxusb_medion_vbuffer *vbuf;
+	__u32 vbuf_sequence;
+
+	struct list_head buflist;
+
+	struct completion v4l2_release;
+#endif
+};
+
+struct cxusb_medion_vbuffer {
+	struct vb2_v4l2_buffer vb2;
+	struct list_head list;
+};
+
+/* defines for "debug" module parameter */
+#define CXUSB_DBG_RC BIT(0)
+#define CXUSB_DBG_I2C BIT(1)
+#define CXUSB_DBG_MISC BIT(2)
+#define CXUSB_DBG_BT656 BIT(3)
+#define CXUSB_DBG_URB BIT(4)
+#define CXUSB_DBG_OPS BIT(5)
+#define CXUSB_DBG_AUXB BIT(6)
+
+extern int dvb_usb_cxusb_debug;
+
+#define cxusb_vprintk(dvbdev, lvl, ...) do {				\
+		struct cxusb_medion_dev *_cxdev = (dvbdev)->priv;	\
+		if (dvb_usb_cxusb_debug & CXUSB_DBG_##lvl)		\
+			v4l2_printk(KERN_DEBUG,			\
+				    &_cxdev->v4l2dev, __VA_ARGS__);	\
+	} while (0)
+
+int cxusb_ctrl_msg(struct dvb_usb_device *d,
+		   u8 cmd, const u8 *wbuf, int wlen, u8 *rbuf, int rlen);
+
+#ifdef CONFIG_DVB_USB_CXUSB_ANALOG
+int cxusb_medion_analog_init(struct dvb_usb_device *dvbdev);
+int cxusb_medion_register_analog(struct dvb_usb_device *dvbdev);
+void cxusb_medion_unregister_analog(struct dvb_usb_device *dvbdev);
+#else
+static inline int cxusb_medion_analog_init(struct dvb_usb_device *dvbdev)
+{
+	return -EINVAL;
+}
+
+static inline int cxusb_medion_register_analog(struct dvb_usb_device *dvbdev)
+{
+	return 0;
+}
+
+static inline void cxusb_medion_unregister_analog(struct dvb_usb_device *dvbdev)
+{
+}
+#endif
+
+int cxusb_medion_get(struct dvb_usb_device *dvbdev,
+		     enum cxusb_open_type open_type);
+void cxusb_medion_put(struct dvb_usb_device *dvbdev);
+
+#endif