Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 166 insertions, 0 deletions

diff --git a/drivers/media/usb/dvb-usb/dibusb-mc-common.c b/drivers/media/usb/dvb-usb/dibusb-mc-common.c
new file mode 100644
index 000000000..b8cde4cde
--- /dev/null
+++ b/drivers/media/usb/dvb-usb/dibusb-mc-common.c
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Common methods for dibusb-based-receivers.
+ *
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
+ *
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
+ */
+
+#include "dibusb.h"
+
+MODULE_LICENSE("GPL");
+
+/* 3000MC/P stuff */
+// Config Adjacent channels  Perf -cal22
+static struct dibx000_agc_config dib3000p_mt2060_agc_config = {
+	.band_caps = BAND_VHF | BAND_UHF,
+	.setup     = (1 << 8) | (5 << 5) | (1 << 4) | (1 << 3) | (0 << 2) | (2 << 0),
+
+	.agc1_max = 48497,
+	.agc1_min = 23593,
+	.agc2_max = 46531,
+	.agc2_min = 24904,
+
+	.agc1_pt1 = 0x65,
+	.agc1_pt2 = 0x69,
+
+	.agc1_slope1 = 0x51,
+	.agc1_slope2 = 0x27,
+
+	.agc2_pt1 = 0,
+	.agc2_pt2 = 0x33,
+
+	.agc2_slope1 = 0x35,
+	.agc2_slope2 = 0x37,
+};
+
+static struct dib3000mc_config stk3000p_dib3000p_config = {
+	&dib3000p_mt2060_agc_config,
+
+	.max_time     = 0x196,
+	.ln_adc_level = 0x1cc7,
+
+	.output_mpeg2_in_188_bytes = 1,
+
+	.agc_command1 = 1,
+	.agc_command2 = 1,
+};
+
+static struct dibx000_agc_config dib3000p_panasonic_agc_config = {
+	.band_caps = BAND_VHF | BAND_UHF,
+	.setup     = (1 << 8) | (5 << 5) | (1 << 4) | (1 << 3) | (0 << 2) | (2 << 0),
+
+	.agc1_max = 56361,
+	.agc1_min = 22282,
+	.agc2_max = 47841,
+	.agc2_min = 36045,
+
+	.agc1_pt1 = 0x3b,
+	.agc1_pt2 = 0x6b,
+
+	.agc1_slope1 = 0x55,
+	.agc1_slope2 = 0x1d,
+
+	.agc2_pt1 = 0,
+	.agc2_pt2 = 0x0a,
+
+	.agc2_slope1 = 0x95,
+	.agc2_slope2 = 0x1e,
+};
+
+static struct dib3000mc_config mod3000p_dib3000p_config = {
+	&dib3000p_panasonic_agc_config,
+
+	.max_time     = 0x51,
+	.ln_adc_level = 0x1cc7,
+
+	.output_mpeg2_in_188_bytes = 1,
+
+	.agc_command1 = 1,
+	.agc_command2 = 1,
+};
+
+int dibusb_dib3000mc_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	if (le16_to_cpu(adap->dev->udev->descriptor.idVendor) == USB_VID_LITEON &&
+	    le16_to_cpu(adap->dev->udev->descriptor.idProduct) ==
+			USB_PID_LITEON_DVB_T_WARM) {
+		msleep(1000);
+	}
+
+	adap->fe_adap[0].fe = dvb_attach(dib3000mc_attach,
+					 &adap->dev->i2c_adap,
+					 DEFAULT_DIB3000P_I2C_ADDRESS,
+					 &mod3000p_dib3000p_config);
+	if ((adap->fe_adap[0].fe) == NULL)
+		adap->fe_adap[0].fe = dvb_attach(dib3000mc_attach,
+						 &adap->dev->i2c_adap,
+						 DEFAULT_DIB3000MC_I2C_ADDRESS,
+						 &mod3000p_dib3000p_config);
+	if ((adap->fe_adap[0].fe) != NULL) {
+		if (adap->priv != NULL) {
+			struct dibusb_state *st = adap->priv;
+			st->ops.pid_parse = dib3000mc_pid_parse;
+			st->ops.pid_ctrl  = dib3000mc_pid_control;
+		}
+		return 0;
+	}
+	return -ENODEV;
+}
+EXPORT_SYMBOL(dibusb_dib3000mc_frontend_attach);
+
+static struct mt2060_config stk3000p_mt2060_config = {
+	0x60
+};
+
+int dibusb_dib3000mc_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dibusb_state *st = adap->priv;
+	u8 a,b;
+	u16 if1 = 1220;
+	struct i2c_adapter *tun_i2c;
+
+	// First IF calibration for Liteon Sticks
+	if (le16_to_cpu(adap->dev->udev->descriptor.idVendor) == USB_VID_LITEON &&
+	    le16_to_cpu(adap->dev->udev->descriptor.idProduct) == USB_PID_LITEON_DVB_T_WARM) {
+
+		dibusb_read_eeprom_byte(adap->dev,0x7E,&a);
+		dibusb_read_eeprom_byte(adap->dev,0x7F,&b);
+
+		if (a == 0x00)
+			if1 += b;
+		else if (a == 0x80)
+			if1 -= b;
+		else
+			warn("LITE-ON DVB-T: Strange IF1 calibration :%2X %2X\n", a, b);
+
+	} else if (le16_to_cpu(adap->dev->udev->descriptor.idVendor) == USB_VID_DIBCOM &&
+		   le16_to_cpu(adap->dev->udev->descriptor.idProduct) == USB_PID_DIBCOM_MOD3001_WARM) {
+		u8 desc;
+		dibusb_read_eeprom_byte(adap->dev, 7, &desc);
+		if (desc == 2) {
+			a = 127;
+			do {
+				dibusb_read_eeprom_byte(adap->dev, a, &desc);
+				a--;
+			} while (a > 7 && (desc == 0xff || desc == 0x00));
+			if (desc & 0x80)
+				if1 -= (0xff - desc);
+			else
+				if1 += desc;
+		}
+	}
+
+	tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe_adap[0].fe, 1);
+	if (dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c, &stk3000p_mt2060_config, if1) == NULL) {
+		/* not found - use panasonic pll parameters */
+		if (dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60, tun_i2c, DVB_PLL_ENV57H1XD5) == NULL)
+			return -ENOMEM;
+	} else {
+		st->mt2060_present = 1;
+		/* set the correct parameters for the dib3000p */
+		dib3000mc_set_config(adap->fe_adap[0].fe, &stk3000p_dib3000p_config);
+	}
+	return 0;
+}
+EXPORT_SYMBOL(dibusb_dib3000mc_tuner_attach);