Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 257 insertions, 0 deletions

diff --git a/drivers/media/usb/dvb-usb/dtt200u-fe.c b/drivers/media/usb/dvb-usb/dtt200u-fe.c
new file mode 100644
index 000000000..9f83560ba
--- /dev/null
+++ b/drivers/media/usb/dvb-usb/dtt200u-fe.c
@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Frontend part of the Linux driver for the WideView/ Yakumo/ Hama/
+ * Typhoon/ Yuan DVB-T USB2.0 receiver.
+ *
+ * Copyright (C) 2005 Patrick Boettcher <patrick.boettcher@posteo.de>
+ *
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
+ */
+#include "dtt200u.h"
+
+struct dtt200u_fe_state {
+	struct dvb_usb_device *d;
+
+	enum fe_status stat;
+
+	struct dtv_frontend_properties fep;
+	struct dvb_frontend frontend;
+
+	unsigned char data[80];
+	struct mutex data_mutex;
+};
+
+static int dtt200u_fe_read_status(struct dvb_frontend *fe,
+				  enum fe_status *stat)
+{
+	struct dtt200u_fe_state *state = fe->demodulator_priv;
+	int ret;
+
+	mutex_lock(&state->data_mutex);
+	state->data[0] = GET_TUNE_STATUS;
+
+	ret = dvb_usb_generic_rw(state->d, state->data, 1, state->data, 3, 0);
+	if (ret < 0) {
+		*stat = 0;
+		mutex_unlock(&state->data_mutex);
+		return ret;
+	}
+
+	switch (state->data[0]) {
+		case 0x01:
+			*stat = FE_HAS_SIGNAL | FE_HAS_CARRIER |
+				FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
+			break;
+		case 0x00: /* pending */
+			*stat = FE_TIMEDOUT; /* during set_frontend */
+			break;
+		default:
+		case 0x02: /* failed */
+			*stat = 0;
+			break;
+	}
+	mutex_unlock(&state->data_mutex);
+	return 0;
+}
+
+static int dtt200u_fe_read_ber(struct dvb_frontend* fe, u32 *ber)
+{
+	struct dtt200u_fe_state *state = fe->demodulator_priv;
+	int ret;
+
+	mutex_lock(&state->data_mutex);
+	state->data[0] = GET_VIT_ERR_CNT;
+
+	ret = dvb_usb_generic_rw(state->d, state->data, 1, state->data, 3, 0);
+	if (ret >= 0)
+		*ber = (state->data[0] << 16) | (state->data[1] << 8) | state->data[2];
+
+	mutex_unlock(&state->data_mutex);
+	return ret;
+}
+
+static int dtt200u_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc)
+{
+	struct dtt200u_fe_state *state = fe->demodulator_priv;
+	int ret;
+
+	mutex_lock(&state->data_mutex);
+	state->data[0] = GET_RS_UNCOR_BLK_CNT;
+
+	ret = dvb_usb_generic_rw(state->d, state->data, 1, state->data, 2, 0);
+	if (ret >= 0)
+		*unc = (state->data[0] << 8) | state->data[1];
+
+	mutex_unlock(&state->data_mutex);
+	return ret;
+}
+
+static int dtt200u_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength)
+{
+	struct dtt200u_fe_state *state = fe->demodulator_priv;
+	int ret;
+
+	mutex_lock(&state->data_mutex);
+	state->data[0] = GET_AGC;
+
+	ret = dvb_usb_generic_rw(state->d, state->data, 1, state->data, 1, 0);
+	if (ret >= 0)
+		*strength = (state->data[0] << 8) | state->data[0];
+
+	mutex_unlock(&state->data_mutex);
+	return ret;
+}
+
+static int dtt200u_fe_read_snr(struct dvb_frontend* fe, u16 *snr)
+{
+	struct dtt200u_fe_state *state = fe->demodulator_priv;
+	int ret;
+
+	mutex_lock(&state->data_mutex);
+	state->data[0] = GET_SNR;
+
+	ret = dvb_usb_generic_rw(state->d, state->data, 1, state->data, 1, 0);
+	if (ret >= 0)
+		*snr = ~((state->data[0] << 8) | state->data[0]);
+
+	mutex_unlock(&state->data_mutex);
+	return ret;
+}
+
+static int dtt200u_fe_init(struct dvb_frontend* fe)
+{
+	struct dtt200u_fe_state *state = fe->demodulator_priv;
+	int ret;
+
+	mutex_lock(&state->data_mutex);
+	state->data[0] = SET_INIT;
+
+	ret = dvb_usb_generic_write(state->d, state->data, 1);
+	mutex_unlock(&state->data_mutex);
+
+	return ret;
+}
+
+static int dtt200u_fe_sleep(struct dvb_frontend* fe)
+{
+	return dtt200u_fe_init(fe);
+}
+
+static int dtt200u_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune)
+{
+	tune->min_delay_ms = 1500;
+	tune->step_size = 0;
+	tune->max_drift = 0;
+	return 0;
+}
+
+static int dtt200u_fe_set_frontend(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *fep = &fe->dtv_property_cache;
+	struct dtt200u_fe_state *state = fe->demodulator_priv;
+	int ret;
+	u16 freq = fep->frequency / 250000;
+
+	mutex_lock(&state->data_mutex);
+	state->data[0] = SET_BANDWIDTH;
+	switch (fep->bandwidth_hz) {
+	case 8000000:
+		state->data[1] = 8;
+		break;
+	case 7000000:
+		state->data[1] = 7;
+		break;
+	case 6000000:
+		state->data[1] = 6;
+		break;
+	default:
+		ret = -EINVAL;
+		goto ret;
+	}
+
+	ret = dvb_usb_generic_write(state->d, state->data, 2);
+	if (ret < 0)
+		goto ret;
+
+	state->data[0] = SET_RF_FREQ;
+	state->data[1] = freq & 0xff;
+	state->data[2] = (freq >> 8) & 0xff;
+	ret = dvb_usb_generic_write(state->d, state->data, 3);
+	if (ret < 0)
+		goto ret;
+
+ret:
+	mutex_unlock(&state->data_mutex);
+	return ret;
+}
+
+static int dtt200u_fe_get_frontend(struct dvb_frontend* fe,
+				   struct dtv_frontend_properties *fep)
+{
+	struct dtt200u_fe_state *state = fe->demodulator_priv;
+
+	memcpy(fep, &state->fep, sizeof(struct dtv_frontend_properties));
+	return 0;
+}
+
+static void dtt200u_fe_release(struct dvb_frontend* fe)
+{
+	struct dtt200u_fe_state *state = (struct dtt200u_fe_state*) fe->demodulator_priv;
+	kfree(state);
+}
+
+static const struct dvb_frontend_ops dtt200u_fe_ops;
+
+struct dvb_frontend* dtt200u_fe_attach(struct dvb_usb_device *d)
+{
+	struct dtt200u_fe_state* state = NULL;
+
+	/* allocate memory for the internal state */
+	state = kzalloc(sizeof(struct dtt200u_fe_state), GFP_KERNEL);
+	if (state == NULL)
+		goto error;
+
+	deb_info("attaching frontend dtt200u\n");
+
+	state->d = d;
+	mutex_init(&state->data_mutex);
+
+	memcpy(&state->frontend.ops,&dtt200u_fe_ops,sizeof(struct dvb_frontend_ops));
+	state->frontend.demodulator_priv = state;
+
+	return &state->frontend;
+error:
+	return NULL;
+}
+
+static const struct dvb_frontend_ops dtt200u_fe_ops = {
+	.delsys = { SYS_DVBT },
+	.info = {
+		.name			= "WideView USB DVB-T",
+		.frequency_min_hz	=  44250 * kHz,
+		.frequency_max_hz	= 867250 * kHz,
+		.frequency_stepsize_hz	=    250 * kHz,
+		.caps = FE_CAN_INVERSION_AUTO |
+				FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+				FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+				FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+				FE_CAN_TRANSMISSION_MODE_AUTO |
+				FE_CAN_GUARD_INTERVAL_AUTO |
+				FE_CAN_RECOVER |
+				FE_CAN_HIERARCHY_AUTO,
+	},
+
+	.release = dtt200u_fe_release,
+
+	.init = dtt200u_fe_init,
+	.sleep = dtt200u_fe_sleep,
+
+	.set_frontend = dtt200u_fe_set_frontend,
+	.get_frontend = dtt200u_fe_get_frontend,
+	.get_tune_settings = dtt200u_fe_get_tune_settings,
+
+	.read_status = dtt200u_fe_read_status,
+	.read_ber = dtt200u_fe_read_ber,
+	.read_signal_strength = dtt200u_fe_read_signal_strength,
+	.read_snr = dtt200u_fe_read_snr,
+	.read_ucblocks = dtt200u_fe_read_unc_blocks,
+};