Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 397 insertions, 0 deletions

diff --git a/drivers/media/usb/dvb-usb/dvb-usb-remote.c b/drivers/media/usb/dvb-usb/dvb-usb-remote.c
new file mode 100644
index 000000000..65e2c9e2c
--- /dev/null
+++ b/drivers/media/usb/dvb-usb/dvb-usb-remote.c
@@ -0,0 +1,397 @@
+// SPDX-License-Identifier: GPL-2.0
+/* dvb-usb-remote.c is part of the DVB USB library.
+ *
+ * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@posteo.de)
+ * see dvb-usb-init.c for copyright information.
+ *
+ * This file contains functions for initializing the input-device and for handling remote-control-queries.
+ */
+#include "dvb-usb-common.h"
+#include <linux/usb/input.h>
+
+static unsigned int
+legacy_dvb_usb_get_keymap_index(const struct input_keymap_entry *ke,
+				struct rc_map_table *keymap,
+				unsigned int keymap_size)
+{
+	unsigned int index;
+	unsigned int scancode;
+
+	if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
+		index = ke->index;
+	} else {
+		if (input_scancode_to_scalar(ke, &scancode))
+			return keymap_size;
+
+		/* See if we can match the raw key code. */
+		for (index = 0; index < keymap_size; index++)
+			if (keymap[index].scancode == scancode)
+				break;
+
+		/* See if there is an unused hole in the map */
+		if (index >= keymap_size) {
+			for (index = 0; index < keymap_size; index++) {
+				if (keymap[index].keycode == KEY_RESERVED ||
+				    keymap[index].keycode == KEY_UNKNOWN) {
+					break;
+				}
+			}
+		}
+	}
+
+	return index;
+}
+
+static int legacy_dvb_usb_getkeycode(struct input_dev *dev,
+				     struct input_keymap_entry *ke)
+{
+	struct dvb_usb_device *d = input_get_drvdata(dev);
+	struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
+	unsigned int keymap_size = d->props.rc.legacy.rc_map_size;
+	unsigned int index;
+
+	index = legacy_dvb_usb_get_keymap_index(ke, keymap, keymap_size);
+	if (index >= keymap_size)
+		return -EINVAL;
+
+	ke->keycode = keymap[index].keycode;
+	if (ke->keycode == KEY_UNKNOWN)
+		ke->keycode = KEY_RESERVED;
+	ke->len = sizeof(keymap[index].scancode);
+	memcpy(&ke->scancode, &keymap[index].scancode, ke->len);
+	ke->index = index;
+
+	return 0;
+}
+
+static int legacy_dvb_usb_setkeycode(struct input_dev *dev,
+				     const struct input_keymap_entry *ke,
+				     unsigned int *old_keycode)
+{
+	struct dvb_usb_device *d = input_get_drvdata(dev);
+	struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
+	unsigned int keymap_size = d->props.rc.legacy.rc_map_size;
+	unsigned int index;
+
+	index = legacy_dvb_usb_get_keymap_index(ke, keymap, keymap_size);
+	/*
+	 * FIXME: Currently, it is not possible to increase the size of
+	 * scancode table. For it to happen, one possibility
+	 * would be to allocate a table with key_map_size + 1,
+	 * copying data, appending the new key on it, and freeing
+	 * the old one - or maybe just allocating some spare space
+	 */
+	if (index >= keymap_size)
+		return -EINVAL;
+
+	*old_keycode = keymap[index].keycode;
+	keymap->keycode = ke->keycode;
+	__set_bit(ke->keycode, dev->keybit);
+
+	if (*old_keycode != KEY_RESERVED) {
+		__clear_bit(*old_keycode, dev->keybit);
+		for (index = 0; index < keymap_size; index++) {
+			if (keymap[index].keycode == *old_keycode) {
+				__set_bit(*old_keycode, dev->keybit);
+				break;
+			}
+		}
+	}
+
+	return 0;
+}
+
+/* Remote-control poll function - called every dib->rc_query_interval ms to see
+ * whether the remote control has received anything.
+ *
+ * TODO: Fix the repeat rate of the input device.
+ */
+static void legacy_dvb_usb_read_remote_control(struct work_struct *work)
+{
+	struct dvb_usb_device *d =
+		container_of(work, struct dvb_usb_device, rc_query_work.work);
+	u32 event;
+	int state;
+
+	/* TODO: need a lock here.  We can simply skip checking for the remote control
+	   if we're busy. */
+
+	/* when the parameter has been set to 1 via sysfs while the driver was running */
+	if (dvb_usb_disable_rc_polling)
+		return;
+
+	if (d->props.rc.legacy.rc_query(d,&event,&state)) {
+		err("error while querying for an remote control event.");
+		goto schedule;
+	}
+
+
+	switch (state) {
+		case REMOTE_NO_KEY_PRESSED:
+			break;
+		case REMOTE_KEY_PRESSED:
+			deb_rc("key pressed\n");
+			d->last_event = event;
+			input_event(d->input_dev, EV_KEY, event, 1);
+			input_sync(d->input_dev);
+			input_event(d->input_dev, EV_KEY, d->last_event, 0);
+			input_sync(d->input_dev);
+			break;
+		case REMOTE_KEY_REPEAT:
+			deb_rc("key repeated\n");
+			input_event(d->input_dev, EV_KEY, event, 1);
+			input_sync(d->input_dev);
+			input_event(d->input_dev, EV_KEY, d->last_event, 0);
+			input_sync(d->input_dev);
+			break;
+		default:
+			break;
+	}
+
+/* improved repeat handling ???
+	switch (state) {
+		case REMOTE_NO_KEY_PRESSED:
+			deb_rc("NO KEY PRESSED\n");
+			if (d->last_state != REMOTE_NO_KEY_PRESSED) {
+				deb_rc("releasing event %d\n",d->last_event);
+				input_event(d->rc_input_dev, EV_KEY, d->last_event, 0);
+				input_sync(d->rc_input_dev);
+			}
+			d->last_state = REMOTE_NO_KEY_PRESSED;
+			d->last_event = 0;
+			break;
+		case REMOTE_KEY_PRESSED:
+			deb_rc("KEY PRESSED\n");
+			deb_rc("pressing event %d\n",event);
+
+			input_event(d->rc_input_dev, EV_KEY, event, 1);
+			input_sync(d->rc_input_dev);
+
+			d->last_event = event;
+			d->last_state = REMOTE_KEY_PRESSED;
+			break;
+		case REMOTE_KEY_REPEAT:
+			deb_rc("KEY_REPEAT\n");
+			if (d->last_state != REMOTE_NO_KEY_PRESSED) {
+				deb_rc("repeating event %d\n",d->last_event);
+				input_event(d->rc_input_dev, EV_KEY, d->last_event, 2);
+				input_sync(d->rc_input_dev);
+				d->last_state = REMOTE_KEY_REPEAT;
+			}
+		default:
+			break;
+	}
+*/
+
+schedule:
+	schedule_delayed_work(&d->rc_query_work,msecs_to_jiffies(d->props.rc.legacy.rc_interval));
+}
+
+static int legacy_dvb_usb_remote_init(struct dvb_usb_device *d)
+{
+	int i, err, rc_interval;
+	struct input_dev *input_dev;
+
+	input_dev = input_allocate_device();
+	if (!input_dev)
+		return -ENOMEM;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY);
+	input_dev->name = "IR-receiver inside an USB DVB receiver";
+	input_dev->phys = d->rc_phys;
+	usb_to_input_id(d->udev, &input_dev->id);
+	input_dev->dev.parent = &d->udev->dev;
+	d->input_dev = input_dev;
+	d->rc_dev = NULL;
+
+	input_dev->getkeycode = legacy_dvb_usb_getkeycode;
+	input_dev->setkeycode = legacy_dvb_usb_setkeycode;
+
+	/* set the bits for the keys */
+	deb_rc("key map size: %d\n", d->props.rc.legacy.rc_map_size);
+	for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) {
+		deb_rc("setting bit for event %d item %d\n",
+			d->props.rc.legacy.rc_map_table[i].keycode, i);
+		set_bit(d->props.rc.legacy.rc_map_table[i].keycode, input_dev->keybit);
+	}
+
+	/* setting these two values to non-zero, we have to manage key repeats */
+	input_dev->rep[REP_PERIOD] = d->props.rc.legacy.rc_interval;
+	input_dev->rep[REP_DELAY]  = d->props.rc.legacy.rc_interval + 150;
+
+	input_set_drvdata(input_dev, d);
+
+	err = input_register_device(input_dev);
+	if (err)
+		input_free_device(input_dev);
+
+	rc_interval = d->props.rc.legacy.rc_interval;
+
+	INIT_DELAYED_WORK(&d->rc_query_work, legacy_dvb_usb_read_remote_control);
+
+	info("schedule remote query interval to %d msecs.", rc_interval);
+	schedule_delayed_work(&d->rc_query_work,
+			      msecs_to_jiffies(rc_interval));
+
+	d->state |= DVB_USB_STATE_REMOTE;
+
+	return err;
+}
+
+/* Remote-control poll function - called every dib->rc_query_interval ms to see
+ * whether the remote control has received anything.
+ *
+ * TODO: Fix the repeat rate of the input device.
+ */
+static void dvb_usb_read_remote_control(struct work_struct *work)
+{
+	struct dvb_usb_device *d =
+		container_of(work, struct dvb_usb_device, rc_query_work.work);
+	int err;
+
+	/* TODO: need a lock here.  We can simply skip checking for the remote control
+	   if we're busy. */
+
+	/* when the parameter has been set to 1 via sysfs while the
+	 * driver was running, or when bulk mode is enabled after IR init
+	 */
+	if (dvb_usb_disable_rc_polling || d->props.rc.core.bulk_mode)
+		return;
+
+	err = d->props.rc.core.rc_query(d);
+	if (err)
+		err("error %d while querying for an remote control event.", err);
+
+	schedule_delayed_work(&d->rc_query_work,
+			      msecs_to_jiffies(d->props.rc.core.rc_interval));
+}
+
+static int rc_core_dvb_usb_remote_init(struct dvb_usb_device *d)
+{
+	int err, rc_interval;
+	struct rc_dev *dev;
+
+	dev = rc_allocate_device(d->props.rc.core.driver_type);
+	if (!dev)
+		return -ENOMEM;
+
+	dev->driver_name = d->props.rc.core.module_name;
+	dev->map_name = d->props.rc.core.rc_codes;
+	dev->change_protocol = d->props.rc.core.change_protocol;
+	dev->allowed_protocols = d->props.rc.core.allowed_protos;
+	usb_to_input_id(d->udev, &dev->input_id);
+	dev->device_name = d->desc->name;
+	dev->input_phys = d->rc_phys;
+	dev->dev.parent = &d->udev->dev;
+	dev->priv = d;
+	dev->scancode_mask = d->props.rc.core.scancode_mask;
+
+	err = rc_register_device(dev);
+	if (err < 0) {
+		rc_free_device(dev);
+		return err;
+	}
+
+	d->input_dev = NULL;
+	d->rc_dev = dev;
+
+	if (!d->props.rc.core.rc_query || d->props.rc.core.bulk_mode)
+		return 0;
+
+	/* Polling mode - initialize a work queue for handling it */
+	INIT_DELAYED_WORK(&d->rc_query_work, dvb_usb_read_remote_control);
+
+	rc_interval = d->props.rc.core.rc_interval;
+
+	info("schedule remote query interval to %d msecs.", rc_interval);
+	schedule_delayed_work(&d->rc_query_work,
+			      msecs_to_jiffies(rc_interval));
+
+	return 0;
+}
+
+int dvb_usb_remote_init(struct dvb_usb_device *d)
+{
+	int err;
+
+	if (dvb_usb_disable_rc_polling)
+		return 0;
+
+	if (d->props.rc.legacy.rc_map_table && d->props.rc.legacy.rc_query)
+		d->props.rc.mode = DVB_RC_LEGACY;
+	else if (d->props.rc.core.rc_codes)
+		d->props.rc.mode = DVB_RC_CORE;
+	else
+		return 0;
+
+	usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys));
+	strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys));
+
+	/* Start the remote-control polling. */
+	if (d->props.rc.legacy.rc_interval < 40)
+		d->props.rc.legacy.rc_interval = 100; /* default */
+
+	if (d->props.rc.mode == DVB_RC_LEGACY)
+		err = legacy_dvb_usb_remote_init(d);
+	else
+		err = rc_core_dvb_usb_remote_init(d);
+	if (err)
+		return err;
+
+	d->state |= DVB_USB_STATE_REMOTE;
+
+	return 0;
+}
+
+int dvb_usb_remote_exit(struct dvb_usb_device *d)
+{
+	if (d->state & DVB_USB_STATE_REMOTE) {
+		cancel_delayed_work_sync(&d->rc_query_work);
+		if (d->props.rc.mode == DVB_RC_LEGACY)
+			input_unregister_device(d->input_dev);
+		else
+			rc_unregister_device(d->rc_dev);
+	}
+	d->state &= ~DVB_USB_STATE_REMOTE;
+	return 0;
+}
+
+#define DVB_USB_RC_NEC_EMPTY           0x00
+#define DVB_USB_RC_NEC_KEY_PRESSED     0x01
+#define DVB_USB_RC_NEC_KEY_REPEATED    0x02
+int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *d,
+		u8 keybuf[5], u32 *event, int *state)
+{
+	int i;
+	struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
+	*event = 0;
+	*state = REMOTE_NO_KEY_PRESSED;
+	switch (keybuf[0]) {
+		case DVB_USB_RC_NEC_EMPTY:
+			break;
+		case DVB_USB_RC_NEC_KEY_PRESSED:
+			if ((u8) ~keybuf[1] != keybuf[2] ||
+				(u8) ~keybuf[3] != keybuf[4]) {
+				deb_err("remote control checksum failed.\n");
+				break;
+			}
+			/* See if we can match the raw key code. */
+			for (i = 0; i < d->props.rc.legacy.rc_map_size; i++)
+				if (rc5_custom(&keymap[i]) == keybuf[1] &&
+					rc5_data(&keymap[i]) == keybuf[3]) {
+					*event = keymap[i].keycode;
+					*state = REMOTE_KEY_PRESSED;
+					return 0;
+				}
+			deb_err("key mapping failed - no appropriate key found in keymapping\n");
+			break;
+		case DVB_USB_RC_NEC_KEY_REPEATED:
+			*state = REMOTE_KEY_REPEAT;
+			break;
+		default:
+			deb_err("unknown type of remote status: %d\n",keybuf[0]);
+			break;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(dvb_usb_nec_rc_key_to_event);