Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 529 insertions, 0 deletions

diff --git a/drivers/media/usb/dvb-usb/dvb-usb.h b/drivers/media/usb/dvb-usb/dvb-usb.h
new file mode 100644
index 000000000..0990aa4a1
--- /dev/null
+++ b/drivers/media/usb/dvb-usb/dvb-usb.h
@@ -0,0 +1,529 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* dvb-usb.h is part of the DVB USB library.
+ *
+ * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@posteo.de)
+ * see dvb-usb-init.c for copyright information.
+ *
+ * the headerfile, all dvb-usb-drivers have to include.
+ *
+ * TODO: clean-up the structures for unused fields and update the comments
+ */
+#ifndef __DVB_USB_H__
+#define __DVB_USB_H__
+
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/firmware.h>
+#include <linux/mutex.h>
+#include <media/rc-core.h>
+
+#include <media/dvb_frontend.h>
+#include <media/dvb_demux.h>
+#include <media/dvb_net.h>
+#include <media/dmxdev.h>
+
+#include "dvb-pll.h"
+
+#include <media/dvb-usb-ids.h>
+
+/* debug */
+#ifdef CONFIG_DVB_USB_DEBUG
+#define dprintk(var, level, args...) \
+	    do { if (((var) & (level))) { printk(args); } } while (0)
+
+#define debug_dump(b, l, func) {\
+	int loop_; \
+	for (loop_ = 0; loop_ < (l); loop_++) \
+		func("%02x ", b[loop_]); \
+	func("\n");\
+}
+#define DVB_USB_DEBUG_STATUS
+#else
+#define dprintk(var, level, args...) no_printk(args)
+#define debug_dump(b, l, func) do { } while (0)
+
+#define DVB_USB_DEBUG_STATUS " (debugging is not enabled)"
+
+#endif
+
+/* generic log methods - taken from usb.h */
+#ifndef DVB_USB_LOG_PREFIX
+ #define DVB_USB_LOG_PREFIX "dvb-usb (please define a log prefix)"
+#endif
+
+#undef err
+#define err(format, arg...)  printk(KERN_ERR     DVB_USB_LOG_PREFIX ": " format "\n" , ## arg)
+#undef info
+#define info(format, arg...) printk(KERN_INFO    DVB_USB_LOG_PREFIX ": " format "\n" , ## arg)
+#undef warn
+#define warn(format, arg...) printk(KERN_WARNING DVB_USB_LOG_PREFIX ": " format "\n" , ## arg)
+
+/**
+ * struct dvb_usb_device_description - name and its according USB IDs
+ * @name: real name of the box, regardless which DVB USB device class is in use
+ * @cold_ids: array of struct usb_device_id which describe the device in
+ *  pre-firmware state
+ * @warm_ids: array of struct usb_device_id which describe the device in
+ *  post-firmware state
+ *
+ * Each DVB USB device class can have one or more actual devices, this struct
+ * assigns a name to it.
+ */
+struct dvb_usb_device_description {
+	const char *name;
+
+#define DVB_USB_ID_MAX_NUM 15
+	struct usb_device_id *cold_ids[DVB_USB_ID_MAX_NUM];
+	struct usb_device_id *warm_ids[DVB_USB_ID_MAX_NUM];
+};
+
+static inline u8 rc5_custom(struct rc_map_table *key)
+{
+	return (key->scancode >> 8) & 0xff;
+}
+
+static inline u8 rc5_data(struct rc_map_table *key)
+{
+	return key->scancode & 0xff;
+}
+
+static inline u16 rc5_scan(struct rc_map_table *key)
+{
+	return key->scancode & 0xffff;
+}
+
+struct dvb_usb_device;
+struct dvb_usb_adapter;
+struct usb_data_stream;
+
+/*
+ * Properties of USB streaming - TODO this structure should be somewhere else
+ * describes the kind of USB transfer used for data-streaming.
+ *  (BULK or ISOC)
+ */
+struct usb_data_stream_properties {
+#define USB_BULK  1
+#define USB_ISOC  2
+	int type;
+	int count;
+	int endpoint;
+
+	union {
+		struct {
+			int buffersize; /* per URB */
+		} bulk;
+		struct {
+			int framesperurb;
+			int framesize;
+			int interval;
+		} isoc;
+	} u;
+};
+
+/**
+ * struct dvb_usb_adapter_fe_properties - properties of a dvb-usb-adapter.
+ *    A DVB-USB-Adapter is basically a dvb_adapter which is present on a USB-device.
+ * @caps: capabilities of the DVB USB device.
+ * @pid_filter_count: number of PID filter position in the optional hardware
+ *  PID-filter.
+ * @num_frontends: number of frontends of the DVB USB adapter.
+ * @frontend_ctrl: called to power on/off active frontend.
+ * @streaming_ctrl: called to start and stop the MPEG2-TS streaming of the
+ *  device (not URB submitting/killing).
+ *  This callback will be called without data URBs being active - data URBs
+ *  will be submitted only after streaming_ctrl(1) returns successfully and
+ *  they will be killed before streaming_ctrl(0) gets called.
+ * @pid_filter_ctrl: called to en/disable the PID filter, if any.
+ * @pid_filter: called to set/unset a PID for filtering.
+ * @frontend_attach: called to attach the possible frontends (fill fe-field
+ *  of struct dvb_usb_device).
+ * @tuner_attach: called to attach the correct tuner and to fill pll_addr,
+ *  pll_desc and pll_init_buf of struct dvb_usb_device).
+ * @stream: configuration of the USB streaming
+ * @size_of_priv: size of the priv memory in struct dvb_usb_adapter
+ */
+struct dvb_usb_adapter_fe_properties {
+#define DVB_USB_ADAP_HAS_PID_FILTER               0x01
+#define DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF 0x02
+#define DVB_USB_ADAP_NEED_PID_FILTERING           0x04
+#define DVB_USB_ADAP_RECEIVES_204_BYTE_TS         0x08
+#define DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD         0x10
+	int caps;
+	int pid_filter_count;
+
+	int (*streaming_ctrl)  (struct dvb_usb_adapter *, int);
+	int (*pid_filter_ctrl) (struct dvb_usb_adapter *, int);
+	int (*pid_filter)      (struct dvb_usb_adapter *, int, u16, int);
+
+	int (*frontend_attach) (struct dvb_usb_adapter *);
+	int (*tuner_attach)    (struct dvb_usb_adapter *);
+
+	struct usb_data_stream_properties stream;
+
+	int size_of_priv;
+};
+
+#define MAX_NO_OF_FE_PER_ADAP 3
+struct dvb_usb_adapter_properties {
+	int size_of_priv;
+
+	int (*frontend_ctrl)   (struct dvb_frontend *, int);
+
+	int num_frontends;
+	struct dvb_usb_adapter_fe_properties fe[MAX_NO_OF_FE_PER_ADAP];
+};
+
+/**
+ * struct dvb_rc_legacy - old properties of remote controller
+ * @rc_map_table: a hard-wired array of struct rc_map_table (NULL to disable
+ *  remote control handling).
+ * @rc_map_size: number of items in @rc_map_table.
+ * @rc_query: called to query an event event.
+ * @rc_interval: time in ms between two queries.
+ */
+struct dvb_rc_legacy {
+/* remote control properties */
+#define REMOTE_NO_KEY_PRESSED      0x00
+#define REMOTE_KEY_PRESSED         0x01
+#define REMOTE_KEY_REPEAT          0x02
+	struct rc_map_table  *rc_map_table;
+	int rc_map_size;
+	int (*rc_query) (struct dvb_usb_device *, u32 *, int *);
+	int rc_interval;
+};
+
+/**
+ * struct dvb_rc - properties of remote controller, using rc-core
+ * @rc_codes: name of rc codes table
+ * @protocol: type of protocol(s) currently used by the driver
+ * @allowed_protos: protocol(s) supported by the driver
+ * @driver_type: Used to point if a device supports raw mode
+ * @change_protocol: callback to change protocol
+ * @module_name: module name
+ * @rc_query: called to query an event event.
+ * @rc_interval: time in ms between two queries.
+ * @bulk_mode: device supports bulk mode for RC (disable polling mode)
+ * @scancode_mask: scancode mask
+ */
+struct dvb_rc {
+	char *rc_codes;
+	u64 protocol;
+	u64 allowed_protos;
+	enum rc_driver_type driver_type;
+	int (*change_protocol)(struct rc_dev *dev, u64 *rc_proto);
+	char *module_name;
+	int (*rc_query) (struct dvb_usb_device *d);
+	int rc_interval;
+	bool bulk_mode;				/* uses bulk mode */
+	u32 scancode_mask;
+};
+
+/**
+ * enum dvb_usb_mode - Specifies if it is using a legacy driver or a new one
+ *		       based on rc-core
+ * This is initialized/used only inside dvb-usb-remote.c.
+ * It shouldn't be set by the drivers.
+ *
+ * @DVB_RC_LEGACY: legacy driver
+ * @DVB_RC_CORE: rc-core driver
+ */
+enum dvb_usb_mode {
+	DVB_RC_LEGACY,
+	DVB_RC_CORE,
+};
+
+/**
+ * struct dvb_usb_device_properties - properties of a dvb-usb-device
+ * @caps: capabilities
+ * @usb_ctrl: which USB device-side controller is in use. Needed for firmware
+ *  download.
+ * @firmware: name of the firmware file.
+ * @download_firmware: called to download the firmware when the usb_ctrl is
+ *  DEVICE_SPECIFIC.
+ * @no_reconnect: device doesn't do a reconnect after downloading the firmware,
+ *  so do the warm initialization right after it
+ *
+ * @size_of_priv: how many bytes shall be allocated for the private field
+ *  of struct dvb_usb_device.
+ * @priv_init: optional callback to initialize the variable that private field
+ * of struct dvb_usb_device has pointer to just after it had been allocated and
+ * zeroed.
+ * @priv_destroy: just like priv_init, only called before deallocating
+ * the memory pointed by private field of struct dvb_usb_device.
+ *
+ * @num_adapters: the number of adapters in @adapters
+ * @adapter: the adapters
+ * @power_ctrl: called to enable/disable power of the device.
+ * @read_mac_address: called to read the MAC address of the device.
+ * @identify_state: called to determine the state (cold or warm), when it
+ *  is not distinguishable by the USB IDs.
+ *
+ * @rc: remote controller properties
+ *
+ * @i2c_algo: i2c_algorithm if the device has I2CoverUSB.
+ *
+ * @generic_bulk_ctrl_endpoint: most of the DVB USB devices have a generic
+ *  endpoint which received control messages with bulk transfers. When this
+ *  is non-zero, one can use dvb_usb_generic_rw and dvb_usb_generic_write-
+ *  helper functions.
+ *
+ * @generic_bulk_ctrl_endpoint_response: some DVB USB devices use a separate
+ *  endpoint for responses to control messages sent with bulk transfers via
+ *  the generic_bulk_ctrl_endpoint. When this is non-zero, this will be used
+ *  instead of the generic_bulk_ctrl_endpoint when reading usb responses in
+ *  the dvb_usb_generic_rw helper function.
+ *
+ * @num_device_descs: number of struct dvb_usb_device_description in @devices
+ * @devices: array of struct dvb_usb_device_description compatibles with these
+ *  properties.
+ */
+struct dvb_usb_device_properties {
+#define MAX_NO_OF_ADAPTER_PER_DEVICE 2
+#define DVB_USB_IS_AN_I2C_ADAPTER            0x01
+	int caps;
+
+#define DEVICE_SPECIFIC 0
+#define CYPRESS_AN2135  1
+#define CYPRESS_AN2235  2
+#define CYPRESS_FX2     3
+	int        usb_ctrl;
+	int        (*download_firmware) (struct usb_device *, const struct firmware *);
+	const char *firmware;
+	int        no_reconnect;
+
+	int size_of_priv;
+	int (*priv_init)(struct dvb_usb_device *);
+	void (*priv_destroy)(struct dvb_usb_device *);
+
+	int num_adapters;
+	struct dvb_usb_adapter_properties adapter[MAX_NO_OF_ADAPTER_PER_DEVICE];
+
+	int (*power_ctrl)       (struct dvb_usb_device *, int);
+	int (*read_mac_address) (struct dvb_usb_device *, u8 []);
+	int (*identify_state)(struct usb_device *udev,
+			      const struct dvb_usb_device_properties *props,
+			      const struct dvb_usb_device_description **desc,
+			      int *cold);
+
+	struct {
+		enum dvb_usb_mode mode;	/* Drivers shouldn't touch on it */
+		struct dvb_rc_legacy legacy;
+		struct dvb_rc core;
+	} rc;
+
+	struct i2c_algorithm *i2c_algo;
+
+	int generic_bulk_ctrl_endpoint;
+	int generic_bulk_ctrl_endpoint_response;
+
+	int num_device_descs;
+	struct dvb_usb_device_description devices[12];
+};
+
+/**
+ * struct usb_data_stream - generic object of an USB stream
+ * @udev: the USB device
+ * @props: data stream properties
+ * @state: state of the stream
+ * @complete: complete callback
+ * @urb_list: list of URBs
+ * @buf_num: number of buffer allocated.
+ * @buf_size: size of each buffer in buf_list.
+ * @buf_list: array containing all allocate buffers for streaming.
+ * @dma_addr: list of dma_addr_t for each buffer in buf_list.
+ *
+ * @urbs_initialized: number of URBs initialized.
+ * @urbs_submitted: number of URBs submitted.
+ * @user_priv: for private use.
+ */
+struct usb_data_stream {
+#define MAX_NO_URBS_FOR_DATA_STREAM 10
+	struct usb_device                 *udev;
+	struct usb_data_stream_properties  props;
+
+#define USB_STATE_INIT    0x00
+#define USB_STATE_URB_BUF 0x01
+	int state;
+
+	void (*complete) (struct usb_data_stream *, u8 *, size_t);
+
+	struct urb    *urb_list[MAX_NO_URBS_FOR_DATA_STREAM];
+	int            buf_num;
+	unsigned long  buf_size;
+	u8            *buf_list[MAX_NO_URBS_FOR_DATA_STREAM];
+	dma_addr_t     dma_addr[MAX_NO_URBS_FOR_DATA_STREAM];
+
+	int urbs_initialized;
+	int urbs_submitted;
+
+	void *user_priv;
+};
+
+/**
+ * struct dvb_usb_fe_adapter - a DVB adapter on a USB device
+ * @fe: frontend
+ * @fe_init:  rerouted frontend-init (wakeup) function.
+ * @fe_sleep: rerouted frontend-sleep function.
+ * @stream: the usb data stream.
+ * @pid_filtering: is hardware pid_filtering used or not.
+ * @max_feed_count: how many feeds can be handled simultaneously by this
+ *  device
+ * @priv: private pointer
+ */
+struct dvb_usb_fe_adapter {
+	struct dvb_frontend *fe;
+
+	int (*fe_init)  (struct dvb_frontend *);
+	int (*fe_sleep) (struct dvb_frontend *);
+
+	struct usb_data_stream stream;
+
+	int pid_filtering;
+	int max_feed_count;
+
+	void *priv;
+};
+
+/**
+ * struct dvb_usb_adapter - a DVB adapter on a USB device
+ * @dev: DVB USB device pointer
+ * @props: properties
+ * @state: status
+ * @id: index of this adapter (starting with 0).
+ *
+ * @feedcount: number of requested feeds (used for streaming-activation)
+ *
+ * @dvb_adap: device's dvb_adapter.
+ * @dmxdev: device's dmxdev.
+ * @demux: device's software demuxer.
+ * @dvb_net: device's dvb_net interfaces.
+ *
+ * @fe_adap: frontend adapters
+ * @active_fe: active frontend
+ * @num_frontends_initialized: number of initialized frontends
+ * @priv: private pointer
+ */
+struct dvb_usb_adapter {
+	struct dvb_usb_device *dev;
+	struct dvb_usb_adapter_properties props;
+
+#define DVB_USB_ADAP_STATE_INIT 0x000
+#define DVB_USB_ADAP_STATE_DVB  0x001
+	int state;
+
+	u8  id;
+
+	int feedcount;
+
+	/* dvb */
+	struct dvb_adapter   dvb_adap;
+	struct dmxdev        dmxdev;
+	struct dvb_demux     demux;
+	struct dvb_net       dvb_net;
+
+	struct dvb_usb_fe_adapter fe_adap[MAX_NO_OF_FE_PER_ADAP];
+	int active_fe;
+	int num_frontends_initialized;
+
+	void *priv;
+};
+
+/**
+ * struct dvb_usb_device - object of a DVB USB device
+ * @props: copy of the struct dvb_usb_properties this device belongs to.
+ * @desc: pointer to the device's struct dvb_usb_device_description.
+ * @state: initialization and runtime state of the device.
+ *
+ * @powered: indicated whether the device is power or not.
+ *  Powered is in/decremented for each call to modify the state.
+ * @udev: pointer to the device's struct usb_device.
+ *
+ * @data_mutex: mutex to protect the data structure used to store URB data
+ * @usb_mutex: mutex of USB control messages (reading needs two messages).
+ *	Please notice that this mutex is used internally at the generic
+ *	URB control functions. So, drivers using dvb_usb_generic_rw() and
+ *	derivated functions should not lock it internally.
+ * @i2c_mutex: mutex for i2c-transfers
+ *
+ * @i2c_adap: device's i2c_adapter if it uses I2CoverUSB
+ *
+ * @num_adapters_initialized: number of initialized adapters
+ * @adapter: adapters
+ *
+ * @rc_dev: rc device for the remote control (rc-core mode)
+ * @input_dev: input device for the remote control (legacy mode)
+ * @rc_phys: rc device path
+ * @rc_query_work: struct work_struct frequent rc queries
+ * @last_event: last triggered event
+ * @last_state: last state (no, pressed, repeat)
+ * @owner: owner of the dvb_adapter
+ * @priv: private data of the actual driver (allocate by dvb-usb, size defined
+ *  in size_of_priv of dvb_usb_properties).
+ */
+struct dvb_usb_device {
+	struct dvb_usb_device_properties props;
+	const struct dvb_usb_device_description *desc;
+
+	struct usb_device *udev;
+
+#define DVB_USB_STATE_INIT        0x000
+#define DVB_USB_STATE_I2C         0x001
+#define DVB_USB_STATE_DVB         0x002
+#define DVB_USB_STATE_REMOTE      0x004
+	int state;
+
+	int powered;
+
+	/* locking */
+	struct mutex data_mutex;
+	struct mutex usb_mutex;
+
+	/* i2c */
+	struct mutex i2c_mutex;
+	struct i2c_adapter i2c_adap;
+
+	int                    num_adapters_initialized;
+	struct dvb_usb_adapter adapter[MAX_NO_OF_ADAPTER_PER_DEVICE];
+
+	/* remote control */
+	struct rc_dev *rc_dev;
+	struct input_dev *input_dev;
+	char rc_phys[64];
+	struct delayed_work rc_query_work;
+	u32 last_event;
+	int last_state;
+
+	struct module *owner;
+
+	void *priv;
+};
+
+extern int dvb_usb_device_init(struct usb_interface *,
+			       const struct dvb_usb_device_properties *,
+			       struct module *, struct dvb_usb_device **,
+			       short *adapter_nums);
+extern void dvb_usb_device_exit(struct usb_interface *);
+
+/* the generic read/write method for device control */
+extern int __must_check
+dvb_usb_generic_rw(struct dvb_usb_device *, u8 *, u16, u8 *, u16, int);
+extern int __must_check
+dvb_usb_generic_write(struct dvb_usb_device *, u8 *, u16);
+
+/* commonly used remote control parsing */
+int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *d, u8 keybuf[5],
+				u32 *event, int *state);
+
+/* commonly used firmware download types and function */
+struct hexline {
+	u8 len;
+	u32 addr;
+	u8 type;
+	u8 data[255];
+	u8 chk;
+};
+extern int usb_cypress_load_firmware(struct usb_device *udev, const struct firmware *fw, int type);
+extern int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx, int *pos);
+
+
+#endif