Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 400 insertions, 0 deletions

diff --git a/drivers/media/usb/dvb-usb/gp8psk.c b/drivers/media/usb/dvb-usb/gp8psk.c
new file mode 100644
index 000000000..b2b27a86d
--- /dev/null
+++ b/drivers/media/usb/dvb-usb/gp8psk.c
@@ -0,0 +1,400 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* DVB USB compliant Linux driver for the
+ *  - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module
+ *
+ * Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com)
+ * Copyright (C) 2006,2007 Genpix Electronics (genpix@genpix-electronics.com)
+ *
+ * Thanks to GENPIX for the sample code used to implement this module.
+ *
+ * This module is based off the vp7045 and vp702x modules
+ *
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
+ */
+#include "gp8psk.h"
+#include "gp8psk-fe.h"
+
+/* debug */
+static char bcm4500_firmware[] = "dvb-usb-gp8psk-02.fw";
+int dvb_usb_gp8psk_debug;
+module_param_named(debug,dvb_usb_gp8psk_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS);
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+struct gp8psk_state {
+	unsigned char data[80];
+};
+
+static int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value,
+			    u16 index, u8 *b, int blen)
+{
+	struct gp8psk_state *st = d->priv;
+	int ret = 0,try = 0;
+
+	if (blen > sizeof(st->data))
+		return -EIO;
+
+	if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
+		return ret;
+
+	while (ret >= 0 && ret != blen && try < 3) {
+		ret = usb_control_msg(d->udev,
+			usb_rcvctrlpipe(d->udev,0),
+			req,
+			USB_TYPE_VENDOR | USB_DIR_IN,
+			value, index, st->data, blen,
+			2000);
+		deb_info("reading number %d (ret: %d)\n",try,ret);
+		try++;
+	}
+
+	if (ret < 0 || ret != blen) {
+		warn("usb in %d operation failed.", req);
+		ret = -EIO;
+	} else {
+		ret = 0;
+		memcpy(b, st->data, blen);
+	}
+
+	deb_xfer("in: req. %x, val: %x, ind: %x, buffer: ",req,value,index);
+	debug_dump(b,blen,deb_xfer);
+
+	mutex_unlock(&d->usb_mutex);
+
+	return ret;
+}
+
+static int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
+			     u16 index, u8 *b, int blen)
+{
+	struct gp8psk_state *st = d->priv;
+	int ret;
+
+	deb_xfer("out: req. %x, val: %x, ind: %x, buffer: ",req,value,index);
+	debug_dump(b,blen,deb_xfer);
+
+	if (blen > sizeof(st->data))
+		return -EIO;
+
+	if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
+		return ret;
+
+	memcpy(st->data, b, blen);
+	if (usb_control_msg(d->udev,
+			usb_sndctrlpipe(d->udev,0),
+			req,
+			USB_TYPE_VENDOR | USB_DIR_OUT,
+			value, index, st->data, blen,
+			2000) != blen) {
+		warn("usb out operation failed.");
+		ret = -EIO;
+	} else
+		ret = 0;
+	mutex_unlock(&d->usb_mutex);
+
+	return ret;
+}
+
+
+static int gp8psk_get_fw_version(struct dvb_usb_device *d, u8 *fw_vers)
+{
+	return gp8psk_usb_in_op(d, GET_FW_VERS, 0, 0, fw_vers, 6);
+}
+
+static int gp8psk_get_fpga_version(struct dvb_usb_device *d, u8 *fpga_vers)
+{
+	return gp8psk_usb_in_op(d, GET_FPGA_VERS, 0, 0, fpga_vers, 1);
+}
+
+static void gp8psk_info(struct dvb_usb_device *d)
+{
+	u8 fpga_vers, fw_vers[6];
+
+	if (!gp8psk_get_fw_version(d, fw_vers))
+		info("FW Version = %i.%02i.%i (0x%x)  Build %4i/%02i/%02i",
+		fw_vers[2], fw_vers[1], fw_vers[0], GP8PSK_FW_VERS(fw_vers),
+		2000 + fw_vers[5], fw_vers[4], fw_vers[3]);
+	else
+		info("failed to get FW version");
+
+	if (!gp8psk_get_fpga_version(d, &fpga_vers))
+		info("FPGA Version = %i", fpga_vers);
+	else
+		info("failed to get FPGA version");
+}
+
+static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d)
+{
+	int ret;
+	const struct firmware *fw = NULL;
+	const u8 *ptr;
+	u8 *buf;
+	if ((ret = request_firmware(&fw, bcm4500_firmware,
+					&d->udev->dev)) != 0) {
+		err("did not find the bcm4500 firmware file '%s' (status %d). You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware",
+			bcm4500_firmware,ret);
+		return ret;
+	}
+
+	ret = -EINVAL;
+
+	if (gp8psk_usb_out_op(d, LOAD_BCM4500,1,0,NULL, 0))
+		goto out_rel_fw;
+
+	info("downloading bcm4500 firmware from file '%s'",bcm4500_firmware);
+
+	ptr = fw->data;
+	buf = kmalloc(64, GFP_KERNEL);
+	if (!buf) {
+		ret = -ENOMEM;
+		goto out_rel_fw;
+	}
+
+	while (ptr[0] != 0xff) {
+		u16 buflen = ptr[0] + 4;
+		if (ptr + buflen >= fw->data + fw->size) {
+			err("failed to load bcm4500 firmware.");
+			goto out_free;
+		}
+		if (buflen > 64) {
+			err("firmware chunk size bigger than 64 bytes.");
+			goto out_free;
+		}
+
+		memcpy(buf, ptr, buflen);
+		if (dvb_usb_generic_write(d, buf, buflen)) {
+			err("failed to load bcm4500 firmware.");
+			goto out_free;
+		}
+		ptr += buflen;
+	}
+
+	ret = 0;
+
+out_free:
+	kfree(buf);
+out_rel_fw:
+	release_firmware(fw);
+
+	return ret;
+}
+
+static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+	u8 status = 0, buf;
+	int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct);
+
+	if (onoff) {
+		gp8psk_usb_in_op(d, GET_8PSK_CONFIG,0,0,&status,1);
+		if (! (status & bm8pskStarted)) {  /* started */
+			if(gp_product_id == USB_PID_GENPIX_SKYWALKER_CW3K)
+				gp8psk_usb_out_op(d, CW3K_INIT, 1, 0, NULL, 0);
+			if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1))
+				return -EINVAL;
+			gp8psk_info(d);
+		}
+
+		if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
+			if (! (status & bm8pskFW_Loaded)) /* BCM4500 firmware loaded */
+				if(gp8psk_load_bcm4500fw(d))
+					return -EINVAL;
+
+		if (! (status & bmIntersilOn)) /* LNB Power */
+			if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0,
+					&buf, 1))
+				return -EINVAL;
+
+		/* Set DVB mode to 1 */
+		if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
+			if (gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0))
+				return -EINVAL;
+		/* Abort possible TS (if previous tune crashed) */
+		if (gp8psk_usb_out_op(d, ARM_TRANSFER, 0, 0, NULL, 0))
+			return -EINVAL;
+	} else {
+		/* Turn off LNB power */
+		if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1))
+			return -EINVAL;
+		/* Turn off 8psk power */
+		if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1))
+			return -EINVAL;
+		if(gp_product_id == USB_PID_GENPIX_SKYWALKER_CW3K)
+			gp8psk_usb_out_op(d, CW3K_INIT, 0, 0, NULL, 0);
+	}
+	return 0;
+}
+
+static int gp8psk_bcm4500_reload(struct dvb_usb_device *d)
+{
+	u8 buf;
+	int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct);
+
+	deb_xfer("reloading firmware\n");
+
+	/* Turn off 8psk power */
+	if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1))
+		return -EINVAL;
+	/* Turn On 8psk power */
+	if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1))
+		return -EINVAL;
+	/* load BCM4500 firmware */
+	if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
+		if (gp8psk_load_bcm4500fw(d))
+			return -EINVAL;
+	return 0;
+}
+
+static int gp8psk_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+	return gp8psk_usb_out_op(adap->dev, ARM_TRANSFER, onoff, 0 , NULL, 0);
+}
+
+/* Callbacks for gp8psk-fe.c */
+
+static int gp8psk_fe_in(void *priv, u8 req, u16 value,
+			    u16 index, u8 *b, int blen)
+{
+	struct dvb_usb_device *d = priv;
+
+	return gp8psk_usb_in_op(d, req, value, index, b, blen);
+}
+
+static int gp8psk_fe_out(void *priv, u8 req, u16 value,
+			    u16 index, u8 *b, int blen)
+{
+	struct dvb_usb_device *d = priv;
+
+	return gp8psk_usb_out_op(d, req, value, index, b, blen);
+}
+
+static int gp8psk_fe_reload(void *priv)
+{
+	struct dvb_usb_device *d = priv;
+
+	return gp8psk_bcm4500_reload(d);
+}
+
+static const struct gp8psk_fe_ops gp8psk_fe_ops = {
+	.in = gp8psk_fe_in,
+	.out = gp8psk_fe_out,
+	.reload = gp8psk_fe_reload,
+};
+
+static int gp8psk_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dvb_usb_device *d = adap->dev;
+	int id = le16_to_cpu(d->udev->descriptor.idProduct);
+	int is_rev1;
+
+	is_rev1 = (id == USB_PID_GENPIX_8PSK_REV_1_WARM) ? true : false;
+
+	adap->fe_adap[0].fe = dvb_attach(gp8psk_fe_attach,
+					 &gp8psk_fe_ops, d, is_rev1);
+	return 0;
+}
+
+static struct dvb_usb_device_properties gp8psk_properties;
+
+static int gp8psk_usb_probe(struct usb_interface *intf,
+		const struct usb_device_id *id)
+{
+	int ret;
+	struct usb_device *udev = interface_to_usbdev(intf);
+	ret = dvb_usb_device_init(intf, &gp8psk_properties,
+				  THIS_MODULE, NULL, adapter_nr);
+	if (ret == 0) {
+		info("found Genpix USB device pID = %x (hex)",
+			le16_to_cpu(udev->descriptor.idProduct));
+	}
+	return ret;
+}
+
+enum {
+	GENPIX_8PSK_REV_1_COLD,
+	GENPIX_8PSK_REV_1_WARM,
+	GENPIX_8PSK_REV_2,
+	GENPIX_SKYWALKER_1,
+	GENPIX_SKYWALKER_2,
+	GENPIX_SKYWALKER_CW3K,
+};
+
+static struct usb_device_id gp8psk_usb_table[] = {
+	DVB_USB_DEV(GENPIX, GENPIX_8PSK_REV_1_COLD),
+	DVB_USB_DEV(GENPIX, GENPIX_8PSK_REV_1_WARM),
+	DVB_USB_DEV(GENPIX, GENPIX_8PSK_REV_2),
+	DVB_USB_DEV(GENPIX, GENPIX_SKYWALKER_1),
+	DVB_USB_DEV(GENPIX, GENPIX_SKYWALKER_2),
+	DVB_USB_DEV(GENPIX, GENPIX_SKYWALKER_CW3K),
+	{ }
+};
+
+MODULE_DEVICE_TABLE(usb, gp8psk_usb_table);
+
+static struct dvb_usb_device_properties gp8psk_properties = {
+	.usb_ctrl = CYPRESS_FX2,
+	.firmware = "dvb-usb-gp8psk-01.fw",
+
+	.size_of_priv = sizeof(struct gp8psk_state),
+
+	.num_adapters = 1,
+	.adapter = {
+		{
+		.num_frontends = 1,
+		.fe = {{
+			.streaming_ctrl   = gp8psk_streaming_ctrl,
+			.frontend_attach  = gp8psk_frontend_attach,
+			/* parameter for the MPEG2-data transfer */
+			.stream = {
+				.type = USB_BULK,
+				.count = 7,
+				.endpoint = 0x82,
+				.u = {
+					.bulk = {
+						.buffersize = 8192,
+					}
+				}
+			},
+		}},
+		}
+	},
+	.power_ctrl       = gp8psk_power_ctrl,
+
+	.generic_bulk_ctrl_endpoint = 0x01,
+
+	.num_device_descs = 4,
+	.devices = {
+		{ .name = "Genpix 8PSK-to-USB2 Rev.1 DVB-S receiver",
+		  .cold_ids = { &gp8psk_usb_table[GENPIX_8PSK_REV_1_COLD], NULL },
+		  .warm_ids = { &gp8psk_usb_table[GENPIX_8PSK_REV_1_WARM], NULL },
+		},
+		{ .name = "Genpix 8PSK-to-USB2 Rev.2 DVB-S receiver",
+		  .cold_ids = { NULL },
+		  .warm_ids = { &gp8psk_usb_table[GENPIX_8PSK_REV_2], NULL },
+		},
+		{ .name = "Genpix SkyWalker-1 DVB-S receiver",
+		  .cold_ids = { NULL },
+		  .warm_ids = { &gp8psk_usb_table[GENPIX_SKYWALKER_1], NULL },
+		},
+		{ .name = "Genpix SkyWalker-2 DVB-S receiver",
+		  .cold_ids = { NULL },
+		  .warm_ids = { &gp8psk_usb_table[GENPIX_SKYWALKER_2], NULL },
+		},
+		{ NULL },
+	}
+};
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver gp8psk_usb_driver = {
+	.name		= "dvb_usb_gp8psk",
+	.probe		= gp8psk_usb_probe,
+	.disconnect = dvb_usb_device_exit,
+	.id_table	= gp8psk_usb_table,
+};
+
+module_usb_driver(gp8psk_usb_driver);
+
+MODULE_AUTHOR("Alan Nisota <alannisota@gamil.com>");
+MODULE_DESCRIPTION("Driver for Genpix DVB-S");
+MODULE_VERSION("1.1");
+MODULE_LICENSE("GPL");