Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 585 insertions, 0 deletions

diff --git a/drivers/media/usb/dvb-usb/opera1.c b/drivers/media/usb/dvb-usb/opera1.c
new file mode 100644
index 000000000..0da86f58a
--- /dev/null
+++ b/drivers/media/usb/dvb-usb/opera1.c
@@ -0,0 +1,585 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* DVB USB framework compliant Linux driver for the Opera1 DVB-S Card
+*
+* Copyright (C) 2006 Mario Hlawitschka (dh1pa@amsat.org)
+* Copyright (C) 2006 Marco Gittler (g.marco@freenet.de)
+*
+* see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
+*/
+
+#define DVB_USB_LOG_PREFIX "opera"
+
+#include "dvb-usb.h"
+#include "stv0299.h"
+
+#define OPERA_READ_MSG 0
+#define OPERA_WRITE_MSG 1
+#define OPERA_I2C_TUNER 0xd1
+
+#define READ_FX2_REG_REQ  0xba
+#define READ_MAC_ADDR 0x08
+#define OPERA_WRITE_FX2 0xbb
+#define OPERA_TUNER_REQ 0xb1
+#define REG_1F_SYMBOLRATE_BYTE0 0x1f
+#define REG_20_SYMBOLRATE_BYTE1 0x20
+#define REG_21_SYMBOLRATE_BYTE2 0x21
+
+#define ADDR_B600_VOLTAGE_13V (0x02)
+#define ADDR_B601_VOLTAGE_18V (0x03)
+#define ADDR_B1A6_STREAM_CTRL (0x04)
+#define ADDR_B880_READ_REMOTE (0x05)
+
+struct opera1_state {
+	u32 last_key_pressed;
+};
+struct rc_map_opera_table {
+	u32 keycode;
+	u32 event;
+};
+
+static int dvb_usb_opera1_debug;
+module_param_named(debug, dvb_usb_opera1_debug, int, 0644);
+MODULE_PARM_DESC(debug,
+		 "set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64 (or-able))."
+		 DVB_USB_DEBUG_STATUS);
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+
+static int opera1_xilinx_rw(struct usb_device *dev, u8 request, u16 value,
+			    u8 * data, u16 len, int flags)
+{
+	int ret;
+	u8 tmp;
+	u8 *buf;
+	unsigned int pipe = (flags == OPERA_READ_MSG) ?
+		usb_rcvctrlpipe(dev,0) : usb_sndctrlpipe(dev, 0);
+	u8 request_type = (flags == OPERA_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT;
+
+	buf = kmalloc(len, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	if (flags == OPERA_WRITE_MSG)
+		memcpy(buf, data, len);
+	ret = usb_control_msg(dev, pipe, request,
+			request_type | USB_TYPE_VENDOR, value, 0x0,
+			buf, len, 2000);
+
+	if (request == OPERA_TUNER_REQ) {
+		tmp = buf[0];
+		if (usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			    OPERA_TUNER_REQ, USB_DIR_IN | USB_TYPE_VENDOR,
+			    0x01, 0x0, buf, 1, 2000) < 1 || buf[0] != 0x08) {
+			ret = 0;
+			goto out;
+		}
+		buf[0] = tmp;
+	}
+	if (flags == OPERA_READ_MSG)
+		memcpy(data, buf, len);
+out:
+	kfree(buf);
+	return ret;
+}
+
+/* I2C */
+
+static int opera1_usb_i2c_msgxfer(struct dvb_usb_device *dev, u16 addr,
+				  u8 * buf, u16 len)
+{
+	int ret = 0;
+	u8 request;
+	u16 value;
+
+	if (!dev) {
+		info("no usb_device");
+		return -EINVAL;
+	}
+	if (mutex_lock_interruptible(&dev->usb_mutex) < 0)
+		return -EAGAIN;
+
+	switch (addr>>1){
+		case ADDR_B600_VOLTAGE_13V:
+			request=0xb6;
+			value=0x00;
+			break;
+		case ADDR_B601_VOLTAGE_18V:
+			request=0xb6;
+			value=0x01;
+			break;
+		case ADDR_B1A6_STREAM_CTRL:
+			request=0xb1;
+			value=0xa6;
+			break;
+		case ADDR_B880_READ_REMOTE:
+			request=0xb8;
+			value=0x80;
+			break;
+		default:
+			request=0xb1;
+			value=addr;
+	}
+	ret = opera1_xilinx_rw(dev->udev, request,
+		value, buf, len,
+		addr&0x01?OPERA_READ_MSG:OPERA_WRITE_MSG);
+
+	mutex_unlock(&dev->usb_mutex);
+	return ret;
+}
+
+static int opera1_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+			   int num)
+{
+	struct dvb_usb_device *d = i2c_get_adapdata(adap);
+	int i = 0, tmp = 0;
+
+	if (!d)
+		return -ENODEV;
+	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+		return -EAGAIN;
+
+	for (i = 0; i < num; i++) {
+		if ((tmp = opera1_usb_i2c_msgxfer(d,
+					(msg[i].addr<<1)|(msg[i].flags&I2C_M_RD?0x01:0),
+					msg[i].buf,
+					msg[i].len
+					)) != msg[i].len) {
+			break;
+		}
+		if (dvb_usb_opera1_debug & 0x10)
+			info("sending i2c message %d %d", tmp, msg[i].len);
+	}
+	mutex_unlock(&d->i2c_mutex);
+	return num;
+}
+
+static u32 opera1_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm opera1_i2c_algo = {
+	.master_xfer = opera1_i2c_xfer,
+	.functionality = opera1_i2c_func,
+};
+
+static int opera1_set_voltage(struct dvb_frontend *fe,
+			      enum fe_sec_voltage voltage)
+{
+	static u8 command_13v[1]={0x00};
+	static u8 command_18v[1]={0x01};
+	struct i2c_msg msg[] = {
+		{.addr = ADDR_B600_VOLTAGE_13V,.flags = 0,.buf = command_13v,.len = 1},
+	};
+	struct dvb_usb_adapter *udev_adap =
+	    (struct dvb_usb_adapter *)(fe->dvb->priv);
+	if (voltage == SEC_VOLTAGE_18) {
+		msg[0].addr = ADDR_B601_VOLTAGE_18V;
+		msg[0].buf = command_18v;
+	}
+	i2c_transfer(&udev_adap->dev->i2c_adap, msg, 1);
+	return 0;
+}
+
+static int opera1_stv0299_set_symbol_rate(struct dvb_frontend *fe, u32 srate,
+					  u32 ratio)
+{
+	stv0299_writereg(fe, 0x13, 0x98);
+	stv0299_writereg(fe, 0x14, 0x95);
+	stv0299_writereg(fe, REG_1F_SYMBOLRATE_BYTE0, (ratio >> 16) & 0xff);
+	stv0299_writereg(fe, REG_20_SYMBOLRATE_BYTE1, (ratio >> 8) & 0xff);
+	stv0299_writereg(fe, REG_21_SYMBOLRATE_BYTE2, (ratio) & 0xf0);
+	return 0;
+
+}
+static u8 opera1_inittab[] = {
+	0x00, 0xa1,
+	0x01, 0x15,
+	0x02, 0x30,
+	0x03, 0x00,
+	0x04, 0x7d,
+	0x05, 0x05,
+	0x06, 0x02,
+	0x07, 0x00,
+	0x0b, 0x00,
+	0x0c, 0x01,
+	0x0d, 0x81,
+	0x0e, 0x44,
+	0x0f, 0x19,
+	0x10, 0x3f,
+	0x11, 0x84,
+	0x12, 0xda,
+	0x13, 0x98,
+	0x14, 0x95,
+	0x15, 0xc9,
+	0x16, 0xeb,
+	0x17, 0x00,
+	0x18, 0x19,
+	0x19, 0x8b,
+	0x1a, 0x00,
+	0x1b, 0x82,
+	0x1c, 0x7f,
+	0x1d, 0x00,
+	0x1e, 0x00,
+	REG_1F_SYMBOLRATE_BYTE0, 0x06,
+	REG_20_SYMBOLRATE_BYTE1, 0x50,
+	REG_21_SYMBOLRATE_BYTE2, 0x10,
+	0x22, 0x00,
+	0x23, 0x00,
+	0x24, 0x37,
+	0x25, 0xbc,
+	0x26, 0x00,
+	0x27, 0x00,
+	0x28, 0x00,
+	0x29, 0x1e,
+	0x2a, 0x14,
+	0x2b, 0x1f,
+	0x2c, 0x09,
+	0x2d, 0x0a,
+	0x2e, 0x00,
+	0x2f, 0x00,
+	0x30, 0x00,
+	0x31, 0x1f,
+	0x32, 0x19,
+	0x33, 0xfc,
+	0x34, 0x13,
+	0xff, 0xff,
+};
+
+static struct stv0299_config opera1_stv0299_config = {
+	.demod_address = 0xd0>>1,
+	.min_delay_ms = 100,
+	.mclk = 88000000UL,
+	.invert = 1,
+	.skip_reinit = 0,
+	.lock_output = STV0299_LOCKOUTPUT_0,
+	.volt13_op0_op1 = STV0299_VOLT13_OP0,
+	.inittab = opera1_inittab,
+	.set_symbol_rate = opera1_stv0299_set_symbol_rate,
+};
+
+static int opera1_frontend_attach(struct dvb_usb_adapter *d)
+{
+	d->fe_adap[0].fe = dvb_attach(stv0299_attach, &opera1_stv0299_config,
+				      &d->dev->i2c_adap);
+	if ((d->fe_adap[0].fe) != NULL) {
+		d->fe_adap[0].fe->ops.set_voltage = opera1_set_voltage;
+		return 0;
+	}
+	info("not attached stv0299");
+	return -EIO;
+}
+
+static int opera1_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	dvb_attach(
+		dvb_pll_attach, adap->fe_adap[0].fe, 0xc0>>1,
+		&adap->dev->i2c_adap, DVB_PLL_OPERA1
+	);
+	return 0;
+}
+
+static int opera1_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+	u8 val = onoff ? 0x01 : 0x00;
+
+	if (dvb_usb_opera1_debug)
+		info("power %s", onoff ? "on" : "off");
+	return opera1_xilinx_rw(d->udev, 0xb7, val,
+				&val, 1, OPERA_WRITE_MSG);
+}
+
+static int opera1_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+	static u8 buf_start[2] = { 0xff, 0x03 };
+	static u8 buf_stop[2] = { 0xff, 0x00 };
+	struct i2c_msg start_tuner[] = {
+		{.addr = ADDR_B1A6_STREAM_CTRL,.buf = onoff ? buf_start : buf_stop,.len = 2},
+	};
+	if (dvb_usb_opera1_debug)
+		info("streaming %s", onoff ? "on" : "off");
+	i2c_transfer(&adap->dev->i2c_adap, start_tuner, 1);
+	return 0;
+}
+
+static int opera1_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid,
+			     int onoff)
+{
+	u8 b_pid[3];
+	struct i2c_msg msg[] = {
+		{.addr = ADDR_B1A6_STREAM_CTRL,.buf = b_pid,.len = 3},
+	};
+	if (dvb_usb_opera1_debug)
+		info("pidfilter index: %d pid: %d %s", index, pid,
+			onoff ? "on" : "off");
+	b_pid[0] = (2 * index) + 4;
+	b_pid[1] = onoff ? (pid & 0xff) : (0x00);
+	b_pid[2] = onoff ? ((pid >> 8) & 0xff) : (0x00);
+	i2c_transfer(&adap->dev->i2c_adap, msg, 1);
+	return 0;
+}
+
+static int opera1_pid_filter_control(struct dvb_usb_adapter *adap, int onoff)
+{
+	int u = 0x04;
+	u8 b_pid[3];
+	struct i2c_msg msg[] = {
+		{.addr = ADDR_B1A6_STREAM_CTRL,.buf = b_pid,.len = 3},
+	};
+	if (dvb_usb_opera1_debug)
+		info("%s hw-pidfilter", onoff ? "enable" : "disable");
+	for (; u < 0x7e; u += 2) {
+		b_pid[0] = u;
+		b_pid[1] = 0;
+		b_pid[2] = 0x80;
+		i2c_transfer(&adap->dev->i2c_adap, msg, 1);
+	}
+	return 0;
+}
+
+static struct rc_map_table rc_map_opera1_table[] = {
+	{0x5fa0, KEY_1},
+	{0x51af, KEY_2},
+	{0x5da2, KEY_3},
+	{0x41be, KEY_4},
+	{0x0bf5, KEY_5},
+	{0x43bd, KEY_6},
+	{0x47b8, KEY_7},
+	{0x49b6, KEY_8},
+	{0x05fa, KEY_9},
+	{0x45ba, KEY_0},
+	{0x09f6, KEY_CHANNELUP},	/*chanup */
+	{0x1be5, KEY_CHANNELDOWN},	/*chandown */
+	{0x5da3, KEY_VOLUMEDOWN},	/*voldown */
+	{0x5fa1, KEY_VOLUMEUP},		/*volup */
+	{0x07f8, KEY_SPACE},		/*tab */
+	{0x1fe1, KEY_OK},		/*play ok */
+	{0x1be4, KEY_ZOOM},		/*zoom */
+	{0x59a6, KEY_MUTE},		/*mute */
+	{0x5ba5, KEY_RADIO},		/*tv/f */
+	{0x19e7, KEY_RECORD},		/*rec */
+	{0x01fe, KEY_STOP},		/*Stop */
+	{0x03fd, KEY_PAUSE},		/*pause */
+	{0x03fc, KEY_SCREEN},		/*<- -> */
+	{0x07f9, KEY_CAMERA},		/*capture */
+	{0x47b9, KEY_ESC},		/*exit */
+	{0x43bc, KEY_POWER2},		/*power */
+};
+
+static int opera1_rc_query(struct dvb_usb_device *dev, u32 * event, int *state)
+{
+	struct opera1_state *opst = dev->priv;
+	u8 rcbuffer[32];
+	const u16 startmarker1 = 0x10ed;
+	const u16 startmarker2 = 0x11ec;
+	struct i2c_msg read_remote[] = {
+		{.addr = ADDR_B880_READ_REMOTE,.buf = rcbuffer,.flags = I2C_M_RD,.len = 32},
+	};
+	int i = 0;
+	u32 send_key = 0;
+
+	if (i2c_transfer(&dev->i2c_adap, read_remote, 1) == 1) {
+		for (i = 0; i < 32; i++) {
+			if (rcbuffer[i])
+				send_key |= 1;
+			if (i < 31)
+				send_key = send_key << 1;
+		}
+		if (send_key & 0x8000)
+			send_key = (send_key << 1) | (send_key >> 15 & 0x01);
+
+		if (send_key == 0xffff && opst->last_key_pressed != 0) {
+			*state = REMOTE_KEY_REPEAT;
+			*event = opst->last_key_pressed;
+			return 0;
+		}
+		for (; send_key != 0;) {
+			if (send_key >> 16 == startmarker2) {
+				break;
+			} else if (send_key >> 16 == startmarker1) {
+				send_key =
+					(send_key & 0xfffeffff) | (startmarker1 << 16);
+				break;
+			} else
+				send_key >>= 1;
+		}
+
+		if (send_key == 0)
+			return 0;
+
+		send_key = (send_key & 0xffff) | 0x0100;
+
+		for (i = 0; i < ARRAY_SIZE(rc_map_opera1_table); i++) {
+			if (rc5_scan(&rc_map_opera1_table[i]) == (send_key & 0xffff)) {
+				*state = REMOTE_KEY_PRESSED;
+				*event = rc_map_opera1_table[i].keycode;
+				opst->last_key_pressed =
+					rc_map_opera1_table[i].keycode;
+				break;
+			}
+			opst->last_key_pressed = 0;
+		}
+	} else
+		*state = REMOTE_NO_KEY_PRESSED;
+	return 0;
+}
+
+enum {
+	CYPRESS_OPERA1_COLD,
+	OPERA1_WARM,
+};
+
+static struct usb_device_id opera1_table[] = {
+	DVB_USB_DEV(CYPRESS, CYPRESS_OPERA1_COLD),
+	DVB_USB_DEV(OPERA1, OPERA1_WARM),
+	{ }
+};
+
+MODULE_DEVICE_TABLE(usb, opera1_table);
+
+static int opera1_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
+{
+	u8 command[] = { READ_MAC_ADDR };
+	opera1_xilinx_rw(d->udev, 0xb1, 0xa0, command, 1, OPERA_WRITE_MSG);
+	opera1_xilinx_rw(d->udev, 0xb1, 0xa1, mac, 6, OPERA_READ_MSG);
+	return 0;
+}
+static int opera1_xilinx_load_firmware(struct usb_device *dev,
+				       const char *filename)
+{
+	const struct firmware *fw = NULL;
+	u8 *b, *p;
+	int ret = 0, i,fpgasize=40;
+	u8 testval;
+	info("start downloading fpga firmware %s",filename);
+
+	if ((ret = request_firmware(&fw, filename, &dev->dev)) != 0) {
+		err("did not find the firmware file '%s'. You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware",
+			filename);
+		return ret;
+	} else {
+		p = kmalloc(fw->size, GFP_KERNEL);
+		opera1_xilinx_rw(dev, 0xbc, 0x00, &testval, 1, OPERA_READ_MSG);
+		if (p != NULL && testval != 0x67) {
+
+			u8 reset = 0, fpga_command = 0;
+			memcpy(p, fw->data, fw->size);
+			/* clear fpga ? */
+			opera1_xilinx_rw(dev, 0xbc, 0xaa, &fpga_command, 1,
+					 OPERA_WRITE_MSG);
+			for (i = 0; i < fw->size;) {
+				if ( (fw->size - i) <fpgasize){
+				    fpgasize=fw->size-i;
+				}
+				b = (u8 *) p + i;
+				if (opera1_xilinx_rw
+					(dev, OPERA_WRITE_FX2, 0x0, b , fpgasize,
+						OPERA_WRITE_MSG) != fpgasize
+					) {
+					err("error while transferring firmware");
+					ret = -EINVAL;
+					break;
+				}
+				i = i + fpgasize;
+			}
+			/* restart the CPU */
+			if (ret || opera1_xilinx_rw
+					(dev, 0xa0, 0xe600, &reset, 1,
+					OPERA_WRITE_MSG) != 1) {
+				err("could not restart the USB controller CPU.");
+				ret = -EINVAL;
+			}
+		}
+	}
+	kfree(p);
+	release_firmware(fw);
+	return ret;
+}
+
+static struct dvb_usb_device_properties opera1_properties = {
+	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+	.usb_ctrl = CYPRESS_FX2,
+	.firmware = "dvb-usb-opera-01.fw",
+	.size_of_priv = sizeof(struct opera1_state),
+
+	.power_ctrl = opera1_power_ctrl,
+	.i2c_algo = &opera1_i2c_algo,
+
+	.rc.legacy = {
+		.rc_map_table = rc_map_opera1_table,
+		.rc_map_size = ARRAY_SIZE(rc_map_opera1_table),
+		.rc_interval = 200,
+		.rc_query = opera1_rc_query,
+	},
+	.read_mac_address = opera1_read_mac_address,
+	.generic_bulk_ctrl_endpoint = 0x00,
+	/* parameter for the MPEG2-data transfer */
+	.num_adapters = 1,
+	.adapter = {
+		{
+		.num_frontends = 1,
+		.fe = {{
+			.frontend_attach = opera1_frontend_attach,
+			.streaming_ctrl = opera1_streaming_ctrl,
+			.tuner_attach = opera1_tuner_attach,
+			.caps =
+				DVB_USB_ADAP_HAS_PID_FILTER |
+				DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+			.pid_filter = opera1_pid_filter,
+			.pid_filter_ctrl = opera1_pid_filter_control,
+			.pid_filter_count = 252,
+			.stream = {
+				.type = USB_BULK,
+				.count = 10,
+				.endpoint = 0x82,
+				.u = {
+					.bulk = {
+						.buffersize = 4096,
+					}
+				}
+			},
+		}},
+		}
+	},
+	.num_device_descs = 1,
+	.devices = {
+		{"Opera1 DVB-S USB2.0",
+			{&opera1_table[CYPRESS_OPERA1_COLD], NULL},
+			{&opera1_table[OPERA1_WARM], NULL},
+		},
+	}
+};
+
+static int opera1_probe(struct usb_interface *intf,
+			const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+
+	if (le16_to_cpu(udev->descriptor.idProduct) == USB_PID_OPERA1_WARM &&
+	    le16_to_cpu(udev->descriptor.idVendor) == USB_VID_OPERA1 &&
+		opera1_xilinx_load_firmware(udev, "dvb-usb-opera1-fpga-01.fw") != 0
+	    ) {
+		return -EINVAL;
+	}
+
+	if (0 != dvb_usb_device_init(intf, &opera1_properties,
+				     THIS_MODULE, NULL, adapter_nr))
+		return -EINVAL;
+	return 0;
+}
+
+static struct usb_driver opera1_driver = {
+	.name = "opera1",
+	.probe = opera1_probe,
+	.disconnect = dvb_usb_device_exit,
+	.id_table = opera1_table,
+};
+
+module_usb_driver(opera1_driver);
+
+MODULE_AUTHOR("Mario Hlawitschka (c) dh1pa@amsat.org");
+MODULE_AUTHOR("Marco Gittler (c) g.marco@freenet.de");
+MODULE_DESCRIPTION("Driver for Opera1 DVB-S device");
+MODULE_VERSION("0.1");
+MODULE_LICENSE("GPL");