Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 256 insertions, 0 deletions

diff --git a/drivers/media/usb/dvb-usb/vp7045.c b/drivers/media/usb/dvb-usb/vp7045.c
new file mode 100644
index 000000000..1dc2b18d4
--- /dev/null
+++ b/drivers/media/usb/dvb-usb/vp7045.c
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* DVB USB compliant Linux driver for the
+ *  - TwinhanDTV Alpha/MagicBoxII USB2.0 DVB-T receiver
+ *  - DigitalNow TinyUSB2 DVB-t receiver
+ *
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@posteo.de)
+ *
+ * Thanks to Twinhan who kindly provided hardware and information.
+ *
+ * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information
+ */
+#include "vp7045.h"
+
+/* debug */
+static int dvb_usb_vp7045_debug;
+module_param_named(debug,dvb_usb_vp7045_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS);
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+#define deb_info(args...) dprintk(dvb_usb_vp7045_debug,0x01,args)
+#define deb_xfer(args...) dprintk(dvb_usb_vp7045_debug,0x02,args)
+#define deb_rc(args...)   dprintk(dvb_usb_vp7045_debug,0x04,args)
+
+int vp7045_usb_op(struct dvb_usb_device *d, u8 cmd, u8 *out, int outlen, u8 *in, int inlen, int msec)
+{
+	int ret = 0;
+	u8 *buf = d->priv;
+
+	buf[0] = cmd;
+
+	if (outlen > 19)
+		outlen = 19;
+
+	if (inlen > 11)
+		inlen = 11;
+
+	ret = mutex_lock_interruptible(&d->usb_mutex);
+	if (ret)
+		return ret;
+
+	if (out != NULL && outlen > 0)
+		memcpy(&buf[1], out, outlen);
+
+	deb_xfer("out buffer: ");
+	debug_dump(buf, outlen+1, deb_xfer);
+
+
+	if (usb_control_msg(d->udev,
+			usb_sndctrlpipe(d->udev,0),
+			TH_COMMAND_OUT, USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0,
+			buf, 20, 2000) != 20) {
+		err("USB control message 'out' went wrong.");
+		ret = -EIO;
+		goto unlock;
+	}
+
+	msleep(msec);
+
+	if (usb_control_msg(d->udev,
+			usb_rcvctrlpipe(d->udev,0),
+			TH_COMMAND_IN, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
+			buf, 12, 2000) != 12) {
+		err("USB control message 'in' went wrong.");
+		ret = -EIO;
+		goto unlock;
+	}
+
+	deb_xfer("in buffer: ");
+	debug_dump(buf, 12, deb_xfer);
+
+	if (in != NULL && inlen > 0)
+		memcpy(in, &buf[1], inlen);
+
+unlock:
+	mutex_unlock(&d->usb_mutex);
+
+	return ret;
+}
+
+u8 vp7045_read_reg(struct dvb_usb_device *d, u8 reg)
+{
+	u8 obuf[2] = { 0 },v;
+	obuf[1] = reg;
+
+	vp7045_usb_op(d,TUNER_REG_READ,obuf,2,&v,1,30);
+
+	return v;
+}
+
+static int vp7045_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+	u8 v = onoff;
+	return vp7045_usb_op(d,SET_TUNER_POWER,&v,1,NULL,0,150);
+}
+
+static int vp7045_rc_query(struct dvb_usb_device *d)
+{
+	int ret;
+	u8 key;
+
+	ret = vp7045_usb_op(d, RC_VAL_READ, NULL, 0, &key, 1, 20);
+	if (ret)
+		return ret;
+
+	deb_rc("remote query key: %x\n", key);
+
+	if (key != 0x44) {
+		/*
+		 * The 8 bit address isn't available, but since the remote uses
+		 * address 0 we'll use that. nec repeats are ignored too, even
+		 * though the remote sends them.
+		 */
+		rc_keydown(d->rc_dev, RC_PROTO_NEC, RC_SCANCODE_NEC(0, key), 0);
+	}
+
+	return 0;
+}
+
+static int vp7045_read_eeprom(struct dvb_usb_device *d,u8 *buf, int len, int offset)
+{
+	int i, ret;
+	u8 v, br[2];
+	for (i=0; i < len; i++) {
+		v = offset + i;
+		ret = vp7045_usb_op(d, GET_EE_VALUE, &v, 1, br, 2, 5);
+		if (ret)
+			return ret;
+
+		buf[i] = br[1];
+	}
+	deb_info("VP7045 EEPROM read (offs: %d, len: %d) : ", offset, i);
+	debug_dump(buf, i, deb_info);
+	return 0;
+}
+
+static int vp7045_read_mac_addr(struct dvb_usb_device *d,u8 mac[6])
+{
+	return vp7045_read_eeprom(d,mac, 6, MAC_0_ADDR);
+}
+
+static int vp7045_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	u8 buf[255] = { 0 };
+
+	vp7045_usb_op(adap->dev,VENDOR_STRING_READ,NULL,0,buf,20,0);
+	buf[10] = '\0';
+	deb_info("firmware says: %s ",buf);
+
+	vp7045_usb_op(adap->dev,PRODUCT_STRING_READ,NULL,0,buf,20,0);
+	buf[10] = '\0';
+	deb_info("%s ",buf);
+
+	vp7045_usb_op(adap->dev,FW_VERSION_READ,NULL,0,buf,20,0);
+	buf[10] = '\0';
+	deb_info("v%s\n",buf);
+
+/*	Dump the EEPROM */
+/*	vp7045_read_eeprom(d,buf, 255, FX2_ID_ADDR); */
+
+	adap->fe_adap[0].fe = vp7045_fe_attach(adap->dev);
+
+	return 0;
+}
+
+static struct dvb_usb_device_properties vp7045_properties;
+
+static int vp7045_usb_probe(struct usb_interface *intf,
+		const struct usb_device_id *id)
+{
+	return dvb_usb_device_init(intf, &vp7045_properties,
+				   THIS_MODULE, NULL, adapter_nr);
+}
+
+enum {
+	VISIONPLUS_VP7045_COLD,
+	VISIONPLUS_VP7045_WARM,
+	VISIONPLUS_TINYUSB2_COLD,
+	VISIONPLUS_TINYUSB2_WARM,
+};
+
+static struct usb_device_id vp7045_usb_table[] = {
+	DVB_USB_DEV(VISIONPLUS, VISIONPLUS_VP7045_COLD),
+	DVB_USB_DEV(VISIONPLUS, VISIONPLUS_VP7045_WARM),
+	DVB_USB_DEV(VISIONPLUS, VISIONPLUS_TINYUSB2_COLD),
+	DVB_USB_DEV(VISIONPLUS, VISIONPLUS_TINYUSB2_WARM),
+	{ }
+};
+
+MODULE_DEVICE_TABLE(usb, vp7045_usb_table);
+
+static struct dvb_usb_device_properties vp7045_properties = {
+	.usb_ctrl = CYPRESS_FX2,
+	.firmware = "dvb-usb-vp7045-01.fw",
+	.size_of_priv = 20,
+
+	.num_adapters = 1,
+	.adapter = {
+		{
+		.num_frontends = 1,
+		.fe = {{
+			.frontend_attach  = vp7045_frontend_attach,
+			/* parameter for the MPEG2-data transfer */
+			.stream = {
+				.type = USB_BULK,
+				.count = 7,
+				.endpoint = 0x02,
+				.u = {
+					.bulk = {
+						.buffersize = 4096,
+					}
+				}
+			},
+		}},
+		}
+	},
+	.power_ctrl       = vp7045_power_ctrl,
+	.read_mac_address = vp7045_read_mac_addr,
+
+	.rc.core = {
+		.rc_interval	= 400,
+		.rc_codes	= RC_MAP_TWINHAN_VP1027_DVBS,
+		.module_name    = KBUILD_MODNAME,
+		.rc_query	= vp7045_rc_query,
+		.allowed_protos = RC_PROTO_BIT_NEC,
+		.scancode_mask	= 0xff,
+	},
+
+	.num_device_descs = 2,
+	.devices = {
+		{ .name = "Twinhan USB2.0 DVB-T receiver (TwinhanDTV Alpha/MagicBox II)",
+		  .cold_ids = { &vp7045_usb_table[VISIONPLUS_VP7045_COLD], NULL },
+		  .warm_ids = { &vp7045_usb_table[VISIONPLUS_VP7045_WARM], NULL },
+		},
+		{ .name = "DigitalNow TinyUSB 2 DVB-t Receiver",
+		  .cold_ids = { &vp7045_usb_table[VISIONPLUS_TINYUSB2_COLD], NULL },
+		  .warm_ids = { &vp7045_usb_table[VISIONPLUS_TINYUSB2_WARM], NULL },
+		},
+		{ NULL },
+	}
+};
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver vp7045_usb_driver = {
+	.name		= "dvb_usb_vp7045",
+	.probe		= vp7045_usb_probe,
+	.disconnect	= dvb_usb_device_exit,
+	.id_table	= vp7045_usb_table,
+};
+
+module_usb_driver(vp7045_usb_driver);
+
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
+MODULE_DESCRIPTION("Driver for Twinhan MagicBox/Alpha and DNTV tinyUSB2 DVB-T USB2.0");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL");