Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 301 insertions, 0 deletions

diff --git a/drivers/media/usb/em28xx/em28xx-reg.h b/drivers/media/usb/em28xx/em28xx-reg.h
new file mode 100644
index 000000000..d7c608628
--- /dev/null
+++ b/drivers/media/usb/em28xx/em28xx-reg.h
@@ -0,0 +1,301 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/*
+ * em28xx-reg.h - Register definitions for em28xx driver
+ */
+
+#define EM_GPIO_0  ((unsigned char)BIT(0))
+#define EM_GPIO_1  ((unsigned char)BIT(1))
+#define EM_GPIO_2  ((unsigned char)BIT(2))
+#define EM_GPIO_3  ((unsigned char)BIT(3))
+#define EM_GPIO_4  ((unsigned char)BIT(4))
+#define EM_GPIO_5  ((unsigned char)BIT(5))
+#define EM_GPIO_6  ((unsigned char)BIT(6))
+#define EM_GPIO_7  ((unsigned char)BIT(7))
+
+#define EM_GPO_0   ((unsigned char)BIT(0))
+#define EM_GPO_1   ((unsigned char)BIT(1))
+#define EM_GPO_2   ((unsigned char)BIT(2))
+#define EM_GPO_3   ((unsigned char)BIT(3))
+
+/* em28xx endpoints */
+/* 0x82:   (always ?) analog */
+#define EM28XX_EP_AUDIO		0x83
+/* 0x84:   digital or analog */
+
+/* em2800 registers */
+#define EM2800_R08_AUDIOSRC 0x08
+
+/* em28xx registers */
+
+#define EM28XX_R00_CHIPCFG	0x00
+
+/* em28xx Chip Configuration 0x00 */
+#define EM2860_CHIPCFG_VENDOR_AUDIO		0x80
+#define EM2860_CHIPCFG_I2S_VOLUME_CAPABLE	0x40
+#define EM2820_CHIPCFG_I2S_3_SAMPRATES		0x30
+#define EM2860_CHIPCFG_I2S_5_SAMPRATES		0x30
+#define EM2820_CHIPCFG_I2S_1_SAMPRATE		0x20
+#define EM2860_CHIPCFG_I2S_3_SAMPRATES		0x20
+#define EM28XX_CHIPCFG_AC97			0x10
+#define EM28XX_CHIPCFG_AUDIOMASK		0x30
+
+#define EM28XX_R01_CHIPCFG2	0x01
+
+/* em28xx Chip Configuration 2 0x01 */
+#define EM28XX_CHIPCFG2_TS_PRESENT		0x10
+#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_MASK	0x0c /* bits 3-2 */
+#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_1MF	0x00
+#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_2MF	0x04
+#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_4MF	0x08
+#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_8MF	0x0c
+#define EM28XX_CHIPCFG2_TS_PACKETSIZE_MASK	0x03 /* bits 0-1 */
+#define EM28XX_CHIPCFG2_TS_PACKETSIZE_188	0x00
+#define EM28XX_CHIPCFG2_TS_PACKETSIZE_376	0x01
+#define EM28XX_CHIPCFG2_TS_PACKETSIZE_564	0x02
+#define EM28XX_CHIPCFG2_TS_PACKETSIZE_752	0x03
+
+/* GPIO/GPO registers */
+#define EM2880_R04_GPO		0x04    /* em2880-em2883 only */
+#define EM2820_R08_GPIO_CTRL	0x08	/* em2820-em2873/83 only */
+#define EM2820_R09_GPIO_STATE	0x09	/* em2820-em2873/83 only */
+
+#define EM28XX_R06_I2C_CLK	0x06
+
+/* em28xx I2C Clock Register (0x06) */
+#define EM28XX_I2C_CLK_ACK_LAST_READ	0x80
+#define EM28XX_I2C_CLK_WAIT_ENABLE	0x40
+#define EM28XX_I2C_EEPROM_ON_BOARD	0x08
+#define EM28XX_I2C_EEPROM_KEY_VALID	0x04
+#define EM2874_I2C_SECONDARY_BUS_SELECT	0x04 /* em2874 has two i2c buses */
+#define EM28XX_I2C_FREQ_1_5_MHZ		0x03 /* bus frequency (bits [1-0]) */
+#define EM28XX_I2C_FREQ_25_KHZ		0x02
+#define EM28XX_I2C_FREQ_400_KHZ		0x01
+#define EM28XX_I2C_FREQ_100_KHZ		0x00
+
+#define EM28XX_R0A_CHIPID	0x0a
+#define EM28XX_R0C_USBSUSP	0x0c
+#define   EM28XX_R0C_USBSUSP_SNAPSHOT	0x20 /* 1=button pressed, needs reset */
+
+#define EM28XX_R0E_AUDIOSRC	0x0e
+#define EM28XX_R0F_XCLK	0x0f
+
+/* em28xx XCLK Register (0x0f) */
+#define EM28XX_XCLK_AUDIO_UNMUTE	0x80 /* otherwise audio muted */
+#define EM28XX_XCLK_I2S_MSB_TIMING	0x40 /* otherwise standard timing */
+#define EM28XX_XCLK_IR_RC5_MODE		0x20 /* otherwise NEC mode */
+#define EM28XX_XCLK_IR_NEC_CHK_PARITY	0x10
+#define EM28XX_XCLK_FREQUENCY_30MHZ	0x00 /* Freq. select (bits [3-0]) */
+#define EM28XX_XCLK_FREQUENCY_15MHZ	0x01
+#define EM28XX_XCLK_FREQUENCY_10MHZ	0x02
+#define EM28XX_XCLK_FREQUENCY_7_5MHZ	0x03
+#define EM28XX_XCLK_FREQUENCY_6MHZ	0x04
+#define EM28XX_XCLK_FREQUENCY_5MHZ	0x05
+#define EM28XX_XCLK_FREQUENCY_4_3MHZ	0x06
+#define EM28XX_XCLK_FREQUENCY_12MHZ	0x07
+#define EM28XX_XCLK_FREQUENCY_20MHZ	0x08
+#define EM28XX_XCLK_FREQUENCY_20MHZ_2	0x09
+#define EM28XX_XCLK_FREQUENCY_48MHZ	0x0a
+#define EM28XX_XCLK_FREQUENCY_24MHZ	0x0b
+
+#define EM28XX_R10_VINMODE	0x10
+	  /* used by all non-camera devices: */
+#define   EM28XX_VINMODE_YUV422_CbYCrY  0x10
+	  /* used by camera devices: */
+#define   EM28XX_VINMODE_YUV422_YUYV    0x08
+#define   EM28XX_VINMODE_YUV422_YVYU    0x09
+#define   EM28XX_VINMODE_YUV422_UYVY    0x0a
+#define   EM28XX_VINMODE_YUV422_VYUY    0x0b
+#define   EM28XX_VINMODE_RGB8_BGGR      0x0c
+#define   EM28XX_VINMODE_RGB8_GRBG      0x0d
+#define   EM28XX_VINMODE_RGB8_GBRG      0x0e
+#define   EM28XX_VINMODE_RGB8_RGGB      0x0f
+	  /*
+	   * apparently:
+	   *   bit 0: swap component 1+2 with 3+4
+	   *                 => e.g.: YUYV => YVYU, BGGR => GRBG
+	   *   bit 1: swap component 1 with 2 and 3 with 4
+	   *                 => e.g.: YUYV => UYVY, BGGR => GBRG
+	   */
+
+#define EM28XX_R11_VINCTRL	0x11
+
+/* em28xx Video Input Control Register 0x11 */
+#define EM28XX_VINCTRL_VBI_SLICED	0x80
+#define EM28XX_VINCTRL_VBI_RAW		0x40
+#define EM28XX_VINCTRL_VOUT_MODE_IN	0x20 /* HREF,VREF,VACT in output */
+#define EM28XX_VINCTRL_CCIR656_ENABLE	0x10
+#define EM28XX_VINCTRL_VBI_16BIT_RAW	0x08 /* otherwise 8-bit raw */
+#define EM28XX_VINCTRL_FID_ON_HREF	0x04
+#define EM28XX_VINCTRL_DUAL_EDGE_STROBE	0x02
+#define EM28XX_VINCTRL_INTERLACED	0x01
+
+#define EM28XX_R12_VINENABLE	0x12	/* */
+
+#define EM28XX_R14_GAMMA	0x14
+#define EM28XX_R15_RGAIN	0x15
+#define EM28XX_R16_GGAIN	0x16
+#define EM28XX_R17_BGAIN	0x17
+#define EM28XX_R18_ROFFSET	0x18
+#define EM28XX_R19_GOFFSET	0x19
+#define EM28XX_R1A_BOFFSET	0x1a
+
+#define EM28XX_R1B_OFLOW	0x1b
+#define EM28XX_R1C_HSTART	0x1c
+#define EM28XX_R1D_VSTART	0x1d
+#define EM28XX_R1E_CWIDTH	0x1e
+#define EM28XX_R1F_CHEIGHT	0x1f
+
+#define EM28XX_R20_YGAIN	0x20 /* contrast [0:4]   */
+#define   CONTRAST_DEFAULT	0x10
+
+#define EM28XX_R21_YOFFSET	0x21 /* brightness       */	/* signed */
+#define   BRIGHTNESS_DEFAULT	0x00
+
+#define EM28XX_R22_UVGAIN	0x22 /* saturation [0:4] */
+#define   SATURATION_DEFAULT	0x10
+
+#define EM28XX_R23_UOFFSET	0x23 /* blue balance     */	/* signed */
+#define   BLUE_BALANCE_DEFAULT	0x00
+
+#define EM28XX_R24_VOFFSET	0x24 /* red balance      */	/* signed */
+#define   RED_BALANCE_DEFAULT	0x00
+
+#define EM28XX_R25_SHARPNESS	0x25 /* sharpness [0:4]  */
+#define   SHARPNESS_DEFAULT	0x00
+
+#define EM28XX_R26_COMPR	0x26
+#define EM28XX_R27_OUTFMT	0x27
+
+/* em28xx Output Format Register (0x27) */
+#define EM28XX_OUTFMT_RGB_8_RGRG	0x00
+#define EM28XX_OUTFMT_RGB_8_GRGR	0x01
+#define EM28XX_OUTFMT_RGB_8_GBGB	0x02
+#define EM28XX_OUTFMT_RGB_8_BGBG	0x03
+#define EM28XX_OUTFMT_RGB_16_656	0x04
+#define EM28XX_OUTFMT_RGB_8_BAYER	0x08 /* Pattern in Reg 0x10[1-0] */
+#define EM28XX_OUTFMT_YUV211		0x10
+#define EM28XX_OUTFMT_YUV422_Y0UY1V	0x14
+#define EM28XX_OUTFMT_YUV422_Y1UY0V	0x15
+#define EM28XX_OUTFMT_YUV411		0x18
+
+#define EM28XX_R28_XMIN	0x28
+#define EM28XX_R29_XMAX	0x29
+#define EM28XX_R2A_YMIN	0x2a
+#define EM28XX_R2B_YMAX	0x2b
+
+#define EM28XX_R30_HSCALELOW	0x30
+#define EM28XX_R31_HSCALEHIGH	0x31
+#define EM28XX_R32_VSCALELOW	0x32
+#define EM28XX_R33_VSCALEHIGH	0x33
+#define   EM28XX_HVSCALE_MAX	0x3fff /* => 20% */
+
+#define EM28XX_R34_VBI_START_H	0x34
+#define EM28XX_R35_VBI_START_V	0x35
+/*
+ * NOTE: the EM276x (and EM25xx, EM277x/8x ?) (camera bridges) use these
+ * registers for a different unknown purpose.
+ *   => register 0x34 is set to capture width / 16
+ *   => register 0x35 is set to capture height / 16
+ */
+
+#define EM28XX_R36_VBI_WIDTH	0x36
+#define EM28XX_R37_VBI_HEIGHT	0x37
+
+#define EM28XX_R40_AC97LSB	0x40
+#define EM28XX_R41_AC97MSB	0x41
+#define EM28XX_R42_AC97ADDR	0x42
+#define EM28XX_R43_AC97BUSY	0x43
+
+#define EM28XX_R45_IR		0x45
+	/*
+	 * 0x45  bit 7    - parity bit
+	 *	 bits 6-0 - count
+	 * 0x46  IR brand
+	 *  0x47  IR data
+	 */
+
+/* em2874 registers */
+#define EM2874_R50_IR_CONFIG    0x50
+#define EM2874_R51_IR           0x51
+#define EM2874_R5D_TS1_PKT_SIZE 0x5d
+#define EM2874_R5E_TS2_PKT_SIZE 0x5e
+	/*
+	 * For both TS1 and TS2, In isochronous mode:
+	 *  0x01  188 bytes
+	 *  0x02  376 bytes
+	 *  0x03  564 bytes
+	 *  0x04  752 bytes
+	 *  0x05  940 bytes
+	 * In bulk mode:
+	 *  0x01..0xff  total packet count in 188-byte
+	 */
+
+#define EM2874_R5F_TS_ENABLE    0x5f
+
+/* em2874/174/84, em25xx, em276x/7x/8x GPIO registers */
+/*
+ * NOTE: not all ports are bonded out;
+ * Some ports are multiplexed with special function I/O
+ */
+#define EM2874_R80_GPIO_P0_CTRL    0x80
+#define EM2874_R81_GPIO_P1_CTRL    0x81
+#define EM2874_R82_GPIO_P2_CTRL    0x82
+#define EM2874_R83_GPIO_P3_CTRL    0x83
+#define EM2874_R84_GPIO_P0_STATE   0x84
+#define EM2874_R85_GPIO_P1_STATE   0x85
+#define EM2874_R86_GPIO_P2_STATE   0x86
+#define EM2874_R87_GPIO_P3_STATE   0x87
+
+/* em2874 IR config register (0x50) */
+#define EM2874_IR_NEC           0x00
+#define EM2874_IR_NEC_NO_PARITY 0x01
+#define EM2874_IR_RC5           0x04
+#define EM2874_IR_RC6_MODE_0    0x08
+#define EM2874_IR_RC6_MODE_6A   0x0b
+
+/* em2874 Transport Stream Enable Register (0x5f) */
+#define EM2874_TS1_CAPTURE_ENABLE ((unsigned char)BIT(0))
+#define EM2874_TS1_FILTER_ENABLE  ((unsigned char)BIT(1))
+#define EM2874_TS1_NULL_DISCARD   ((unsigned char)BIT(2))
+#define EM2874_TS2_CAPTURE_ENABLE ((unsigned char)BIT(4))
+#define EM2874_TS2_FILTER_ENABLE  ((unsigned char)BIT(5))
+#define EM2874_TS2_NULL_DISCARD   ((unsigned char)BIT(6))
+
+/* register settings */
+#define EM2800_AUDIO_SRC_TUNER  0x0d
+#define EM2800_AUDIO_SRC_LINE   0x0c
+#define EM28XX_AUDIO_SRC_TUNER	0xc0
+#define EM28XX_AUDIO_SRC_LINE	0x80
+
+/* FIXME: Need to be populated with the other chip ID's */
+enum em28xx_chip_id {
+	CHIP_ID_EM2800 = 7,
+	CHIP_ID_EM2710 = 17,
+	CHIP_ID_EM2820 = 18,	/* Also used by some em2710 */
+	CHIP_ID_EM2840 = 20,
+	CHIP_ID_EM2750 = 33,
+	CHIP_ID_EM2860 = 34,
+	CHIP_ID_EM2870 = 35,
+	CHIP_ID_EM2883 = 36,
+	CHIP_ID_EM2765 = 54,
+	CHIP_ID_EM2874 = 65,
+	CHIP_ID_EM2884 = 68,
+	CHIP_ID_EM28174 = 113,
+	CHIP_ID_EM28178 = 114,
+};
+
+/*
+ * Registers used by em202
+ */
+
+/* EMP202 vendor registers */
+#define EM202_EXT_MODEM_CTRL     0x3e
+#define EM202_GPIO_CONF          0x4c
+#define EM202_GPIO_POLARITY      0x4e
+#define EM202_GPIO_STICKY        0x50
+#define EM202_GPIO_MASK          0x52
+#define EM202_GPIO_STATUS        0x54
+#define EM202_SPDIF_OUT_SEL      0x6a
+#define EM202_ANTIPOP            0x72
+#define EM202_EAPD_GPIO_ACCESS   0x74