Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 293 insertions, 0 deletions

diff --git a/drivers/media/usb/gspca/finepix.c b/drivers/media/usb/gspca/finepix.c
new file mode 100644
index 000000000..bc6133b52
--- /dev/null
+++ b/drivers/media/usb/gspca/finepix.c
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Fujifilm Finepix subdriver
+ *
+ * Copyright (C) 2008 Frank Zago
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define MODULE_NAME "finepix"
+
+#include "gspca.h"
+
+MODULE_AUTHOR("Frank Zago <frank@zago.net>");
+MODULE_DESCRIPTION("Fujifilm FinePix USB V4L2 driver");
+MODULE_LICENSE("GPL");
+
+/* Default timeout, in ms */
+#define FPIX_TIMEOUT 250
+
+/* Maximum transfer size to use. The windows driver reads by chunks of
+ * 0x2000 bytes, so do the same. Note: reading more seems to work
+ * too. */
+#define FPIX_MAX_TRANSFER 0x2000
+
+/* Structure to hold all of our device specific stuff */
+struct usb_fpix {
+	struct gspca_dev gspca_dev;	/* !! must be the first item */
+
+	struct work_struct work_struct;
+};
+
+/* Delay after which claim the next frame. If the delay is too small,
+ * the camera will return old frames. On the 4800Z, 20ms is bad, 25ms
+ * will fail every 4 or 5 frames, but 30ms is perfect. On the A210,
+ * 30ms is bad while 35ms is perfect. */
+#define NEXT_FRAME_DELAY 35
+
+/* These cameras only support 320x200. */
+static const struct v4l2_pix_format fpix_mode[1] = {
+	{ 320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240 * 3 / 8 + 590,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 0}
+};
+
+/* send a command to the webcam */
+static int command(struct gspca_dev *gspca_dev,
+		int order)	/* 0: reset, 1: frame request */
+{
+	static u8 order_values[2][12] = {
+		{0xc6, 0, 0, 0, 0, 0, 0,    0, 0x20, 0, 0, 0},	/* reset */
+		{0xd3, 0, 0, 0, 0, 0, 0, 0x01,    0, 0, 0, 0},	/* fr req */
+	};
+
+	memcpy(gspca_dev->usb_buf, order_values[order], 12);
+	return usb_control_msg(gspca_dev->dev,
+			usb_sndctrlpipe(gspca_dev->dev, 0),
+			USB_REQ_GET_STATUS,
+			USB_DIR_OUT | USB_TYPE_CLASS |
+			USB_RECIP_INTERFACE, 0, 0, gspca_dev->usb_buf,
+			12, FPIX_TIMEOUT);
+}
+
+/*
+ * This function is called as a workqueue function and runs whenever the camera
+ * is streaming data. Because it is a workqueue function it is allowed to sleep
+ * so we can use synchronous USB calls. To avoid possible collisions with other
+ * threads attempting to use gspca_dev->usb_buf we take the usb_lock when
+ * performing USB operations using it. In practice we don't really need this
+ * as the camera doesn't provide any controls.
+ */
+static void dostream(struct work_struct *work)
+{
+	struct usb_fpix *dev = container_of(work, struct usb_fpix, work_struct);
+	struct gspca_dev *gspca_dev = &dev->gspca_dev;
+	struct urb *urb = gspca_dev->urb[0];
+	u8 *data = urb->transfer_buffer;
+	int ret = 0;
+	int len;
+
+	gspca_dbg(gspca_dev, D_STREAM, "dostream started\n");
+
+	/* loop reading a frame */
+again:
+	while (gspca_dev->present && gspca_dev->streaming) {
+#ifdef CONFIG_PM
+		if (gspca_dev->frozen)
+			break;
+#endif
+
+		/* request a frame */
+		mutex_lock(&gspca_dev->usb_lock);
+		ret = command(gspca_dev, 1);
+		mutex_unlock(&gspca_dev->usb_lock);
+		if (ret < 0)
+			break;
+#ifdef CONFIG_PM
+		if (gspca_dev->frozen)
+			break;
+#endif
+		if (!gspca_dev->present || !gspca_dev->streaming)
+			break;
+
+		/* the frame comes in parts */
+		for (;;) {
+			ret = usb_bulk_msg(gspca_dev->dev,
+					urb->pipe,
+					data,
+					FPIX_MAX_TRANSFER,
+					&len, FPIX_TIMEOUT);
+			if (ret < 0) {
+				/* Most of the time we get a timeout
+				 * error. Just restart. */
+				goto again;
+			}
+#ifdef CONFIG_PM
+			if (gspca_dev->frozen)
+				goto out;
+#endif
+			if (!gspca_dev->present || !gspca_dev->streaming)
+				goto out;
+			if (len < FPIX_MAX_TRANSFER ||
+				(data[len - 2] == 0xff &&
+					data[len - 1] == 0xd9)) {
+
+				/* If the result is less than what was asked
+				 * for, then it's the end of the
+				 * frame. Sometimes the jpeg is not complete,
+				 * but there's nothing we can do. We also end
+				 * here if the jpeg ends right at the end
+				 * of the frame. */
+				gspca_frame_add(gspca_dev, LAST_PACKET,
+						data, len);
+				break;
+			}
+
+			/* got a partial image */
+			gspca_frame_add(gspca_dev,
+					gspca_dev->last_packet_type
+						== LAST_PACKET
+					? FIRST_PACKET : INTER_PACKET,
+					data, len);
+		}
+
+		/* We must wait before trying reading the next
+		 * frame. If we don't, or if the delay is too short,
+		 * the camera will disconnect. */
+		msleep(NEXT_FRAME_DELAY);
+	}
+
+out:
+	gspca_dbg(gspca_dev, D_STREAM, "dostream stopped\n");
+}
+
+/* this function is called at probe time */
+static int sd_config(struct gspca_dev *gspca_dev,
+		const struct usb_device_id *id)
+{
+	struct usb_fpix *dev = (struct usb_fpix *) gspca_dev;
+	struct cam *cam = &gspca_dev->cam;
+
+	cam->cam_mode = fpix_mode;
+	cam->nmodes = 1;
+	cam->bulk = 1;
+	cam->bulk_size = FPIX_MAX_TRANSFER;
+
+	INIT_WORK(&dev->work_struct, dostream);
+
+	return 0;
+}
+
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+	return 0;
+}
+
+/* start the camera */
+static int sd_start(struct gspca_dev *gspca_dev)
+{
+	struct usb_fpix *dev = (struct usb_fpix *) gspca_dev;
+	int ret, len;
+
+	/* Init the device */
+	ret = command(gspca_dev, 0);
+	if (ret < 0) {
+		pr_err("init failed %d\n", ret);
+		return ret;
+	}
+
+	/* Read the result of the command. Ignore the result, for it
+	 * varies with the device. */
+	ret = usb_bulk_msg(gspca_dev->dev,
+			gspca_dev->urb[0]->pipe,
+			gspca_dev->urb[0]->transfer_buffer,
+			FPIX_MAX_TRANSFER, &len,
+			FPIX_TIMEOUT);
+	if (ret < 0) {
+		pr_err("usb_bulk_msg failed %d\n", ret);
+		return ret;
+	}
+
+	/* Request a frame, but don't read it */
+	ret = command(gspca_dev, 1);
+	if (ret < 0) {
+		pr_err("frame request failed %d\n", ret);
+		return ret;
+	}
+
+	/* Again, reset bulk in endpoint */
+	usb_clear_halt(gspca_dev->dev, gspca_dev->urb[0]->pipe);
+
+	schedule_work(&dev->work_struct);
+
+	return 0;
+}
+
+/* called on streamoff with alt==0 and on disconnect */
+/* the usb_lock is held at entry - restore on exit */
+static void sd_stop0(struct gspca_dev *gspca_dev)
+{
+	struct usb_fpix *dev = (struct usb_fpix *) gspca_dev;
+
+	/* wait for the work queue to terminate */
+	mutex_unlock(&gspca_dev->usb_lock);
+	flush_work(&dev->work_struct);
+	mutex_lock(&gspca_dev->usb_lock);
+}
+
+/* Table of supported USB devices */
+static const struct usb_device_id device_table[] = {
+	{USB_DEVICE(0x04cb, 0x0104)},
+	{USB_DEVICE(0x04cb, 0x0109)},
+	{USB_DEVICE(0x04cb, 0x010b)},
+	{USB_DEVICE(0x04cb, 0x010f)},
+	{USB_DEVICE(0x04cb, 0x0111)},
+	{USB_DEVICE(0x04cb, 0x0113)},
+	{USB_DEVICE(0x04cb, 0x0115)},
+	{USB_DEVICE(0x04cb, 0x0117)},
+	{USB_DEVICE(0x04cb, 0x0119)},
+	{USB_DEVICE(0x04cb, 0x011b)},
+	{USB_DEVICE(0x04cb, 0x011d)},
+	{USB_DEVICE(0x04cb, 0x0121)},
+	{USB_DEVICE(0x04cb, 0x0123)},
+	{USB_DEVICE(0x04cb, 0x0125)},
+	{USB_DEVICE(0x04cb, 0x0127)},
+	{USB_DEVICE(0x04cb, 0x0129)},
+	{USB_DEVICE(0x04cb, 0x012b)},
+	{USB_DEVICE(0x04cb, 0x012d)},
+	{USB_DEVICE(0x04cb, 0x012f)},
+	{USB_DEVICE(0x04cb, 0x0131)},
+	{USB_DEVICE(0x04cb, 0x013b)},
+	{USB_DEVICE(0x04cb, 0x013d)},
+	{USB_DEVICE(0x04cb, 0x013f)},
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, device_table);
+
+/* sub-driver description */
+static const struct sd_desc sd_desc = {
+	.name   = MODULE_NAME,
+	.config = sd_config,
+	.init   = sd_init,
+	.start  = sd_start,
+	.stop0  = sd_stop0,
+};
+
+/* -- device connect -- */
+static int sd_probe(struct usb_interface *intf,
+		const struct usb_device_id *id)
+{
+	return gspca_dev_probe(intf, id,
+			&sd_desc,
+			sizeof(struct usb_fpix),
+			THIS_MODULE);
+}
+
+static struct usb_driver sd_driver = {
+	.name       = MODULE_NAME,
+	.id_table   = device_table,
+	.probe      = sd_probe,
+	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume  = gspca_resume,
+	.reset_resume = gspca_resume,
+#endif
+};
+
+module_usb_driver(sd_driver);