Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 202 insertions, 0 deletions

diff --git a/drivers/media/usb/stk1160/stk1160.h b/drivers/media/usb/stk1160/stk1160.h
new file mode 100644
index 000000000..7b498d14e
--- /dev/null
+++ b/drivers/media/usb/stk1160/stk1160.h
@@ -0,0 +1,202 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * STK1160 driver
+ *
+ * Copyright (C) 2012 Ezequiel Garcia
+ * <elezegarcia--a.t--gmail.com>
+ *
+ * Based on Easycap driver by R.M. Thomas
+ *	Copyright (C) 2010 R.M. Thomas
+ *	<rmthomas--a.t--sciolus.org>
+ */
+
+#include <linux/i2c.h>
+#include <sound/core.h>
+#include <sound/ac97_codec.h>
+#include <media/videobuf2-v4l2.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#define STK1160_VERSION		"0.9.5"
+#define STK1160_VERSION_NUM	0x000905
+
+/* Decide on number of packets for each buffer */
+#define STK1160_NUM_PACKETS 64
+
+/* Number of buffers for isoc transfers */
+#define STK1160_NUM_BUFS 16
+#define STK1160_MIN_BUFS 1
+
+/* TODO: This endpoint address should be retrieved */
+#define STK1160_EP_VIDEO 0x82
+#define STK1160_EP_AUDIO 0x81
+
+/* Max and min video buffers */
+#define STK1160_MIN_VIDEO_BUFFERS 8
+#define STK1160_MAX_VIDEO_BUFFERS 32
+
+#define STK1160_MIN_PKT_SIZE 3072
+
+#define STK1160_MAX_INPUT 4
+#define STK1160_SVIDEO_INPUT 4
+
+#define STK1160_AC97_TIMEOUT 50
+
+#define STK1160_I2C_TIMEOUT 100
+
+/* TODO: Print helpers
+ * I could use dev_xxx, pr_xxx, v4l2_xxx or printk.
+ * However, there isn't a solid consensus on which
+ * new drivers should use.
+ *
+ */
+#ifdef DEBUG
+#define stk1160_dbg(fmt, args...) \
+	printk(KERN_DEBUG "stk1160: " fmt,  ## args)
+#else
+#define stk1160_dbg(fmt, args...)
+#endif
+
+#define stk1160_info(fmt, args...) \
+	pr_info("stk1160: " fmt, ## args)
+
+#define stk1160_warn(fmt, args...) \
+	pr_warn("stk1160: " fmt, ## args)
+
+#define stk1160_err(fmt, args...) \
+	pr_err("stk1160: " fmt, ## args)
+
+/* Buffer for one video frame */
+struct stk1160_buffer {
+	/* common v4l buffer stuff -- must be first */
+	struct vb2_v4l2_buffer vb;
+	struct list_head list;
+
+	void *mem;
+	unsigned int length;		/* buffer length */
+	unsigned int bytesused;		/* bytes written */
+	int odd;			/* current oddity */
+
+	/*
+	 * Since we interlace two fields per frame,
+	 * this is different from bytesused.
+	 */
+	unsigned int pos;		/* current pos inside buffer */
+};
+
+struct stk1160_urb {
+	struct urb *urb;
+	char *transfer_buffer;
+	struct sg_table *sgt;
+	struct stk1160 *dev;
+	dma_addr_t dma;
+};
+
+struct stk1160_isoc_ctl {
+	/* max packet size of isoc transaction */
+	int max_pkt_size;
+
+	/* number of allocated urbs */
+	int num_bufs;
+
+	struct stk1160_urb urb_ctl[STK1160_NUM_BUFS];
+
+	/* current buffer */
+	struct stk1160_buffer *buf;
+};
+
+struct stk1160_fmt {
+	u32   fourcc;          /* v4l2 format id */
+	int   depth;
+};
+
+struct stk1160 {
+	struct v4l2_device v4l2_dev;
+	struct video_device vdev;
+	struct v4l2_ctrl_handler ctrl_handler;
+
+	struct device *dev;
+	struct usb_device *udev;
+
+	/* saa7115 subdev */
+	struct v4l2_subdev *sd_saa7115;
+
+	/* isoc control struct */
+	struct list_head avail_bufs;
+
+	/* video capture */
+	struct vb2_queue vb_vidq;
+
+	/* max packet size of isoc transaction */
+	int max_pkt_size;
+	/* array of wMaxPacketSize */
+	unsigned int *alt_max_pkt_size;
+	/* alternate */
+	int alt;
+	/* Number of alternative settings */
+	int num_alt;
+
+	struct stk1160_isoc_ctl isoc_ctl;
+
+	/* frame properties */
+	int width;		  /* current frame width */
+	int height;		  /* current frame height */
+	unsigned int ctl_input;	  /* selected input */
+	v4l2_std_id norm;	  /* current norm */
+	struct stk1160_fmt *fmt;  /* selected format */
+
+	unsigned int sequence;
+
+	/* i2c i/o */
+	struct i2c_adapter i2c_adap;
+	struct i2c_client i2c_client;
+
+	struct mutex v4l_lock;
+	struct mutex vb_queue_lock;
+	spinlock_t buf_lock;
+
+	struct file *fh_owner;	/* filehandle ownership */
+
+	/* EXPERIMENTAL */
+	struct snd_card *snd_card;
+};
+
+struct regval {
+	u16 reg;
+	u16 val;
+};
+
+/* Provided by stk1160-v4l.c */
+int stk1160_vb2_setup(struct stk1160 *dev);
+int stk1160_video_register(struct stk1160 *dev);
+void stk1160_video_unregister(struct stk1160 *dev);
+void stk1160_clear_queue(struct stk1160 *dev, enum vb2_buffer_state vb2_state);
+
+/* Provided by stk1160-video.c */
+int stk1160_alloc_isoc(struct stk1160 *dev);
+void stk1160_free_isoc(struct stk1160 *dev);
+void stk1160_cancel_isoc(struct stk1160 *dev);
+void stk1160_uninit_isoc(struct stk1160 *dev);
+
+/* Provided by stk1160-i2c.c */
+int stk1160_i2c_register(struct stk1160 *dev);
+int stk1160_i2c_unregister(struct stk1160 *dev);
+
+/* Provided by stk1160-core.c */
+int stk1160_read_reg(struct stk1160 *dev, u16 reg, u8 *value);
+int stk1160_write_reg(struct stk1160 *dev, u16 reg, u16 value);
+int stk1160_write_regs_req(struct stk1160 *dev, u8 req, u16 reg,
+		char *buf, int len);
+int stk1160_read_reg_req_len(struct stk1160 *dev, u8 req, u16 reg,
+		char *buf, int len);
+void stk1160_select_input(struct stk1160 *dev);
+
+/* Provided by stk1160-ac97.c */
+void stk1160_ac97_setup(struct stk1160 *dev);
+
+static inline struct device *stk1160_get_dmadev(struct stk1160 *dev)
+{
+	return bus_to_hcd(dev->udev->bus)->self.sysdev;
+}