Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 648 insertions, 0 deletions

diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c
new file mode 100644
index 000000000..e749dcb3d
--- /dev/null
+++ b/drivers/memory/atmel-ebi.c
@@ -0,0 +1,648 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * EBI driver for Atmel chips
+ * inspired by the fsl weim bus driver
+ *
+ * Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/atmel-matrix.h>
+#include <linux/mfd/syscon/atmel-smc.h>
+#include <linux/init.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <soc/at91/atmel-sfr.h>
+
+#define AT91_EBI_NUM_CS		8
+
+struct atmel_ebi_dev_config {
+	int cs;
+	struct atmel_smc_cs_conf smcconf;
+};
+
+struct atmel_ebi;
+
+struct atmel_ebi_dev {
+	struct list_head node;
+	struct atmel_ebi *ebi;
+	u32 mode;
+	int numcs;
+	struct atmel_ebi_dev_config configs[];
+};
+
+struct atmel_ebi_caps {
+	unsigned int available_cs;
+	unsigned int ebi_csa_offs;
+	const char *regmap_name;
+	void (*get_config)(struct atmel_ebi_dev *ebid,
+			   struct atmel_ebi_dev_config *conf);
+	int (*xlate_config)(struct atmel_ebi_dev *ebid,
+			    struct device_node *configs_np,
+			    struct atmel_ebi_dev_config *conf);
+	void (*apply_config)(struct atmel_ebi_dev *ebid,
+			     struct atmel_ebi_dev_config *conf);
+};
+
+struct atmel_ebi {
+	struct clk *clk;
+	struct regmap *regmap;
+	struct  {
+		struct regmap *regmap;
+		struct clk *clk;
+		const struct atmel_hsmc_reg_layout *layout;
+	} smc;
+
+	struct device *dev;
+	const struct atmel_ebi_caps *caps;
+	struct list_head devs;
+};
+
+struct atmel_smc_timing_xlate {
+	const char *name;
+	int (*converter)(struct atmel_smc_cs_conf *conf,
+			 unsigned int shift, unsigned int nycles);
+	unsigned int shift;
+};
+
+#define ATMEL_SMC_SETUP_XLATE(nm, pos)	\
+	{ .name = nm, .converter = atmel_smc_cs_conf_set_setup, .shift = pos}
+
+#define ATMEL_SMC_PULSE_XLATE(nm, pos)	\
+	{ .name = nm, .converter = atmel_smc_cs_conf_set_pulse, .shift = pos}
+
+#define ATMEL_SMC_CYCLE_XLATE(nm, pos)	\
+	{ .name = nm, .converter = atmel_smc_cs_conf_set_cycle, .shift = pos}
+
+static void at91sam9_ebi_get_config(struct atmel_ebi_dev *ebid,
+				    struct atmel_ebi_dev_config *conf)
+{
+	atmel_smc_cs_conf_get(ebid->ebi->smc.regmap, conf->cs,
+			      &conf->smcconf);
+}
+
+static void sama5_ebi_get_config(struct atmel_ebi_dev *ebid,
+				 struct atmel_ebi_dev_config *conf)
+{
+	atmel_hsmc_cs_conf_get(ebid->ebi->smc.regmap, ebid->ebi->smc.layout,
+			       conf->cs, &conf->smcconf);
+}
+
+static const struct atmel_smc_timing_xlate timings_xlate_table[] = {
+	ATMEL_SMC_SETUP_XLATE("atmel,smc-ncs-rd-setup-ns",
+			      ATMEL_SMC_NCS_RD_SHIFT),
+	ATMEL_SMC_SETUP_XLATE("atmel,smc-ncs-wr-setup-ns",
+			      ATMEL_SMC_NCS_WR_SHIFT),
+	ATMEL_SMC_SETUP_XLATE("atmel,smc-nrd-setup-ns", ATMEL_SMC_NRD_SHIFT),
+	ATMEL_SMC_SETUP_XLATE("atmel,smc-nwe-setup-ns", ATMEL_SMC_NWE_SHIFT),
+	ATMEL_SMC_PULSE_XLATE("atmel,smc-ncs-rd-pulse-ns",
+			      ATMEL_SMC_NCS_RD_SHIFT),
+	ATMEL_SMC_PULSE_XLATE("atmel,smc-ncs-wr-pulse-ns",
+			      ATMEL_SMC_NCS_WR_SHIFT),
+	ATMEL_SMC_PULSE_XLATE("atmel,smc-nrd-pulse-ns", ATMEL_SMC_NRD_SHIFT),
+	ATMEL_SMC_PULSE_XLATE("atmel,smc-nwe-pulse-ns", ATMEL_SMC_NWE_SHIFT),
+	ATMEL_SMC_CYCLE_XLATE("atmel,smc-nrd-cycle-ns", ATMEL_SMC_NRD_SHIFT),
+	ATMEL_SMC_CYCLE_XLATE("atmel,smc-nwe-cycle-ns", ATMEL_SMC_NWE_SHIFT),
+};
+
+static int atmel_ebi_xslate_smc_timings(struct atmel_ebi_dev *ebid,
+					struct device_node *np,
+					struct atmel_smc_cs_conf *smcconf)
+{
+	unsigned int clk_rate = clk_get_rate(ebid->ebi->clk);
+	unsigned int clk_period_ns = NSEC_PER_SEC / clk_rate;
+	bool required = false;
+	unsigned int ncycles;
+	int ret, i;
+	u32 val;
+
+	ret = of_property_read_u32(np, "atmel,smc-tdf-ns", &val);
+	if (!ret) {
+		required = true;
+		ncycles = DIV_ROUND_UP(val, clk_period_ns);
+		if (ncycles > ATMEL_SMC_MODE_TDF_MAX) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		if (ncycles < ATMEL_SMC_MODE_TDF_MIN)
+			ncycles = ATMEL_SMC_MODE_TDF_MIN;
+
+		smcconf->mode |= ATMEL_SMC_MODE_TDF(ncycles);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(timings_xlate_table); i++) {
+		const struct atmel_smc_timing_xlate *xlate;
+
+		xlate = &timings_xlate_table[i];
+
+		ret = of_property_read_u32(np, xlate->name, &val);
+		if (ret) {
+			if (!required)
+				continue;
+			else
+				break;
+		}
+
+		if (!required) {
+			ret = -EINVAL;
+			break;
+		}
+
+		ncycles = DIV_ROUND_UP(val, clk_period_ns);
+		ret = xlate->converter(smcconf, xlate->shift, ncycles);
+		if (ret)
+			goto out;
+	}
+
+out:
+	if (ret) {
+		dev_err(ebid->ebi->dev,
+			"missing or invalid timings definition in %pOF",
+			np);
+		return ret;
+	}
+
+	return required;
+}
+
+static int atmel_ebi_xslate_smc_config(struct atmel_ebi_dev *ebid,
+				       struct device_node *np,
+				       struct atmel_ebi_dev_config *conf)
+{
+	struct atmel_smc_cs_conf *smcconf = &conf->smcconf;
+	bool required = false;
+	const char *tmp_str;
+	u32 tmp;
+	int ret;
+
+	ret = of_property_read_u32(np, "atmel,smc-bus-width", &tmp);
+	if (!ret) {
+		switch (tmp) {
+		case 8:
+			smcconf->mode |= ATMEL_SMC_MODE_DBW_8;
+			break;
+
+		case 16:
+			smcconf->mode |= ATMEL_SMC_MODE_DBW_16;
+			break;
+
+		case 32:
+			smcconf->mode |= ATMEL_SMC_MODE_DBW_32;
+			break;
+
+		default:
+			return -EINVAL;
+		}
+
+		required = true;
+	}
+
+	if (of_property_read_bool(np, "atmel,smc-tdf-optimized")) {
+		smcconf->mode |= ATMEL_SMC_MODE_TDFMODE_OPTIMIZED;
+		required = true;
+	}
+
+	tmp_str = NULL;
+	of_property_read_string(np, "atmel,smc-byte-access-type", &tmp_str);
+	if (tmp_str && !strcmp(tmp_str, "write")) {
+		smcconf->mode |= ATMEL_SMC_MODE_BAT_WRITE;
+		required = true;
+	}
+
+	tmp_str = NULL;
+	of_property_read_string(np, "atmel,smc-read-mode", &tmp_str);
+	if (tmp_str && !strcmp(tmp_str, "nrd")) {
+		smcconf->mode |= ATMEL_SMC_MODE_READMODE_NRD;
+		required = true;
+	}
+
+	tmp_str = NULL;
+	of_property_read_string(np, "atmel,smc-write-mode", &tmp_str);
+	if (tmp_str && !strcmp(tmp_str, "nwe")) {
+		smcconf->mode |= ATMEL_SMC_MODE_WRITEMODE_NWE;
+		required = true;
+	}
+
+	tmp_str = NULL;
+	of_property_read_string(np, "atmel,smc-exnw-mode", &tmp_str);
+	if (tmp_str) {
+		if (!strcmp(tmp_str, "frozen"))
+			smcconf->mode |= ATMEL_SMC_MODE_EXNWMODE_FROZEN;
+		else if (!strcmp(tmp_str, "ready"))
+			smcconf->mode |= ATMEL_SMC_MODE_EXNWMODE_READY;
+		else if (strcmp(tmp_str, "disabled"))
+			return -EINVAL;
+
+		required = true;
+	}
+
+	ret = of_property_read_u32(np, "atmel,smc-page-mode", &tmp);
+	if (!ret) {
+		switch (tmp) {
+		case 4:
+			smcconf->mode |= ATMEL_SMC_MODE_PS_4;
+			break;
+
+		case 8:
+			smcconf->mode |= ATMEL_SMC_MODE_PS_8;
+			break;
+
+		case 16:
+			smcconf->mode |= ATMEL_SMC_MODE_PS_16;
+			break;
+
+		case 32:
+			smcconf->mode |= ATMEL_SMC_MODE_PS_32;
+			break;
+
+		default:
+			return -EINVAL;
+		}
+
+		smcconf->mode |= ATMEL_SMC_MODE_PMEN;
+		required = true;
+	}
+
+	ret = atmel_ebi_xslate_smc_timings(ebid, np, &conf->smcconf);
+	if (ret < 0)
+		return -EINVAL;
+
+	if ((ret > 0 && !required) || (!ret && required)) {
+		dev_err(ebid->ebi->dev, "missing atmel,smc- properties in %pOF",
+			np);
+		return -EINVAL;
+	}
+
+	return required;
+}
+
+static void at91sam9_ebi_apply_config(struct atmel_ebi_dev *ebid,
+				      struct atmel_ebi_dev_config *conf)
+{
+	atmel_smc_cs_conf_apply(ebid->ebi->smc.regmap, conf->cs,
+				&conf->smcconf);
+}
+
+static void sama5_ebi_apply_config(struct atmel_ebi_dev *ebid,
+				   struct atmel_ebi_dev_config *conf)
+{
+	atmel_hsmc_cs_conf_apply(ebid->ebi->smc.regmap, ebid->ebi->smc.layout,
+				 conf->cs, &conf->smcconf);
+}
+
+static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np,
+			       int reg_cells)
+{
+	const struct atmel_ebi_caps *caps = ebi->caps;
+	struct atmel_ebi_dev_config conf = { };
+	struct device *dev = ebi->dev;
+	struct atmel_ebi_dev *ebid;
+	unsigned long cslines = 0;
+	int ret, numcs = 0, nentries, i;
+	bool apply = false;
+	u32 cs;
+
+	nentries = of_property_count_elems_of_size(np, "reg",
+						   reg_cells * sizeof(u32));
+	for (i = 0; i < nentries; i++) {
+		ret = of_property_read_u32_index(np, "reg", i * reg_cells,
+						 &cs);
+		if (ret)
+			return ret;
+
+		if (cs >= AT91_EBI_NUM_CS ||
+		    !(ebi->caps->available_cs & BIT(cs))) {
+			dev_err(dev, "invalid reg property in %pOF\n", np);
+			return -EINVAL;
+		}
+
+		if (!test_and_set_bit(cs, &cslines))
+			numcs++;
+	}
+
+	if (!numcs) {
+		dev_err(dev, "invalid reg property in %pOF\n", np);
+		return -EINVAL;
+	}
+
+	ebid = devm_kzalloc(ebi->dev, struct_size(ebid, configs, numcs),
+			    GFP_KERNEL);
+	if (!ebid)
+		return -ENOMEM;
+
+	ebid->ebi = ebi;
+	ebid->numcs = numcs;
+
+	ret = caps->xlate_config(ebid, np, &conf);
+	if (ret < 0)
+		return ret;
+	else if (ret)
+		apply = true;
+
+	i = 0;
+	for_each_set_bit(cs, &cslines, AT91_EBI_NUM_CS) {
+		ebid->configs[i].cs = cs;
+
+		if (apply) {
+			conf.cs = cs;
+			caps->apply_config(ebid, &conf);
+		}
+
+		caps->get_config(ebid, &ebid->configs[i]);
+
+		/*
+		 * Attach the EBI device to the generic SMC logic if at least
+		 * one "atmel,smc-" property is present.
+		 */
+		if (ebi->caps->ebi_csa_offs && apply)
+			regmap_update_bits(ebi->regmap,
+					   ebi->caps->ebi_csa_offs,
+					   BIT(cs), 0);
+
+		i++;
+	}
+
+	list_add_tail(&ebid->node, &ebi->devs);
+
+	return 0;
+}
+
+static const struct atmel_ebi_caps at91sam9260_ebi_caps = {
+	.available_cs = 0xff,
+	.ebi_csa_offs = AT91SAM9260_MATRIX_EBICSA,
+	.regmap_name = "atmel,matrix",
+	.get_config = at91sam9_ebi_get_config,
+	.xlate_config = atmel_ebi_xslate_smc_config,
+	.apply_config = at91sam9_ebi_apply_config,
+};
+
+static const struct atmel_ebi_caps at91sam9261_ebi_caps = {
+	.available_cs = 0xff,
+	.ebi_csa_offs = AT91SAM9261_MATRIX_EBICSA,
+	.regmap_name = "atmel,matrix",
+	.get_config = at91sam9_ebi_get_config,
+	.xlate_config = atmel_ebi_xslate_smc_config,
+	.apply_config = at91sam9_ebi_apply_config,
+};
+
+static const struct atmel_ebi_caps at91sam9263_ebi0_caps = {
+	.available_cs = 0x3f,
+	.ebi_csa_offs = AT91SAM9263_MATRIX_EBI0CSA,
+	.regmap_name = "atmel,matrix",
+	.get_config = at91sam9_ebi_get_config,
+	.xlate_config = atmel_ebi_xslate_smc_config,
+	.apply_config = at91sam9_ebi_apply_config,
+};
+
+static const struct atmel_ebi_caps at91sam9263_ebi1_caps = {
+	.available_cs = 0x7,
+	.ebi_csa_offs = AT91SAM9263_MATRIX_EBI1CSA,
+	.regmap_name = "atmel,matrix",
+	.get_config = at91sam9_ebi_get_config,
+	.xlate_config = atmel_ebi_xslate_smc_config,
+	.apply_config = at91sam9_ebi_apply_config,
+};
+
+static const struct atmel_ebi_caps at91sam9rl_ebi_caps = {
+	.available_cs = 0x3f,
+	.ebi_csa_offs = AT91SAM9RL_MATRIX_EBICSA,
+	.regmap_name = "atmel,matrix",
+	.get_config = at91sam9_ebi_get_config,
+	.xlate_config = atmel_ebi_xslate_smc_config,
+	.apply_config = at91sam9_ebi_apply_config,
+};
+
+static const struct atmel_ebi_caps at91sam9g45_ebi_caps = {
+	.available_cs = 0x3f,
+	.ebi_csa_offs = AT91SAM9G45_MATRIX_EBICSA,
+	.regmap_name = "atmel,matrix",
+	.get_config = at91sam9_ebi_get_config,
+	.xlate_config = atmel_ebi_xslate_smc_config,
+	.apply_config = at91sam9_ebi_apply_config,
+};
+
+static const struct atmel_ebi_caps at91sam9x5_ebi_caps = {
+	.available_cs = 0x3f,
+	.ebi_csa_offs = AT91SAM9X5_MATRIX_EBICSA,
+	.regmap_name = "atmel,matrix",
+	.get_config = at91sam9_ebi_get_config,
+	.xlate_config = atmel_ebi_xslate_smc_config,
+	.apply_config = at91sam9_ebi_apply_config,
+};
+
+static const struct atmel_ebi_caps sama5d3_ebi_caps = {
+	.available_cs = 0xf,
+	.get_config = sama5_ebi_get_config,
+	.xlate_config = atmel_ebi_xslate_smc_config,
+	.apply_config = sama5_ebi_apply_config,
+};
+
+static const struct atmel_ebi_caps sam9x60_ebi_caps = {
+	.available_cs = 0x3f,
+	.ebi_csa_offs = AT91_SFR_CCFG_EBICSA,
+	.regmap_name = "microchip,sfr",
+	.get_config = at91sam9_ebi_get_config,
+	.xlate_config = atmel_ebi_xslate_smc_config,
+	.apply_config = at91sam9_ebi_apply_config,
+};
+
+static const struct of_device_id atmel_ebi_id_table[] = {
+	{
+		.compatible = "atmel,at91sam9260-ebi",
+		.data = &at91sam9260_ebi_caps,
+	},
+	{
+		.compatible = "atmel,at91sam9261-ebi",
+		.data = &at91sam9261_ebi_caps,
+	},
+	{
+		.compatible = "atmel,at91sam9263-ebi0",
+		.data = &at91sam9263_ebi0_caps,
+	},
+	{
+		.compatible = "atmel,at91sam9263-ebi1",
+		.data = &at91sam9263_ebi1_caps,
+	},
+	{
+		.compatible = "atmel,at91sam9rl-ebi",
+		.data = &at91sam9rl_ebi_caps,
+	},
+	{
+		.compatible = "atmel,at91sam9g45-ebi",
+		.data = &at91sam9g45_ebi_caps,
+	},
+	{
+		.compatible = "atmel,at91sam9x5-ebi",
+		.data = &at91sam9x5_ebi_caps,
+	},
+	{
+		.compatible = "atmel,sama5d3-ebi",
+		.data = &sama5d3_ebi_caps,
+	},
+	{
+		.compatible = "microchip,sam9x60-ebi",
+		.data = &sam9x60_ebi_caps,
+	},
+	{ /* sentinel */ }
+};
+
+static int atmel_ebi_dev_disable(struct atmel_ebi *ebi, struct device_node *np)
+{
+	struct device *dev = ebi->dev;
+	struct property *newprop;
+
+	newprop = devm_kzalloc(dev, sizeof(*newprop), GFP_KERNEL);
+	if (!newprop)
+		return -ENOMEM;
+
+	newprop->name = devm_kstrdup(dev, "status", GFP_KERNEL);
+	if (!newprop->name)
+		return -ENOMEM;
+
+	newprop->value = devm_kstrdup(dev, "disabled", GFP_KERNEL);
+	if (!newprop->value)
+		return -ENOMEM;
+
+	newprop->length = sizeof("disabled");
+
+	return of_update_property(np, newprop);
+}
+
+static int atmel_ebi_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *child, *np = dev->of_node, *smc_np;
+	const struct of_device_id *match;
+	struct atmel_ebi *ebi;
+	int ret, reg_cells;
+	struct clk *clk;
+	u32 val;
+
+	match = of_match_device(atmel_ebi_id_table, dev);
+	if (!match || !match->data)
+		return -EINVAL;
+
+	ebi = devm_kzalloc(dev, sizeof(*ebi), GFP_KERNEL);
+	if (!ebi)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ebi);
+
+	INIT_LIST_HEAD(&ebi->devs);
+	ebi->caps = match->data;
+	ebi->dev = dev;
+
+	clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	ebi->clk = clk;
+
+	smc_np = of_parse_phandle(dev->of_node, "atmel,smc", 0);
+
+	ebi->smc.regmap = syscon_node_to_regmap(smc_np);
+	if (IS_ERR(ebi->smc.regmap)) {
+		ret = PTR_ERR(ebi->smc.regmap);
+		goto put_node;
+	}
+
+	ebi->smc.layout = atmel_hsmc_get_reg_layout(smc_np);
+	if (IS_ERR(ebi->smc.layout)) {
+		ret = PTR_ERR(ebi->smc.layout);
+		goto put_node;
+	}
+
+	ebi->smc.clk = of_clk_get(smc_np, 0);
+	if (IS_ERR(ebi->smc.clk)) {
+		if (PTR_ERR(ebi->smc.clk) != -ENOENT) {
+			ret = PTR_ERR(ebi->smc.clk);
+			goto put_node;
+		}
+
+		ebi->smc.clk = NULL;
+	}
+	of_node_put(smc_np);
+	ret = clk_prepare_enable(ebi->smc.clk);
+	if (ret)
+		return ret;
+
+	/*
+	 * The sama5d3 does not provide an EBICSA register and thus does need
+	 * to access it.
+	 */
+	if (ebi->caps->ebi_csa_offs) {
+		ebi->regmap =
+			syscon_regmap_lookup_by_phandle(np,
+							ebi->caps->regmap_name);
+		if (IS_ERR(ebi->regmap))
+			return PTR_ERR(ebi->regmap);
+	}
+
+	ret = of_property_read_u32(np, "#address-cells", &val);
+	if (ret) {
+		dev_err(dev, "missing #address-cells property\n");
+		return ret;
+	}
+
+	reg_cells = val;
+
+	ret = of_property_read_u32(np, "#size-cells", &val);
+	if (ret) {
+		dev_err(dev, "missing #address-cells property\n");
+		return ret;
+	}
+
+	reg_cells += val;
+
+	for_each_available_child_of_node(np, child) {
+		if (!of_find_property(child, "reg", NULL))
+			continue;
+
+		ret = atmel_ebi_dev_setup(ebi, child, reg_cells);
+		if (ret) {
+			dev_err(dev, "failed to configure EBI bus for %pOF, disabling the device",
+				child);
+
+			ret = atmel_ebi_dev_disable(ebi, child);
+			if (ret) {
+				of_node_put(child);
+				return ret;
+			}
+		}
+	}
+
+	return of_platform_populate(np, NULL, NULL, dev);
+
+put_node:
+	of_node_put(smc_np);
+	return ret;
+}
+
+static __maybe_unused int atmel_ebi_resume(struct device *dev)
+{
+	struct atmel_ebi *ebi = dev_get_drvdata(dev);
+	struct atmel_ebi_dev *ebid;
+
+	list_for_each_entry(ebid, &ebi->devs, node) {
+		int i;
+
+		for (i = 0; i < ebid->numcs; i++)
+			ebid->ebi->caps->apply_config(ebid, &ebid->configs[i]);
+	}
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(atmel_ebi_pm_ops, NULL, atmel_ebi_resume);
+
+static struct platform_driver atmel_ebi_driver = {
+	.driver = {
+		.name = "atmel-ebi",
+		.of_match_table	= atmel_ebi_id_table,
+		.pm = &atmel_ebi_pm_ops,
+	},
+};
+builtin_platform_driver_probe(atmel_ebi_driver, atmel_ebi_probe);