Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 398 insertions, 0 deletions

diff --git a/drivers/mfd/lochnagar-i2c.c b/drivers/mfd/lochnagar-i2c.c
new file mode 100644
index 000000000..3a65d9938
--- /dev/null
+++ b/drivers/mfd/lochnagar-i2c.c
@@ -0,0 +1,398 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Lochnagar I2C bus interface
+ *
+ * Copyright (c) 2012-2018 Cirrus Logic, Inc. and
+ *                         Cirrus Logic International Semiconductor Ltd.
+ *
+ * Author: Charles Keepax <ckeepax@opensource.cirrus.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/lockdep.h>
+#include <linux/mfd/core.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+
+#include <linux/mfd/lochnagar.h>
+#include <linux/mfd/lochnagar1_regs.h>
+#include <linux/mfd/lochnagar2_regs.h>
+
+#define LOCHNAGAR_BOOT_RETRIES		10
+#define LOCHNAGAR_BOOT_DELAY_MS		350
+
+#define LOCHNAGAR_CONFIG_POLL_US	10000
+
+static bool lochnagar1_readable_register(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case LOCHNAGAR_SOFTWARE_RESET:
+	case LOCHNAGAR_FIRMWARE_ID1...LOCHNAGAR_FIRMWARE_ID2:
+	case LOCHNAGAR1_CDC_AIF1_SEL...LOCHNAGAR1_CDC_AIF3_SEL:
+	case LOCHNAGAR1_CDC_MCLK1_SEL...LOCHNAGAR1_CDC_MCLK2_SEL:
+	case LOCHNAGAR1_CDC_AIF_CTRL1...LOCHNAGAR1_CDC_AIF_CTRL2:
+	case LOCHNAGAR1_EXT_AIF_CTRL:
+	case LOCHNAGAR1_DSP_AIF1_SEL...LOCHNAGAR1_DSP_AIF2_SEL:
+	case LOCHNAGAR1_DSP_CLKIN_SEL:
+	case LOCHNAGAR1_DSP_AIF:
+	case LOCHNAGAR1_GF_AIF1...LOCHNAGAR1_GF_AIF2:
+	case LOCHNAGAR1_PSIA_AIF:
+	case LOCHNAGAR1_PSIA1_SEL...LOCHNAGAR1_PSIA2_SEL:
+	case LOCHNAGAR1_SPDIF_AIF_SEL:
+	case LOCHNAGAR1_GF_AIF3_SEL...LOCHNAGAR1_GF_AIF4_SEL:
+	case LOCHNAGAR1_GF_CLKOUT1_SEL:
+	case LOCHNAGAR1_GF_AIF1_SEL...LOCHNAGAR1_GF_AIF2_SEL:
+	case LOCHNAGAR1_GF_GPIO2...LOCHNAGAR1_GF_GPIO7:
+	case LOCHNAGAR1_RST:
+	case LOCHNAGAR1_LED1...LOCHNAGAR1_LED2:
+	case LOCHNAGAR1_I2C_CTRL:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config lochnagar1_i2c_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.reg_format_endian = REGMAP_ENDIAN_BIG,
+	.val_format_endian = REGMAP_ENDIAN_BIG,
+
+	.max_register = 0x50,
+	.readable_reg = lochnagar1_readable_register,
+
+	.use_single_read = true,
+	.use_single_write = true,
+
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static const struct reg_sequence lochnagar1_patch[] = {
+	{ 0x40, 0x0083 },
+	{ 0x47, 0x0018 },
+	{ 0x50, 0x0000 },
+};
+
+static bool lochnagar2_readable_register(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case LOCHNAGAR_SOFTWARE_RESET:
+	case LOCHNAGAR_FIRMWARE_ID1...LOCHNAGAR_FIRMWARE_ID2:
+	case LOCHNAGAR2_CDC_AIF1_CTRL...LOCHNAGAR2_CDC_AIF3_CTRL:
+	case LOCHNAGAR2_DSP_AIF1_CTRL...LOCHNAGAR2_DSP_AIF2_CTRL:
+	case LOCHNAGAR2_PSIA1_CTRL...LOCHNAGAR2_PSIA2_CTRL:
+	case LOCHNAGAR2_GF_AIF3_CTRL...LOCHNAGAR2_GF_AIF4_CTRL:
+	case LOCHNAGAR2_GF_AIF1_CTRL...LOCHNAGAR2_GF_AIF2_CTRL:
+	case LOCHNAGAR2_SPDIF_AIF_CTRL:
+	case LOCHNAGAR2_USB_AIF1_CTRL...LOCHNAGAR2_USB_AIF2_CTRL:
+	case LOCHNAGAR2_ADAT_AIF_CTRL:
+	case LOCHNAGAR2_CDC_MCLK1_CTRL...LOCHNAGAR2_CDC_MCLK2_CTRL:
+	case LOCHNAGAR2_DSP_CLKIN_CTRL:
+	case LOCHNAGAR2_PSIA1_MCLK_CTRL...LOCHNAGAR2_PSIA2_MCLK_CTRL:
+	case LOCHNAGAR2_SPDIF_MCLK_CTRL:
+	case LOCHNAGAR2_GF_CLKOUT1_CTRL...LOCHNAGAR2_GF_CLKOUT2_CTRL:
+	case LOCHNAGAR2_ADAT_MCLK_CTRL:
+	case LOCHNAGAR2_SOUNDCARD_MCLK_CTRL:
+	case LOCHNAGAR2_GPIO_FPGA_GPIO1...LOCHNAGAR2_GPIO_FPGA_GPIO6:
+	case LOCHNAGAR2_GPIO_CDC_GPIO1...LOCHNAGAR2_GPIO_CDC_GPIO8:
+	case LOCHNAGAR2_GPIO_DSP_GPIO1...LOCHNAGAR2_GPIO_DSP_GPIO6:
+	case LOCHNAGAR2_GPIO_GF_GPIO2...LOCHNAGAR2_GPIO_GF_GPIO7:
+	case LOCHNAGAR2_GPIO_CDC_AIF1_BCLK...LOCHNAGAR2_GPIO_CDC_AIF3_TXDAT:
+	case LOCHNAGAR2_GPIO_DSP_AIF1_BCLK...LOCHNAGAR2_GPIO_DSP_AIF2_TXDAT:
+	case LOCHNAGAR2_GPIO_PSIA1_BCLK...LOCHNAGAR2_GPIO_PSIA2_TXDAT:
+	case LOCHNAGAR2_GPIO_GF_AIF3_BCLK...LOCHNAGAR2_GPIO_GF_AIF4_TXDAT:
+	case LOCHNAGAR2_GPIO_GF_AIF1_BCLK...LOCHNAGAR2_GPIO_GF_AIF2_TXDAT:
+	case LOCHNAGAR2_GPIO_DSP_UART1_RX...LOCHNAGAR2_GPIO_DSP_UART2_TX:
+	case LOCHNAGAR2_GPIO_GF_UART2_RX...LOCHNAGAR2_GPIO_GF_UART2_TX:
+	case LOCHNAGAR2_GPIO_USB_UART_RX:
+	case LOCHNAGAR2_GPIO_CDC_PDMCLK1...LOCHNAGAR2_GPIO_CDC_PDMDAT2:
+	case LOCHNAGAR2_GPIO_CDC_DMICCLK1...LOCHNAGAR2_GPIO_CDC_DMICDAT4:
+	case LOCHNAGAR2_GPIO_DSP_DMICCLK1...LOCHNAGAR2_GPIO_DSP_DMICDAT2:
+	case LOCHNAGAR2_GPIO_I2C2_SCL...LOCHNAGAR2_GPIO_I2C4_SDA:
+	case LOCHNAGAR2_GPIO_DSP_STANDBY:
+	case LOCHNAGAR2_GPIO_CDC_MCLK1...LOCHNAGAR2_GPIO_CDC_MCLK2:
+	case LOCHNAGAR2_GPIO_DSP_CLKIN:
+	case LOCHNAGAR2_GPIO_PSIA1_MCLK...LOCHNAGAR2_GPIO_PSIA2_MCLK:
+	case LOCHNAGAR2_GPIO_GF_GPIO1...LOCHNAGAR2_GPIO_GF_GPIO5:
+	case LOCHNAGAR2_GPIO_DSP_GPIO20:
+	case LOCHNAGAR2_GPIO_CHANNEL1...LOCHNAGAR2_GPIO_CHANNEL16:
+	case LOCHNAGAR2_MINICARD_RESETS:
+	case LOCHNAGAR2_ANALOGUE_PATH_CTRL1...LOCHNAGAR2_ANALOGUE_PATH_CTRL2:
+	case LOCHNAGAR2_COMMS_CTRL4:
+	case LOCHNAGAR2_SPDIF_CTRL:
+	case LOCHNAGAR2_IMON_CTRL1...LOCHNAGAR2_IMON_CTRL4:
+	case LOCHNAGAR2_IMON_DATA1...LOCHNAGAR2_IMON_DATA2:
+	case LOCHNAGAR2_POWER_CTRL:
+	case LOCHNAGAR2_MICVDD_CTRL1:
+	case LOCHNAGAR2_MICVDD_CTRL2:
+	case LOCHNAGAR2_VDDCORE_CDC_CTRL1:
+	case LOCHNAGAR2_VDDCORE_CDC_CTRL2:
+	case LOCHNAGAR2_SOUNDCARD_AIF_CTRL:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool lochnagar2_volatile_register(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case LOCHNAGAR2_GPIO_CHANNEL1...LOCHNAGAR2_GPIO_CHANNEL16:
+	case LOCHNAGAR2_ANALOGUE_PATH_CTRL1:
+	case LOCHNAGAR2_IMON_CTRL3...LOCHNAGAR2_IMON_CTRL4:
+	case LOCHNAGAR2_IMON_DATA1...LOCHNAGAR2_IMON_DATA2:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config lochnagar2_i2c_regmap = {
+	.reg_bits = 16,
+	.val_bits = 16,
+	.reg_format_endian = REGMAP_ENDIAN_BIG,
+	.val_format_endian = REGMAP_ENDIAN_BIG,
+
+	.max_register = 0x1F1F,
+	.readable_reg = lochnagar2_readable_register,
+	.volatile_reg = lochnagar2_volatile_register,
+
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static const struct reg_sequence lochnagar2_patch[] = {
+	{ 0x00EE, 0x0000 },
+};
+
+struct lochnagar_config {
+	int id;
+	const char * const name;
+	enum lochnagar_type type;
+	const struct regmap_config *regmap;
+	const struct reg_sequence *patch;
+	int npatch;
+};
+
+static struct lochnagar_config lochnagar_configs[] = {
+	{
+		.id = 0x50,
+		.name = "lochnagar1",
+		.type = LOCHNAGAR1,
+		.regmap = &lochnagar1_i2c_regmap,
+		.patch = lochnagar1_patch,
+		.npatch = ARRAY_SIZE(lochnagar1_patch),
+	},
+	{
+		.id = 0xCB58,
+		.name = "lochnagar2",
+		.type = LOCHNAGAR2,
+		.regmap = &lochnagar2_i2c_regmap,
+		.patch = lochnagar2_patch,
+		.npatch = ARRAY_SIZE(lochnagar2_patch),
+	},
+};
+
+static const struct of_device_id lochnagar_of_match[] = {
+	{ .compatible = "cirrus,lochnagar1", .data = &lochnagar_configs[0] },
+	{ .compatible = "cirrus,lochnagar2", .data = &lochnagar_configs[1] },
+	{},
+};
+
+static int lochnagar_wait_for_boot(struct regmap *regmap, unsigned int *id)
+{
+	int i, ret;
+
+	for (i = 0; i < LOCHNAGAR_BOOT_RETRIES; ++i) {
+		msleep(LOCHNAGAR_BOOT_DELAY_MS);
+
+		/* The reset register will return the device ID when read */
+		ret = regmap_read(regmap, LOCHNAGAR_SOFTWARE_RESET, id);
+		if (!ret)
+			return ret;
+	}
+
+	return -ETIMEDOUT;
+}
+
+/**
+ * lochnagar_update_config - Synchronise the boards analogue configuration to
+ *                           the hardware.
+ *
+ * @lochnagar: A pointer to the primary core data structure.
+ *
+ * Return: Zero on success or an appropriate negative error code on failure.
+ */
+int lochnagar_update_config(struct lochnagar *lochnagar)
+{
+	struct regmap *regmap = lochnagar->regmap;
+	unsigned int done = LOCHNAGAR2_ANALOGUE_PATH_UPDATE_STS_MASK;
+	int timeout_ms = LOCHNAGAR_BOOT_DELAY_MS * LOCHNAGAR_BOOT_RETRIES;
+	unsigned int val = 0;
+	int ret;
+
+	lockdep_assert_held(&lochnagar->analogue_config_lock);
+
+	if (lochnagar->type != LOCHNAGAR2)
+		return 0;
+
+	/*
+	 * Toggle the ANALOGUE_PATH_UPDATE bit and wait for the device to
+	 * acknowledge that any outstanding changes to the analogue
+	 * configuration have been applied.
+	 */
+	ret = regmap_write(regmap, LOCHNAGAR2_ANALOGUE_PATH_CTRL1, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(regmap, LOCHNAGAR2_ANALOGUE_PATH_CTRL1,
+			   LOCHNAGAR2_ANALOGUE_PATH_UPDATE_MASK);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read_poll_timeout(regmap,
+				       LOCHNAGAR2_ANALOGUE_PATH_CTRL1, val,
+				       (val & done), LOCHNAGAR_CONFIG_POLL_US,
+				       timeout_ms * 1000);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(lochnagar_update_config);
+
+static int lochnagar_i2c_probe(struct i2c_client *i2c)
+{
+	struct device *dev = &i2c->dev;
+	const struct lochnagar_config *config = NULL;
+	const struct of_device_id *of_id;
+	struct lochnagar *lochnagar;
+	struct gpio_desc *reset, *present;
+	unsigned int val;
+	unsigned int firmwareid;
+	unsigned int devid, rev;
+	int ret;
+
+	lochnagar = devm_kzalloc(dev, sizeof(*lochnagar), GFP_KERNEL);
+	if (!lochnagar)
+		return -ENOMEM;
+
+	of_id = of_match_device(lochnagar_of_match, dev);
+	if (!of_id)
+		return -EINVAL;
+
+	config = of_id->data;
+
+	lochnagar->dev = dev;
+	mutex_init(&lochnagar->analogue_config_lock);
+
+	dev_set_drvdata(dev, lochnagar);
+
+	reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(reset)) {
+		ret = PTR_ERR(reset);
+		dev_err(dev, "Failed to get reset GPIO: %d\n", ret);
+		return ret;
+	}
+
+	present = devm_gpiod_get_optional(dev, "present", GPIOD_OUT_HIGH);
+	if (IS_ERR(present)) {
+		ret = PTR_ERR(present);
+		dev_err(dev, "Failed to get present GPIO: %d\n", ret);
+		return ret;
+	}
+
+	/* Leave the Lochnagar in reset for a reasonable amount of time */
+	msleep(20);
+
+	/* Bring Lochnagar out of reset */
+	gpiod_set_value_cansleep(reset, 1);
+
+	/* Identify Lochnagar */
+	lochnagar->type = config->type;
+
+	lochnagar->regmap = devm_regmap_init_i2c(i2c, config->regmap);
+	if (IS_ERR(lochnagar->regmap)) {
+		ret = PTR_ERR(lochnagar->regmap);
+		dev_err(dev, "Failed to allocate register map: %d\n", ret);
+		return ret;
+	}
+
+	/* Wait for Lochnagar to boot */
+	ret = lochnagar_wait_for_boot(lochnagar->regmap, &val);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read device ID: %d\n", ret);
+		return ret;
+	}
+
+	devid = val & LOCHNAGAR_DEVICE_ID_MASK;
+	rev = val & LOCHNAGAR_REV_ID_MASK;
+
+	if (devid != config->id) {
+		dev_err(dev,
+			"ID does not match %s (expected 0x%x got 0x%x)\n",
+			config->name, config->id, devid);
+		return -ENODEV;
+	}
+
+	/* Identify firmware */
+	ret = regmap_read(lochnagar->regmap, LOCHNAGAR_FIRMWARE_ID1, &val);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read firmware id 1: %d\n", ret);
+		return ret;
+	}
+
+	firmwareid = val;
+
+	ret = regmap_read(lochnagar->regmap, LOCHNAGAR_FIRMWARE_ID2, &val);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read firmware id 2: %d\n", ret);
+		return ret;
+	}
+
+	firmwareid |= (val << config->regmap->val_bits);
+
+	dev_info(dev, "Found %s (0x%x) revision %u firmware 0x%.6x\n",
+		 config->name, devid, rev + 1, firmwareid);
+
+	ret = regmap_register_patch(lochnagar->regmap, config->patch,
+				    config->npatch);
+	if (ret < 0) {
+		dev_err(dev, "Failed to register patch: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_of_platform_populate(dev);
+	if (ret < 0) {
+		dev_err(dev, "Failed to populate child nodes: %d\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+static struct i2c_driver lochnagar_i2c_driver = {
+	.driver = {
+		.name = "lochnagar",
+		.of_match_table = of_match_ptr(lochnagar_of_match),
+		.suppress_bind_attrs = true,
+	},
+	.probe_new = lochnagar_i2c_probe,
+};
+
+static int __init lochnagar_i2c_init(void)
+{
+	int ret;
+
+	ret = i2c_add_driver(&lochnagar_i2c_driver);
+	if (ret)
+		pr_err("Failed to register Lochnagar driver: %d\n", ret);
+
+	return ret;
+}
+subsys_initcall(lochnagar_i2c_init);