Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 383 insertions, 0 deletions

diff --git a/drivers/mfd/rc5t583-irq.c b/drivers/mfd/rc5t583-irq.c
new file mode 100644
index 000000000..621ea61fa
--- /dev/null
+++ b/drivers/mfd/rc5t583-irq.c
@@ -0,0 +1,383 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Interrupt driver for RICOH583 power management chip.
+ *
+ * Copyright (c) 2011-2012, NVIDIA CORPORATION.  All rights reserved.
+ * Author: Laxman dewangan <ldewangan@nvidia.com>
+ *
+ * based on code
+ *      Copyright (C) 2011 RICOH COMPANY,LTD
+ */
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <linux/mfd/rc5t583.h>
+
+enum int_type {
+	SYS_INT  = 0x1,
+	DCDC_INT = 0x2,
+	RTC_INT  = 0x4,
+	ADC_INT  = 0x8,
+	GPIO_INT = 0x10,
+};
+
+static int gpedge_add[] = {
+	RC5T583_GPIO_GPEDGE2,
+	RC5T583_GPIO_GPEDGE2
+};
+
+static int irq_en_add[] = {
+	RC5T583_INT_EN_SYS1,
+	RC5T583_INT_EN_SYS2,
+	RC5T583_INT_EN_DCDC,
+	RC5T583_INT_EN_RTC,
+	RC5T583_INT_EN_ADC1,
+	RC5T583_INT_EN_ADC2,
+	RC5T583_INT_EN_ADC3,
+	RC5T583_GPIO_EN_INT
+};
+
+static int irq_mon_add[] = {
+	RC5T583_INT_MON_SYS1,
+	RC5T583_INT_MON_SYS2,
+	RC5T583_INT_MON_DCDC,
+	RC5T583_INT_MON_RTC,
+	RC5T583_INT_IR_ADCL,
+	RC5T583_INT_IR_ADCH,
+	RC5T583_INT_IR_ADCEND,
+	RC5T583_INT_IR_GPIOF,
+	RC5T583_INT_IR_GPIOR
+};
+
+static int irq_clr_add[] = {
+	RC5T583_INT_IR_SYS1,
+	RC5T583_INT_IR_SYS2,
+	RC5T583_INT_IR_DCDC,
+	RC5T583_INT_IR_RTC,
+	RC5T583_INT_IR_ADCL,
+	RC5T583_INT_IR_ADCH,
+	RC5T583_INT_IR_ADCEND,
+	RC5T583_INT_IR_GPIOF,
+	RC5T583_INT_IR_GPIOR
+};
+
+static int main_int_type[] = {
+	SYS_INT,
+	SYS_INT,
+	DCDC_INT,
+	RTC_INT,
+	ADC_INT,
+	ADC_INT,
+	ADC_INT,
+	GPIO_INT,
+	GPIO_INT,
+};
+
+struct rc5t583_irq_data {
+	u8	int_type;
+	u8	master_bit;
+	u8	int_en_bit;
+	u8	mask_reg_index;
+	int	grp_index;
+};
+
+#define RC5T583_IRQ(_int_type, _master_bit, _grp_index, \
+			_int_bit, _mask_ind)		\
+	{						\
+		.int_type	= _int_type,		\
+		.master_bit	= _master_bit,		\
+		.grp_index	= _grp_index,		\
+		.int_en_bit	= _int_bit,		\
+		.mask_reg_index	= _mask_ind,		\
+	}
+
+static const struct rc5t583_irq_data rc5t583_irqs[RC5T583_MAX_IRQS] = {
+	[RC5T583_IRQ_ONKEY]		= RC5T583_IRQ(SYS_INT,  0, 0, 0, 0),
+	[RC5T583_IRQ_ACOK]		= RC5T583_IRQ(SYS_INT,  0, 1, 1, 0),
+	[RC5T583_IRQ_LIDOPEN]		= RC5T583_IRQ(SYS_INT,  0, 2, 2, 0),
+	[RC5T583_IRQ_PREOT]		= RC5T583_IRQ(SYS_INT,  0, 3, 3, 0),
+	[RC5T583_IRQ_CLKSTP]		= RC5T583_IRQ(SYS_INT,  0, 4, 4, 0),
+	[RC5T583_IRQ_ONKEY_OFF]		= RC5T583_IRQ(SYS_INT,  0, 5, 5, 0),
+	[RC5T583_IRQ_WD]		= RC5T583_IRQ(SYS_INT,  0, 7, 7, 0),
+	[RC5T583_IRQ_EN_PWRREQ1]	= RC5T583_IRQ(SYS_INT,  0, 8, 0, 1),
+	[RC5T583_IRQ_EN_PWRREQ2]	= RC5T583_IRQ(SYS_INT,  0, 9, 1, 1),
+	[RC5T583_IRQ_PRE_VINDET]	= RC5T583_IRQ(SYS_INT,  0, 10, 2, 1),
+
+	[RC5T583_IRQ_DC0LIM]		= RC5T583_IRQ(DCDC_INT, 1, 0, 0, 2),
+	[RC5T583_IRQ_DC1LIM]		= RC5T583_IRQ(DCDC_INT, 1, 1, 1, 2),
+	[RC5T583_IRQ_DC2LIM]		= RC5T583_IRQ(DCDC_INT, 1, 2, 2, 2),
+	[RC5T583_IRQ_DC3LIM]		= RC5T583_IRQ(DCDC_INT, 1, 3, 3, 2),
+
+	[RC5T583_IRQ_CTC]		= RC5T583_IRQ(RTC_INT,  2, 0, 0, 3),
+	[RC5T583_IRQ_YALE]		= RC5T583_IRQ(RTC_INT,  2, 5, 5, 3),
+	[RC5T583_IRQ_DALE]		= RC5T583_IRQ(RTC_INT,  2, 6, 6, 3),
+	[RC5T583_IRQ_WALE]		= RC5T583_IRQ(RTC_INT,  2, 7, 7, 3),
+
+	[RC5T583_IRQ_AIN1L]		= RC5T583_IRQ(ADC_INT,  3, 0, 0, 4),
+	[RC5T583_IRQ_AIN2L]		= RC5T583_IRQ(ADC_INT,  3, 1, 1, 4),
+	[RC5T583_IRQ_AIN3L]		= RC5T583_IRQ(ADC_INT,  3, 2, 2, 4),
+	[RC5T583_IRQ_VBATL]		= RC5T583_IRQ(ADC_INT,  3, 3, 3, 4),
+	[RC5T583_IRQ_VIN3L]		= RC5T583_IRQ(ADC_INT,  3, 4, 4, 4),
+	[RC5T583_IRQ_VIN8L]		= RC5T583_IRQ(ADC_INT,  3, 5, 5, 4),
+	[RC5T583_IRQ_AIN1H]		= RC5T583_IRQ(ADC_INT,  3, 6, 0, 5),
+	[RC5T583_IRQ_AIN2H]		= RC5T583_IRQ(ADC_INT,  3, 7, 1, 5),
+	[RC5T583_IRQ_AIN3H]		= RC5T583_IRQ(ADC_INT,  3, 8, 2, 5),
+	[RC5T583_IRQ_VBATH]		= RC5T583_IRQ(ADC_INT,  3, 9, 3, 5),
+	[RC5T583_IRQ_VIN3H]		= RC5T583_IRQ(ADC_INT,  3, 10, 4, 5),
+	[RC5T583_IRQ_VIN8H]		= RC5T583_IRQ(ADC_INT,  3, 11, 5, 5),
+	[RC5T583_IRQ_ADCEND]		= RC5T583_IRQ(ADC_INT,  3, 12, 0, 6),
+
+	[RC5T583_IRQ_GPIO0]		= RC5T583_IRQ(GPIO_INT, 4, 0, 0, 7),
+	[RC5T583_IRQ_GPIO1]		= RC5T583_IRQ(GPIO_INT, 4, 1, 1, 7),
+	[RC5T583_IRQ_GPIO2]		= RC5T583_IRQ(GPIO_INT, 4, 2, 2, 7),
+	[RC5T583_IRQ_GPIO3]		= RC5T583_IRQ(GPIO_INT, 4, 3, 3, 7),
+	[RC5T583_IRQ_GPIO4]		= RC5T583_IRQ(GPIO_INT, 4, 4, 4, 7),
+	[RC5T583_IRQ_GPIO5]		= RC5T583_IRQ(GPIO_INT, 4, 5, 5, 7),
+	[RC5T583_IRQ_GPIO6]		= RC5T583_IRQ(GPIO_INT, 4, 6, 6, 7),
+	[RC5T583_IRQ_GPIO7]		= RC5T583_IRQ(GPIO_INT, 4, 7, 7, 7),
+};
+
+static void rc5t583_irq_lock(struct irq_data *irq_data)
+{
+	struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data);
+	mutex_lock(&rc5t583->irq_lock);
+}
+
+static void rc5t583_irq_unmask(struct irq_data *irq_data)
+{
+	struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data);
+	unsigned int __irq = irq_data->irq - rc5t583->irq_base;
+	const struct rc5t583_irq_data *data = &rc5t583_irqs[__irq];
+
+	rc5t583->group_irq_en[data->grp_index] |= 1 << data->grp_index;
+	rc5t583->intc_inten_reg |= 1 << data->master_bit;
+	rc5t583->irq_en_reg[data->mask_reg_index] |= 1 << data->int_en_bit;
+}
+
+static void rc5t583_irq_mask(struct irq_data *irq_data)
+{
+	struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data);
+	unsigned int __irq = irq_data->irq - rc5t583->irq_base;
+	const struct rc5t583_irq_data *data = &rc5t583_irqs[__irq];
+
+	rc5t583->group_irq_en[data->grp_index] &= ~(1 << data->grp_index);
+	if (!rc5t583->group_irq_en[data->grp_index])
+		rc5t583->intc_inten_reg &= ~(1 << data->master_bit);
+
+	rc5t583->irq_en_reg[data->mask_reg_index] &= ~(1 << data->int_en_bit);
+}
+
+static int rc5t583_irq_set_type(struct irq_data *irq_data, unsigned int type)
+{
+	struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data);
+	unsigned int __irq = irq_data->irq - rc5t583->irq_base;
+	const struct rc5t583_irq_data *data = &rc5t583_irqs[__irq];
+	int val = 0;
+	int gpedge_index;
+	int gpedge_bit_pos;
+
+	/* Supporting only trigger level inetrrupt */
+	if ((data->int_type & GPIO_INT) && (type & IRQ_TYPE_EDGE_BOTH)) {
+		gpedge_index = data->int_en_bit / 4;
+		gpedge_bit_pos = data->int_en_bit % 4;
+
+		if (type & IRQ_TYPE_EDGE_FALLING)
+			val |= 0x2;
+
+		if (type & IRQ_TYPE_EDGE_RISING)
+			val |= 0x1;
+
+		rc5t583->gpedge_reg[gpedge_index] &= ~(3 << gpedge_bit_pos);
+		rc5t583->gpedge_reg[gpedge_index] |= (val << gpedge_bit_pos);
+		rc5t583_irq_unmask(irq_data);
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static void rc5t583_irq_sync_unlock(struct irq_data *irq_data)
+{
+	struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data);
+	int i;
+	int ret;
+
+	for (i = 0; i < ARRAY_SIZE(rc5t583->gpedge_reg); i++) {
+		ret = rc5t583_write(rc5t583->dev, gpedge_add[i],
+				rc5t583->gpedge_reg[i]);
+		if (ret < 0)
+			dev_warn(rc5t583->dev,
+				"Error in writing reg 0x%02x error: %d\n",
+				gpedge_add[i], ret);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(rc5t583->irq_en_reg); i++) {
+		ret = rc5t583_write(rc5t583->dev, irq_en_add[i],
+					rc5t583->irq_en_reg[i]);
+		if (ret < 0)
+			dev_warn(rc5t583->dev,
+				"Error in writing reg 0x%02x error: %d\n",
+				irq_en_add[i], ret);
+	}
+
+	ret = rc5t583_write(rc5t583->dev, RC5T583_INTC_INTEN,
+				rc5t583->intc_inten_reg);
+	if (ret < 0)
+		dev_warn(rc5t583->dev,
+			"Error in writing reg 0x%02x error: %d\n",
+			RC5T583_INTC_INTEN, ret);
+
+	mutex_unlock(&rc5t583->irq_lock);
+}
+
+static int rc5t583_irq_set_wake(struct irq_data *irq_data, unsigned int on)
+{
+	struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data);
+	return irq_set_irq_wake(rc5t583->chip_irq, on);
+}
+
+static irqreturn_t rc5t583_irq(int irq, void *data)
+{
+	struct rc5t583 *rc5t583 = data;
+	uint8_t int_sts[RC5T583_MAX_INTERRUPT_MASK_REGS];
+	uint8_t master_int = 0;
+	int i;
+	int ret;
+	unsigned int rtc_int_sts = 0;
+
+	/* Clear the status */
+	for (i = 0; i < RC5T583_MAX_INTERRUPT_MASK_REGS; i++)
+		int_sts[i] = 0;
+
+	ret  = rc5t583_read(rc5t583->dev, RC5T583_INTC_INTMON, &master_int);
+	if (ret < 0) {
+		dev_err(rc5t583->dev,
+			"Error in reading reg 0x%02x error: %d\n",
+			RC5T583_INTC_INTMON, ret);
+		return IRQ_HANDLED;
+	}
+
+	for (i = 0; i < RC5T583_MAX_INTERRUPT_MASK_REGS; ++i) {
+		if (!(master_int & main_int_type[i]))
+			continue;
+
+		ret = rc5t583_read(rc5t583->dev, irq_mon_add[i], &int_sts[i]);
+		if (ret < 0) {
+			dev_warn(rc5t583->dev,
+				"Error in reading reg 0x%02x error: %d\n",
+				irq_mon_add[i], ret);
+			int_sts[i] = 0;
+			continue;
+		}
+
+		if (main_int_type[i] & RTC_INT) {
+			rtc_int_sts = 0;
+			if (int_sts[i] & 0x1)
+				rtc_int_sts |= BIT(6);
+			if (int_sts[i] & 0x2)
+				rtc_int_sts |= BIT(7);
+			if (int_sts[i] & 0x4)
+				rtc_int_sts |= BIT(0);
+			if (int_sts[i] & 0x8)
+				rtc_int_sts |= BIT(5);
+		}
+
+		ret = rc5t583_write(rc5t583->dev, irq_clr_add[i],
+				~int_sts[i]);
+		if (ret < 0)
+			dev_warn(rc5t583->dev,
+				"Error in reading reg 0x%02x error: %d\n",
+				irq_clr_add[i], ret);
+
+		if (main_int_type[i] & RTC_INT)
+			int_sts[i] = rtc_int_sts;
+	}
+
+	/* Merge gpio interrupts for rising and falling case*/
+	int_sts[7] |= int_sts[8];
+
+	/* Call interrupt handler if enabled */
+	for (i = 0; i < RC5T583_MAX_IRQS; ++i) {
+		const struct rc5t583_irq_data *data = &rc5t583_irqs[i];
+		if ((int_sts[data->mask_reg_index] & (1 << data->int_en_bit)) &&
+			(rc5t583->group_irq_en[data->master_bit] &
+					(1 << data->grp_index)))
+			handle_nested_irq(rc5t583->irq_base + i);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static struct irq_chip rc5t583_irq_chip = {
+	.name = "rc5t583-irq",
+	.irq_mask = rc5t583_irq_mask,
+	.irq_unmask = rc5t583_irq_unmask,
+	.irq_bus_lock = rc5t583_irq_lock,
+	.irq_bus_sync_unlock = rc5t583_irq_sync_unlock,
+	.irq_set_type = rc5t583_irq_set_type,
+	.irq_set_wake = pm_sleep_ptr(rc5t583_irq_set_wake),
+};
+
+int rc5t583_irq_init(struct rc5t583 *rc5t583, int irq, int irq_base)
+{
+	int i, ret;
+
+	if (!irq_base) {
+		dev_warn(rc5t583->dev, "No interrupt support on IRQ base\n");
+		return -EINVAL;
+	}
+
+	mutex_init(&rc5t583->irq_lock);
+
+	/* Initailize all int register to 0 */
+	for (i = 0; i < RC5T583_MAX_INTERRUPT_EN_REGS; i++)  {
+		ret = rc5t583_write(rc5t583->dev, irq_en_add[i],
+				rc5t583->irq_en_reg[i]);
+		if (ret < 0)
+			dev_warn(rc5t583->dev,
+				"Error in writing reg 0x%02x error: %d\n",
+				irq_en_add[i], ret);
+	}
+
+	for (i = 0; i < RC5T583_MAX_GPEDGE_REG; i++)  {
+		ret = rc5t583_write(rc5t583->dev, gpedge_add[i],
+				rc5t583->gpedge_reg[i]);
+		if (ret < 0)
+			dev_warn(rc5t583->dev,
+				"Error in writing reg 0x%02x error: %d\n",
+				gpedge_add[i], ret);
+	}
+
+	ret = rc5t583_write(rc5t583->dev, RC5T583_INTC_INTEN, 0x0);
+	if (ret < 0)
+		dev_warn(rc5t583->dev,
+			"Error in writing reg 0x%02x error: %d\n",
+			RC5T583_INTC_INTEN, ret);
+
+	/* Clear all interrupts in case they woke up active. */
+	for (i = 0; i < RC5T583_MAX_INTERRUPT_MASK_REGS; i++)  {
+		ret = rc5t583_write(rc5t583->dev, irq_clr_add[i], 0);
+		if (ret < 0)
+			dev_warn(rc5t583->dev,
+				"Error in writing reg 0x%02x error: %d\n",
+				irq_clr_add[i], ret);
+	}
+
+	rc5t583->irq_base = irq_base;
+	rc5t583->chip_irq = irq;
+
+	for (i = 0; i < RC5T583_MAX_IRQS; i++) {
+		int __irq = i + rc5t583->irq_base;
+		irq_set_chip_data(__irq, rc5t583);
+		irq_set_chip_and_handler(__irq, &rc5t583_irq_chip,
+					 handle_simple_irq);
+		irq_set_nested_thread(__irq, 1);
+		irq_clear_status_flags(__irq, IRQ_NOREQUEST);
+	}
+
+	ret = devm_request_threaded_irq(rc5t583->dev, irq, NULL, rc5t583_irq,
+					IRQF_ONESHOT, "rc5t583", rc5t583);
+	if (ret < 0)
+		dev_err(rc5t583->dev,
+			"Error in registering interrupt error: %d\n", ret);
+	return ret;
+}