Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 291 insertions, 0 deletions

diff --git a/drivers/mfd/rn5t618.c b/drivers/mfd/rn5t618.c
new file mode 100644
index 000000000..2f5923074
--- /dev/null
+++ b/drivers/mfd/rn5t618.c
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MFD core driver for Ricoh RN5T618 PMIC
+ *
+ * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
+ * Copyright (C) 2016 Toradex AG
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/rn5t618.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+
+static const struct mfd_cell rn5t618_cells[] = {
+	{ .name = "rn5t618-regulator" },
+	{ .name = "rn5t618-wdt" },
+};
+
+static const struct mfd_cell rc5t619_cells[] = {
+	{ .name = "rn5t618-adc" },
+	{ .name = "rn5t618-power" },
+	{ .name = "rn5t618-regulator" },
+	{ .name = "rc5t619-rtc" },
+	{ .name = "rn5t618-wdt" },
+};
+
+static bool rn5t618_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case RN5T618_WATCHDOGCNT:
+	case RN5T618_DCIRQ:
+	case RN5T618_ILIMDATAH ... RN5T618_AIN0DATAL:
+	case RN5T618_ADCCNT3:
+	case RN5T618_IR_ADC1 ... RN5T618_IR_ADC3:
+	case RN5T618_IR_GPR:
+	case RN5T618_IR_GPF:
+	case RN5T618_MON_IOIN:
+	case RN5T618_INTMON:
+	case RN5T618_RTC_CTRL1 ... RN5T618_RTC_CTRL2:
+	case RN5T618_RTC_SECONDS ... RN5T618_RTC_YEAR:
+	case RN5T618_CHGCTL1:
+	case RN5T618_REGISET1 ... RN5T618_REGISET2:
+	case RN5T618_CHGSTATE:
+	case RN5T618_CHGCTRL_IRR ... RN5T618_CHGERR_MONI:
+	case RN5T618_GCHGDET:
+	case RN5T618_CONTROL ... RN5T618_CC_AVEREG0:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config rn5t618_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.volatile_reg	= rn5t618_volatile_reg,
+	.max_register	= RN5T618_MAX_REG,
+	.cache_type	= REGCACHE_RBTREE,
+};
+
+static const struct regmap_irq rc5t619_irqs[] = {
+	REGMAP_IRQ_REG(RN5T618_IRQ_SYS, 0, BIT(0)),
+	REGMAP_IRQ_REG(RN5T618_IRQ_DCDC, 0, BIT(1)),
+	REGMAP_IRQ_REG(RN5T618_IRQ_RTC, 0, BIT(2)),
+	REGMAP_IRQ_REG(RN5T618_IRQ_ADC, 0, BIT(3)),
+	REGMAP_IRQ_REG(RN5T618_IRQ_GPIO, 0, BIT(4)),
+	REGMAP_IRQ_REG(RN5T618_IRQ_CHG, 0, BIT(6)),
+};
+
+static const struct regmap_irq_chip rc5t619_irq_chip = {
+	.name = "rc5t619",
+	.irqs = rc5t619_irqs,
+	.num_irqs = ARRAY_SIZE(rc5t619_irqs),
+	.num_regs = 1,
+	.status_base = RN5T618_INTMON,
+	.unmask_base = RN5T618_INTEN,
+};
+
+static struct i2c_client *rn5t618_pm_power_off;
+static struct notifier_block rn5t618_restart_handler;
+
+static int rn5t618_irq_init(struct rn5t618 *rn5t618)
+{
+	const struct regmap_irq_chip *irq_chip = NULL;
+	int ret;
+
+	if (!rn5t618->irq)
+		return 0;
+
+	switch (rn5t618->variant) {
+	case RC5T619:
+		irq_chip = &rc5t619_irq_chip;
+		break;
+	default:
+		dev_err(rn5t618->dev, "Currently no IRQ support for variant %d\n",
+			(int)rn5t618->variant);
+		return -ENOENT;
+	}
+
+	ret = devm_regmap_add_irq_chip(rn5t618->dev, rn5t618->regmap,
+				       rn5t618->irq,
+				       IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+				       0, irq_chip, &rn5t618->irq_data);
+	if (ret)
+		dev_err(rn5t618->dev, "Failed to register IRQ chip\n");
+
+	return ret;
+}
+
+static void rn5t618_trigger_poweroff_sequence(bool repower)
+{
+	int ret;
+
+	/* disable automatic repower-on */
+	ret = i2c_smbus_read_byte_data(rn5t618_pm_power_off, RN5T618_REPCNT);
+	if (ret < 0)
+		goto err;
+
+	ret &= ~RN5T618_REPCNT_REPWRON;
+	if (repower)
+		ret |= RN5T618_REPCNT_REPWRON;
+
+	ret = i2c_smbus_write_byte_data(rn5t618_pm_power_off,
+					RN5T618_REPCNT, (u8)ret);
+	if (ret < 0)
+		goto err;
+
+	/* start power-off sequence */
+	ret = i2c_smbus_read_byte_data(rn5t618_pm_power_off, RN5T618_SLPCNT);
+	if (ret < 0)
+		goto err;
+
+	ret |= RN5T618_SLPCNT_SWPWROFF;
+
+	ret = i2c_smbus_write_byte_data(rn5t618_pm_power_off,
+					RN5T618_SLPCNT, (u8)ret);
+	if (ret < 0)
+		goto err;
+
+	return;
+
+err:
+	dev_alert(&rn5t618_pm_power_off->dev, "Failed to shutdown (err = %d)\n", ret);
+}
+
+static void rn5t618_power_off(void)
+{
+	rn5t618_trigger_poweroff_sequence(false);
+}
+
+static int rn5t618_restart(struct notifier_block *this,
+			    unsigned long mode, void *cmd)
+{
+	rn5t618_trigger_poweroff_sequence(true);
+
+	/*
+	 * Re-power factor detection on PMIC side is not instant. 1ms
+	 * proved to be enough time until reset takes effect.
+	 */
+	mdelay(1);
+
+	return NOTIFY_DONE;
+}
+
+static const struct of_device_id rn5t618_of_match[] = {
+	{ .compatible = "ricoh,rn5t567", .data = (void *)RN5T567 },
+	{ .compatible = "ricoh,rn5t618", .data = (void *)RN5T618 },
+	{ .compatible = "ricoh,rc5t619", .data = (void *)RC5T619 },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rn5t618_of_match);
+
+static int rn5t618_i2c_probe(struct i2c_client *i2c)
+{
+	const struct of_device_id *of_id;
+	struct rn5t618 *priv;
+	int ret;
+
+	of_id = of_match_device(rn5t618_of_match, &i2c->dev);
+	if (!of_id) {
+		dev_err(&i2c->dev, "Failed to find matching DT ID\n");
+		return -EINVAL;
+	}
+
+	priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	i2c_set_clientdata(i2c, priv);
+	priv->variant = (long)of_id->data;
+	priv->irq = i2c->irq;
+	priv->dev = &i2c->dev;
+
+	priv->regmap = devm_regmap_init_i2c(i2c, &rn5t618_regmap_config);
+	if (IS_ERR(priv->regmap)) {
+		ret = PTR_ERR(priv->regmap);
+		dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
+		return ret;
+	}
+
+	if (priv->variant == RC5T619)
+		ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE,
+					   rc5t619_cells,
+					   ARRAY_SIZE(rc5t619_cells),
+					   NULL, 0, NULL);
+	else
+		ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE,
+					   rn5t618_cells,
+					   ARRAY_SIZE(rn5t618_cells),
+					   NULL, 0, NULL);
+	if (ret) {
+		dev_err(&i2c->dev, "failed to add sub-devices: %d\n", ret);
+		return ret;
+	}
+
+	rn5t618_pm_power_off = i2c;
+	if (of_device_is_system_power_controller(i2c->dev.of_node)) {
+		if (!pm_power_off)
+			pm_power_off = rn5t618_power_off;
+		else
+			dev_warn(&i2c->dev, "Poweroff callback already assigned\n");
+	}
+
+	rn5t618_restart_handler.notifier_call = rn5t618_restart;
+	rn5t618_restart_handler.priority = 192;
+
+	ret = register_restart_handler(&rn5t618_restart_handler);
+	if (ret) {
+		dev_err(&i2c->dev, "cannot register restart handler, %d\n", ret);
+		return ret;
+	}
+
+	return rn5t618_irq_init(priv);
+}
+
+static void rn5t618_i2c_remove(struct i2c_client *i2c)
+{
+	if (i2c == rn5t618_pm_power_off) {
+		rn5t618_pm_power_off = NULL;
+		pm_power_off = NULL;
+	}
+
+	unregister_restart_handler(&rn5t618_restart_handler);
+}
+
+static int __maybe_unused rn5t618_i2c_suspend(struct device *dev)
+{
+	struct rn5t618 *priv = dev_get_drvdata(dev);
+
+	if (priv->irq)
+		disable_irq(priv->irq);
+
+	return 0;
+}
+
+static int __maybe_unused rn5t618_i2c_resume(struct device *dev)
+{
+	struct rn5t618 *priv = dev_get_drvdata(dev);
+
+	if (priv->irq)
+		enable_irq(priv->irq);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(rn5t618_i2c_dev_pm_ops,
+			rn5t618_i2c_suspend,
+			rn5t618_i2c_resume);
+
+static struct i2c_driver rn5t618_i2c_driver = {
+	.driver = {
+		.name = "rn5t618",
+		.of_match_table = of_match_ptr(rn5t618_of_match),
+		.pm = &rn5t618_i2c_dev_pm_ops,
+	},
+	.probe_new = rn5t618_i2c_probe,
+	.remove = rn5t618_i2c_remove,
+};
+
+module_i2c_driver(rn5t618_i2c_driver);
+
+MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
+MODULE_DESCRIPTION("Ricoh RN5T567/618 MFD driver");
+MODULE_LICENSE("GPL v2");