Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 563 insertions, 0 deletions

diff --git a/drivers/mfd/stmfx.c b/drivers/mfd/stmfx.c
new file mode 100644
index 000000000..e281971ba
--- /dev/null
+++ b/drivers/mfd/stmfx.c
@@ -0,0 +1,563 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for STMicroelectronics Multi-Function eXpander (STMFX) core
+ *
+ * Copyright (C) 2019 STMicroelectronics
+ * Author(s): Amelie Delaunay <amelie.delaunay@st.com>.
+ */
+#include <linux/bitfield.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/stmfx.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+
+static bool stmfx_reg_volatile(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case STMFX_REG_SYS_CTRL:
+	case STMFX_REG_IRQ_SRC_EN:
+	case STMFX_REG_IRQ_PENDING:
+	case STMFX_REG_IRQ_GPI_PENDING1:
+	case STMFX_REG_IRQ_GPI_PENDING2:
+	case STMFX_REG_IRQ_GPI_PENDING3:
+	case STMFX_REG_GPIO_STATE1:
+	case STMFX_REG_GPIO_STATE2:
+	case STMFX_REG_GPIO_STATE3:
+	case STMFX_REG_IRQ_GPI_SRC1:
+	case STMFX_REG_IRQ_GPI_SRC2:
+	case STMFX_REG_IRQ_GPI_SRC3:
+	case STMFX_REG_GPO_SET1:
+	case STMFX_REG_GPO_SET2:
+	case STMFX_REG_GPO_SET3:
+	case STMFX_REG_GPO_CLR1:
+	case STMFX_REG_GPO_CLR2:
+	case STMFX_REG_GPO_CLR3:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool stmfx_reg_writeable(struct device *dev, unsigned int reg)
+{
+	return (reg >= STMFX_REG_SYS_CTRL);
+}
+
+static const struct regmap_config stmfx_regmap_config = {
+	.reg_bits	= 8,
+	.reg_stride	= 1,
+	.val_bits	= 8,
+	.max_register	= STMFX_REG_MAX,
+	.volatile_reg	= stmfx_reg_volatile,
+	.writeable_reg	= stmfx_reg_writeable,
+	.cache_type	= REGCACHE_RBTREE,
+};
+
+static const struct resource stmfx_pinctrl_resources[] = {
+	DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_GPIO),
+};
+
+static const struct resource stmfx_idd_resources[] = {
+	DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_IDD),
+	DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_ERROR),
+};
+
+static const struct resource stmfx_ts_resources[] = {
+	DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_DET),
+	DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_NE),
+	DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_TH),
+	DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_FULL),
+	DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_OVF),
+};
+
+static struct mfd_cell stmfx_cells[] = {
+	{
+		.of_compatible = "st,stmfx-0300-pinctrl",
+		.name = "stmfx-pinctrl",
+		.resources = stmfx_pinctrl_resources,
+		.num_resources = ARRAY_SIZE(stmfx_pinctrl_resources),
+	},
+	{
+		.of_compatible = "st,stmfx-0300-idd",
+		.name = "stmfx-idd",
+		.resources = stmfx_idd_resources,
+		.num_resources = ARRAY_SIZE(stmfx_idd_resources),
+	},
+	{
+		.of_compatible = "st,stmfx-0300-ts",
+		.name = "stmfx-ts",
+		.resources = stmfx_ts_resources,
+		.num_resources = ARRAY_SIZE(stmfx_ts_resources),
+	},
+};
+
+static u8 stmfx_func_to_mask(u32 func)
+{
+	u8 mask = 0;
+
+	if (func & STMFX_FUNC_GPIO)
+		mask |= STMFX_REG_SYS_CTRL_GPIO_EN;
+
+	if ((func & STMFX_FUNC_ALTGPIO_LOW) || (func & STMFX_FUNC_ALTGPIO_HIGH))
+		mask |= STMFX_REG_SYS_CTRL_ALTGPIO_EN;
+
+	if (func & STMFX_FUNC_TS)
+		mask |= STMFX_REG_SYS_CTRL_TS_EN;
+
+	if (func & STMFX_FUNC_IDD)
+		mask |= STMFX_REG_SYS_CTRL_IDD_EN;
+
+	return mask;
+}
+
+int stmfx_function_enable(struct stmfx *stmfx, u32 func)
+{
+	u32 sys_ctrl;
+	u8 mask;
+	int ret;
+
+	ret = regmap_read(stmfx->map, STMFX_REG_SYS_CTRL, &sys_ctrl);
+	if (ret)
+		return ret;
+
+	/*
+	 * IDD and TS have priority in STMFX FW, so if IDD and TS are enabled,
+	 * ALTGPIO function is disabled by STMFX FW. If IDD or TS is enabled,
+	 * the number of aGPIO available decreases. To avoid GPIO management
+	 * disturbance, abort IDD or TS function enable in this case.
+	 */
+	if (((func & STMFX_FUNC_IDD) || (func & STMFX_FUNC_TS)) &&
+	    (sys_ctrl & STMFX_REG_SYS_CTRL_ALTGPIO_EN)) {
+		dev_err(stmfx->dev, "ALTGPIO function already enabled\n");
+		return -EBUSY;
+	}
+
+	/* If TS is enabled, aGPIO[3:0] cannot be used */
+	if ((func & STMFX_FUNC_ALTGPIO_LOW) &&
+	    (sys_ctrl & STMFX_REG_SYS_CTRL_TS_EN)) {
+		dev_err(stmfx->dev, "TS in use, aGPIO[3:0] unavailable\n");
+		return -EBUSY;
+	}
+
+	/* If IDD is enabled, aGPIO[7:4] cannot be used */
+	if ((func & STMFX_FUNC_ALTGPIO_HIGH) &&
+	    (sys_ctrl & STMFX_REG_SYS_CTRL_IDD_EN)) {
+		dev_err(stmfx->dev, "IDD in use, aGPIO[7:4] unavailable\n");
+		return -EBUSY;
+	}
+
+	mask = stmfx_func_to_mask(func);
+
+	return regmap_update_bits(stmfx->map, STMFX_REG_SYS_CTRL, mask, mask);
+}
+EXPORT_SYMBOL_GPL(stmfx_function_enable);
+
+int stmfx_function_disable(struct stmfx *stmfx, u32 func)
+{
+	u8 mask = stmfx_func_to_mask(func);
+
+	return regmap_update_bits(stmfx->map, STMFX_REG_SYS_CTRL, mask, 0);
+}
+EXPORT_SYMBOL_GPL(stmfx_function_disable);
+
+static void stmfx_irq_bus_lock(struct irq_data *data)
+{
+	struct stmfx *stmfx = irq_data_get_irq_chip_data(data);
+
+	mutex_lock(&stmfx->lock);
+}
+
+static void stmfx_irq_bus_sync_unlock(struct irq_data *data)
+{
+	struct stmfx *stmfx = irq_data_get_irq_chip_data(data);
+
+	regmap_write(stmfx->map, STMFX_REG_IRQ_SRC_EN, stmfx->irq_src);
+
+	mutex_unlock(&stmfx->lock);
+}
+
+static void stmfx_irq_mask(struct irq_data *data)
+{
+	struct stmfx *stmfx = irq_data_get_irq_chip_data(data);
+
+	stmfx->irq_src &= ~BIT(data->hwirq % 8);
+}
+
+static void stmfx_irq_unmask(struct irq_data *data)
+{
+	struct stmfx *stmfx = irq_data_get_irq_chip_data(data);
+
+	stmfx->irq_src |= BIT(data->hwirq % 8);
+}
+
+static struct irq_chip stmfx_irq_chip = {
+	.name			= "stmfx-core",
+	.irq_bus_lock		= stmfx_irq_bus_lock,
+	.irq_bus_sync_unlock	= stmfx_irq_bus_sync_unlock,
+	.irq_mask		= stmfx_irq_mask,
+	.irq_unmask		= stmfx_irq_unmask,
+};
+
+static irqreturn_t stmfx_irq_handler(int irq, void *data)
+{
+	struct stmfx *stmfx = data;
+	unsigned long bits;
+	u32 pending, ack;
+	int n, ret;
+
+	ret = regmap_read(stmfx->map, STMFX_REG_IRQ_PENDING, &pending);
+	if (ret)
+		return IRQ_NONE;
+
+	/*
+	 * There is no ACK for GPIO, MFX_REG_IRQ_PENDING_GPIO is a logical OR
+	 * of MFX_REG_IRQ_GPI _PENDING1/_PENDING2/_PENDING3
+	 */
+	ack = pending & ~BIT(STMFX_REG_IRQ_SRC_EN_GPIO);
+	if (ack) {
+		ret = regmap_write(stmfx->map, STMFX_REG_IRQ_ACK, ack);
+		if (ret)
+			return IRQ_NONE;
+	}
+
+	bits = pending;
+	for_each_set_bit(n, &bits, STMFX_REG_IRQ_SRC_MAX)
+		handle_nested_irq(irq_find_mapping(stmfx->irq_domain, n));
+
+	return IRQ_HANDLED;
+}
+
+static int stmfx_irq_map(struct irq_domain *d, unsigned int virq,
+			 irq_hw_number_t hwirq)
+{
+	irq_set_chip_data(virq, d->host_data);
+	irq_set_chip_and_handler(virq, &stmfx_irq_chip, handle_simple_irq);
+	irq_set_nested_thread(virq, 1);
+	irq_set_noprobe(virq);
+
+	return 0;
+}
+
+static void stmfx_irq_unmap(struct irq_domain *d, unsigned int virq)
+{
+	irq_set_chip_and_handler(virq, NULL, NULL);
+	irq_set_chip_data(virq, NULL);
+}
+
+static const struct irq_domain_ops stmfx_irq_ops = {
+	.map	= stmfx_irq_map,
+	.unmap	= stmfx_irq_unmap,
+};
+
+static void stmfx_irq_exit(struct i2c_client *client)
+{
+	struct stmfx *stmfx = i2c_get_clientdata(client);
+	int hwirq;
+
+	for (hwirq = 0; hwirq < STMFX_REG_IRQ_SRC_MAX; hwirq++)
+		irq_dispose_mapping(irq_find_mapping(stmfx->irq_domain, hwirq));
+
+	irq_domain_remove(stmfx->irq_domain);
+}
+
+static int stmfx_irq_init(struct i2c_client *client)
+{
+	struct stmfx *stmfx = i2c_get_clientdata(client);
+	u32 irqoutpin = 0, irqtrigger;
+	int ret;
+
+	stmfx->irq_domain = irq_domain_add_simple(stmfx->dev->of_node,
+						  STMFX_REG_IRQ_SRC_MAX, 0,
+						  &stmfx_irq_ops, stmfx);
+	if (!stmfx->irq_domain) {
+		dev_err(stmfx->dev, "Failed to create IRQ domain\n");
+		return -EINVAL;
+	}
+
+	if (!of_property_read_bool(stmfx->dev->of_node, "drive-open-drain"))
+		irqoutpin |= STMFX_REG_IRQ_OUT_PIN_TYPE;
+
+	irqtrigger = irq_get_trigger_type(client->irq);
+	if ((irqtrigger & IRQ_TYPE_EDGE_RISING) ||
+	    (irqtrigger & IRQ_TYPE_LEVEL_HIGH))
+		irqoutpin |= STMFX_REG_IRQ_OUT_PIN_POL;
+
+	ret = regmap_write(stmfx->map, STMFX_REG_IRQ_OUT_PIN, irqoutpin);
+	if (ret)
+		goto irq_exit;
+
+	ret = devm_request_threaded_irq(stmfx->dev, client->irq,
+					NULL, stmfx_irq_handler,
+					irqtrigger | IRQF_ONESHOT,
+					"stmfx", stmfx);
+	if (ret)
+		goto irq_exit;
+
+	stmfx->irq = client->irq;
+
+	return 0;
+
+irq_exit:
+	stmfx_irq_exit(client);
+
+	return ret;
+}
+
+static int stmfx_chip_reset(struct stmfx *stmfx)
+{
+	int ret;
+
+	ret = regmap_write(stmfx->map, STMFX_REG_SYS_CTRL,
+			   STMFX_REG_SYS_CTRL_SWRST);
+	if (ret)
+		return ret;
+
+	msleep(STMFX_BOOT_TIME_MS);
+
+	return ret;
+}
+
+static int stmfx_chip_init(struct i2c_client *client)
+{
+	struct stmfx *stmfx = i2c_get_clientdata(client);
+	u32 id;
+	u8 version[2];
+	int ret;
+
+	stmfx->vdd = devm_regulator_get_optional(&client->dev, "vdd");
+	ret = PTR_ERR_OR_ZERO(stmfx->vdd);
+	if (ret) {
+		if (ret == -ENODEV)
+			stmfx->vdd = NULL;
+		else
+			return dev_err_probe(&client->dev, ret, "Failed to get VDD regulator\n");
+	}
+
+	if (stmfx->vdd) {
+		ret = regulator_enable(stmfx->vdd);
+		if (ret) {
+			dev_err(&client->dev, "VDD enable failed: %d\n", ret);
+			return ret;
+		}
+	}
+
+	ret = regmap_read(stmfx->map, STMFX_REG_CHIP_ID, &id);
+	if (ret) {
+		dev_err(&client->dev, "Error reading chip ID: %d\n", ret);
+		goto err;
+	}
+
+	/*
+	 * Check that ID is the complement of the I2C address:
+	 * STMFX I2C address follows the 7-bit format (MSB), that's why
+	 * client->addr is shifted.
+	 *
+	 * STMFX_I2C_ADDR|       STMFX         |        Linux
+	 *   input pin   | I2C device address  | I2C device address
+	 *---------------------------------------------------------
+	 *       0       | b: 1000 010x h:0x84 |       0x42
+	 *       1       | b: 1000 011x h:0x86 |       0x43
+	 */
+	if (FIELD_GET(STMFX_REG_CHIP_ID_MASK, ~id) != (client->addr << 1)) {
+		dev_err(&client->dev, "Unknown chip ID: %#x\n", id);
+		ret = -EINVAL;
+		goto err;
+	}
+
+	ret = regmap_bulk_read(stmfx->map, STMFX_REG_FW_VERSION_MSB,
+			       version, ARRAY_SIZE(version));
+	if (ret) {
+		dev_err(&client->dev, "Error reading FW version: %d\n", ret);
+		goto err;
+	}
+
+	dev_info(&client->dev, "STMFX id: %#x, fw version: %x.%02x\n",
+		 id, version[0], version[1]);
+
+	ret = stmfx_chip_reset(stmfx);
+	if (ret) {
+		dev_err(&client->dev, "Failed to reset chip: %d\n", ret);
+		goto err;
+	}
+
+	return 0;
+
+err:
+	if (stmfx->vdd)
+		return regulator_disable(stmfx->vdd);
+
+	return ret;
+}
+
+static void stmfx_chip_exit(struct i2c_client *client)
+{
+	struct stmfx *stmfx = i2c_get_clientdata(client);
+
+	regmap_write(stmfx->map, STMFX_REG_IRQ_SRC_EN, 0);
+	regmap_write(stmfx->map, STMFX_REG_SYS_CTRL, 0);
+
+	if (stmfx->vdd) {
+		int ret;
+
+		ret = regulator_disable(stmfx->vdd);
+		if (ret)
+			dev_err(&client->dev,
+				"Failed to disable vdd regulator: %pe\n",
+				ERR_PTR(ret));
+	}
+}
+
+static int stmfx_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct stmfx *stmfx;
+	int ret;
+
+	stmfx = devm_kzalloc(dev, sizeof(*stmfx), GFP_KERNEL);
+	if (!stmfx)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, stmfx);
+
+	stmfx->dev = dev;
+
+	stmfx->map = devm_regmap_init_i2c(client, &stmfx_regmap_config);
+	if (IS_ERR(stmfx->map)) {
+		ret = PTR_ERR(stmfx->map);
+		dev_err(dev, "Failed to allocate register map: %d\n", ret);
+		return ret;
+	}
+
+	mutex_init(&stmfx->lock);
+
+	ret = stmfx_chip_init(client);
+	if (ret) {
+		if (ret == -ETIMEDOUT)
+			return -EPROBE_DEFER;
+		return ret;
+	}
+
+	if (client->irq < 0) {
+		dev_err(dev, "Failed to get IRQ: %d\n", client->irq);
+		ret = client->irq;
+		goto err_chip_exit;
+	}
+
+	ret = stmfx_irq_init(client);
+	if (ret)
+		goto err_chip_exit;
+
+	ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
+				   stmfx_cells, ARRAY_SIZE(stmfx_cells), NULL,
+				   0, stmfx->irq_domain);
+	if (ret)
+		goto err_irq_exit;
+
+	return 0;
+
+err_irq_exit:
+	stmfx_irq_exit(client);
+err_chip_exit:
+	stmfx_chip_exit(client);
+
+	return ret;
+}
+
+static void stmfx_remove(struct i2c_client *client)
+{
+	stmfx_irq_exit(client);
+
+	stmfx_chip_exit(client);
+}
+
+static int stmfx_suspend(struct device *dev)
+{
+	struct stmfx *stmfx = dev_get_drvdata(dev);
+	int ret;
+
+	ret = regmap_raw_read(stmfx->map, STMFX_REG_SYS_CTRL,
+			      &stmfx->bkp_sysctrl, sizeof(stmfx->bkp_sysctrl));
+	if (ret)
+		return ret;
+
+	ret = regmap_raw_read(stmfx->map, STMFX_REG_IRQ_OUT_PIN,
+			      &stmfx->bkp_irqoutpin,
+			      sizeof(stmfx->bkp_irqoutpin));
+	if (ret)
+		return ret;
+
+	disable_irq(stmfx->irq);
+
+	if (stmfx->vdd)
+		return regulator_disable(stmfx->vdd);
+
+	return 0;
+}
+
+static int stmfx_resume(struct device *dev)
+{
+	struct stmfx *stmfx = dev_get_drvdata(dev);
+	int ret;
+
+	if (stmfx->vdd) {
+		ret = regulator_enable(stmfx->vdd);
+		if (ret) {
+			dev_err(stmfx->dev,
+				"VDD enable failed: %d\n", ret);
+			return ret;
+		}
+	}
+
+	/* Reset STMFX - supply has been stopped during suspend */
+	ret = stmfx_chip_reset(stmfx);
+	if (ret) {
+		dev_err(stmfx->dev, "Failed to reset chip: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_raw_write(stmfx->map, STMFX_REG_SYS_CTRL,
+			       &stmfx->bkp_sysctrl, sizeof(stmfx->bkp_sysctrl));
+	if (ret)
+		return ret;
+
+	ret = regmap_raw_write(stmfx->map, STMFX_REG_IRQ_OUT_PIN,
+			       &stmfx->bkp_irqoutpin,
+			       sizeof(stmfx->bkp_irqoutpin));
+	if (ret)
+		return ret;
+
+	ret = regmap_raw_write(stmfx->map, STMFX_REG_IRQ_SRC_EN,
+			       &stmfx->irq_src, sizeof(stmfx->irq_src));
+	if (ret)
+		return ret;
+
+	enable_irq(stmfx->irq);
+
+	return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(stmfx_dev_pm_ops, stmfx_suspend, stmfx_resume);
+
+static const struct of_device_id stmfx_of_match[] = {
+	{ .compatible = "st,stmfx-0300", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, stmfx_of_match);
+
+static struct i2c_driver stmfx_driver = {
+	.driver = {
+		.name = "stmfx-core",
+		.of_match_table = stmfx_of_match,
+		.pm = pm_sleep_ptr(&stmfx_dev_pm_ops),
+	},
+	.probe_new = stmfx_probe,
+	.remove = stmfx_remove,
+};
+module_i2c_driver(stmfx_driver);
+
+MODULE_DESCRIPTION("STMFX core driver");
+MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>");
+MODULE_LICENSE("GPL v2");