Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 842 insertions, 0 deletions

diff --git a/drivers/mfd/twl6040.c b/drivers/mfd/twl6040.c
new file mode 100644
index 000000000..fc97fa5a2
--- /dev/null
+++ b/drivers/mfd/twl6040.c
@@ -0,0 +1,842 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MFD driver for TWL6040 audio device
+ *
+ * Authors:	Misael Lopez Cruz <misael.lopez@ti.com>
+ *		Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
+ *		Peter Ujfalusi <peter.ujfalusi@ti.com>
+ *
+ * Copyright:	(C) 2011 Texas Instruments, Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/gpio/consumer.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/twl6040.h>
+#include <linux/regulator/consumer.h>
+
+#define VIBRACTRL_MEMBER(reg) ((reg == TWL6040_REG_VIBCTLL) ? 0 : 1)
+#define TWL6040_NUM_SUPPLIES	(2)
+
+static const struct reg_default twl6040_defaults[] = {
+	{ 0x01, 0x4B }, /* REG_ASICID	(ro) */
+	{ 0x02, 0x00 }, /* REG_ASICREV	(ro) */
+	{ 0x03, 0x00 }, /* REG_INTID	*/
+	{ 0x04, 0x00 }, /* REG_INTMR	*/
+	{ 0x05, 0x00 }, /* REG_NCPCTRL	*/
+	{ 0x06, 0x00 }, /* REG_LDOCTL	*/
+	{ 0x07, 0x60 }, /* REG_HPPLLCTL	*/
+	{ 0x08, 0x00 }, /* REG_LPPLLCTL	*/
+	{ 0x09, 0x4A }, /* REG_LPPLLDIV	*/
+	{ 0x0A, 0x00 }, /* REG_AMICBCTL	*/
+	{ 0x0B, 0x00 }, /* REG_DMICBCTL	*/
+	{ 0x0C, 0x00 }, /* REG_MICLCTL	*/
+	{ 0x0D, 0x00 }, /* REG_MICRCTL	*/
+	{ 0x0E, 0x00 }, /* REG_MICGAIN	*/
+	{ 0x0F, 0x1B }, /* REG_LINEGAIN	*/
+	{ 0x10, 0x00 }, /* REG_HSLCTL	*/
+	{ 0x11, 0x00 }, /* REG_HSRCTL	*/
+	{ 0x12, 0x00 }, /* REG_HSGAIN	*/
+	{ 0x13, 0x00 }, /* REG_EARCTL	*/
+	{ 0x14, 0x00 }, /* REG_HFLCTL	*/
+	{ 0x15, 0x00 }, /* REG_HFLGAIN	*/
+	{ 0x16, 0x00 }, /* REG_HFRCTL	*/
+	{ 0x17, 0x00 }, /* REG_HFRGAIN	*/
+	{ 0x18, 0x00 }, /* REG_VIBCTLL	*/
+	{ 0x19, 0x00 }, /* REG_VIBDATL	*/
+	{ 0x1A, 0x00 }, /* REG_VIBCTLR	*/
+	{ 0x1B, 0x00 }, /* REG_VIBDATR	*/
+	{ 0x1C, 0x00 }, /* REG_HKCTL1	*/
+	{ 0x1D, 0x00 }, /* REG_HKCTL2	*/
+	{ 0x1E, 0x00 }, /* REG_GPOCTL	*/
+	{ 0x1F, 0x00 }, /* REG_ALB	*/
+	{ 0x20, 0x00 }, /* REG_DLB	*/
+	/* 0x28, REG_TRIM1 */
+	/* 0x29, REG_TRIM2 */
+	/* 0x2A, REG_TRIM3 */
+	/* 0x2B, REG_HSOTRIM */
+	/* 0x2C, REG_HFOTRIM */
+	{ 0x2D, 0x08 }, /* REG_ACCCTL	*/
+	{ 0x2E, 0x00 }, /* REG_STATUS	(ro) */
+};
+
+static struct reg_sequence twl6040_patch[] = {
+	/*
+	 * Select I2C bus access to dual access registers
+	 * Interrupt register is cleared on read
+	 * Select fast mode for i2c (400KHz)
+	 */
+	{ TWL6040_REG_ACCCTL,
+		TWL6040_I2CSEL | TWL6040_INTCLRMODE | TWL6040_I2CMODE(1) },
+};
+
+
+static bool twl6040_has_vibra(struct device_node *parent)
+{
+	struct device_node *node;
+
+	node = of_get_child_by_name(parent, "vibra");
+	if (node) {
+		of_node_put(node);
+		return true;
+	}
+
+	return false;
+}
+
+int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg)
+{
+	int ret;
+	unsigned int val;
+
+	ret = regmap_read(twl6040->regmap, reg, &val);
+	if (ret < 0)
+		return ret;
+
+	return val;
+}
+EXPORT_SYMBOL(twl6040_reg_read);
+
+int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg, u8 val)
+{
+	int ret;
+
+	ret = regmap_write(twl6040->regmap, reg, val);
+
+	return ret;
+}
+EXPORT_SYMBOL(twl6040_reg_write);
+
+int twl6040_set_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask)
+{
+	return regmap_update_bits(twl6040->regmap, reg, mask, mask);
+}
+EXPORT_SYMBOL(twl6040_set_bits);
+
+int twl6040_clear_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask)
+{
+	return regmap_update_bits(twl6040->regmap, reg, mask, 0);
+}
+EXPORT_SYMBOL(twl6040_clear_bits);
+
+/* twl6040 codec manual power-up sequence */
+static int twl6040_power_up_manual(struct twl6040 *twl6040)
+{
+	u8 ldoctl, ncpctl, lppllctl;
+	int ret;
+
+	/* enable high-side LDO, reference system and internal oscillator */
+	ldoctl = TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA;
+	ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
+	if (ret)
+		return ret;
+	usleep_range(10000, 10500);
+
+	/* enable negative charge pump */
+	ncpctl = TWL6040_NCPENA;
+	ret = twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
+	if (ret)
+		goto ncp_err;
+	usleep_range(1000, 1500);
+
+	/* enable low-side LDO */
+	ldoctl |= TWL6040_LSLDOENA;
+	ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
+	if (ret)
+		goto lsldo_err;
+	usleep_range(1000, 1500);
+
+	/* enable low-power PLL */
+	lppllctl = TWL6040_LPLLENA;
+	ret = twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
+	if (ret)
+		goto lppll_err;
+	usleep_range(5000, 5500);
+
+	/* disable internal oscillator */
+	ldoctl &= ~TWL6040_OSCENA;
+	ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
+	if (ret)
+		goto osc_err;
+
+	return 0;
+
+osc_err:
+	lppllctl &= ~TWL6040_LPLLENA;
+	twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
+lppll_err:
+	ldoctl &= ~TWL6040_LSLDOENA;
+	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
+lsldo_err:
+	ncpctl &= ~TWL6040_NCPENA;
+	twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
+ncp_err:
+	ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA);
+	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
+
+	dev_err(twl6040->dev, "manual power-up failed\n");
+	return ret;
+}
+
+/* twl6040 manual power-down sequence */
+static void twl6040_power_down_manual(struct twl6040 *twl6040)
+{
+	u8 ncpctl, ldoctl, lppllctl;
+
+	ncpctl = twl6040_reg_read(twl6040, TWL6040_REG_NCPCTL);
+	ldoctl = twl6040_reg_read(twl6040, TWL6040_REG_LDOCTL);
+	lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL);
+
+	/* enable internal oscillator */
+	ldoctl |= TWL6040_OSCENA;
+	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
+	usleep_range(1000, 1500);
+
+	/* disable low-power PLL */
+	lppllctl &= ~TWL6040_LPLLENA;
+	twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
+
+	/* disable low-side LDO */
+	ldoctl &= ~TWL6040_LSLDOENA;
+	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
+
+	/* disable negative charge pump */
+	ncpctl &= ~TWL6040_NCPENA;
+	twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl);
+
+	/* disable high-side LDO, reference system and internal oscillator */
+	ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA);
+	twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl);
+}
+
+static irqreturn_t twl6040_readyint_handler(int irq, void *data)
+{
+	struct twl6040 *twl6040 = data;
+
+	complete(&twl6040->ready);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t twl6040_thint_handler(int irq, void *data)
+{
+	struct twl6040 *twl6040 = data;
+	u8 status;
+
+	status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS);
+	if (status & TWL6040_TSHUTDET) {
+		dev_warn(twl6040->dev, "Thermal shutdown, powering-off");
+		twl6040_power(twl6040, 0);
+	} else {
+		dev_warn(twl6040->dev, "Leaving thermal shutdown, powering-on");
+		twl6040_power(twl6040, 1);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int twl6040_power_up_automatic(struct twl6040 *twl6040)
+{
+	int time_left;
+
+	gpiod_set_value_cansleep(twl6040->audpwron, 1);
+
+	time_left = wait_for_completion_timeout(&twl6040->ready,
+						msecs_to_jiffies(144));
+	if (!time_left) {
+		u8 intid;
+
+		dev_warn(twl6040->dev, "timeout waiting for READYINT\n");
+		intid = twl6040_reg_read(twl6040, TWL6040_REG_INTID);
+		if (!(intid & TWL6040_READYINT)) {
+			dev_err(twl6040->dev, "automatic power-up failed\n");
+			gpiod_set_value_cansleep(twl6040->audpwron, 0);
+			return -ETIMEDOUT;
+		}
+	}
+
+	return 0;
+}
+
+int twl6040_power(struct twl6040 *twl6040, int on)
+{
+	int ret = 0;
+
+	mutex_lock(&twl6040->mutex);
+
+	if (on) {
+		/* already powered-up */
+		if (twl6040->power_count++)
+			goto out;
+
+		ret = clk_prepare_enable(twl6040->clk32k);
+		if (ret) {
+			twl6040->power_count = 0;
+			goto out;
+		}
+
+		/* Allow writes to the chip */
+		regcache_cache_only(twl6040->regmap, false);
+
+		if (twl6040->audpwron) {
+			/* use automatic power-up sequence */
+			ret = twl6040_power_up_automatic(twl6040);
+			if (ret) {
+				clk_disable_unprepare(twl6040->clk32k);
+				twl6040->power_count = 0;
+				goto out;
+			}
+		} else {
+			/* use manual power-up sequence */
+			ret = twl6040_power_up_manual(twl6040);
+			if (ret) {
+				clk_disable_unprepare(twl6040->clk32k);
+				twl6040->power_count = 0;
+				goto out;
+			}
+		}
+
+		/*
+		 * Register access can produce errors after power-up unless we
+		 * wait at least 8ms based on measurements on duovero.
+		 */
+		usleep_range(10000, 12000);
+
+		/* Sync with the HW */
+		ret = regcache_sync(twl6040->regmap);
+		if (ret) {
+			dev_err(twl6040->dev, "Failed to sync with the HW: %i\n",
+				ret);
+			goto out;
+		}
+
+		/* Default PLL configuration after power up */
+		twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL;
+		twl6040->sysclk_rate = 19200000;
+	} else {
+		/* already powered-down */
+		if (!twl6040->power_count) {
+			dev_err(twl6040->dev,
+				"device is already powered-off\n");
+			ret = -EPERM;
+			goto out;
+		}
+
+		if (--twl6040->power_count)
+			goto out;
+
+		if (twl6040->audpwron) {
+			/* use AUDPWRON line */
+			gpiod_set_value_cansleep(twl6040->audpwron, 0);
+
+			/* power-down sequence latency */
+			usleep_range(500, 700);
+		} else {
+			/* use manual power-down sequence */
+			twl6040_power_down_manual(twl6040);
+		}
+
+		/* Set regmap to cache only and mark it as dirty */
+		regcache_cache_only(twl6040->regmap, true);
+		regcache_mark_dirty(twl6040->regmap);
+
+		twl6040->sysclk_rate = 0;
+
+		if (twl6040->pll == TWL6040_SYSCLK_SEL_HPPLL) {
+			clk_disable_unprepare(twl6040->mclk);
+			twl6040->mclk_rate = 0;
+		}
+
+		clk_disable_unprepare(twl6040->clk32k);
+	}
+
+out:
+	mutex_unlock(&twl6040->mutex);
+	return ret;
+}
+EXPORT_SYMBOL(twl6040_power);
+
+int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
+		    unsigned int freq_in, unsigned int freq_out)
+{
+	u8 hppllctl, lppllctl;
+	int ret = 0;
+
+	mutex_lock(&twl6040->mutex);
+
+	hppllctl = twl6040_reg_read(twl6040, TWL6040_REG_HPPLLCTL);
+	lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL);
+
+	/* Force full reconfiguration when switching between PLL */
+	if (pll_id != twl6040->pll) {
+		twl6040->sysclk_rate = 0;
+		twl6040->mclk_rate = 0;
+	}
+
+	switch (pll_id) {
+	case TWL6040_SYSCLK_SEL_LPPLL:
+		/* low-power PLL divider */
+		/* Change the sysclk configuration only if it has been canged */
+		if (twl6040->sysclk_rate != freq_out) {
+			switch (freq_out) {
+			case 17640000:
+				lppllctl |= TWL6040_LPLLFIN;
+				break;
+			case 19200000:
+				lppllctl &= ~TWL6040_LPLLFIN;
+				break;
+			default:
+				dev_err(twl6040->dev,
+					"freq_out %d not supported\n",
+					freq_out);
+				ret = -EINVAL;
+				goto pll_out;
+			}
+			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
+					  lppllctl);
+		}
+
+		/* The PLL in use has not been change, we can exit */
+		if (twl6040->pll == pll_id)
+			break;
+
+		switch (freq_in) {
+		case 32768:
+			lppllctl |= TWL6040_LPLLENA;
+			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
+					  lppllctl);
+			mdelay(5);
+			lppllctl &= ~TWL6040_HPLLSEL;
+			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
+					  lppllctl);
+			hppllctl &= ~TWL6040_HPLLENA;
+			twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL,
+					  hppllctl);
+			break;
+		default:
+			dev_err(twl6040->dev,
+				"freq_in %d not supported\n", freq_in);
+			ret = -EINVAL;
+			goto pll_out;
+		}
+
+		clk_disable_unprepare(twl6040->mclk);
+		break;
+	case TWL6040_SYSCLK_SEL_HPPLL:
+		/* high-performance PLL can provide only 19.2 MHz */
+		if (freq_out != 19200000) {
+			dev_err(twl6040->dev,
+				"freq_out %d not supported\n", freq_out);
+			ret = -EINVAL;
+			goto pll_out;
+		}
+
+		if (twl6040->mclk_rate != freq_in) {
+			hppllctl &= ~TWL6040_MCLK_MSK;
+
+			switch (freq_in) {
+			case 12000000:
+				/* PLL enabled, active mode */
+				hppllctl |= TWL6040_MCLK_12000KHZ |
+					    TWL6040_HPLLENA;
+				break;
+			case 19200000:
+				/* PLL enabled, bypass mode */
+				hppllctl |= TWL6040_MCLK_19200KHZ |
+					    TWL6040_HPLLBP | TWL6040_HPLLENA;
+				break;
+			case 26000000:
+				/* PLL enabled, active mode */
+				hppllctl |= TWL6040_MCLK_26000KHZ |
+					    TWL6040_HPLLENA;
+				break;
+			case 38400000:
+				/* PLL enabled, bypass mode */
+				hppllctl |= TWL6040_MCLK_38400KHZ |
+					    TWL6040_HPLLBP | TWL6040_HPLLENA;
+				break;
+			default:
+				dev_err(twl6040->dev,
+					"freq_in %d not supported\n", freq_in);
+				ret = -EINVAL;
+				goto pll_out;
+			}
+
+			/* When switching to HPPLL, enable the mclk first */
+			if (pll_id != twl6040->pll)
+				clk_prepare_enable(twl6040->mclk);
+			/*
+			 * enable clock slicer to ensure input waveform is
+			 * square
+			 */
+			hppllctl |= TWL6040_HPLLSQRENA;
+
+			twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL,
+					  hppllctl);
+			usleep_range(500, 700);
+			lppllctl |= TWL6040_HPLLSEL;
+			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
+					  lppllctl);
+			lppllctl &= ~TWL6040_LPLLENA;
+			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
+					  lppllctl);
+
+			twl6040->mclk_rate = freq_in;
+		}
+		break;
+	default:
+		dev_err(twl6040->dev, "unknown pll id %d\n", pll_id);
+		ret = -EINVAL;
+		goto pll_out;
+	}
+
+	twl6040->sysclk_rate = freq_out;
+	twl6040->pll = pll_id;
+
+pll_out:
+	mutex_unlock(&twl6040->mutex);
+	return ret;
+}
+EXPORT_SYMBOL(twl6040_set_pll);
+
+int twl6040_get_pll(struct twl6040 *twl6040)
+{
+	if (twl6040->power_count)
+		return twl6040->pll;
+	else
+		return -ENODEV;
+}
+EXPORT_SYMBOL(twl6040_get_pll);
+
+unsigned int twl6040_get_sysclk(struct twl6040 *twl6040)
+{
+	return twl6040->sysclk_rate;
+}
+EXPORT_SYMBOL(twl6040_get_sysclk);
+
+/* Get the combined status of the vibra control register */
+int twl6040_get_vibralr_status(struct twl6040 *twl6040)
+{
+	unsigned int reg;
+	int ret;
+	u8 status;
+
+	ret = regmap_read(twl6040->regmap, TWL6040_REG_VIBCTLL, &reg);
+	if (ret != 0)
+		return ret;
+	status = reg;
+
+	ret = regmap_read(twl6040->regmap, TWL6040_REG_VIBCTLR, &reg);
+	if (ret != 0)
+		return ret;
+	status |= reg;
+
+	status &= (TWL6040_VIBENA | TWL6040_VIBSEL);
+
+	return status;
+}
+EXPORT_SYMBOL(twl6040_get_vibralr_status);
+
+static struct resource twl6040_vibra_rsrc[] = {
+	{
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource twl6040_codec_rsrc[] = {
+	{
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static bool twl6040_readable_reg(struct device *dev, unsigned int reg)
+{
+	/* Register 0 is not readable */
+	if (!reg)
+		return false;
+	return true;
+}
+
+static bool twl6040_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case TWL6040_REG_ASICID:
+	case TWL6040_REG_ASICREV:
+	case TWL6040_REG_INTID:
+	case TWL6040_REG_LPPLLCTL:
+	case TWL6040_REG_HPPLLCTL:
+	case TWL6040_REG_STATUS:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool twl6040_writeable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case TWL6040_REG_ASICID:
+	case TWL6040_REG_ASICREV:
+	case TWL6040_REG_STATUS:
+		return false;
+	default:
+		return true;
+	}
+}
+
+static const struct regmap_config twl6040_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.reg_defaults = twl6040_defaults,
+	.num_reg_defaults = ARRAY_SIZE(twl6040_defaults),
+
+	.max_register = TWL6040_REG_STATUS, /* 0x2e */
+
+	.readable_reg = twl6040_readable_reg,
+	.volatile_reg = twl6040_volatile_reg,
+	.writeable_reg = twl6040_writeable_reg,
+
+	.cache_type = REGCACHE_RBTREE,
+	.use_single_read = true,
+	.use_single_write = true,
+};
+
+static const struct regmap_irq twl6040_irqs[] = {
+	{ .reg_offset = 0, .mask = TWL6040_THINT, },
+	{ .reg_offset = 0, .mask = TWL6040_PLUGINT | TWL6040_UNPLUGINT, },
+	{ .reg_offset = 0, .mask = TWL6040_HOOKINT, },
+	{ .reg_offset = 0, .mask = TWL6040_HFINT, },
+	{ .reg_offset = 0, .mask = TWL6040_VIBINT, },
+	{ .reg_offset = 0, .mask = TWL6040_READYINT, },
+};
+
+static struct regmap_irq_chip twl6040_irq_chip = {
+	.name = "twl6040",
+	.irqs = twl6040_irqs,
+	.num_irqs = ARRAY_SIZE(twl6040_irqs),
+
+	.num_regs = 1,
+	.status_base = TWL6040_REG_INTID,
+	.mask_base = TWL6040_REG_INTMR,
+};
+
+static int twl6040_probe(struct i2c_client *client)
+{
+	struct device_node *node = client->dev.of_node;
+	struct twl6040 *twl6040;
+	struct mfd_cell *cell = NULL;
+	int irq, ret, children = 0;
+
+	if (!node) {
+		dev_err(&client->dev, "of node is missing\n");
+		return -EINVAL;
+	}
+
+	/* In order to operate correctly we need valid interrupt config */
+	if (!client->irq) {
+		dev_err(&client->dev, "Invalid IRQ configuration\n");
+		return -EINVAL;
+	}
+
+	twl6040 = devm_kzalloc(&client->dev, sizeof(struct twl6040),
+			       GFP_KERNEL);
+	if (!twl6040)
+		return -ENOMEM;
+
+	twl6040->regmap = devm_regmap_init_i2c(client, &twl6040_regmap_config);
+	if (IS_ERR(twl6040->regmap))
+		return PTR_ERR(twl6040->regmap);
+
+	i2c_set_clientdata(client, twl6040);
+
+	twl6040->clk32k = devm_clk_get(&client->dev, "clk32k");
+	if (IS_ERR(twl6040->clk32k)) {
+		if (PTR_ERR(twl6040->clk32k) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dev_dbg(&client->dev, "clk32k is not handled\n");
+		twl6040->clk32k = NULL;
+	}
+
+	twl6040->mclk = devm_clk_get(&client->dev, "mclk");
+	if (IS_ERR(twl6040->mclk)) {
+		if (PTR_ERR(twl6040->mclk) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dev_dbg(&client->dev, "mclk is not handled\n");
+		twl6040->mclk = NULL;
+	}
+
+	twl6040->supplies[0].supply = "vio";
+	twl6040->supplies[1].supply = "v2v1";
+	ret = devm_regulator_bulk_get(&client->dev, TWL6040_NUM_SUPPLIES,
+				      twl6040->supplies);
+	if (ret != 0) {
+		dev_err(&client->dev, "Failed to get supplies: %d\n", ret);
+		return ret;
+	}
+
+	ret = regulator_bulk_enable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
+	if (ret != 0) {
+		dev_err(&client->dev, "Failed to enable supplies: %d\n", ret);
+		return ret;
+	}
+
+	twl6040->dev = &client->dev;
+	twl6040->irq = client->irq;
+
+	mutex_init(&twl6040->mutex);
+	init_completion(&twl6040->ready);
+
+	regmap_register_patch(twl6040->regmap, twl6040_patch,
+			      ARRAY_SIZE(twl6040_patch));
+
+	twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV);
+	if (twl6040->rev < 0) {
+		dev_err(&client->dev, "Failed to read revision register: %d\n",
+			twl6040->rev);
+		ret = twl6040->rev;
+		goto gpio_err;
+	}
+
+	/* ERRATA: Automatic power-up is not possible in ES1.0 */
+	if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0) {
+		twl6040->audpwron = devm_gpiod_get_optional(&client->dev,
+							    "ti,audpwron",
+							    GPIOD_OUT_LOW);
+		ret = PTR_ERR_OR_ZERO(twl6040->audpwron);
+		if (ret)
+			goto gpio_err;
+
+		gpiod_set_consumer_name(twl6040->audpwron, "audpwron");
+
+		/* Clear any pending interrupt */
+		twl6040_reg_read(twl6040, TWL6040_REG_INTID);
+	}
+
+	ret = regmap_add_irq_chip(twl6040->regmap, twl6040->irq, IRQF_ONESHOT,
+				  0, &twl6040_irq_chip, &twl6040->irq_data);
+	if (ret < 0)
+		goto gpio_err;
+
+	twl6040->irq_ready = regmap_irq_get_virq(twl6040->irq_data,
+						 TWL6040_IRQ_READY);
+	twl6040->irq_th = regmap_irq_get_virq(twl6040->irq_data,
+					      TWL6040_IRQ_TH);
+
+	ret = devm_request_threaded_irq(twl6040->dev, twl6040->irq_ready, NULL,
+					twl6040_readyint_handler, IRQF_ONESHOT,
+					"twl6040_irq_ready", twl6040);
+	if (ret) {
+		dev_err(twl6040->dev, "READY IRQ request failed: %d\n", ret);
+		goto readyirq_err;
+	}
+
+	ret = devm_request_threaded_irq(twl6040->dev, twl6040->irq_th, NULL,
+					twl6040_thint_handler, IRQF_ONESHOT,
+					"twl6040_irq_th", twl6040);
+	if (ret) {
+		dev_err(twl6040->dev, "Thermal IRQ request failed: %d\n", ret);
+		goto readyirq_err;
+	}
+
+	/*
+	 * The main functionality of twl6040 to provide audio on OMAP4+ systems.
+	 * We can add the ASoC codec child whenever this driver has been loaded.
+	 */
+	irq = regmap_irq_get_virq(twl6040->irq_data, TWL6040_IRQ_PLUG);
+	cell = &twl6040->cells[children];
+	cell->name = "twl6040-codec";
+	twl6040_codec_rsrc[0].start = irq;
+	twl6040_codec_rsrc[0].end = irq;
+	cell->resources = twl6040_codec_rsrc;
+	cell->num_resources = ARRAY_SIZE(twl6040_codec_rsrc);
+	children++;
+
+	/* Vibra input driver support */
+	if (twl6040_has_vibra(node)) {
+		irq = regmap_irq_get_virq(twl6040->irq_data, TWL6040_IRQ_VIB);
+
+		cell = &twl6040->cells[children];
+		cell->name = "twl6040-vibra";
+		twl6040_vibra_rsrc[0].start = irq;
+		twl6040_vibra_rsrc[0].end = irq;
+		cell->resources = twl6040_vibra_rsrc;
+		cell->num_resources = ARRAY_SIZE(twl6040_vibra_rsrc);
+		children++;
+	}
+
+	/* GPO support */
+	cell = &twl6040->cells[children];
+	cell->name = "twl6040-gpo";
+	children++;
+
+	/* PDM clock support  */
+	cell = &twl6040->cells[children];
+	cell->name = "twl6040-pdmclk";
+	children++;
+
+	/* The chip is powered down so mark regmap to cache only and dirty */
+	regcache_cache_only(twl6040->regmap, true);
+	regcache_mark_dirty(twl6040->regmap);
+
+	ret = mfd_add_devices(&client->dev, -1, twl6040->cells, children,
+			      NULL, 0, NULL);
+	if (ret)
+		goto readyirq_err;
+
+	return 0;
+
+readyirq_err:
+	regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
+gpio_err:
+	regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
+	return ret;
+}
+
+static void twl6040_remove(struct i2c_client *client)
+{
+	struct twl6040 *twl6040 = i2c_get_clientdata(client);
+
+	if (twl6040->power_count)
+		twl6040_power(twl6040, 0);
+
+	regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
+
+	mfd_remove_devices(&client->dev);
+
+	regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
+}
+
+static const struct i2c_device_id twl6040_i2c_id[] = {
+	{ "twl6040", 0, },
+	{ "twl6041", 0, },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, twl6040_i2c_id);
+
+static struct i2c_driver twl6040_driver = {
+	.driver = {
+		.name = "twl6040",
+	},
+	.probe_new	= twl6040_probe,
+	.remove		= twl6040_remove,
+	.id_table	= twl6040_i2c_id,
+};
+
+module_i2c_driver(twl6040_driver);
+
+MODULE_DESCRIPTION("TWL6040 MFD");
+MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>");
+MODULE_AUTHOR("Jorge Eduardo Candelaria <jorge.candelaria@ti.com>");
+MODULE_LICENSE("GPL");