Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 335 insertions, 0 deletions

diff --git a/drivers/mfd/wm8350-regmap.c b/drivers/mfd/wm8350-regmap.c
new file mode 100644
index 000000000..5663b8b0b
--- /dev/null
+++ b/drivers/mfd/wm8350-regmap.c
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * wm8350-regmap.c  --  Wolfson Microelectronics WM8350 register map
+ *
+ * This file splits out the tables describing the defaults and access
+ * status of the WM8350 registers since they are rather large.
+ *
+ * Copyright 2007, 2008 Wolfson Microelectronics PLC.
+ */
+
+#include <linux/mfd/wm8350/core.h>
+
+/*
+ * Access masks.
+ */
+
+static const struct wm8350_reg_access {
+	u16 readable;		/* Mask of readable bits */
+	u16 writable;		/* Mask of writable bits */
+	u16 vol;		/* Mask of volatile bits */
+} wm8350_reg_io_map[] = {
+	/*  read    write volatile */
+	{ 0xFFFF, 0xFFFF, 0x0000 }, /* R0   - Reset/ID */
+	{ 0x7CFF, 0x0C00, 0x0000 }, /* R1   - ID */
+	{ 0x007F, 0x0000, 0x0000 }, /* R2   - ROM Mask ID */
+	{ 0xBE3B, 0xBE3B, 0x8000 }, /* R3   - System Control 1 */
+	{ 0xFEF7, 0xFEF7, 0xF800 }, /* R4   - System Control 2 */
+	{ 0x80FF, 0x80FF, 0x8000 }, /* R5   - System Hibernate */
+	{ 0xFB0E, 0xFB0E, 0x0000 }, /* R6   - Interface Control */
+	{ 0x0000, 0x0000, 0x0000 }, /* R7 */
+	{ 0xE537, 0xE537, 0xFFFF }, /* R8   - Power mgmt (1) */
+	{ 0x0FF3, 0x0FF3, 0xFFFF }, /* R9   - Power mgmt (2) */
+	{ 0x008F, 0x008F, 0xFFFF }, /* R10  - Power mgmt (3) */
+	{ 0x6D3C, 0x6D3C, 0xFFFF }, /* R11  - Power mgmt (4) */
+	{ 0x1F8F, 0x1F8F, 0xFFFF }, /* R12  - Power mgmt (5) */
+	{ 0x8F3F, 0x8F3F, 0xFFFF }, /* R13  - Power mgmt (6) */
+	{ 0x0003, 0x0003, 0xFFFF }, /* R14  - Power mgmt (7) */
+	{ 0x0000, 0x0000, 0x0000 }, /* R15 */
+	{ 0x7F7F, 0x7F7F, 0xFFFF }, /* R16  - RTC Seconds/Minutes */
+	{ 0x073F, 0x073F, 0xFFFF }, /* R17  - RTC Hours/Day */
+	{ 0x1F3F, 0x1F3F, 0xFFFF }, /* R18  - RTC Date/Month */
+	{ 0x3FFF, 0x00FF, 0xFFFF }, /* R19  - RTC Year */
+	{ 0x7F7F, 0x7F7F, 0x0000 }, /* R20  - Alarm Seconds/Minutes */
+	{ 0x0F3F, 0x0F3F, 0x0000 }, /* R21  - Alarm Hours/Day */
+	{ 0x1F3F, 0x1F3F, 0x0000 }, /* R22  - Alarm Date/Month */
+	{ 0xEF7F, 0xEA7F, 0xFFFF }, /* R23  - RTC Time Control */
+	{ 0x3BFF, 0x0000, 0xFFFF }, /* R24  - System Interrupts */
+	{ 0xFEE7, 0x0000, 0xFFFF }, /* R25  - Interrupt Status 1 */
+	{ 0x35FF, 0x0000, 0xFFFF }, /* R26  - Interrupt Status 2 */
+	{ 0x0F3F, 0x0000, 0xFFFF }, /* R27  - Power Up Interrupt Status */
+	{ 0x0F3F, 0x0000, 0xFFFF }, /* R28  - Under Voltage Interrupt status */
+	{ 0x8000, 0x0000, 0xFFFF }, /* R29  - Over Current Interrupt status */
+	{ 0x1FFF, 0x0000, 0xFFFF }, /* R30  - GPIO Interrupt Status */
+	{ 0xEF7F, 0x0000, 0xFFFF }, /* R31  - Comparator Interrupt Status */
+	{ 0x3FFF, 0x3FFF, 0x0000 }, /* R32  - System Interrupts Mask */
+	{ 0xFEE7, 0xFEE7, 0x0000 }, /* R33  - Interrupt Status 1 Mask */
+	{ 0xF5FF, 0xF5FF, 0x0000 }, /* R34  - Interrupt Status 2 Mask */
+	{ 0x0F3F, 0x0F3F, 0x0000 }, /* R35  - Power Up Interrupt Status Mask */
+	{ 0x0F3F, 0x0F3F, 0x0000 }, /* R36  - Under Voltage Int status Mask */
+	{ 0x8000, 0x8000, 0x0000 }, /* R37  - Over Current Int status Mask */
+	{ 0x1FFF, 0x1FFF, 0x0000 }, /* R38  - GPIO Interrupt Status Mask */
+	{ 0xEF7F, 0xEF7F, 0x0000 }, /* R39  - Comparator IntStatus Mask */
+	{ 0xC9F7, 0xC9F7, 0xFFFF }, /* R40  - Clock Control 1 */
+	{ 0x8001, 0x8001, 0x0000 }, /* R41  - Clock Control 2 */
+	{ 0xFFF7, 0xFFF7, 0xFFFF }, /* R42  - FLL Control 1 */
+	{ 0xFBFF, 0xFBFF, 0x0000 }, /* R43  - FLL Control 2 */
+	{ 0xFFFF, 0xFFFF, 0x0000 }, /* R44  - FLL Control 3 */
+	{ 0x0033, 0x0033, 0x0000 }, /* R45  - FLL Control 4 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R46 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R47 */
+	{ 0x3033, 0x3033, 0x0000 }, /* R48  - DAC Control */
+	{ 0x0000, 0x0000, 0x0000 }, /* R49 */
+	{ 0x81FF, 0x81FF, 0xFFFF }, /* R50  - DAC Digital Volume L */
+	{ 0x81FF, 0x81FF, 0xFFFF }, /* R51  - DAC Digital Volume R */
+	{ 0x0000, 0x0000, 0x0000 }, /* R52 */
+	{ 0x0FFF, 0x0FFF, 0xFFFF }, /* R53  - DAC LR Rate */
+	{ 0x0017, 0x0017, 0x0000 }, /* R54  - DAC Clock Control */
+	{ 0x0000, 0x0000, 0x0000 }, /* R55 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R56 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R57 */
+	{ 0x4000, 0x4000, 0x0000 }, /* R58  - DAC Mute */
+	{ 0x7000, 0x7000, 0x0000 }, /* R59  - DAC Mute Volume */
+	{ 0x3C00, 0x3C00, 0x0000 }, /* R60  - DAC Side */
+	{ 0x0000, 0x0000, 0x0000 }, /* R61 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R62 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R63 */
+	{ 0x8303, 0x8303, 0xFFFF }, /* R64  - ADC Control */
+	{ 0x0000, 0x0000, 0x0000 }, /* R65 */
+	{ 0x81FF, 0x81FF, 0xFFFF }, /* R66  - ADC Digital Volume L */
+	{ 0x81FF, 0x81FF, 0xFFFF }, /* R67  - ADC Digital Volume R */
+	{ 0x0FFF, 0x0FFF, 0x0000 }, /* R68  - ADC Divider */
+	{ 0x0000, 0x0000, 0x0000 }, /* R69 */
+	{ 0x0FFF, 0x0FFF, 0xFFFF }, /* R70  - ADC LR Rate */
+	{ 0x0000, 0x0000, 0x0000 }, /* R71 */
+	{ 0x0707, 0x0707, 0xFFFF }, /* R72  - Input Control */
+	{ 0xC0C0, 0xC0C0, 0xFFFF }, /* R73  - IN3 Input Control */
+	{ 0xC09F, 0xC09F, 0xFFFF }, /* R74  - Mic Bias Control */
+	{ 0x0000, 0x0000, 0x0000 }, /* R75 */
+	{ 0x0F15, 0x0F15, 0xFFFF }, /* R76  - Output Control */
+	{ 0xC000, 0xC000, 0xFFFF }, /* R77  - Jack Detect */
+	{ 0x03FF, 0x03FF, 0x0000 }, /* R78  - Anti Pop Control */
+	{ 0x0000, 0x0000, 0x0000 }, /* R79 */
+	{ 0xE1FC, 0xE1FC, 0x8000 }, /* R80  - Left Input Volume */
+	{ 0xE1FC, 0xE1FC, 0x8000 }, /* R81  - Right Input Volume */
+	{ 0x0000, 0x0000, 0x0000 }, /* R82 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R83 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R84 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R85 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R86 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R87 */
+	{ 0x9807, 0x9807, 0xFFFF }, /* R88  - Left Mixer Control */
+	{ 0x980B, 0x980B, 0xFFFF }, /* R89  - Right Mixer Control */
+	{ 0x0000, 0x0000, 0x0000 }, /* R90 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R91 */
+	{ 0x8909, 0x8909, 0xFFFF }, /* R92  - OUT3 Mixer Control */
+	{ 0x9E07, 0x9E07, 0xFFFF }, /* R93  - OUT4 Mixer Control */
+	{ 0x0000, 0x0000, 0x0000 }, /* R94 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R95 */
+	{ 0x0EEE, 0x0EEE, 0x0000 }, /* R96  - Output Left Mixer Volume */
+	{ 0xE0EE, 0xE0EE, 0x0000 }, /* R97  - Output Right Mixer Volume */
+	{ 0x0E0F, 0x0E0F, 0x0000 }, /* R98  - Input Mixer Volume L */
+	{ 0xE0E1, 0xE0E1, 0x0000 }, /* R99  - Input Mixer Volume R */
+	{ 0x800E, 0x800E, 0x0000 }, /* R100 - Input Mixer Volume */
+	{ 0x0000, 0x0000, 0x0000 }, /* R101 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R102 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R103 */
+	{ 0xE1FC, 0xE1FC, 0xFFFF }, /* R104 - LOUT1 Volume */
+	{ 0xE1FC, 0xE1FC, 0xFFFF }, /* R105 - ROUT1 Volume */
+	{ 0xE1FC, 0xE1FC, 0xFFFF }, /* R106 - LOUT2 Volume */
+	{ 0xE7FC, 0xE7FC, 0xFFFF }, /* R107 - ROUT2 Volume */
+	{ 0x0000, 0x0000, 0x0000 }, /* R108 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R109 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R110 */
+	{ 0x80E0, 0x80E0, 0xFFFF }, /* R111 - BEEP Volume */
+	{ 0xBF00, 0xBF00, 0x0000 }, /* R112 - AI Formating */
+	{ 0x00F1, 0x00F1, 0x0000 }, /* R113 - ADC DAC COMP */
+	{ 0x00F8, 0x00F8, 0x0000 }, /* R114 - AI ADC Control */
+	{ 0x40FB, 0x40FB, 0x0000 }, /* R115 - AI DAC Control */
+	{ 0x7C30, 0x7C30, 0x0000 }, /* R116 - AIF Test */
+	{ 0x0000, 0x0000, 0x0000 }, /* R117 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R118 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R119 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R120 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R121 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R122 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R123 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R124 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R125 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R126 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R127 */
+	{ 0x1FFF, 0x1FFF, 0x0000 }, /* R128 - GPIO Debounce */
+	{ 0x1FFF, 0x1FFF, 0x0000 }, /* R129 - GPIO Pin pull up Control */
+	{ 0x1FFF, 0x1FFF, 0x0000 }, /* R130 - GPIO Pull down Control */
+	{ 0x1FFF, 0x1FFF, 0x0000 }, /* R131 - GPIO Interrupt Mode */
+	{ 0x0000, 0x0000, 0x0000 }, /* R132 */
+	{ 0x00C0, 0x00C0, 0x0000 }, /* R133 - GPIO Control */
+	{ 0x1FFF, 0x1FFF, 0x0000 }, /* R134 - GPIO Configuration (i/o) */
+	{ 0x1FFF, 0x1FFF, 0x0000 }, /* R135 - GPIO Pin Polarity / Type */
+	{ 0x0000, 0x0000, 0x0000 }, /* R136 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R137 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R138 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R139 */
+	{ 0xFFFF, 0xFFFF, 0x0000 }, /* R140 - GPIO Function Select 1 */
+	{ 0xFFFF, 0xFFFF, 0x0000 }, /* R141 - GPIO Function Select 2 */
+	{ 0xFFFF, 0xFFFF, 0x0000 }, /* R142 - GPIO Function Select 3 */
+	{ 0x000F, 0x000F, 0x0000 }, /* R143 - GPIO Function Select 4 */
+	{ 0xF0FF, 0xF0FF, 0xA000 }, /* R144 - Digitiser Control (1) */
+	{ 0x3707, 0x3707, 0x0000 }, /* R145 - Digitiser Control (2) */
+	{ 0x0000, 0x0000, 0x0000 }, /* R146 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R147 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R148 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R149 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R150 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R151 */
+	{ 0x7FFF, 0x7000, 0xFFFF }, /* R152 - AUX1 Readback */
+	{ 0x7FFF, 0x7000, 0xFFFF }, /* R153 - AUX2 Readback */
+	{ 0x7FFF, 0x7000, 0xFFFF }, /* R154 - AUX3 Readback */
+	{ 0x7FFF, 0x7000, 0xFFFF }, /* R155 - AUX4 Readback */
+	{ 0x0FFF, 0x0000, 0xFFFF }, /* R156 - USB Voltage Readback */
+	{ 0x0FFF, 0x0000, 0xFFFF }, /* R157 - LINE Voltage Readback */
+	{ 0x0FFF, 0x0000, 0xFFFF }, /* R158 - BATT Voltage Readback */
+	{ 0x0FFF, 0x0000, 0xFFFF }, /* R159 - Chip Temp Readback */
+	{ 0x0000, 0x0000, 0x0000 }, /* R160 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R161 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R162 */
+	{ 0x000F, 0x000F, 0x0000 }, /* R163 - Generic Comparator Control */
+	{ 0xFFFF, 0xFFFF, 0x0000 }, /* R164 - Generic comparator 1 */
+	{ 0xFFFF, 0xFFFF, 0x0000 }, /* R165 - Generic comparator 2 */
+	{ 0xFFFF, 0xFFFF, 0x0000 }, /* R166 - Generic comparator 3 */
+	{ 0xFFFF, 0xFFFF, 0x0000 }, /* R167 - Generic comparator 4 */
+	{ 0xBFFF, 0xBFFF, 0x8000 }, /* R168 - Battery Charger Control 1 */
+	{ 0xFFFF, 0x4FFF, 0xB000 }, /* R169 - Battery Charger Control 2 */
+	{ 0x007F, 0x007F, 0x0000 }, /* R170 - Battery Charger Control 3 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R171 */
+	{ 0x903F, 0x903F, 0xFFFF }, /* R172 - Current Sink Driver A */
+	{ 0xE333, 0xE333, 0xFFFF }, /* R173 - CSA Flash control */
+	{ 0x903F, 0x903F, 0xFFFF }, /* R174 - Current Sink Driver B */
+	{ 0xE333, 0xE333, 0xFFFF }, /* R175 - CSB Flash control */
+	{ 0x8F3F, 0x8F3F, 0xFFFF }, /* R176 - DCDC/LDO requested */
+	{ 0x332D, 0x332D, 0x0000 }, /* R177 - DCDC Active options */
+	{ 0x002D, 0x002D, 0x0000 }, /* R178 - DCDC Sleep options */
+	{ 0x5177, 0x5177, 0x8000 }, /* R179 - Power-check comparator */
+	{ 0x047F, 0x047F, 0x0000 }, /* R180 - DCDC1 Control */
+	{ 0xFFC0, 0xFFC0, 0x0000 }, /* R181 - DCDC1 Timeouts */
+	{ 0x737F, 0x737F, 0x0000 }, /* R182 - DCDC1 Low Power */
+	{ 0x535B, 0x535B, 0x0000 }, /* R183 - DCDC2 Control */
+	{ 0xFFC0, 0xFFC0, 0x0000 }, /* R184 - DCDC2 Timeouts */
+	{ 0x0000, 0x0000, 0x0000 }, /* R185 */
+	{ 0x047F, 0x047F, 0x0000 }, /* R186 - DCDC3 Control */
+	{ 0xFFC0, 0xFFC0, 0x0000 }, /* R187 - DCDC3 Timeouts */
+	{ 0x737F, 0x737F, 0x0000 }, /* R188 - DCDC3 Low Power */
+	{ 0x047F, 0x047F, 0x0000 }, /* R189 - DCDC4 Control */
+	{ 0xFFC0, 0xFFC0, 0x0000 }, /* R190 - DCDC4 Timeouts */
+	{ 0x737F, 0x737F, 0x0000 }, /* R191 - DCDC4 Low Power */
+	{ 0x535B, 0x535B, 0x0000 }, /* R192 - DCDC5 Control */
+	{ 0xFFC0, 0xFFC0, 0x0000 }, /* R193 - DCDC5 Timeouts */
+	{ 0x0000, 0x0000, 0x0000 }, /* R194 */
+	{ 0x047F, 0x047F, 0x0000 }, /* R195 - DCDC6 Control */
+	{ 0xFFC0, 0xFFC0, 0x0000 }, /* R196 - DCDC6 Timeouts */
+	{ 0x737F, 0x737F, 0x0000 }, /* R197 - DCDC6 Low Power */
+	{ 0x0000, 0x0000, 0x0000 }, /* R198 */
+	{ 0xFFD3, 0xFFD3, 0x0000 }, /* R199 - Limit Switch Control */
+	{ 0x441F, 0x441F, 0x0000 }, /* R200 - LDO1 Control */
+	{ 0xFFC0, 0xFFC0, 0x0000 }, /* R201 - LDO1 Timeouts */
+	{ 0x331F, 0x331F, 0x0000 }, /* R202 - LDO1 Low Power */
+	{ 0x441F, 0x441F, 0x0000 }, /* R203 - LDO2 Control */
+	{ 0xFFC0, 0xFFC0, 0x0000 }, /* R204 - LDO2 Timeouts */
+	{ 0x331F, 0x331F, 0x0000 }, /* R205 - LDO2 Low Power */
+	{ 0x441F, 0x441F, 0x0000 }, /* R206 - LDO3 Control */
+	{ 0xFFC0, 0xFFC0, 0x0000 }, /* R207 - LDO3 Timeouts */
+	{ 0x331F, 0x331F, 0x0000 }, /* R208 - LDO3 Low Power */
+	{ 0x441F, 0x441F, 0x0000 }, /* R209 - LDO4 Control */
+	{ 0xFFC0, 0xFFC0, 0x0000 }, /* R210 - LDO4 Timeouts */
+	{ 0x331F, 0x331F, 0x0000 }, /* R211 - LDO4 Low Power */
+	{ 0x0000, 0x0000, 0x0000 }, /* R212 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R213 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R214 */
+	{ 0x8F3F, 0x8F3F, 0x0000 }, /* R215 - VCC_FAULT Masks */
+	{ 0xFF3F, 0xE03F, 0x0000 }, /* R216 - Main Bandgap Control */
+	{ 0xEF2F, 0xE02F, 0x0000 }, /* R217 - OSC Control */
+	{ 0xF3FF, 0xB3FF, 0xc000 }, /* R218 - RTC Tick Control */
+	{ 0xFFFF, 0xFFFF, 0x0000 }, /* R219 - Security */
+	{ 0x09FF, 0x01FF, 0x0000 }, /* R220 - RAM BIST 1 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R221 */
+	{ 0xFFFF, 0xFFFF, 0xFFFF }, /* R222 */
+	{ 0xFFFF, 0xFFFF, 0xFFFF }, /* R223 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R224 */
+	{ 0x8F3F, 0x0000, 0xFFFF }, /* R225 - DCDC/LDO status */
+	{ 0x0000, 0x0000, 0xFFFF }, /* R226 - Charger status */
+	{ 0x34FE, 0x0000, 0xFFFF }, /* R227 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R228 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R229 */
+	{ 0xFFFF, 0x1FFF, 0xFFFF }, /* R230 - GPIO Pin Status */
+	{ 0xFFFF, 0x1FFF, 0xFFFF }, /* R231 */
+	{ 0xFFFF, 0x1FFF, 0xFFFF }, /* R232 */
+	{ 0xFFFF, 0x1FFF, 0xFFFF }, /* R233 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R234 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R235 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R236 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R237 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R238 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R239 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R240 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R241 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R242 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R243 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R244 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R245 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R246 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R247 */
+	{ 0xFFFF, 0x0010, 0xFFFF }, /* R248 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R249 */
+	{ 0xFFFF, 0x0010, 0xFFFF }, /* R250 */
+	{ 0xFFFF, 0x0010, 0xFFFF }, /* R251 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R252 */
+	{ 0xFFFF, 0x0010, 0xFFFF }, /* R253 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R254 */
+	{ 0x0000, 0x0000, 0x0000 }, /* R255 */
+};
+
+static bool wm8350_readable(struct device *dev, unsigned int reg)
+{
+	return wm8350_reg_io_map[reg].readable;
+}
+
+static bool wm8350_writeable(struct device *dev, unsigned int reg)
+{
+	struct wm8350 *wm8350 = dev_get_drvdata(dev);
+
+	if (!wm8350->unlocked) {
+		if ((reg >= WM8350_GPIO_FUNCTION_SELECT_1 &&
+		     reg <= WM8350_GPIO_FUNCTION_SELECT_4) ||
+		    (reg >= WM8350_BATTERY_CHARGER_CONTROL_1 &&
+		     reg <= WM8350_BATTERY_CHARGER_CONTROL_3))
+			return false;
+	}
+
+	return wm8350_reg_io_map[reg].writable;
+}
+
+static bool wm8350_volatile(struct device *dev, unsigned int reg)
+{
+	return wm8350_reg_io_map[reg].vol;
+}
+
+static bool wm8350_precious(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case WM8350_SYSTEM_INTERRUPTS:
+	case WM8350_INT_STATUS_1:
+	case WM8350_INT_STATUS_2:
+	case WM8350_POWER_UP_INT_STATUS:
+	case WM8350_UNDER_VOLTAGE_INT_STATUS:
+	case WM8350_OVER_CURRENT_INT_STATUS:
+	case WM8350_GPIO_INT_STATUS:
+	case WM8350_COMPARATOR_INT_STATUS:
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+const struct regmap_config wm8350_regmap = {
+	.reg_bits = 8,
+	.val_bits = 16,
+
+	.cache_type = REGCACHE_RBTREE,
+
+	.max_register = WM8350_MAX_REGISTER,
+	.readable_reg = wm8350_readable,
+	.writeable_reg = wm8350_writeable,
+	.volatile_reg = wm8350_volatile,
+	.precious_reg = wm8350_precious,
+};