Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 200 insertions, 0 deletions

diff --git a/drivers/misc/cxl/hcalls.h b/drivers/misc/cxl/hcalls.h
new file mode 100644
index 000000000..d200465dc
--- /dev/null
+++ b/drivers/misc/cxl/hcalls.h
@@ -0,0 +1,200 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2015 IBM Corp.
+ */
+
+#ifndef _HCALLS_H
+#define _HCALLS_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include <asm/hvcall.h>
+#include "cxl.h"
+
+#define SG_BUFFER_SIZE 4096
+#define SG_MAX_ENTRIES 256
+
+struct sg_list {
+	u64 phys_addr;
+	u64 len;
+};
+
+/*
+ * This is straight out of PAPR, but replacing some of the compound fields with
+ * a single field, where they were identical to the register layout.
+ *
+ * The 'flags' parameter regroups the various bit-fields
+ */
+#define CXL_PE_CSRP_VALID			(1ULL << 63)
+#define CXL_PE_PROBLEM_STATE			(1ULL << 62)
+#define CXL_PE_SECONDARY_SEGMENT_TBL_SRCH	(1ULL << 61)
+#define CXL_PE_TAGS_ACTIVE			(1ULL << 60)
+#define CXL_PE_USER_STATE			(1ULL << 59)
+#define CXL_PE_TRANSLATION_ENABLED		(1ULL << 58)
+#define CXL_PE_64_BIT				(1ULL << 57)
+#define CXL_PE_PRIVILEGED_PROCESS		(1ULL << 56)
+
+#define CXL_PROCESS_ELEMENT_VERSION 1
+struct cxl_process_element_hcall {
+	__be64 version;
+	__be64 flags;
+	u8     reserved0[12];
+	__be32 pslVirtualIsn;
+	u8     applicationVirtualIsnBitmap[256];
+	u8     reserved1[144];
+	struct cxl_process_element_common common;
+	u8     reserved4[12];
+} __packed;
+
+#define H_STATE_NORMAL              1
+#define H_STATE_DISABLE             2
+#define H_STATE_TEMP_UNAVAILABLE    3
+#define H_STATE_PERM_UNAVAILABLE    4
+
+/* NOTE: element must be a logical real address, and must be pinned */
+long cxl_h_attach_process(u64 unit_address, struct cxl_process_element_hcall *element,
+			u64 *process_token, u64 *mmio_addr, u64 *mmio_size);
+
+/**
+ * cxl_h_detach_process - Detach a process element from a coherent
+ *                        platform function.
+ */
+long cxl_h_detach_process(u64 unit_address, u64 process_token);
+
+/**
+ * cxl_h_reset_afu - Perform a reset to the coherent platform function.
+ */
+long cxl_h_reset_afu(u64 unit_address);
+
+/**
+ * cxl_h_suspend_process - Suspend a process from being executed
+ * Parameter1 = process-token as returned from H_ATTACH_CA_PROCESS when
+ *              process was attached.
+ */
+long cxl_h_suspend_process(u64 unit_address, u64 process_token);
+
+/**
+ * cxl_h_resume_process - Resume a process to be executed
+ * Parameter1 = process-token as returned from H_ATTACH_CA_PROCESS when
+ *              process was attached.
+ */
+long cxl_h_resume_process(u64 unit_address, u64 process_token);
+
+/**
+ * cxl_h_read_error_state - Reads the error state of the coherent
+ *                          platform function.
+ * R4 contains the error state
+ */
+long cxl_h_read_error_state(u64 unit_address, u64 *state);
+
+/**
+ * cxl_h_get_afu_err - collect the AFU error buffer
+ * Parameter1 = byte offset into error buffer to retrieve, valid values
+ *              are between 0 and (ibm,error-buffer-size - 1)
+ * Parameter2 = 4K aligned real address of error buffer, to be filled in
+ * Parameter3 = length of error buffer, valid values are 4K or less
+ */
+long cxl_h_get_afu_err(u64 unit_address, u64 offset, u64 buf_address, u64 len);
+
+/**
+ * cxl_h_get_config - collect configuration record for the
+ *                    coherent platform function
+ * Parameter1 = # of configuration record to retrieve, valid values are
+ *              between 0 and (ibm,#config-records - 1)
+ * Parameter2 = byte offset into configuration record to retrieve,
+ *              valid values are between 0 and (ibm,config-record-size - 1)
+ * Parameter3 = 4K aligned real address of configuration record buffer,
+ *              to be filled in
+ * Parameter4 = length of configuration buffer, valid values are 4K or less
+ */
+long cxl_h_get_config(u64 unit_address, u64 cr_num, u64 offset,
+		u64 buf_address, u64 len);
+
+/**
+ * cxl_h_terminate_process - Terminate the process before completion
+ * Parameter1 = process-token as returned from H_ATTACH_CA_PROCESS when
+ *              process was attached.
+ */
+long cxl_h_terminate_process(u64 unit_address, u64 process_token);
+
+/**
+ * cxl_h_collect_vpd - Collect VPD for the coherent platform function.
+ * Parameter1 = # of VPD record to retrieve, valid values are between 0
+ *              and (ibm,#config-records - 1).
+ * Parameter2 = 4K naturally aligned real buffer containing block
+ *              list entries
+ * Parameter3 = number of block list entries in the block list, valid
+ *              values are between 0 and 256
+ */
+long cxl_h_collect_vpd(u64 unit_address, u64 record, u64 list_address,
+		       u64 num, u64 *out);
+
+/**
+ * cxl_h_get_fn_error_interrupt - Read the function-wide error data based on an interrupt
+ */
+long cxl_h_get_fn_error_interrupt(u64 unit_address, u64 *reg);
+
+/**
+ * cxl_h_ack_fn_error_interrupt - Acknowledge function-wide error data
+ *                                based on an interrupt
+ * Parameter1 = value to write to the function-wide error interrupt register
+ */
+long cxl_h_ack_fn_error_interrupt(u64 unit_address, u64 value);
+
+/**
+ * cxl_h_get_error_log - Retrieve the Platform Log ID (PLID) of
+ *                       an error log
+ */
+long cxl_h_get_error_log(u64 unit_address, u64 value);
+
+/**
+ * cxl_h_collect_int_info - Collect interrupt info about a coherent
+ *                          platform function after an interrupt occurred.
+ */
+long cxl_h_collect_int_info(u64 unit_address, u64 process_token,
+			struct cxl_irq_info *info);
+
+/**
+ * cxl_h_control_faults - Control the operation of a coherent platform
+ *                        function after a fault occurs.
+ *
+ * Parameters
+ *    control-mask: value to control the faults
+ *                  looks like PSL_TFC_An shifted >> 32
+ *    reset-mask: mask to control reset of function faults
+ *                Set reset_mask = 1 to reset PSL errors
+ */
+long cxl_h_control_faults(u64 unit_address, u64 process_token,
+			u64 control_mask, u64 reset_mask);
+
+/**
+ * cxl_h_reset_adapter - Perform a reset to the coherent platform facility.
+ */
+long cxl_h_reset_adapter(u64 unit_address);
+
+/**
+ * cxl_h_collect_vpd - Collect VPD for the coherent platform function.
+ * Parameter1 = 4K naturally aligned real buffer containing block
+ *              list entries
+ * Parameter2 = number of block list entries in the block list, valid
+ *              values are between 0 and 256
+ */
+long cxl_h_collect_vpd_adapter(u64 unit_address, u64 list_address,
+			       u64 num, u64 *out);
+
+/**
+ * cxl_h_download_adapter_image - Download the base image to the coherent
+ *                                platform facility.
+ */
+long cxl_h_download_adapter_image(u64 unit_address,
+				  u64 list_address, u64 num,
+				  u64 *out);
+
+/**
+ * cxl_h_validate_adapter_image - Validate the base image in the coherent
+ *                                platform facility.
+ */
+long cxl_h_validate_adapter_image(u64 unit_address,
+				  u64 list_address, u64 num,
+				  u64 *out);
+#endif /* _HCALLS_H */