Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 702 insertions, 0 deletions

diff --git a/drivers/misc/habanalabs/include/common/hl_boot_if.h b/drivers/misc/habanalabs/include/common/hl_boot_if.h
new file mode 100644
index 000000000..e0ea51cc7
--- /dev/null
+++ b/drivers/misc/habanalabs/include/common/hl_boot_if.h
@@ -0,0 +1,702 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright 2018-2020 HabanaLabs, Ltd.
+ * All Rights Reserved.
+ *
+ */
+
+#ifndef HL_BOOT_IF_H
+#define HL_BOOT_IF_H
+
+#define LKD_HARD_RESET_MAGIC		0xED7BD694 /* deprecated - do not use */
+#define HL_POWER9_HOST_MAGIC		0x1DA30009
+
+#define BOOT_FIT_SRAM_OFFSET		0x200000
+
+#define VERSION_MAX_LEN			128
+
+enum cpu_boot_err {
+	CPU_BOOT_ERR_DRAM_INIT_FAIL = 0,
+	CPU_BOOT_ERR_FIT_CORRUPTED = 1,
+	CPU_BOOT_ERR_TS_INIT_FAIL = 2,
+	CPU_BOOT_ERR_DRAM_SKIPPED = 3,
+	CPU_BOOT_ERR_BMC_WAIT_SKIPPED = 4,
+	CPU_BOOT_ERR_NIC_DATA_NOT_RDY = 5,
+	CPU_BOOT_ERR_NIC_FW_FAIL = 6,
+	CPU_BOOT_ERR_SECURITY_NOT_RDY = 7,
+	CPU_BOOT_ERR_SECURITY_FAIL = 8,
+	CPU_BOOT_ERR_EFUSE_FAIL = 9,
+	CPU_BOOT_ERR_PRI_IMG_VER_FAIL = 10,
+	CPU_BOOT_ERR_SEC_IMG_VER_FAIL = 11,
+	CPU_BOOT_ERR_PLL_FAIL = 12,
+	CPU_BOOT_ERR_DEVICE_UNUSABLE_FAIL = 13,
+	CPU_BOOT_ERR_BOOT_FW_CRIT_ERR = 18,
+	CPU_BOOT_ERR_BINNING_FAIL = 19,
+	CPU_BOOT_ERR_TPM_FAIL = 20,
+	CPU_BOOT_ERR_TMP_THRESH_INIT_FAIL = 21,
+	CPU_BOOT_ERR_EEPROM_FAIL = 22,
+	CPU_BOOT_ERR_ENABLED = 31,
+	CPU_BOOT_ERR_SCND_EN = 63,
+	CPU_BOOT_ERR_LAST = 64 /* we have 2 registers of 32 bits */
+};
+
+/*
+ * CPU error bits in BOOT_ERROR registers
+ *
+ * CPU_BOOT_ERR0_DRAM_INIT_FAIL		DRAM initialization failed.
+ *					DRAM is not reliable to use.
+ *
+ * CPU_BOOT_ERR0_FIT_CORRUPTED		FIT data integrity verification of the
+ *					image provided by the host has failed.
+ *
+ * CPU_BOOT_ERR0_TS_INIT_FAIL		Thermal Sensor initialization failed.
+ *					Boot continues as usual, but keep in
+ *					mind this is a warning.
+ *
+ * CPU_BOOT_ERR0_DRAM_SKIPPED		DRAM initialization has been skipped.
+ *					Skipping DRAM initialization has been
+ *					requested (e.g. strap, command, etc.)
+ *					and FW skipped the DRAM initialization.
+ *					Host can initialize the DRAM.
+ *
+ * CPU_BOOT_ERR0_BMC_WAIT_SKIPPED	Waiting for BMC data will be skipped.
+ *					Meaning the BMC data might not be
+ *					available until reset.
+ *
+ * CPU_BOOT_ERR0_NIC_DATA_NOT_RDY	NIC data from BMC is not ready.
+ *					BMC has not provided the NIC data yet.
+ *					Once provided this bit will be cleared.
+ *
+ * CPU_BOOT_ERR0_NIC_FW_FAIL		NIC FW loading failed.
+ *					The NIC FW loading and initialization
+ *					failed. This means NICs are not usable.
+ *
+ * CPU_BOOT_ERR0_SECURITY_NOT_RDY	Chip security initialization has been
+ *					started, but is not ready yet - chip
+ *					cannot be accessed.
+ *
+ * CPU_BOOT_ERR0_SECURITY_FAIL		Security related tasks have failed.
+ *					The tasks are security init (root of
+ *					trust), boot authentication (chain of
+ *					trust), data packets authentication.
+ *
+ * CPU_BOOT_ERR0_EFUSE_FAIL		Reading from eFuse failed.
+ *					The PCI device ID might be wrong.
+ *
+ * CPU_BOOT_ERR0_PRI_IMG_VER_FAIL	Verification of primary image failed.
+ *					It mean that ppboot checksum
+ *					verification for the preboot primary
+ *					image has failed to match expected
+ *					checksum. Trying to program image again
+ *					might solve this.
+ *
+ * CPU_BOOT_ERR0_SEC_IMG_VER_FAIL	Verification of secondary image failed.
+ *					It mean that ppboot checksum
+ *					verification for the preboot secondary
+ *					image has failed to match expected
+ *					checksum. Trying to program image again
+ *					might solve this.
+ *
+ * CPU_BOOT_ERR0_PLL_FAIL		PLL settings failed, meaning that one
+ *					of the PLLs remains in REF_CLK
+ *
+ * CPU_BOOT_ERR0_DEVICE_UNUSABLE_FAIL	Device is unusable and customer support
+ *					should be contacted.
+ *
+ * CPU_BOOT_ERR0_BOOT_FW_CRIT_ERR	Critical error was detected during
+ *					the execution of ppboot or preboot.
+ *					for example: stack overflow.
+ *
+ * CPU_BOOT_ERR0_BINNING_FAIL		Binning settings failed, meaning
+ *					malfunctioning components might still be
+ *					in use.
+ *
+ * CPU_BOOT_ERR0_TPM_FAIL		TPM verification flow failed.
+ *
+ * CPU_BOOT_ERR0_TMP_THRESH_INIT_FAIL	Failed to set threshold for tmperature
+ *					sensor.
+ *
+ * CPU_BOOT_ERR_EEPROM_FAIL		Failed reading EEPROM data. Defaults
+ *					are used.
+ *
+ * CPU_BOOT_ERR0_ENABLED		Error registers enabled.
+ *					This is a main indication that the
+ *					running FW populates the error
+ *					registers. Meaning the error bits are
+ *					not garbage, but actual error statuses.
+ */
+#define CPU_BOOT_ERR0_DRAM_INIT_FAIL		(1 << CPU_BOOT_ERR_DRAM_INIT_FAIL)
+#define CPU_BOOT_ERR0_FIT_CORRUPTED		(1 << CPU_BOOT_ERR_FIT_CORRUPTED)
+#define CPU_BOOT_ERR0_TS_INIT_FAIL		(1 << CPU_BOOT_ERR_TS_INIT_FAIL)
+#define CPU_BOOT_ERR0_DRAM_SKIPPED		(1 << CPU_BOOT_ERR_DRAM_SKIPPED)
+#define CPU_BOOT_ERR0_BMC_WAIT_SKIPPED		(1 << CPU_BOOT_ERR_BMC_WAIT_SKIPPED)
+#define CPU_BOOT_ERR0_NIC_DATA_NOT_RDY		(1 << CPU_BOOT_ERR_NIC_DATA_NOT_RDY)
+#define CPU_BOOT_ERR0_NIC_FW_FAIL		(1 << CPU_BOOT_ERR_NIC_FW_FAIL)
+#define CPU_BOOT_ERR0_SECURITY_NOT_RDY		(1 << CPU_BOOT_ERR_SECURITY_NOT_RDY)
+#define CPU_BOOT_ERR0_SECURITY_FAIL		(1 << CPU_BOOT_ERR_SECURITY_FAIL)
+#define CPU_BOOT_ERR0_EFUSE_FAIL		(1 << CPU_BOOT_ERR_EFUSE_FAIL)
+#define CPU_BOOT_ERR0_PRI_IMG_VER_FAIL		(1 << CPU_BOOT_ERR_PRI_IMG_VER_FAIL)
+#define CPU_BOOT_ERR0_SEC_IMG_VER_FAIL		(1 << CPU_BOOT_ERR_SEC_IMG_VER_FAIL)
+#define CPU_BOOT_ERR0_PLL_FAIL			(1 << CPU_BOOT_ERR_PLL_FAIL)
+#define CPU_BOOT_ERR0_DEVICE_UNUSABLE_FAIL	(1 << CPU_BOOT_ERR_DEVICE_UNUSABLE_FAIL)
+#define CPU_BOOT_ERR0_BOOT_FW_CRIT_ERR		(1 << CPU_BOOT_ERR_BOOT_FW_CRIT_ERR)
+#define CPU_BOOT_ERR0_BINNING_FAIL		(1 << CPU_BOOT_ERR_BINNING_FAIL)
+#define CPU_BOOT_ERR0_TPM_FAIL			(1 << CPU_BOOT_ERR_TPM_FAIL)
+#define CPU_BOOT_ERR0_TMP_THRESH_INIT_FAIL	(1 << CPU_BOOT_ERR_TMP_THRESH_INIT_FAIL)
+#define CPU_BOOT_ERR0_EEPROM_FAIL		(1 << CPU_BOOT_ERR_EEPROM_FAIL)
+#define CPU_BOOT_ERR0_ENABLED			(1 << CPU_BOOT_ERR_ENABLED)
+#define CPU_BOOT_ERR1_ENABLED			(1 << CPU_BOOT_ERR_ENABLED)
+
+enum cpu_boot_dev_sts {
+	CPU_BOOT_DEV_STS_SECURITY_EN = 0,
+	CPU_BOOT_DEV_STS_DEBUG_EN = 1,
+	CPU_BOOT_DEV_STS_WATCHDOG_EN = 2,
+	CPU_BOOT_DEV_STS_DRAM_INIT_EN = 3,
+	CPU_BOOT_DEV_STS_BMC_WAIT_EN = 4,
+	CPU_BOOT_DEV_STS_E2E_CRED_EN = 5,
+	CPU_BOOT_DEV_STS_HBM_CRED_EN = 6,
+	CPU_BOOT_DEV_STS_RL_EN = 7,
+	CPU_BOOT_DEV_STS_SRAM_SCR_EN = 8,
+	CPU_BOOT_DEV_STS_DRAM_SCR_EN = 9,
+	CPU_BOOT_DEV_STS_FW_HARD_RST_EN = 10,
+	CPU_BOOT_DEV_STS_PLL_INFO_EN = 11,
+	CPU_BOOT_DEV_STS_SP_SRAM_EN = 12,
+	CPU_BOOT_DEV_STS_CLK_GATE_EN = 13,
+	CPU_BOOT_DEV_STS_HBM_ECC_EN = 14,
+	CPU_BOOT_DEV_STS_PKT_PI_ACK_EN = 15,
+	CPU_BOOT_DEV_STS_FW_LD_COM_EN = 16,
+	CPU_BOOT_DEV_STS_FW_IATU_CONF_EN = 17,
+	CPU_BOOT_DEV_STS_FW_NIC_MAC_EN = 18,
+	CPU_BOOT_DEV_STS_DYN_PLL_EN = 19,
+	CPU_BOOT_DEV_STS_GIC_PRIVILEGED_EN = 20,
+	CPU_BOOT_DEV_STS_EQ_INDEX_EN = 21,
+	CPU_BOOT_DEV_STS_MULTI_IRQ_POLL_EN = 22,
+	CPU_BOOT_DEV_STS_FW_NIC_STAT_XPCS91_EN = 23,
+	CPU_BOOT_DEV_STS_FW_NIC_STAT_EXT_EN = 24,
+	CPU_BOOT_DEV_STS_IS_IDLE_CHECK_EN = 25,
+	CPU_BOOT_DEV_STS_MAP_HWMON_EN = 26,
+	CPU_BOOT_DEV_STS_ENABLED = 31,
+	CPU_BOOT_DEV_STS_SCND_EN = 63,
+	CPU_BOOT_DEV_STS_LAST = 64 /* we have 2 registers of 32 bits */
+};
+
+/*
+ * BOOT DEVICE STATUS bits in BOOT_DEVICE_STS registers
+ *
+ * CPU_BOOT_DEV_STS0_SECURITY_EN	Security is Enabled.
+ *					This is an indication for security
+ *					enabled in FW, which means that
+ *					all conditions for security are met:
+ *					device is indicated as security enabled,
+ *					registers are protected, and device
+ *					uses keys for image verification.
+ *					Initialized in: preboot
+ *
+ * CPU_BOOT_DEV_STS0_DEBUG_EN		Debug is enabled.
+ *					Enabled when JTAG or DEBUG is enabled
+ *					in FW.
+ *					Initialized in: preboot
+ *
+ * CPU_BOOT_DEV_STS0_WATCHDOG_EN	Watchdog is enabled.
+ *					Watchdog is enabled in FW.
+ *					Initialized in: preboot
+ *
+ * CPU_BOOT_DEV_STS0_DRAM_INIT_EN	DRAM initialization is enabled.
+ *					DRAM initialization has been done in FW.
+ *					Initialized in: u-boot
+ *
+ * CPU_BOOT_DEV_STS0_BMC_WAIT_EN	Waiting for BMC data enabled.
+ *					If set, it means that during boot,
+ *					FW waited for BMC data.
+ *					Initialized in: u-boot
+ *
+ * CPU_BOOT_DEV_STS0_E2E_CRED_EN	E2E credits initialized.
+ *					FW initialized E2E credits.
+ *					Initialized in: u-boot
+ *
+ * CPU_BOOT_DEV_STS0_HBM_CRED_EN	HBM credits initialized.
+ *					FW initialized HBM credits.
+ *					Initialized in: u-boot
+ *
+ * CPU_BOOT_DEV_STS0_RL_EN		Rate limiter initialized.
+ *					FW initialized rate limiter.
+ *					Initialized in: u-boot
+ *
+ * CPU_BOOT_DEV_STS0_SRAM_SCR_EN	SRAM scrambler enabled.
+ *					FW initialized SRAM scrambler.
+ *					Initialized in: linux
+ *
+ * CPU_BOOT_DEV_STS0_DRAM_SCR_EN	DRAM scrambler enabled.
+ *					FW initialized DRAM scrambler.
+ *					Initialized in: u-boot
+ *
+ * CPU_BOOT_DEV_STS0_FW_HARD_RST_EN	FW hard reset procedure is enabled.
+ *					FW has the hard reset procedure
+ *					implemented. This means that FW will
+ *					perform hard reset procedure on
+ *					receiving the halt-machine event.
+ *					Initialized in: preboot, u-boot, linux
+ *
+ * CPU_BOOT_DEV_STS0_PLL_INFO_EN	FW retrieval of PLL info is enabled.
+ *					Initialized in: linux
+ *
+ * CPU_BOOT_DEV_STS0_SP_SRAM_EN		SP SRAM is initialized and available
+ *					for use.
+ *					Initialized in: preboot
+ *
+ * CPU_BOOT_DEV_STS0_CLK_GATE_EN	Clock Gating enabled.
+ *					FW initialized Clock Gating.
+ *					Initialized in: preboot
+ *
+ * CPU_BOOT_DEV_STS0_HBM_ECC_EN		HBM ECC handling Enabled.
+ *					FW handles HBM ECC indications.
+ *					Initialized in: linux
+ *
+ * CPU_BOOT_DEV_STS0_PKT_PI_ACK_EN	Packets ack value used in the armcpd
+ *					is set to the PI counter.
+ *					Initialized in: linux
+ *
+ * CPU_BOOT_DEV_STS0_FW_LD_COM_EN	Flexible FW loading communication
+ *					protocol is enabled.
+ *					Initialized in: preboot
+ *
+ * CPU_BOOT_DEV_STS0_FW_IATU_CONF_EN	FW iATU configuration is enabled.
+ *					This bit if set, means the iATU has been
+ *					configured and is ready for use.
+ *					Initialized in: ppboot
+ *
+ * CPU_BOOT_DEV_STS0_FW_NIC_MAC_EN	NIC MAC channels init is done by FW and
+ *					any access to them is done via the FW.
+ *					Initialized in: linux
+ *
+ * CPU_BOOT_DEV_STS0_DYN_PLL_EN		Dynamic PLL configuration is enabled.
+ *					FW sends to host a bitmap of supported
+ *					PLLs.
+ *					Initialized in: linux
+ *
+ * CPU_BOOT_DEV_STS0_GIC_PRIVILEGED_EN	GIC access permission only from
+ *					previleged entity. FW sets this status
+ *					bit for host. If this bit is set then
+ *					GIC can not be accessed from host.
+ *					Initialized in: linux
+ *
+ * CPU_BOOT_DEV_STS0_EQ_INDEX_EN	Event Queue (EQ) index is a running
+ *					index for each new event sent to host.
+ *					This is used as a method in host to
+ *					identify that the waiting event in
+ *					queue is actually a new event which
+ *					was not served before.
+ *					Initialized in: linux
+ *
+ * CPU_BOOT_DEV_STS0_MULTI_IRQ_POLL_EN	Use multiple scratchpad interfaces to
+ *					prevent IRQs overriding each other.
+ *					Initialized in: linux
+ *
+ * CPU_BOOT_DEV_STS0_FW_NIC_STAT_XPCS91_EN
+ *					NIC STAT and XPCS91 access is restricted
+ *					and is done via FW only.
+ *					Initialized in: linux
+ *
+ * CPU_BOOT_DEV_STS0_FW_NIC_STAT_EXT_EN
+ *					NIC STAT get all is supported.
+ *					Initialized in: linux
+ *
+ * CPU_BOOT_DEV_STS0_IS_IDLE_CHECK_EN
+ *					F/W checks if the device is idle by reading defined set
+ *					of registers. It returns a bitmask of all the engines,
+ *					where a bit is set if the engine is not idle.
+ *					Initialized in: linux
+ *
+ * CPU_BOOT_DEV_STS0_MAP_HWMON_EN
+ *					If set, means f/w supports proprietary
+ *					HWMON enum mapping to cpucp enums.
+ *					Initialized in: linux
+ *
+ * CPU_BOOT_DEV_STS0_ENABLED		Device status register enabled.
+ *					This is a main indication that the
+ *					running FW populates the device status
+ *					register. Meaning the device status
+ *					bits are not garbage, but actual
+ *					statuses.
+ *					Initialized in: preboot
+ *
+ */
+#define CPU_BOOT_DEV_STS0_SECURITY_EN		(1 << CPU_BOOT_DEV_STS_SECURITY_EN)
+#define CPU_BOOT_DEV_STS0_DEBUG_EN		(1 << CPU_BOOT_DEV_STS_DEBUG_EN)
+#define CPU_BOOT_DEV_STS0_WATCHDOG_EN		(1 << CPU_BOOT_DEV_STS_WATCHDOG_EN)
+#define CPU_BOOT_DEV_STS0_DRAM_INIT_EN		(1 << CPU_BOOT_DEV_STS_DRAM_INIT_EN)
+#define CPU_BOOT_DEV_STS0_BMC_WAIT_EN		(1 << CPU_BOOT_DEV_STS_BMC_WAIT_EN)
+#define CPU_BOOT_DEV_STS0_E2E_CRED_EN		(1 << CPU_BOOT_DEV_STS_E2E_CRED_EN)
+#define CPU_BOOT_DEV_STS0_HBM_CRED_EN		(1 << CPU_BOOT_DEV_STS_HBM_CRED_EN)
+#define CPU_BOOT_DEV_STS0_RL_EN			(1 << CPU_BOOT_DEV_STS_RL_EN)
+#define CPU_BOOT_DEV_STS0_SRAM_SCR_EN		(1 << CPU_BOOT_DEV_STS_SRAM_SCR_EN)
+#define CPU_BOOT_DEV_STS0_DRAM_SCR_EN		(1 << CPU_BOOT_DEV_STS_DRAM_SCR_EN)
+#define CPU_BOOT_DEV_STS0_FW_HARD_RST_EN	(1 << CPU_BOOT_DEV_STS_FW_HARD_RST_EN)
+#define CPU_BOOT_DEV_STS0_PLL_INFO_EN		(1 << CPU_BOOT_DEV_STS_PLL_INFO_EN)
+#define CPU_BOOT_DEV_STS0_SP_SRAM_EN		(1 << CPU_BOOT_DEV_STS_SP_SRAM_EN)
+#define CPU_BOOT_DEV_STS0_CLK_GATE_EN		(1 << CPU_BOOT_DEV_STS_CLK_GATE_EN)
+#define CPU_BOOT_DEV_STS0_HBM_ECC_EN		(1 << CPU_BOOT_DEV_STS_HBM_ECC_EN)
+#define CPU_BOOT_DEV_STS0_PKT_PI_ACK_EN		(1 << CPU_BOOT_DEV_STS_PKT_PI_ACK_EN)
+#define CPU_BOOT_DEV_STS0_FW_LD_COM_EN		(1 << CPU_BOOT_DEV_STS_FW_LD_COM_EN)
+#define CPU_BOOT_DEV_STS0_FW_IATU_CONF_EN	(1 << CPU_BOOT_DEV_STS_FW_IATU_CONF_EN)
+#define CPU_BOOT_DEV_STS0_FW_NIC_MAC_EN		(1 << CPU_BOOT_DEV_STS_FW_NIC_MAC_EN)
+#define CPU_BOOT_DEV_STS0_DYN_PLL_EN		(1 << CPU_BOOT_DEV_STS_DYN_PLL_EN)
+#define CPU_BOOT_DEV_STS0_GIC_PRIVILEGED_EN	(1 << CPU_BOOT_DEV_STS_GIC_PRIVILEGED_EN)
+#define CPU_BOOT_DEV_STS0_EQ_INDEX_EN		(1 << CPU_BOOT_DEV_STS_EQ_INDEX_EN)
+#define CPU_BOOT_DEV_STS0_MULTI_IRQ_POLL_EN	(1 << CPU_BOOT_DEV_STS_MULTI_IRQ_POLL_EN)
+#define CPU_BOOT_DEV_STS0_FW_NIC_STAT_XPCS91_EN	(1 << CPU_BOOT_DEV_STS_FW_NIC_STAT_XPCS91_EN)
+#define CPU_BOOT_DEV_STS0_FW_NIC_STAT_EXT_EN	(1 << CPU_BOOT_DEV_STS_FW_NIC_STAT_EXT_EN)
+#define CPU_BOOT_DEV_STS0_IS_IDLE_CHECK_EN	(1 << CPU_BOOT_DEV_STS_IS_IDLE_CHECK_EN)
+#define CPU_BOOT_DEV_STS0_MAP_HWMON_EN		(1 << CPU_BOOT_DEV_STS_MAP_HWMON_EN)
+#define CPU_BOOT_DEV_STS0_ENABLED		(1 << CPU_BOOT_DEV_STS_ENABLED)
+#define CPU_BOOT_DEV_STS1_ENABLED		(1 << CPU_BOOT_DEV_STS_ENABLED)
+
+enum cpu_boot_status {
+	CPU_BOOT_STATUS_NA = 0,		/* Default value after reset of chip */
+	CPU_BOOT_STATUS_IN_WFE = 1,
+	CPU_BOOT_STATUS_DRAM_RDY = 2,
+	CPU_BOOT_STATUS_SRAM_AVAIL = 3,
+	CPU_BOOT_STATUS_IN_BTL = 4,	/* BTL is H/W FSM */
+	CPU_BOOT_STATUS_IN_PREBOOT = 5,
+	CPU_BOOT_STATUS_IN_SPL,		/* deprecated - not reported */
+	CPU_BOOT_STATUS_IN_UBOOT = 7,
+	CPU_BOOT_STATUS_DRAM_INIT_FAIL,	/* deprecated - will be removed */
+	CPU_BOOT_STATUS_FIT_CORRUPTED,	/* deprecated - will be removed */
+	/* U-Boot console prompt activated, commands are not processed */
+	CPU_BOOT_STATUS_UBOOT_NOT_READY = 10,
+	/* Finished NICs init, reported after DRAM and NICs */
+	CPU_BOOT_STATUS_NIC_FW_RDY = 11,
+	CPU_BOOT_STATUS_TS_INIT_FAIL,	/* deprecated - will be removed */
+	CPU_BOOT_STATUS_DRAM_SKIPPED,	/* deprecated - will be removed */
+	CPU_BOOT_STATUS_BMC_WAITING_SKIPPED, /* deprecated - will be removed */
+	/* Last boot loader progress status, ready to receive commands */
+	CPU_BOOT_STATUS_READY_TO_BOOT = 15,
+	/* Internal Boot finished, ready for boot-fit */
+	CPU_BOOT_STATUS_WAITING_FOR_BOOT_FIT = 16,
+	/* Internal Security has been initialized, device can be accessed */
+	CPU_BOOT_STATUS_SECURITY_READY = 17,
+};
+
+enum kmd_msg {
+	KMD_MSG_NA = 0,
+	KMD_MSG_GOTO_WFE,
+	KMD_MSG_FIT_RDY,
+	KMD_MSG_SKIP_BMC,
+	RESERVED,
+	KMD_MSG_RST_DEV,
+	KMD_MSG_LAST
+};
+
+enum cpu_msg_status {
+	CPU_MSG_CLR = 0,
+	CPU_MSG_OK,
+	CPU_MSG_ERR,
+};
+
+/* communication registers mapping - consider ABI when changing */
+struct cpu_dyn_regs {
+	__le32 cpu_pq_base_addr_low;
+	__le32 cpu_pq_base_addr_high;
+	__le32 cpu_pq_length;
+	__le32 cpu_pq_init_status;
+	__le32 cpu_eq_base_addr_low;
+	__le32 cpu_eq_base_addr_high;
+	__le32 cpu_eq_length;
+	__le32 cpu_eq_ci;
+	__le32 cpu_cq_base_addr_low;
+	__le32 cpu_cq_base_addr_high;
+	__le32 cpu_cq_length;
+	__le32 cpu_pf_pq_pi;
+	__le32 cpu_boot_dev_sts0;
+	__le32 cpu_boot_dev_sts1;
+	__le32 cpu_boot_err0;
+	__le32 cpu_boot_err1;
+	__le32 cpu_boot_status;
+	__le32 fw_upd_sts;
+	__le32 fw_upd_cmd;
+	__le32 fw_upd_pending_sts;
+	__le32 fuse_ver_offset;
+	__le32 preboot_ver_offset;
+	__le32 uboot_ver_offset;
+	__le32 hw_state;
+	__le32 kmd_msg_to_cpu;
+	__le32 cpu_cmd_status_to_host;
+	__le32 gic_host_pi_upd_irq;
+	__le32 gic_tpc_qm_irq_ctrl;
+	__le32 gic_mme_qm_irq_ctrl;
+	__le32 gic_dma_qm_irq_ctrl;
+	__le32 gic_nic_qm_irq_ctrl;
+	__le32 gic_dma_core_irq_ctrl;
+	__le32 gic_host_halt_irq;
+	__le32 gic_host_ints_irq;
+	__le32 gic_host_soft_rst_irq;
+	__le32 gic_rot_qm_irq_ctrl;
+	__le32 cpu_rst_status;
+	__le32 eng_arc_irq_ctrl;
+	__le32 reserved1[20];		/* reserve for future use */
+};
+
+/* TODO: remove the desc magic after the code is updated to use message */
+/* HCDM - Habana Communications Descriptor Magic */
+#define HL_COMMS_DESC_MAGIC	0x4843444D
+#define HL_COMMS_DESC_VER	1
+
+/* HCMv - Habana Communications Message + header version */
+#define HL_COMMS_MSG_MAGIC_VALUE	0x48434D00
+#define HL_COMMS_MSG_MAGIC_MASK		0xFFFFFF00
+#define HL_COMMS_MSG_MAGIC_VER_MASK	0xFF
+
+#define HL_COMMS_MSG_MAGIC_VER(ver)	(HL_COMMS_MSG_MAGIC_VALUE |	\
+					((ver) & HL_COMMS_MSG_MAGIC_VER_MASK))
+#define HL_COMMS_MSG_MAGIC_V0		HL_COMMS_DESC_MAGIC
+#define HL_COMMS_MSG_MAGIC_V1		HL_COMMS_MSG_MAGIC_VER(1)
+
+#define HL_COMMS_MSG_MAGIC		HL_COMMS_MSG_MAGIC_V1
+
+#define HL_COMMS_MSG_MAGIC_VALIDATE_MAGIC(magic)			\
+		(((magic) & HL_COMMS_MSG_MAGIC_MASK) ==			\
+		HL_COMMS_MSG_MAGIC_VALUE)
+
+#define HL_COMMS_MSG_MAGIC_VALIDATE_VERSION(magic, ver)			\
+		(((magic) & HL_COMMS_MSG_MAGIC_VER_MASK) >=		\
+		((ver) & HL_COMMS_MSG_MAGIC_VER_MASK))
+
+#define HL_COMMS_MSG_MAGIC_VALIDATE(magic, ver)				\
+		(HL_COMMS_MSG_MAGIC_VALIDATE_MAGIC((magic)) &&		\
+		HL_COMMS_MSG_MAGIC_VALIDATE_VERSION((magic), (ver)))
+
+enum comms_msg_type {
+	HL_COMMS_DESC_TYPE = 0,
+	HL_COMMS_RESET_CAUSE_TYPE = 1,
+	HL_COMMS_FW_CFG_SKIP_TYPE = 2,
+	HL_COMMS_BINNING_CONF_TYPE = 3,
+};
+
+/*
+ * Binning information shared between LKD and FW
+ * @tpc_mask - TPC binning information
+ * @dec_mask - Decoder binning information
+ * @hbm_mask - HBM binning information
+ * @edma_mask - EDMA binning information
+ * @mme_mask_l - MME binning information lower 32
+ * @mme_mask_h - MME binning information upper 32
+ * @reserved - reserved field for 64 bit alignment
+ */
+struct lkd_fw_binning_info {
+	__le64 tpc_mask;
+	__le32 dec_mask;
+	__le32 hbm_mask;
+	__le32 edma_mask;
+	__le32 mme_mask_l;
+	__le32 mme_mask_h;
+	__le32 reserved;
+};
+
+/* TODO: remove this struct after the code is updated to use message */
+/* this is the comms descriptor header - meta data */
+struct comms_desc_header {
+	__le32 magic;		/* magic for validation */
+	__le32 crc32;		/* CRC32 of the descriptor w/o header */
+	__le16 size;		/* size of the descriptor w/o header */
+	__u8 version;	/* descriptor version */
+	__u8 reserved[5];	/* pad to 64 bit */
+};
+
+/* this is the comms message header - meta data */
+struct comms_msg_header {
+	__le32 magic;		/* magic for validation */
+	__le32 crc32;		/* CRC32 of the message w/o header */
+	__le16 size;		/* size of the message w/o header */
+	__u8 version;	/* message payload version */
+	__u8 type;		/* message type */
+	__u8 reserved[4];	/* pad to 64 bit */
+};
+
+/* this is the main FW descriptor - consider ABI when changing */
+struct lkd_fw_comms_desc {
+	struct comms_desc_header header;
+	struct cpu_dyn_regs cpu_dyn_regs;
+	char fuse_ver[VERSION_MAX_LEN];
+	char cur_fw_ver[VERSION_MAX_LEN];
+	/* can be used for 1 more version w/o ABI change */
+	char reserved0[VERSION_MAX_LEN];
+	__le64 img_addr;	/* address for next FW component load */
+};
+
+enum comms_reset_cause {
+	HL_RESET_CAUSE_UNKNOWN = 0,
+	HL_RESET_CAUSE_HEARTBEAT = 1,
+	HL_RESET_CAUSE_TDR = 2,
+};
+
+/* TODO: remove define after struct name is aligned on all projects */
+#define lkd_msg_comms lkd_fw_comms_msg
+
+/* this is the comms message descriptor */
+struct lkd_fw_comms_msg {
+	struct comms_msg_header header;
+	/* union for future expantions of new messages */
+	union {
+		struct {
+			struct cpu_dyn_regs cpu_dyn_regs;
+			char fuse_ver[VERSION_MAX_LEN];
+			char cur_fw_ver[VERSION_MAX_LEN];
+			/* can be used for 1 more version w/o ABI change */
+			char reserved0[VERSION_MAX_LEN];
+			/* address for next FW component load */
+			__le64 img_addr;
+		};
+		struct {
+			__u8 reset_cause;
+		};
+		struct {
+			__u8 fw_cfg_skip; /* 1 - skip, 0 - don't skip */
+		};
+		struct lkd_fw_binning_info binning_info;
+	};
+};
+
+/*
+ * LKD commands:
+ *
+ * COMMS_NOOP			Used to clear the command register and no actual
+ *				command is send.
+ *
+ * COMMS_CLR_STS		Clear status command - FW should clear the
+ *				status register. Used for synchronization
+ *				between the commands as part of the race free
+ *				protocol.
+ *
+ * COMMS_RST_STATE		Reset the current communication state which is
+ *				kept by FW for proper responses.
+ *				Should be used in the beginning of the
+ *				communication cycle to clean any leftovers from
+ *				previous communication attempts.
+ *
+ * COMMS_PREP_DESC		Prepare descriptor for setting up the
+ *				communication and other dynamic data:
+ *				struct lkd_fw_comms_desc.
+ *				This command has a parameter stating the next FW
+ *				component size, so the FW can actually prepare a
+ *				space for it and in the status response provide
+ *				the descriptor offset. The Offset of the next FW
+ *				data component is a part of the descriptor
+ *				structure.
+ *
+ * COMMS_DATA_RDY		The FW data has been uploaded and is ready for
+ *				validation.
+ *
+ * COMMS_EXEC			Execute the next FW component.
+ *
+ * COMMS_RST_DEV		Reset the device.
+ *
+ * COMMS_GOTO_WFE		Execute WFE command. Allowed only on non-secure
+ *				devices.
+ *
+ * COMMS_SKIP_BMC		Perform actions required for BMC-less servers.
+ *				Do not wait for BMC response.
+ *
+ * COMMS_PREP_DESC_ELBI		Same as COMMS_PREP_DESC only that the memory
+ *				space is allocated in a ELBI access only
+ *				address range.
+ *
+ */
+enum comms_cmd {
+	COMMS_NOOP = 0,
+	COMMS_CLR_STS = 1,
+	COMMS_RST_STATE = 2,
+	COMMS_PREP_DESC = 3,
+	COMMS_DATA_RDY = 4,
+	COMMS_EXEC = 5,
+	COMMS_RST_DEV = 6,
+	COMMS_GOTO_WFE = 7,
+	COMMS_SKIP_BMC = 8,
+	COMMS_PREP_DESC_ELBI = 10,
+	COMMS_INVLD_LAST
+};
+
+#define COMMS_COMMAND_SIZE_SHIFT	0
+#define COMMS_COMMAND_SIZE_MASK		0x1FFFFFF
+#define COMMS_COMMAND_CMD_SHIFT		27
+#define COMMS_COMMAND_CMD_MASK		0xF8000000
+
+/*
+ * LKD command to FW register structure
+ * @size	- FW component size
+ * @cmd		- command from enum comms_cmd
+ */
+struct comms_command {
+	union {		/* bit fields are only for FW use */
+		struct {
+			u32 size :25;		/* 32MB max. */
+			u32 reserved :2;
+			enum comms_cmd cmd :5;		/* 32 commands */
+		};
+		__le32 val;
+	};
+};
+
+/*
+ * FW status
+ *
+ * COMMS_STS_NOOP		Used to clear the status register and no actual
+ *				status is provided.
+ *
+ * COMMS_STS_ACK		Command has been received and recognized.
+ *
+ * COMMS_STS_OK			Command execution has finished successfully.
+ *
+ * COMMS_STS_ERR		Command execution was unsuccessful and resulted
+ *				in error.
+ *
+ * COMMS_STS_VALID_ERR		FW validation has failed.
+ *
+ * COMMS_STS_TIMEOUT_ERR	Command execution has timed out.
+ */
+enum comms_sts {
+	COMMS_STS_NOOP = 0,
+	COMMS_STS_ACK = 1,
+	COMMS_STS_OK = 2,
+	COMMS_STS_ERR = 3,
+	COMMS_STS_VALID_ERR = 4,
+	COMMS_STS_TIMEOUT_ERR = 5,
+	COMMS_STS_INVLD_LAST
+};
+
+/* RAM types for FW components loading - defines the base address */
+enum comms_ram_types {
+	COMMS_SRAM = 0,
+	COMMS_DRAM = 1,
+};
+
+#define COMMS_STATUS_OFFSET_SHIFT	0
+#define COMMS_STATUS_OFFSET_MASK	0x03FFFFFF
+#define COMMS_STATUS_OFFSET_ALIGN_SHIFT	2
+#define COMMS_STATUS_RAM_TYPE_SHIFT	26
+#define COMMS_STATUS_RAM_TYPE_MASK	0x0C000000
+#define COMMS_STATUS_STATUS_SHIFT	28
+#define COMMS_STATUS_STATUS_MASK	0xF0000000
+
+/*
+ * FW status to LKD register structure
+ * @offset	- an offset from the base of the ram_type shifted right by
+ *		  2 bits (always aligned to 32 bits).
+ *		  Allows a maximum addressable offset of 256MB from RAM base.
+ *		  Example: for real offset in RAM of 0x800000 (8MB), the value
+ *		  in offset field is (0x800000 >> 2) = 0x200000.
+ * @ram_type	- the RAM type that should be used for offset from
+ *		  enum comms_ram_types
+ * @status	- status from enum comms_sts
+ */
+struct comms_status {
+	union {		/* bit fields are only for FW use */
+		struct {
+			u32 offset :26;
+			enum comms_ram_types ram_type :2;
+			enum comms_sts status :4;	/* 16 statuses */
+		};
+		__le32 val;
+	};
+};
+
+#endif /* HL_BOOT_IF_H */