Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 472 insertions, 0 deletions

diff --git a/drivers/misc/isl29003.c b/drivers/misc/isl29003.c
new file mode 100644
index 000000000..aeda2fa89
--- /dev/null
+++ b/drivers/misc/isl29003.c
@@ -0,0 +1,472 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  isl29003.c - Linux kernel module for
+ * 	Intersil ISL29003 ambient light sensor
+ *
+ *  See file:Documentation/misc-devices/isl29003.rst
+ *
+ *  Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ *  Based on code written by
+ *  	Rodolfo Giometti <giometti@linux.it>
+ *  	Eurotech S.p.A. <info@eurotech.it>
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+
+#define ISL29003_DRV_NAME	"isl29003"
+#define DRIVER_VERSION		"1.0"
+
+#define ISL29003_REG_COMMAND		0x00
+#define ISL29003_ADC_ENABLED		(1 << 7)
+#define ISL29003_ADC_PD			(1 << 6)
+#define ISL29003_TIMING_INT		(1 << 5)
+#define ISL29003_MODE_SHIFT		(2)
+#define ISL29003_MODE_MASK		(0x3 << ISL29003_MODE_SHIFT)
+#define ISL29003_RES_SHIFT		(0)
+#define ISL29003_RES_MASK		(0x3 << ISL29003_RES_SHIFT)
+
+#define ISL29003_REG_CONTROL		0x01
+#define ISL29003_INT_FLG		(1 << 5)
+#define ISL29003_RANGE_SHIFT		(2)
+#define ISL29003_RANGE_MASK		(0x3 << ISL29003_RANGE_SHIFT)
+#define ISL29003_INT_PERSISTS_SHIFT	(0)
+#define ISL29003_INT_PERSISTS_MASK	(0xf << ISL29003_INT_PERSISTS_SHIFT)
+
+#define ISL29003_REG_IRQ_THRESH_HI	0x02
+#define ISL29003_REG_IRQ_THRESH_LO	0x03
+#define ISL29003_REG_LSB_SENSOR		0x04
+#define ISL29003_REG_MSB_SENSOR		0x05
+#define ISL29003_REG_LSB_TIMER		0x06
+#define ISL29003_REG_MSB_TIMER		0x07
+
+#define ISL29003_NUM_CACHABLE_REGS	4
+
+struct isl29003_data {
+	struct i2c_client *client;
+	struct mutex lock;
+	u8 reg_cache[ISL29003_NUM_CACHABLE_REGS];
+	u8 power_state_before_suspend;
+};
+
+static int gain_range[] = {
+	1000, 4000, 16000, 64000
+};
+
+/*
+ * register access helpers
+ */
+
+static int __isl29003_read_reg(struct i2c_client *client,
+			       u32 reg, u8 mask, u8 shift)
+{
+	struct isl29003_data *data = i2c_get_clientdata(client);
+
+	return (data->reg_cache[reg] & mask) >> shift;
+}
+
+static int __isl29003_write_reg(struct i2c_client *client,
+				u32 reg, u8 mask, u8 shift, u8 val)
+{
+	struct isl29003_data *data = i2c_get_clientdata(client);
+	int ret = 0;
+	u8 tmp;
+
+	if (reg >= ISL29003_NUM_CACHABLE_REGS)
+		return -EINVAL;
+
+	mutex_lock(&data->lock);
+
+	tmp = data->reg_cache[reg];
+	tmp &= ~mask;
+	tmp |= val << shift;
+
+	ret = i2c_smbus_write_byte_data(client, reg, tmp);
+	if (!ret)
+		data->reg_cache[reg] = tmp;
+
+	mutex_unlock(&data->lock);
+	return ret;
+}
+
+/*
+ * internally used functions
+ */
+
+/* range */
+static int isl29003_get_range(struct i2c_client *client)
+{
+	return __isl29003_read_reg(client, ISL29003_REG_CONTROL,
+		ISL29003_RANGE_MASK, ISL29003_RANGE_SHIFT);
+}
+
+static int isl29003_set_range(struct i2c_client *client, int range)
+{
+	return __isl29003_write_reg(client, ISL29003_REG_CONTROL,
+		ISL29003_RANGE_MASK, ISL29003_RANGE_SHIFT, range);
+}
+
+/* resolution */
+static int isl29003_get_resolution(struct i2c_client *client)
+{
+	return __isl29003_read_reg(client, ISL29003_REG_COMMAND,
+		ISL29003_RES_MASK, ISL29003_RES_SHIFT);
+}
+
+static int isl29003_set_resolution(struct i2c_client *client, int res)
+{
+	return __isl29003_write_reg(client, ISL29003_REG_COMMAND,
+		ISL29003_RES_MASK, ISL29003_RES_SHIFT, res);
+}
+
+/* mode */
+static int isl29003_get_mode(struct i2c_client *client)
+{
+	return __isl29003_read_reg(client, ISL29003_REG_COMMAND,
+		ISL29003_MODE_MASK, ISL29003_MODE_SHIFT);
+}
+
+static int isl29003_set_mode(struct i2c_client *client, int mode)
+{
+	return __isl29003_write_reg(client, ISL29003_REG_COMMAND,
+		ISL29003_MODE_MASK, ISL29003_MODE_SHIFT, mode);
+}
+
+/* power_state */
+static int isl29003_set_power_state(struct i2c_client *client, int state)
+{
+	return __isl29003_write_reg(client, ISL29003_REG_COMMAND,
+				ISL29003_ADC_ENABLED | ISL29003_ADC_PD, 0,
+				state ? ISL29003_ADC_ENABLED : ISL29003_ADC_PD);
+}
+
+static int isl29003_get_power_state(struct i2c_client *client)
+{
+	struct isl29003_data *data = i2c_get_clientdata(client);
+	u8 cmdreg = data->reg_cache[ISL29003_REG_COMMAND];
+
+	return ~cmdreg & ISL29003_ADC_PD;
+}
+
+static int isl29003_get_adc_value(struct i2c_client *client)
+{
+	struct isl29003_data *data = i2c_get_clientdata(client);
+	int lsb, msb, range, bitdepth;
+
+	mutex_lock(&data->lock);
+	lsb = i2c_smbus_read_byte_data(client, ISL29003_REG_LSB_SENSOR);
+
+	if (lsb < 0) {
+		mutex_unlock(&data->lock);
+		return lsb;
+	}
+
+	msb = i2c_smbus_read_byte_data(client, ISL29003_REG_MSB_SENSOR);
+	mutex_unlock(&data->lock);
+
+	if (msb < 0)
+		return msb;
+
+	range = isl29003_get_range(client);
+	bitdepth = (4 - isl29003_get_resolution(client)) * 4;
+	return (((msb << 8) | lsb) * gain_range[range]) >> bitdepth;
+}
+
+/*
+ * sysfs layer
+ */
+
+/* range */
+static ssize_t isl29003_show_range(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return sprintf(buf, "%i\n", isl29003_get_range(client));
+}
+
+static ssize_t isl29003_store_range(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	if (val > 3)
+		return -EINVAL;
+
+	ret = isl29003_set_range(client, val);
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static DEVICE_ATTR(range, S_IWUSR | S_IRUGO,
+		   isl29003_show_range, isl29003_store_range);
+
+
+/* resolution */
+static ssize_t isl29003_show_resolution(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return sprintf(buf, "%d\n", isl29003_get_resolution(client));
+}
+
+static ssize_t isl29003_store_resolution(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	if (val > 3)
+		return -EINVAL;
+
+	ret = isl29003_set_resolution(client, val);
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static DEVICE_ATTR(resolution, S_IWUSR | S_IRUGO,
+		   isl29003_show_resolution, isl29003_store_resolution);
+
+/* mode */
+static ssize_t isl29003_show_mode(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return sprintf(buf, "%d\n", isl29003_get_mode(client));
+}
+
+static ssize_t isl29003_store_mode(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	if (val > 2)
+		return -EINVAL;
+
+	ret = isl29003_set_mode(client, val);
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static DEVICE_ATTR(mode, S_IWUSR | S_IRUGO,
+		   isl29003_show_mode, isl29003_store_mode);
+
+
+/* power state */
+static ssize_t isl29003_show_power_state(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return sprintf(buf, "%d\n", isl29003_get_power_state(client));
+}
+
+static ssize_t isl29003_store_power_state(struct device *dev,
+					  struct device_attribute *attr,
+					  const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	if (val > 1)
+		return -EINVAL;
+
+	ret = isl29003_set_power_state(client, val);
+	return ret ? ret : count;
+}
+
+static DEVICE_ATTR(power_state, S_IWUSR | S_IRUGO,
+		   isl29003_show_power_state, isl29003_store_power_state);
+
+
+/* lux */
+static ssize_t isl29003_show_lux(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	/* No LUX data if not operational */
+	if (!isl29003_get_power_state(client))
+		return -EBUSY;
+
+	return sprintf(buf, "%d\n", isl29003_get_adc_value(client));
+}
+
+static DEVICE_ATTR(lux, S_IRUGO, isl29003_show_lux, NULL);
+
+static struct attribute *isl29003_attributes[] = {
+	&dev_attr_range.attr,
+	&dev_attr_resolution.attr,
+	&dev_attr_mode.attr,
+	&dev_attr_power_state.attr,
+	&dev_attr_lux.attr,
+	NULL
+};
+
+static const struct attribute_group isl29003_attr_group = {
+	.attrs = isl29003_attributes,
+};
+
+static int isl29003_init_client(struct i2c_client *client)
+{
+	struct isl29003_data *data = i2c_get_clientdata(client);
+	int i;
+
+	/* read all the registers once to fill the cache.
+	 * if one of the reads fails, we consider the init failed */
+	for (i = 0; i < ARRAY_SIZE(data->reg_cache); i++) {
+		int v = i2c_smbus_read_byte_data(client, i);
+
+		if (v < 0)
+			return -ENODEV;
+
+		data->reg_cache[i] = v;
+	}
+
+	/* set defaults */
+	isl29003_set_range(client, 0);
+	isl29003_set_resolution(client, 0);
+	isl29003_set_mode(client, 0);
+	isl29003_set_power_state(client, 0);
+
+	return 0;
+}
+
+/*
+ * I2C layer
+ */
+
+static int isl29003_probe(struct i2c_client *client)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	struct isl29003_data *data;
+	int err = 0;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
+		return -EIO;
+
+	data = kzalloc(sizeof(struct isl29003_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->client = client;
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->lock);
+
+	/* initialize the ISL29003 chip */
+	err = isl29003_init_client(client);
+	if (err)
+		goto exit_kfree;
+
+	/* register sysfs hooks */
+	err = sysfs_create_group(&client->dev.kobj, &isl29003_attr_group);
+	if (err)
+		goto exit_kfree;
+
+	dev_info(&client->dev, "driver version %s enabled\n", DRIVER_VERSION);
+	return 0;
+
+exit_kfree:
+	kfree(data);
+	return err;
+}
+
+static void isl29003_remove(struct i2c_client *client)
+{
+	sysfs_remove_group(&client->dev.kobj, &isl29003_attr_group);
+	isl29003_set_power_state(client, 0);
+	kfree(i2c_get_clientdata(client));
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int isl29003_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct isl29003_data *data = i2c_get_clientdata(client);
+
+	data->power_state_before_suspend = isl29003_get_power_state(client);
+	return isl29003_set_power_state(client, 0);
+}
+
+static int isl29003_resume(struct device *dev)
+{
+	int i;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct isl29003_data *data = i2c_get_clientdata(client);
+
+	/* restore registers from cache */
+	for (i = 0; i < ARRAY_SIZE(data->reg_cache); i++)
+		if (i2c_smbus_write_byte_data(client, i, data->reg_cache[i]))
+			return -EIO;
+
+	return isl29003_set_power_state(client,
+		data->power_state_before_suspend);
+}
+
+static SIMPLE_DEV_PM_OPS(isl29003_pm_ops, isl29003_suspend, isl29003_resume);
+#define ISL29003_PM_OPS (&isl29003_pm_ops)
+
+#else
+#define ISL29003_PM_OPS NULL
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct i2c_device_id isl29003_id[] = {
+	{ "isl29003", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, isl29003_id);
+
+static struct i2c_driver isl29003_driver = {
+	.driver = {
+		.name	= ISL29003_DRV_NAME,
+		.pm	= ISL29003_PM_OPS,
+	},
+	.probe_new = isl29003_probe,
+	.remove	= isl29003_remove,
+	.id_table = isl29003_id,
+};
+
+module_i2c_driver(isl29003_driver);
+
+MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
+MODULE_DESCRIPTION("ISL29003 ambient light sensor driver");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(DRIVER_VERSION);