Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 937 insertions, 0 deletions

diff --git a/drivers/misc/ocxl/config.c b/drivers/misc/ocxl/config.c
new file mode 100644
index 000000000..92ab49705
--- /dev/null
+++ b/drivers/misc/ocxl/config.c
@@ -0,0 +1,937 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2017 IBM Corp.
+#include <linux/pci.h>
+#include <asm/pnv-ocxl.h>
+#include <misc/ocxl-config.h>
+#include "ocxl_internal.h"
+
+#define EXTRACT_BIT(val, bit) (!!(val & BIT(bit)))
+#define EXTRACT_BITS(val, s, e) ((val & GENMASK(e, s)) >> s)
+
+#define OCXL_DVSEC_AFU_IDX_MASK              GENMASK(5, 0)
+#define OCXL_DVSEC_ACTAG_MASK                GENMASK(11, 0)
+#define OCXL_DVSEC_PASID_MASK                GENMASK(19, 0)
+#define OCXL_DVSEC_PASID_LOG_MASK            GENMASK(4, 0)
+
+#define OCXL_DVSEC_TEMPL_VERSION         0x0
+#define OCXL_DVSEC_TEMPL_NAME            0x4
+#define OCXL_DVSEC_TEMPL_AFU_VERSION     0x1C
+#define OCXL_DVSEC_TEMPL_MMIO_GLOBAL     0x20
+#define OCXL_DVSEC_TEMPL_MMIO_GLOBAL_SZ  0x28
+#define OCXL_DVSEC_TEMPL_MMIO_PP         0x30
+#define OCXL_DVSEC_TEMPL_MMIO_PP_SZ      0x38
+#define OCXL_DVSEC_TEMPL_ALL_MEM_SZ      0x3C
+#define OCXL_DVSEC_TEMPL_LPC_MEM_START   0x40
+#define OCXL_DVSEC_TEMPL_WWID            0x48
+#define OCXL_DVSEC_TEMPL_LPC_MEM_SZ      0x58
+
+#define OCXL_MAX_AFU_PER_FUNCTION 64
+#define OCXL_TEMPL_LEN_1_0        0x58
+#define OCXL_TEMPL_LEN_1_1        0x60
+#define OCXL_TEMPL_NAME_LEN       24
+#define OCXL_CFG_TIMEOUT     3
+
+static int find_dvsec(struct pci_dev *dev, int dvsec_id)
+{
+	return pci_find_dvsec_capability(dev, PCI_VENDOR_ID_IBM, dvsec_id);
+}
+
+static int find_dvsec_afu_ctrl(struct pci_dev *dev, u8 afu_idx)
+{
+	int vsec = 0;
+	u16 vendor, id;
+	u8 idx;
+
+	while ((vsec = pci_find_next_ext_capability(dev, vsec,
+						    OCXL_EXT_CAP_ID_DVSEC))) {
+		pci_read_config_word(dev, vsec + OCXL_DVSEC_VENDOR_OFFSET,
+				&vendor);
+		pci_read_config_word(dev, vsec + OCXL_DVSEC_ID_OFFSET, &id);
+
+		if (vendor == PCI_VENDOR_ID_IBM &&
+			id == OCXL_DVSEC_AFU_CTRL_ID) {
+			pci_read_config_byte(dev,
+					vsec + OCXL_DVSEC_AFU_CTRL_AFU_IDX,
+					&idx);
+			if (idx == afu_idx)
+				return vsec;
+		}
+	}
+	return 0;
+}
+
+/**
+ * get_function_0() - Find a related PCI device (function 0)
+ * @dev: PCI device to match
+ *
+ * Returns a pointer to the related device, or null if not found
+ */
+static struct pci_dev *get_function_0(struct pci_dev *dev)
+{
+	unsigned int devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 0);
+
+	return pci_get_domain_bus_and_slot(pci_domain_nr(dev->bus),
+					   dev->bus->number, devfn);
+}
+
+static void read_pasid(struct pci_dev *dev, struct ocxl_fn_config *fn)
+{
+	u16 val;
+	int pos;
+
+	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_PASID);
+	if (!pos) {
+		/*
+		 * PASID capability is not mandatory, but there
+		 * shouldn't be any AFU
+		 */
+		dev_dbg(&dev->dev, "Function doesn't require any PASID\n");
+		fn->max_pasid_log = -1;
+		goto out;
+	}
+	pci_read_config_word(dev, pos + PCI_PASID_CAP, &val);
+	fn->max_pasid_log = EXTRACT_BITS(val, 8, 12);
+
+out:
+	dev_dbg(&dev->dev, "PASID capability:\n");
+	dev_dbg(&dev->dev, "  Max PASID log = %d\n", fn->max_pasid_log);
+}
+
+static int read_dvsec_tl(struct pci_dev *dev, struct ocxl_fn_config *fn)
+{
+	int pos;
+
+	pos = find_dvsec(dev, OCXL_DVSEC_TL_ID);
+	if (!pos && PCI_FUNC(dev->devfn) == 0) {
+		dev_err(&dev->dev, "Can't find TL DVSEC\n");
+		return -ENODEV;
+	}
+	if (pos && PCI_FUNC(dev->devfn) != 0) {
+		dev_err(&dev->dev, "TL DVSEC is only allowed on function 0\n");
+		return -ENODEV;
+	}
+	fn->dvsec_tl_pos = pos;
+	return 0;
+}
+
+static int read_dvsec_function(struct pci_dev *dev, struct ocxl_fn_config *fn)
+{
+	int pos, afu_present;
+	u32 val;
+
+	pos = find_dvsec(dev, OCXL_DVSEC_FUNC_ID);
+	if (!pos) {
+		dev_err(&dev->dev, "Can't find function DVSEC\n");
+		return -ENODEV;
+	}
+	fn->dvsec_function_pos = pos;
+
+	pci_read_config_dword(dev, pos + OCXL_DVSEC_FUNC_OFF_INDEX, &val);
+	afu_present = EXTRACT_BIT(val, 31);
+	if (!afu_present) {
+		fn->max_afu_index = -1;
+		dev_dbg(&dev->dev, "Function doesn't define any AFU\n");
+		goto out;
+	}
+	fn->max_afu_index = EXTRACT_BITS(val, 24, 29);
+
+out:
+	dev_dbg(&dev->dev, "Function DVSEC:\n");
+	dev_dbg(&dev->dev, "  Max AFU index = %d\n", fn->max_afu_index);
+	return 0;
+}
+
+static int read_dvsec_afu_info(struct pci_dev *dev, struct ocxl_fn_config *fn)
+{
+	int pos;
+
+	if (fn->max_afu_index < 0) {
+		fn->dvsec_afu_info_pos = -1;
+		return 0;
+	}
+
+	pos = find_dvsec(dev, OCXL_DVSEC_AFU_INFO_ID);
+	if (!pos) {
+		dev_err(&dev->dev, "Can't find AFU information DVSEC\n");
+		return -ENODEV;
+	}
+	fn->dvsec_afu_info_pos = pos;
+	return 0;
+}
+
+static int read_dvsec_vendor(struct pci_dev *dev)
+{
+	int pos;
+	u32 cfg, tlx, dlx, reset_reload;
+
+	/*
+	 * vendor specific DVSEC, for IBM images only. Some older
+	 * images may not have it
+	 *
+	 * It's only used on function 0 to specify the version of some
+	 * logic blocks and to give access to special registers to
+	 * enable host-based flashing.
+	 */
+	if (PCI_FUNC(dev->devfn) != 0)
+		return 0;
+
+	pos = find_dvsec(dev, OCXL_DVSEC_VENDOR_ID);
+	if (!pos)
+		return 0;
+
+	pci_read_config_dword(dev, pos + OCXL_DVSEC_VENDOR_CFG_VERS, &cfg);
+	pci_read_config_dword(dev, pos + OCXL_DVSEC_VENDOR_TLX_VERS, &tlx);
+	pci_read_config_dword(dev, pos + OCXL_DVSEC_VENDOR_DLX_VERS, &dlx);
+	pci_read_config_dword(dev, pos + OCXL_DVSEC_VENDOR_RESET_RELOAD,
+			      &reset_reload);
+
+	dev_dbg(&dev->dev, "Vendor specific DVSEC:\n");
+	dev_dbg(&dev->dev, "  CFG version = 0x%x\n", cfg);
+	dev_dbg(&dev->dev, "  TLX version = 0x%x\n", tlx);
+	dev_dbg(&dev->dev, "  DLX version = 0x%x\n", dlx);
+	dev_dbg(&dev->dev, "  ResetReload = 0x%x\n", reset_reload);
+	return 0;
+}
+
+/**
+ * get_dvsec_vendor0() - Find a related PCI device (function 0)
+ * @dev: PCI device to match
+ * @dev0: The PCI device (function 0) found
+ * @out_pos: The position of PCI device (function 0)
+ *
+ * Returns 0 on success, negative on failure.
+ *
+ * NOTE: If it's successful, the reference of dev0 is increased,
+ * so after using it, the callers must call pci_dev_put() to give
+ * up the reference.
+ */
+static int get_dvsec_vendor0(struct pci_dev *dev, struct pci_dev **dev0,
+			     int *out_pos)
+{
+	int pos;
+
+	if (PCI_FUNC(dev->devfn) != 0) {
+		dev = get_function_0(dev);
+		if (!dev)
+			return -1;
+	} else {
+		dev = pci_dev_get(dev);
+	}
+	pos = find_dvsec(dev, OCXL_DVSEC_VENDOR_ID);
+	if (!pos) {
+		pci_dev_put(dev);
+		return -1;
+	}
+	*dev0 = dev;
+	*out_pos = pos;
+	return 0;
+}
+
+int ocxl_config_get_reset_reload(struct pci_dev *dev, int *val)
+{
+	struct pci_dev *dev0;
+	u32 reset_reload;
+	int pos;
+
+	if (get_dvsec_vendor0(dev, &dev0, &pos))
+		return -1;
+
+	pci_read_config_dword(dev0, pos + OCXL_DVSEC_VENDOR_RESET_RELOAD,
+			      &reset_reload);
+	pci_dev_put(dev0);
+	*val = !!(reset_reload & BIT(0));
+	return 0;
+}
+
+int ocxl_config_set_reset_reload(struct pci_dev *dev, int val)
+{
+	struct pci_dev *dev0;
+	u32 reset_reload;
+	int pos;
+
+	if (get_dvsec_vendor0(dev, &dev0, &pos))
+		return -1;
+
+	pci_read_config_dword(dev0, pos + OCXL_DVSEC_VENDOR_RESET_RELOAD,
+			      &reset_reload);
+	if (val)
+		reset_reload |= BIT(0);
+	else
+		reset_reload &= ~BIT(0);
+	pci_write_config_dword(dev0, pos + OCXL_DVSEC_VENDOR_RESET_RELOAD,
+			       reset_reload);
+	pci_dev_put(dev0);
+	return 0;
+}
+
+static int validate_function(struct pci_dev *dev, struct ocxl_fn_config *fn)
+{
+	if (fn->max_pasid_log == -1 && fn->max_afu_index >= 0) {
+		dev_err(&dev->dev,
+			"AFUs are defined but no PASIDs are requested\n");
+		return -EINVAL;
+	}
+
+	if (fn->max_afu_index > OCXL_MAX_AFU_PER_FUNCTION) {
+		dev_err(&dev->dev,
+			"Max AFU index out of architectural limit (%d vs %d)\n",
+			fn->max_afu_index, OCXL_MAX_AFU_PER_FUNCTION);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+int ocxl_config_read_function(struct pci_dev *dev, struct ocxl_fn_config *fn)
+{
+	int rc;
+
+	read_pasid(dev, fn);
+
+	rc = read_dvsec_tl(dev, fn);
+	if (rc) {
+		dev_err(&dev->dev,
+			"Invalid Transaction Layer DVSEC configuration: %d\n",
+			rc);
+		return -ENODEV;
+	}
+
+	rc = read_dvsec_function(dev, fn);
+	if (rc) {
+		dev_err(&dev->dev,
+			"Invalid Function DVSEC configuration: %d\n", rc);
+		return -ENODEV;
+	}
+
+	rc = read_dvsec_afu_info(dev, fn);
+	if (rc) {
+		dev_err(&dev->dev, "Invalid AFU configuration: %d\n", rc);
+		return -ENODEV;
+	}
+
+	rc = read_dvsec_vendor(dev);
+	if (rc) {
+		dev_err(&dev->dev,
+			"Invalid vendor specific DVSEC configuration: %d\n",
+			rc);
+		return -ENODEV;
+	}
+
+	rc = validate_function(dev, fn);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ocxl_config_read_function);
+
+static int read_afu_info(struct pci_dev *dev, struct ocxl_fn_config *fn,
+			int offset, u32 *data)
+{
+	u32 val;
+	unsigned long timeout = jiffies + (HZ * OCXL_CFG_TIMEOUT);
+	int pos = fn->dvsec_afu_info_pos;
+
+	/* Protect 'data valid' bit */
+	if (EXTRACT_BIT(offset, 31)) {
+		dev_err(&dev->dev, "Invalid offset in AFU info DVSEC\n");
+		return -EINVAL;
+	}
+
+	pci_write_config_dword(dev, pos + OCXL_DVSEC_AFU_INFO_OFF, offset);
+	pci_read_config_dword(dev, pos + OCXL_DVSEC_AFU_INFO_OFF, &val);
+	while (!EXTRACT_BIT(val, 31)) {
+		if (time_after_eq(jiffies, timeout)) {
+			dev_err(&dev->dev,
+				"Timeout while reading AFU info DVSEC (offset=%d)\n",
+				offset);
+			return -EBUSY;
+		}
+		cpu_relax();
+		pci_read_config_dword(dev, pos + OCXL_DVSEC_AFU_INFO_OFF, &val);
+	}
+	pci_read_config_dword(dev, pos + OCXL_DVSEC_AFU_INFO_DATA, data);
+	return 0;
+}
+
+/**
+ * read_template_version() - Read the template version from the AFU
+ * @dev: the device for the AFU
+ * @fn: the AFU offsets
+ * @len: outputs the template length
+ * @version: outputs the major<<8,minor version
+ *
+ * Returns 0 on success, negative on failure
+ */
+static int read_template_version(struct pci_dev *dev, struct ocxl_fn_config *fn,
+				 u16 *len, u16 *version)
+{
+	u32 val32;
+	u8 major, minor;
+	int rc;
+
+	rc = read_afu_info(dev, fn, OCXL_DVSEC_TEMPL_VERSION, &val32);
+	if (rc)
+		return rc;
+
+	*len = EXTRACT_BITS(val32, 16, 31);
+	major = EXTRACT_BITS(val32, 8, 15);
+	minor = EXTRACT_BITS(val32, 0, 7);
+	*version = (major << 8) + minor;
+	return 0;
+}
+
+int ocxl_config_check_afu_index(struct pci_dev *dev,
+				struct ocxl_fn_config *fn, int afu_idx)
+{
+	int rc;
+	u16 templ_version;
+	u16 len, expected_len;
+
+	pci_write_config_byte(dev,
+			fn->dvsec_afu_info_pos + OCXL_DVSEC_AFU_INFO_AFU_IDX,
+			afu_idx);
+
+	rc = read_template_version(dev, fn, &len, &templ_version);
+	if (rc)
+		return rc;
+
+	/* AFU index map can have holes, in which case we read all 0's */
+	if (!templ_version && !len)
+		return 0;
+
+	dev_dbg(&dev->dev, "AFU descriptor template version %d.%d\n",
+		templ_version >> 8, templ_version & 0xFF);
+
+	switch (templ_version) {
+	case 0x0005: // v0.5 was used prior to the spec approval
+	case 0x0100:
+		expected_len = OCXL_TEMPL_LEN_1_0;
+		break;
+	case 0x0101:
+		expected_len = OCXL_TEMPL_LEN_1_1;
+		break;
+	default:
+		dev_warn(&dev->dev, "Unknown AFU template version %#x\n",
+			templ_version);
+		expected_len = len;
+	}
+	if (len != expected_len)
+		dev_warn(&dev->dev,
+			"Unexpected template length %#x in AFU information, expected %#x for version %#x\n",
+			len, expected_len, templ_version);
+	return 1;
+}
+
+static int read_afu_name(struct pci_dev *dev, struct ocxl_fn_config *fn,
+			struct ocxl_afu_config *afu)
+{
+	int i, rc;
+	u32 val, *ptr;
+
+	BUILD_BUG_ON(OCXL_AFU_NAME_SZ < OCXL_TEMPL_NAME_LEN);
+	for (i = 0; i < OCXL_TEMPL_NAME_LEN; i += 4) {
+		rc = read_afu_info(dev, fn, OCXL_DVSEC_TEMPL_NAME + i, &val);
+		if (rc)
+			return rc;
+		ptr = (u32 *) &afu->name[i];
+		*ptr = le32_to_cpu((__force __le32) val);
+	}
+	afu->name[OCXL_AFU_NAME_SZ - 1] = '\0'; /* play safe */
+	return 0;
+}
+
+static int read_afu_mmio(struct pci_dev *dev, struct ocxl_fn_config *fn,
+			struct ocxl_afu_config *afu)
+{
+	int rc;
+	u32 val;
+
+	/*
+	 * Global MMIO
+	 */
+	rc = read_afu_info(dev, fn, OCXL_DVSEC_TEMPL_MMIO_GLOBAL, &val);
+	if (rc)
+		return rc;
+	afu->global_mmio_bar = EXTRACT_BITS(val, 0, 2);
+	afu->global_mmio_offset = EXTRACT_BITS(val, 16, 31) << 16;
+
+	rc = read_afu_info(dev, fn, OCXL_DVSEC_TEMPL_MMIO_GLOBAL + 4, &val);
+	if (rc)
+		return rc;
+	afu->global_mmio_offset += (u64) val << 32;
+
+	rc = read_afu_info(dev, fn, OCXL_DVSEC_TEMPL_MMIO_GLOBAL_SZ, &val);
+	if (rc)
+		return rc;
+	afu->global_mmio_size = val;
+
+	/*
+	 * Per-process MMIO
+	 */
+	rc = read_afu_info(dev, fn, OCXL_DVSEC_TEMPL_MMIO_PP, &val);
+	if (rc)
+		return rc;
+	afu->pp_mmio_bar = EXTRACT_BITS(val, 0, 2);
+	afu->pp_mmio_offset = EXTRACT_BITS(val, 16, 31) << 16;
+
+	rc = read_afu_info(dev, fn, OCXL_DVSEC_TEMPL_MMIO_PP + 4, &val);
+	if (rc)
+		return rc;
+	afu->pp_mmio_offset += (u64) val << 32;
+
+	rc = read_afu_info(dev, fn, OCXL_DVSEC_TEMPL_MMIO_PP_SZ, &val);
+	if (rc)
+		return rc;
+	afu->pp_mmio_stride = val;
+
+	return 0;
+}
+
+static int read_afu_control(struct pci_dev *dev, struct ocxl_afu_config *afu)
+{
+	int pos;
+	u8 val8;
+	u16 val16;
+
+	pos = find_dvsec_afu_ctrl(dev, afu->idx);
+	if (!pos) {
+		dev_err(&dev->dev, "Can't find AFU control DVSEC for AFU %d\n",
+			afu->idx);
+		return -ENODEV;
+	}
+	afu->dvsec_afu_control_pos = pos;
+
+	pci_read_config_byte(dev, pos + OCXL_DVSEC_AFU_CTRL_PASID_SUP, &val8);
+	afu->pasid_supported_log = EXTRACT_BITS(val8, 0, 4);
+
+	pci_read_config_word(dev, pos + OCXL_DVSEC_AFU_CTRL_ACTAG_SUP, &val16);
+	afu->actag_supported = EXTRACT_BITS(val16, 0, 11);
+	return 0;
+}
+
+static bool char_allowed(int c)
+{
+	/*
+	 * Permitted Characters : Alphanumeric, hyphen, underscore, comma
+	 */
+	if ((c >= 0x30 && c <= 0x39) /* digits */ ||
+		(c >= 0x41 && c <= 0x5A) /* upper case */ ||
+		(c >= 0x61 && c <= 0x7A) /* lower case */ ||
+		c == 0 /* NULL */ ||
+		c == 0x2D /* - */ ||
+		c == 0x5F /* _ */ ||
+		c == 0x2C /* , */)
+		return true;
+	return false;
+}
+
+static int validate_afu(struct pci_dev *dev, struct ocxl_afu_config *afu)
+{
+	int i;
+
+	if (!afu->name[0]) {
+		dev_err(&dev->dev, "Empty AFU name\n");
+		return -EINVAL;
+	}
+	for (i = 0; i < OCXL_TEMPL_NAME_LEN; i++) {
+		if (!char_allowed(afu->name[i])) {
+			dev_err(&dev->dev,
+				"Invalid character in AFU name\n");
+			return -EINVAL;
+		}
+	}
+
+	if (afu->global_mmio_bar != 0 &&
+		afu->global_mmio_bar != 2 &&
+		afu->global_mmio_bar != 4) {
+		dev_err(&dev->dev, "Invalid global MMIO bar number\n");
+		return -EINVAL;
+	}
+	if (afu->pp_mmio_bar != 0 &&
+		afu->pp_mmio_bar != 2 &&
+		afu->pp_mmio_bar != 4) {
+		dev_err(&dev->dev, "Invalid per-process MMIO bar number\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/**
+ * read_afu_lpc_memory_info() - Populate AFU metadata regarding LPC memory
+ * @dev: the device for the AFU
+ * @fn: the AFU offsets
+ * @afu: the AFU struct to populate the LPC metadata into
+ *
+ * Returns 0 on success, negative on failure
+ */
+static int read_afu_lpc_memory_info(struct pci_dev *dev,
+				    struct ocxl_fn_config *fn,
+				    struct ocxl_afu_config *afu)
+{
+	int rc;
+	u32 val32;
+	u16 templ_version;
+	u16 templ_len;
+	u64 total_mem_size = 0;
+	u64 lpc_mem_size = 0;
+
+	afu->lpc_mem_offset = 0;
+	afu->lpc_mem_size = 0;
+	afu->special_purpose_mem_offset = 0;
+	afu->special_purpose_mem_size = 0;
+	/*
+	 * For AFUs following template v1.0, the LPC memory covers the
+	 * total memory. Its size is a power of 2.
+	 *
+	 * For AFUs with template >= v1.01, the total memory size is
+	 * still a power of 2, but it is split in 2 parts:
+	 * - the LPC memory, whose size can now be anything
+	 * - the remainder memory is a special purpose memory, whose
+	 *   definition is AFU-dependent. It is not accessible through
+	 *   the usual commands for LPC memory
+	 */
+	rc = read_afu_info(dev, fn, OCXL_DVSEC_TEMPL_ALL_MEM_SZ, &val32);
+	if (rc)
+		return rc;
+
+	val32 = EXTRACT_BITS(val32, 0, 7);
+	if (!val32)
+		return 0; /* No LPC memory */
+
+	/*
+	 * The configuration space spec allows for a memory size of up
+	 * to 2^255 bytes.
+	 *
+	 * Current generation hardware uses 56-bit physical addresses,
+	 * but we won't be able to get near close to that, as we won't
+	 * have a hole big enough in the memory map.  Let it pass in
+	 * the driver for now. We'll get an error from the firmware
+	 * when trying to configure something too big.
+	 */
+	total_mem_size = 1ull << val32;
+
+	rc = read_afu_info(dev, fn, OCXL_DVSEC_TEMPL_LPC_MEM_START, &val32);
+	if (rc)
+		return rc;
+
+	afu->lpc_mem_offset = val32;
+
+	rc = read_afu_info(dev, fn, OCXL_DVSEC_TEMPL_LPC_MEM_START + 4, &val32);
+	if (rc)
+		return rc;
+
+	afu->lpc_mem_offset |= (u64) val32 << 32;
+
+	rc = read_template_version(dev, fn, &templ_len, &templ_version);
+	if (rc)
+		return rc;
+
+	if (templ_version >= 0x0101) {
+		rc = read_afu_info(dev, fn,
+				OCXL_DVSEC_TEMPL_LPC_MEM_SZ, &val32);
+		if (rc)
+			return rc;
+		lpc_mem_size = val32;
+
+		rc = read_afu_info(dev, fn,
+				OCXL_DVSEC_TEMPL_LPC_MEM_SZ + 4, &val32);
+		if (rc)
+			return rc;
+		lpc_mem_size |= (u64) val32 << 32;
+	} else {
+		lpc_mem_size = total_mem_size;
+	}
+	afu->lpc_mem_size = lpc_mem_size;
+
+	if (lpc_mem_size < total_mem_size) {
+		afu->special_purpose_mem_offset =
+			afu->lpc_mem_offset + lpc_mem_size;
+		afu->special_purpose_mem_size =
+			total_mem_size - lpc_mem_size;
+	}
+	return 0;
+}
+
+int ocxl_config_read_afu(struct pci_dev *dev, struct ocxl_fn_config *fn,
+			struct ocxl_afu_config *afu, u8 afu_idx)
+{
+	int rc;
+	u32 val32;
+
+	/*
+	 * First, we need to write the AFU idx for the AFU we want to
+	 * access.
+	 */
+	WARN_ON((afu_idx & OCXL_DVSEC_AFU_IDX_MASK) != afu_idx);
+	afu->idx = afu_idx;
+	pci_write_config_byte(dev,
+			fn->dvsec_afu_info_pos + OCXL_DVSEC_AFU_INFO_AFU_IDX,
+			afu->idx);
+
+	rc = read_afu_name(dev, fn, afu);
+	if (rc)
+		return rc;
+
+	rc = read_afu_info(dev, fn, OCXL_DVSEC_TEMPL_AFU_VERSION, &val32);
+	if (rc)
+		return rc;
+	afu->version_major = EXTRACT_BITS(val32, 24, 31);
+	afu->version_minor = EXTRACT_BITS(val32, 16, 23);
+	afu->afuc_type = EXTRACT_BITS(val32, 14, 15);
+	afu->afum_type = EXTRACT_BITS(val32, 12, 13);
+	afu->profile = EXTRACT_BITS(val32, 0, 7);
+
+	rc = read_afu_mmio(dev, fn, afu);
+	if (rc)
+		return rc;
+
+	rc = read_afu_lpc_memory_info(dev, fn, afu);
+	if (rc)
+		return rc;
+
+	rc = read_afu_control(dev, afu);
+	if (rc)
+		return rc;
+
+	dev_dbg(&dev->dev, "AFU configuration:\n");
+	dev_dbg(&dev->dev, "  name = %s\n", afu->name);
+	dev_dbg(&dev->dev, "  version = %d.%d\n", afu->version_major,
+		afu->version_minor);
+	dev_dbg(&dev->dev, "  global mmio bar = %hhu\n", afu->global_mmio_bar);
+	dev_dbg(&dev->dev, "  global mmio offset = %#llx\n",
+		afu->global_mmio_offset);
+	dev_dbg(&dev->dev, "  global mmio size = %#x\n", afu->global_mmio_size);
+	dev_dbg(&dev->dev, "  pp mmio bar = %hhu\n", afu->pp_mmio_bar);
+	dev_dbg(&dev->dev, "  pp mmio offset = %#llx\n", afu->pp_mmio_offset);
+	dev_dbg(&dev->dev, "  pp mmio stride = %#x\n", afu->pp_mmio_stride);
+	dev_dbg(&dev->dev, "  lpc_mem offset = %#llx\n", afu->lpc_mem_offset);
+	dev_dbg(&dev->dev, "  lpc_mem size = %#llx\n", afu->lpc_mem_size);
+	dev_dbg(&dev->dev, "  special purpose mem offset = %#llx\n",
+		afu->special_purpose_mem_offset);
+	dev_dbg(&dev->dev, "  special purpose mem size = %#llx\n",
+		afu->special_purpose_mem_size);
+	dev_dbg(&dev->dev, "  pasid supported (log) = %u\n",
+		afu->pasid_supported_log);
+	dev_dbg(&dev->dev, "  actag supported = %u\n",
+		afu->actag_supported);
+
+	rc = validate_afu(dev, afu);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ocxl_config_read_afu);
+
+int ocxl_config_get_actag_info(struct pci_dev *dev, u16 *base, u16 *enabled,
+			u16 *supported)
+{
+	int rc;
+
+	/*
+	 * This is really a simple wrapper for the kernel API, to
+	 * avoid an external driver using ocxl as a library to call
+	 * platform-dependent code
+	 */
+	rc = pnv_ocxl_get_actag(dev, base, enabled, supported);
+	if (rc) {
+		dev_err(&dev->dev, "Can't get actag for device: %d\n", rc);
+		return rc;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ocxl_config_get_actag_info);
+
+void ocxl_config_set_afu_actag(struct pci_dev *dev, int pos, int actag_base,
+			int actag_count)
+{
+	u16 val;
+
+	val = actag_count & OCXL_DVSEC_ACTAG_MASK;
+	pci_write_config_byte(dev, pos + OCXL_DVSEC_AFU_CTRL_ACTAG_EN, val);
+
+	val = actag_base & OCXL_DVSEC_ACTAG_MASK;
+	pci_write_config_dword(dev, pos + OCXL_DVSEC_AFU_CTRL_ACTAG_BASE, val);
+}
+EXPORT_SYMBOL_GPL(ocxl_config_set_afu_actag);
+
+int ocxl_config_get_pasid_info(struct pci_dev *dev, int *count)
+{
+	return pnv_ocxl_get_pasid_count(dev, count);
+}
+
+void ocxl_config_set_afu_pasid(struct pci_dev *dev, int pos, int pasid_base,
+			u32 pasid_count_log)
+{
+	u8 val8;
+	u32 val32;
+
+	val8 = pasid_count_log & OCXL_DVSEC_PASID_LOG_MASK;
+	pci_write_config_byte(dev, pos + OCXL_DVSEC_AFU_CTRL_PASID_EN, val8);
+
+	pci_read_config_dword(dev, pos + OCXL_DVSEC_AFU_CTRL_PASID_BASE,
+			&val32);
+	val32 &= ~OCXL_DVSEC_PASID_MASK;
+	val32 |= pasid_base & OCXL_DVSEC_PASID_MASK;
+	pci_write_config_dword(dev, pos + OCXL_DVSEC_AFU_CTRL_PASID_BASE,
+			val32);
+}
+EXPORT_SYMBOL_GPL(ocxl_config_set_afu_pasid);
+
+void ocxl_config_set_afu_state(struct pci_dev *dev, int pos, int enable)
+{
+	u8 val;
+
+	pci_read_config_byte(dev, pos + OCXL_DVSEC_AFU_CTRL_ENABLE, &val);
+	if (enable)
+		val |= 1;
+	else
+		val &= 0xFE;
+	pci_write_config_byte(dev, pos + OCXL_DVSEC_AFU_CTRL_ENABLE, val);
+}
+EXPORT_SYMBOL_GPL(ocxl_config_set_afu_state);
+
+int ocxl_config_set_TL(struct pci_dev *dev, int tl_dvsec)
+{
+	u32 val;
+	__be32 *be32ptr;
+	u8 timers;
+	int i, rc;
+	long recv_cap;
+	char *recv_rate;
+
+	/*
+	 * Skip on function != 0, as the TL can only be defined on 0
+	 */
+	if (PCI_FUNC(dev->devfn) != 0)
+		return 0;
+
+	recv_rate = kzalloc(PNV_OCXL_TL_RATE_BUF_SIZE, GFP_KERNEL);
+	if (!recv_rate)
+		return -ENOMEM;
+	/*
+	 * The spec defines 64 templates for messages in the
+	 * Transaction Layer (TL).
+	 *
+	 * The host and device each support a subset, so we need to
+	 * configure the transmitters on each side to send only
+	 * templates the receiver understands, at a rate the receiver
+	 * can process.  Per the spec, template 0 must be supported by
+	 * everybody. That's the template which has been used by the
+	 * host and device so far.
+	 *
+	 * The sending rate limit must be set before the template is
+	 * enabled.
+	 */
+
+	/*
+	 * Device -> host
+	 */
+	rc = pnv_ocxl_get_tl_cap(dev, &recv_cap, recv_rate,
+				PNV_OCXL_TL_RATE_BUF_SIZE);
+	if (rc)
+		goto out;
+
+	for (i = 0; i < PNV_OCXL_TL_RATE_BUF_SIZE; i += 4) {
+		be32ptr = (__be32 *) &recv_rate[i];
+		pci_write_config_dword(dev,
+				tl_dvsec + OCXL_DVSEC_TL_SEND_RATE + i,
+				be32_to_cpu(*be32ptr));
+	}
+	val = recv_cap >> 32;
+	pci_write_config_dword(dev, tl_dvsec + OCXL_DVSEC_TL_SEND_CAP, val);
+	val = recv_cap & GENMASK(31, 0);
+	pci_write_config_dword(dev, tl_dvsec + OCXL_DVSEC_TL_SEND_CAP + 4, val);
+
+	/*
+	 * Host -> device
+	 */
+	for (i = 0; i < PNV_OCXL_TL_RATE_BUF_SIZE; i += 4) {
+		pci_read_config_dword(dev,
+				tl_dvsec + OCXL_DVSEC_TL_RECV_RATE + i,
+				&val);
+		be32ptr = (__be32 *) &recv_rate[i];
+		*be32ptr = cpu_to_be32(val);
+	}
+	pci_read_config_dword(dev, tl_dvsec + OCXL_DVSEC_TL_RECV_CAP, &val);
+	recv_cap = (long) val << 32;
+	pci_read_config_dword(dev, tl_dvsec + OCXL_DVSEC_TL_RECV_CAP + 4, &val);
+	recv_cap |= val;
+
+	rc = pnv_ocxl_set_tl_conf(dev, recv_cap, __pa(recv_rate),
+				PNV_OCXL_TL_RATE_BUF_SIZE);
+	if (rc)
+		goto out;
+
+	/*
+	 * Opencapi commands needing to be retried are classified per
+	 * the TL in 2 groups: short and long commands.
+	 *
+	 * The short back off timer it not used for now. It will be
+	 * for opencapi 4.0.
+	 *
+	 * The long back off timer is typically used when an AFU hits
+	 * a page fault but the NPU is already processing one. So the
+	 * AFU needs to wait before it can resubmit. Having a value
+	 * too low doesn't break anything, but can generate extra
+	 * traffic on the link.
+	 * We set it to 1.6 us for now. It's shorter than, but in the
+	 * same order of magnitude as the time spent to process a page
+	 * fault.
+	 */
+	timers = 0x2 << 4; /* long timer = 1.6 us */
+	pci_write_config_byte(dev, tl_dvsec + OCXL_DVSEC_TL_BACKOFF_TIMERS,
+			timers);
+
+	rc = 0;
+out:
+	kfree(recv_rate);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ocxl_config_set_TL);
+
+int ocxl_config_terminate_pasid(struct pci_dev *dev, int afu_control, int pasid)
+{
+	u32 val;
+	unsigned long timeout;
+
+	pci_read_config_dword(dev, afu_control + OCXL_DVSEC_AFU_CTRL_TERM_PASID,
+			&val);
+	if (EXTRACT_BIT(val, 20)) {
+		dev_err(&dev->dev,
+			"Can't terminate PASID %#x, previous termination didn't complete\n",
+			pasid);
+		return -EBUSY;
+	}
+
+	val &= ~OCXL_DVSEC_PASID_MASK;
+	val |= pasid & OCXL_DVSEC_PASID_MASK;
+	val |= BIT(20);
+	pci_write_config_dword(dev,
+			afu_control + OCXL_DVSEC_AFU_CTRL_TERM_PASID,
+			val);
+
+	timeout = jiffies + (HZ * OCXL_CFG_TIMEOUT);
+	pci_read_config_dword(dev, afu_control + OCXL_DVSEC_AFU_CTRL_TERM_PASID,
+			&val);
+	while (EXTRACT_BIT(val, 20)) {
+		if (time_after_eq(jiffies, timeout)) {
+			dev_err(&dev->dev,
+				"Timeout while waiting for AFU to terminate PASID %#x\n",
+				pasid);
+			return -EBUSY;
+		}
+		cpu_relax();
+		pci_read_config_dword(dev,
+				afu_control + OCXL_DVSEC_AFU_CTRL_TERM_PASID,
+				&val);
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ocxl_config_terminate_pasid);
+
+void ocxl_config_set_actag(struct pci_dev *dev, int func_dvsec, u32 tag_first,
+			u32 tag_count)
+{
+	u32 val;
+
+	val = (tag_first & OCXL_DVSEC_ACTAG_MASK) << 16;
+	val |= tag_count & OCXL_DVSEC_ACTAG_MASK;
+	pci_write_config_dword(dev, func_dvsec + OCXL_DVSEC_FUNC_OFF_ACTAG,
+			val);
+}
+EXPORT_SYMBOL_GPL(ocxl_config_set_actag);