aboutsummaryrefslogtreecommitdiff
path: root/drivers/mmc/host/sdhci-brcmstb.c
diff options
context:
space:
mode:
authorLibravatar Linus Torvalds <torvalds@linux-foundation.org>2023-02-21 18:24:12 -0800
committerLibravatar Linus Torvalds <torvalds@linux-foundation.org>2023-02-21 18:24:12 -0800
commit5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 (patch)
treecc5c2d0a898769fd59549594fedb3ee6f84e59a0 /drivers/mmc/host/sdhci-brcmstb.c
downloadlinux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.tar.gz
linux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.zip
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted
Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ...
Diffstat (limited to 'drivers/mmc/host/sdhci-brcmstb.c')
-rw-r--r--drivers/mmc/host/sdhci-brcmstb.c445
1 files changed, 445 insertions, 0 deletions
diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c
new file mode 100644
index 000000000..f2cf3d70d
--- /dev/null
+++ b/drivers/mmc/host/sdhci-brcmstb.c
@@ -0,0 +1,445 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sdhci-brcmstb.c Support for SDHCI on Broadcom BRCMSTB SoC's
+ *
+ * Copyright (C) 2015 Broadcom Corporation
+ */
+
+#include <linux/io.h>
+#include <linux/mmc/host.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+
+#include "sdhci-cqhci.h"
+#include "sdhci-pltfm.h"
+#include "cqhci.h"
+
+#define SDHCI_VENDOR 0x78
+#define SDHCI_VENDOR_ENHANCED_STRB 0x1
+#define SDHCI_VENDOR_GATE_SDCLK_EN 0x2
+
+#define BRCMSTB_MATCH_FLAGS_NO_64BIT BIT(0)
+#define BRCMSTB_MATCH_FLAGS_BROKEN_TIMEOUT BIT(1)
+#define BRCMSTB_MATCH_FLAGS_HAS_CLOCK_GATE BIT(2)
+
+#define BRCMSTB_PRIV_FLAGS_HAS_CQE BIT(0)
+#define BRCMSTB_PRIV_FLAGS_GATE_CLOCK BIT(1)
+
+#define SDHCI_ARASAN_CQE_BASE_ADDR 0x200
+
+struct sdhci_brcmstb_priv {
+ void __iomem *cfg_regs;
+ unsigned int flags;
+ struct clk *base_clk;
+ u32 base_freq_hz;
+};
+
+struct brcmstb_match_priv {
+ void (*hs400es)(struct mmc_host *mmc, struct mmc_ios *ios);
+ struct sdhci_ops *ops;
+ const unsigned int flags;
+};
+
+static inline void enable_clock_gating(struct sdhci_host *host)
+{
+ u32 reg;
+
+ reg = sdhci_readl(host, SDHCI_VENDOR);
+ reg |= SDHCI_VENDOR_GATE_SDCLK_EN;
+ sdhci_writel(host, reg, SDHCI_VENDOR);
+}
+
+static void brcmstb_reset(struct sdhci_host *host, u8 mask)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_brcmstb_priv *priv = sdhci_pltfm_priv(pltfm_host);
+
+ sdhci_and_cqhci_reset(host, mask);
+
+ /* Reset will clear this, so re-enable it */
+ if (priv->flags & BRCMSTB_PRIV_FLAGS_GATE_CLOCK)
+ enable_clock_gating(host);
+}
+
+static void sdhci_brcmstb_hs400es(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+
+ u32 reg;
+
+ dev_dbg(mmc_dev(mmc), "%s(): Setting HS400-Enhanced-Strobe mode\n",
+ __func__);
+ reg = readl(host->ioaddr + SDHCI_VENDOR);
+ if (ios->enhanced_strobe)
+ reg |= SDHCI_VENDOR_ENHANCED_STRB;
+ else
+ reg &= ~SDHCI_VENDOR_ENHANCED_STRB;
+ writel(reg, host->ioaddr + SDHCI_VENDOR);
+}
+
+static void sdhci_brcmstb_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+ u16 clk;
+
+ host->mmc->actual_clock = 0;
+
+ clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+ if (clock == 0)
+ return;
+
+ sdhci_enable_clk(host, clk);
+}
+
+static void sdhci_brcmstb_set_uhs_signaling(struct sdhci_host *host,
+ unsigned int timing)
+{
+ u16 ctrl_2;
+
+ dev_dbg(mmc_dev(host->mmc), "%s: Setting UHS signaling for %d timing\n",
+ __func__, timing);
+ ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ /* Select Bus Speed Mode for host */
+ ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
+ if ((timing == MMC_TIMING_MMC_HS200) ||
+ (timing == MMC_TIMING_UHS_SDR104))
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
+ else if (timing == MMC_TIMING_UHS_SDR12)
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
+ else if (timing == MMC_TIMING_SD_HS ||
+ timing == MMC_TIMING_MMC_HS ||
+ timing == MMC_TIMING_UHS_SDR25)
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
+ else if (timing == MMC_TIMING_UHS_SDR50)
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
+ else if ((timing == MMC_TIMING_UHS_DDR50) ||
+ (timing == MMC_TIMING_MMC_DDR52))
+ ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
+ else if (timing == MMC_TIMING_MMC_HS400)
+ ctrl_2 |= SDHCI_CTRL_HS400; /* Non-standard */
+ sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+}
+
+static void sdhci_brcmstb_dumpregs(struct mmc_host *mmc)
+{
+ sdhci_dumpregs(mmc_priv(mmc));
+}
+
+static void sdhci_brcmstb_cqe_enable(struct mmc_host *mmc)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ u32 reg;
+
+ reg = sdhci_readl(host, SDHCI_PRESENT_STATE);
+ while (reg & SDHCI_DATA_AVAILABLE) {
+ sdhci_readl(host, SDHCI_BUFFER);
+ reg = sdhci_readl(host, SDHCI_PRESENT_STATE);
+ }
+
+ sdhci_cqe_enable(mmc);
+}
+
+static const struct cqhci_host_ops sdhci_brcmstb_cqhci_ops = {
+ .enable = sdhci_brcmstb_cqe_enable,
+ .disable = sdhci_cqe_disable,
+ .dumpregs = sdhci_brcmstb_dumpregs,
+};
+
+static struct sdhci_ops sdhci_brcmstb_ops = {
+ .set_clock = sdhci_set_clock,
+ .set_bus_width = sdhci_set_bus_width,
+ .reset = sdhci_reset,
+ .set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+static struct sdhci_ops sdhci_brcmstb_ops_7216 = {
+ .set_clock = sdhci_brcmstb_set_clock,
+ .set_bus_width = sdhci_set_bus_width,
+ .reset = brcmstb_reset,
+ .set_uhs_signaling = sdhci_brcmstb_set_uhs_signaling,
+};
+
+static struct brcmstb_match_priv match_priv_7425 = {
+ .flags = BRCMSTB_MATCH_FLAGS_NO_64BIT |
+ BRCMSTB_MATCH_FLAGS_BROKEN_TIMEOUT,
+ .ops = &sdhci_brcmstb_ops,
+};
+
+static struct brcmstb_match_priv match_priv_7445 = {
+ .flags = BRCMSTB_MATCH_FLAGS_BROKEN_TIMEOUT,
+ .ops = &sdhci_brcmstb_ops,
+};
+
+static const struct brcmstb_match_priv match_priv_7216 = {
+ .flags = BRCMSTB_MATCH_FLAGS_HAS_CLOCK_GATE,
+ .hs400es = sdhci_brcmstb_hs400es,
+ .ops = &sdhci_brcmstb_ops_7216,
+};
+
+static const struct of_device_id __maybe_unused sdhci_brcm_of_match[] = {
+ { .compatible = "brcm,bcm7425-sdhci", .data = &match_priv_7425 },
+ { .compatible = "brcm,bcm7445-sdhci", .data = &match_priv_7445 },
+ { .compatible = "brcm,bcm7216-sdhci", .data = &match_priv_7216 },
+ {},
+};
+
+static u32 sdhci_brcmstb_cqhci_irq(struct sdhci_host *host, u32 intmask)
+{
+ int cmd_error = 0;
+ int data_error = 0;
+
+ if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error))
+ return intmask;
+
+ cqhci_irq(host->mmc, intmask, cmd_error, data_error);
+
+ return 0;
+}
+
+static int sdhci_brcmstb_add_host(struct sdhci_host *host,
+ struct sdhci_brcmstb_priv *priv)
+{
+ struct cqhci_host *cq_host;
+ bool dma64;
+ int ret;
+
+ if ((priv->flags & BRCMSTB_PRIV_FLAGS_HAS_CQE) == 0)
+ return sdhci_add_host(host);
+
+ dev_dbg(mmc_dev(host->mmc), "CQE is enabled\n");
+ host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
+ ret = sdhci_setup_host(host);
+ if (ret)
+ return ret;
+
+ cq_host = devm_kzalloc(mmc_dev(host->mmc),
+ sizeof(*cq_host), GFP_KERNEL);
+ if (!cq_host) {
+ ret = -ENOMEM;
+ goto cleanup;
+ }
+
+ cq_host->mmio = host->ioaddr + SDHCI_ARASAN_CQE_BASE_ADDR;
+ cq_host->ops = &sdhci_brcmstb_cqhci_ops;
+
+ dma64 = host->flags & SDHCI_USE_64_BIT_DMA;
+ if (dma64) {
+ dev_dbg(mmc_dev(host->mmc), "Using 64 bit DMA\n");
+ cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
+ }
+
+ ret = cqhci_init(cq_host, host->mmc, dma64);
+ if (ret)
+ goto cleanup;
+
+ ret = __sdhci_add_host(host);
+ if (ret)
+ goto cleanup;
+
+ return 0;
+
+cleanup:
+ sdhci_cleanup_host(host);
+ return ret;
+}
+
+static int sdhci_brcmstb_probe(struct platform_device *pdev)
+{
+ const struct brcmstb_match_priv *match_priv;
+ struct sdhci_pltfm_data brcmstb_pdata;
+ struct sdhci_pltfm_host *pltfm_host;
+ const struct of_device_id *match;
+ struct sdhci_brcmstb_priv *priv;
+ u32 actual_clock_mhz;
+ struct sdhci_host *host;
+ struct resource *iomem;
+ struct clk *clk;
+ struct clk *base_clk = NULL;
+ int res;
+
+ match = of_match_node(sdhci_brcm_of_match, pdev->dev.of_node);
+ match_priv = match->data;
+
+ dev_dbg(&pdev->dev, "Probe found match for %s\n", match->compatible);
+
+ clk = devm_clk_get_optional(&pdev->dev, NULL);
+ if (IS_ERR(clk))
+ return dev_err_probe(&pdev->dev, PTR_ERR(clk),
+ "Failed to get clock from Device Tree\n");
+
+ res = clk_prepare_enable(clk);
+ if (res)
+ return res;
+
+ memset(&brcmstb_pdata, 0, sizeof(brcmstb_pdata));
+ brcmstb_pdata.ops = match_priv->ops;
+ host = sdhci_pltfm_init(pdev, &brcmstb_pdata,
+ sizeof(struct sdhci_brcmstb_priv));
+ if (IS_ERR(host)) {
+ res = PTR_ERR(host);
+ goto err_clk;
+ }
+
+ pltfm_host = sdhci_priv(host);
+ priv = sdhci_pltfm_priv(pltfm_host);
+ if (device_property_read_bool(&pdev->dev, "supports-cqe")) {
+ priv->flags |= BRCMSTB_PRIV_FLAGS_HAS_CQE;
+ match_priv->ops->irq = sdhci_brcmstb_cqhci_irq;
+ }
+
+ /* Map in the non-standard CFG registers */
+ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ priv->cfg_regs = devm_ioremap_resource(&pdev->dev, iomem);
+ if (IS_ERR(priv->cfg_regs)) {
+ res = PTR_ERR(priv->cfg_regs);
+ goto err;
+ }
+
+ sdhci_get_of_property(pdev);
+ res = mmc_of_parse(host->mmc);
+ if (res)
+ goto err;
+
+ /*
+ * Automatic clock gating does not work for SD cards that may
+ * voltage switch so only enable it for non-removable devices.
+ */
+ if ((match_priv->flags & BRCMSTB_MATCH_FLAGS_HAS_CLOCK_GATE) &&
+ (host->mmc->caps & MMC_CAP_NONREMOVABLE))
+ priv->flags |= BRCMSTB_PRIV_FLAGS_GATE_CLOCK;
+
+ /*
+ * If the chip has enhanced strobe and it's enabled, add
+ * callback
+ */
+ if (match_priv->hs400es &&
+ (host->mmc->caps2 & MMC_CAP2_HS400_ES))
+ host->mmc_host_ops.hs400_enhanced_strobe = match_priv->hs400es;
+
+ /*
+ * Supply the existing CAPS, but clear the UHS modes. This
+ * will allow these modes to be specified by device tree
+ * properties through mmc_of_parse().
+ */
+ host->caps = sdhci_readl(host, SDHCI_CAPABILITIES);
+ if (match_priv->flags & BRCMSTB_MATCH_FLAGS_NO_64BIT)
+ host->caps &= ~SDHCI_CAN_64BIT;
+ host->caps1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
+ host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_SDR104 |
+ SDHCI_SUPPORT_DDR50);
+ host->quirks |= SDHCI_QUIRK_MISSING_CAPS;
+
+ if (match_priv->flags & BRCMSTB_MATCH_FLAGS_BROKEN_TIMEOUT)
+ host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+
+ /* Change the base clock frequency if the DT property exists */
+ if (device_property_read_u32(&pdev->dev, "clock-frequency",
+ &priv->base_freq_hz) != 0)
+ goto add_host;
+
+ base_clk = devm_clk_get_optional(&pdev->dev, "sdio_freq");
+ if (IS_ERR(base_clk)) {
+ dev_warn(&pdev->dev, "Clock for \"sdio_freq\" not found\n");
+ goto add_host;
+ }
+
+ res = clk_prepare_enable(base_clk);
+ if (res)
+ goto err;
+
+ /* set improved clock rate */
+ clk_set_rate(base_clk, priv->base_freq_hz);
+ actual_clock_mhz = clk_get_rate(base_clk) / 1000000;
+
+ host->caps &= ~SDHCI_CLOCK_V3_BASE_MASK;
+ host->caps |= (actual_clock_mhz << SDHCI_CLOCK_BASE_SHIFT);
+ /* Disable presets because they are now incorrect */
+ host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
+
+ dev_dbg(&pdev->dev, "Base Clock Frequency changed to %dMHz\n",
+ actual_clock_mhz);
+ priv->base_clk = base_clk;
+
+add_host:
+ res = sdhci_brcmstb_add_host(host, priv);
+ if (res)
+ goto err;
+
+ pltfm_host->clk = clk;
+ return res;
+
+err:
+ sdhci_pltfm_free(pdev);
+err_clk:
+ clk_disable_unprepare(base_clk);
+ clk_disable_unprepare(clk);
+ return res;
+}
+
+static void sdhci_brcmstb_shutdown(struct platform_device *pdev)
+{
+ sdhci_pltfm_suspend(&pdev->dev);
+}
+
+MODULE_DEVICE_TABLE(of, sdhci_brcm_of_match);
+
+#ifdef CONFIG_PM_SLEEP
+static int sdhci_brcmstb_suspend(struct device *dev)
+{
+ struct sdhci_host *host = dev_get_drvdata(dev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_brcmstb_priv *priv = sdhci_pltfm_priv(pltfm_host);
+
+ clk_disable_unprepare(priv->base_clk);
+ return sdhci_pltfm_suspend(dev);
+}
+
+static int sdhci_brcmstb_resume(struct device *dev)
+{
+ struct sdhci_host *host = dev_get_drvdata(dev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_brcmstb_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ int ret;
+
+ ret = sdhci_pltfm_resume(dev);
+ if (!ret && priv->base_freq_hz) {
+ ret = clk_prepare_enable(priv->base_clk);
+ /*
+ * Note: using clk_get_rate() below as clk_get_rate()
+ * honors CLK_GET_RATE_NOCACHE attribute, but clk_set_rate()
+ * may do implicit get_rate() calls that do not honor
+ * CLK_GET_RATE_NOCACHE.
+ */
+ if (!ret &&
+ (clk_get_rate(priv->base_clk) != priv->base_freq_hz))
+ ret = clk_set_rate(priv->base_clk, priv->base_freq_hz);
+ }
+
+ return ret;
+}
+#endif
+
+static const struct dev_pm_ops sdhci_brcmstb_pmops = {
+ SET_SYSTEM_SLEEP_PM_OPS(sdhci_brcmstb_suspend, sdhci_brcmstb_resume)
+};
+
+static struct platform_driver sdhci_brcmstb_driver = {
+ .driver = {
+ .name = "sdhci-brcmstb",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ .pm = &sdhci_brcmstb_pmops,
+ .of_match_table = of_match_ptr(sdhci_brcm_of_match),
+ },
+ .probe = sdhci_brcmstb_probe,
+ .remove = sdhci_pltfm_unregister,
+ .shutdown = sdhci_brcmstb_shutdown,
+};
+
+module_platform_driver(sdhci_brcmstb_driver);
+
+MODULE_DESCRIPTION("SDHCI driver for Broadcom BRCMSTB SoCs");
+MODULE_AUTHOR("Broadcom");
+MODULE_LICENSE("GPL v2");