Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 637 insertions, 0 deletions

diff --git a/drivers/mmc/host/sdhci-of-aspeed.c b/drivers/mmc/host/sdhci-of-aspeed.c
new file mode 100644
index 000000000..ba6677bf7
--- /dev/null
+++ b/drivers/mmc/host/sdhci-of-aspeed.c
@@ -0,0 +1,637 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* Copyright (C) 2019 ASPEED Technology Inc. */
+/* Copyright (C) 2019 IBM Corp. */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/math64.h>
+#include <linux/mmc/host.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#include "sdhci-pltfm.h"
+
+#define ASPEED_SDC_INFO			0x00
+#define   ASPEED_SDC_S1_MMC8		BIT(25)
+#define   ASPEED_SDC_S0_MMC8		BIT(24)
+#define ASPEED_SDC_PHASE		0xf4
+#define   ASPEED_SDC_S1_PHASE_IN	GENMASK(25, 21)
+#define   ASPEED_SDC_S0_PHASE_IN	GENMASK(20, 16)
+#define   ASPEED_SDC_S1_PHASE_OUT	GENMASK(15, 11)
+#define   ASPEED_SDC_S1_PHASE_IN_EN	BIT(10)
+#define   ASPEED_SDC_S1_PHASE_OUT_EN	GENMASK(9, 8)
+#define   ASPEED_SDC_S0_PHASE_OUT	GENMASK(7, 3)
+#define   ASPEED_SDC_S0_PHASE_IN_EN	BIT(2)
+#define   ASPEED_SDC_S0_PHASE_OUT_EN	GENMASK(1, 0)
+#define   ASPEED_SDC_PHASE_MAX		31
+
+/* SDIO{10,20} */
+#define ASPEED_SDC_CAP1_1_8V           (0 * 32 + 26)
+/* SDIO{14,24} */
+#define ASPEED_SDC_CAP2_SDR104         (1 * 32 + 1)
+
+struct aspeed_sdc {
+	struct clk *clk;
+	struct resource *res;
+
+	spinlock_t lock;
+	void __iomem *regs;
+};
+
+struct aspeed_sdhci_tap_param {
+	bool valid;
+
+#define ASPEED_SDHCI_TAP_PARAM_INVERT_CLK	BIT(4)
+	u8 in;
+	u8 out;
+};
+
+struct aspeed_sdhci_tap_desc {
+	u32 tap_mask;
+	u32 enable_mask;
+	u8 enable_value;
+};
+
+struct aspeed_sdhci_phase_desc {
+	struct aspeed_sdhci_tap_desc in;
+	struct aspeed_sdhci_tap_desc out;
+};
+
+struct aspeed_sdhci_pdata {
+	unsigned int clk_div_start;
+	const struct aspeed_sdhci_phase_desc *phase_desc;
+	size_t nr_phase_descs;
+};
+
+struct aspeed_sdhci {
+	const struct aspeed_sdhci_pdata *pdata;
+	struct aspeed_sdc *parent;
+	u32 width_mask;
+	struct mmc_clk_phase_map phase_map;
+	const struct aspeed_sdhci_phase_desc *phase_desc;
+};
+
+/*
+ * The function sets the mirror register for updating
+ * capbilities of the current slot.
+ *
+ *   slot | capability  | caps_reg | mirror_reg
+ *   -----|-------------|----------|------------
+ *     0  | CAP1_1_8V   | SDIO140  |   SDIO10
+ *     0  | CAP2_SDR104 | SDIO144  |   SDIO14
+ *     1  | CAP1_1_8V   | SDIO240  |   SDIO20
+ *     1  | CAP2_SDR104 | SDIO244  |   SDIO24
+ */
+static void aspeed_sdc_set_slot_capability(struct sdhci_host *host, struct aspeed_sdc *sdc,
+					   int capability, bool enable, u8 slot)
+{
+	u32 mirror_reg_offset;
+	u32 cap_val;
+	u8 cap_reg;
+
+	if (slot > 1)
+		return;
+
+	cap_reg = capability / 32;
+	cap_val = sdhci_readl(host, 0x40 + (cap_reg * 4));
+	if (enable)
+		cap_val |= BIT(capability % 32);
+	else
+		cap_val &= ~BIT(capability % 32);
+	mirror_reg_offset = ((slot + 1) * 0x10) + (cap_reg * 4);
+	writel(cap_val, sdc->regs + mirror_reg_offset);
+}
+
+static void aspeed_sdc_configure_8bit_mode(struct aspeed_sdc *sdc,
+					   struct aspeed_sdhci *sdhci,
+					   bool bus8)
+{
+	u32 info;
+
+	/* Set/clear 8 bit mode */
+	spin_lock(&sdc->lock);
+	info = readl(sdc->regs + ASPEED_SDC_INFO);
+	if (bus8)
+		info |= sdhci->width_mask;
+	else
+		info &= ~sdhci->width_mask;
+	writel(info, sdc->regs + ASPEED_SDC_INFO);
+	spin_unlock(&sdc->lock);
+}
+
+static u32
+aspeed_sdc_set_phase_tap(const struct aspeed_sdhci_tap_desc *desc,
+			 u8 tap, bool enable, u32 reg)
+{
+	reg &= ~(desc->enable_mask | desc->tap_mask);
+	if (enable) {
+		reg |= tap << __ffs(desc->tap_mask);
+		reg |= desc->enable_value << __ffs(desc->enable_mask);
+	}
+
+	return reg;
+}
+
+static void
+aspeed_sdc_set_phase_taps(struct aspeed_sdc *sdc,
+			  const struct aspeed_sdhci_phase_desc *desc,
+			  const struct aspeed_sdhci_tap_param *taps)
+{
+	u32 reg;
+
+	spin_lock(&sdc->lock);
+	reg = readl(sdc->regs + ASPEED_SDC_PHASE);
+
+	reg = aspeed_sdc_set_phase_tap(&desc->in, taps->in, taps->valid, reg);
+	reg = aspeed_sdc_set_phase_tap(&desc->out, taps->out, taps->valid, reg);
+
+	writel(reg, sdc->regs + ASPEED_SDC_PHASE);
+	spin_unlock(&sdc->lock);
+}
+
+#define PICOSECONDS_PER_SECOND		1000000000000ULL
+#define ASPEED_SDHCI_NR_TAPS		15
+/* Measured value with *handwave* environmentals and static loading */
+#define ASPEED_SDHCI_MAX_TAP_DELAY_PS	1253
+static int aspeed_sdhci_phase_to_tap(struct device *dev, unsigned long rate_hz,
+				     int phase_deg)
+{
+	u64 phase_period_ps;
+	u64 prop_delay_ps;
+	u64 clk_period_ps;
+	unsigned int tap;
+	u8 inverted;
+
+	phase_deg %= 360;
+
+	if (phase_deg >= 180) {
+		inverted = ASPEED_SDHCI_TAP_PARAM_INVERT_CLK;
+		phase_deg -= 180;
+		dev_dbg(dev,
+			"Inverting clock to reduce phase correction from %d to %d degrees\n",
+			phase_deg + 180, phase_deg);
+	} else {
+		inverted = 0;
+	}
+
+	prop_delay_ps = ASPEED_SDHCI_MAX_TAP_DELAY_PS / ASPEED_SDHCI_NR_TAPS;
+	clk_period_ps = div_u64(PICOSECONDS_PER_SECOND, (u64)rate_hz);
+	phase_period_ps = div_u64((u64)phase_deg * clk_period_ps, 360ULL);
+
+	tap = div_u64(phase_period_ps, prop_delay_ps);
+	if (tap > ASPEED_SDHCI_NR_TAPS) {
+		dev_dbg(dev,
+			 "Requested out of range phase tap %d for %d degrees of phase compensation at %luHz, clamping to tap %d\n",
+			 tap, phase_deg, rate_hz, ASPEED_SDHCI_NR_TAPS);
+		tap = ASPEED_SDHCI_NR_TAPS;
+	}
+
+	return inverted | tap;
+}
+
+static void
+aspeed_sdhci_phases_to_taps(struct device *dev, unsigned long rate,
+			    const struct mmc_clk_phase *phases,
+			    struct aspeed_sdhci_tap_param *taps)
+{
+	taps->valid = phases->valid;
+
+	if (!phases->valid)
+		return;
+
+	taps->in = aspeed_sdhci_phase_to_tap(dev, rate, phases->in_deg);
+	taps->out = aspeed_sdhci_phase_to_tap(dev, rate, phases->out_deg);
+}
+
+static void
+aspeed_sdhci_configure_phase(struct sdhci_host *host, unsigned long rate)
+{
+	struct aspeed_sdhci_tap_param _taps = {0}, *taps = &_taps;
+	struct mmc_clk_phase *params;
+	struct aspeed_sdhci *sdhci;
+	struct device *dev;
+
+	dev = mmc_dev(host->mmc);
+	sdhci = sdhci_pltfm_priv(sdhci_priv(host));
+
+	if (!sdhci->phase_desc)
+		return;
+
+	params = &sdhci->phase_map.phase[host->timing];
+	aspeed_sdhci_phases_to_taps(dev, rate, params, taps);
+	aspeed_sdc_set_phase_taps(sdhci->parent, sdhci->phase_desc, taps);
+	dev_dbg(dev,
+		"Using taps [%d, %d] for [%d, %d] degrees of phase correction at %luHz (%d)\n",
+		taps->in & ASPEED_SDHCI_NR_TAPS,
+		taps->out & ASPEED_SDHCI_NR_TAPS,
+		params->in_deg, params->out_deg, rate, host->timing);
+}
+
+static void aspeed_sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+	struct sdhci_pltfm_host *pltfm_host;
+	unsigned long parent, bus;
+	struct aspeed_sdhci *sdhci;
+	int div;
+	u16 clk;
+
+	pltfm_host = sdhci_priv(host);
+	sdhci = sdhci_pltfm_priv(pltfm_host);
+
+	parent = clk_get_rate(pltfm_host->clk);
+
+	sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
+
+	if (clock == 0)
+		return;
+
+	if (WARN_ON(clock > host->max_clk))
+		clock = host->max_clk;
+
+	/*
+	 * Regarding the AST2600:
+	 *
+	 * If (EMMC12C[7:6], EMMC12C[15:8] == 0) then
+	 *   period of SDCLK = period of SDMCLK.
+	 *
+	 * If (EMMC12C[7:6], EMMC12C[15:8] != 0) then
+	 *   period of SDCLK = period of SDMCLK * 2 * (EMMC12C[7:6], EMMC[15:8])
+	 *
+	 * If you keep EMMC12C[7:6] = 0 and EMMC12C[15:8] as one-hot,
+	 * 0x1/0x2/0x4/etc, you will find it is compatible to AST2400 or AST2500
+	 *
+	 * Keep the one-hot behaviour for backwards compatibility except for
+	 * supporting the value 0 in (EMMC12C[7:6], EMMC12C[15:8]), and capture
+	 * the 0-value capability in clk_div_start.
+	 */
+	for (div = sdhci->pdata->clk_div_start; div < 256; div *= 2) {
+		bus = parent / div;
+		if (bus <= clock)
+			break;
+	}
+
+	div >>= 1;
+
+	clk = div << SDHCI_DIVIDER_SHIFT;
+
+	aspeed_sdhci_configure_phase(host, bus);
+
+	sdhci_enable_clk(host, clk);
+}
+
+static unsigned int aspeed_sdhci_get_max_clock(struct sdhci_host *host)
+{
+	if (host->mmc->f_max)
+		return host->mmc->f_max;
+
+	return sdhci_pltfm_clk_get_max_clock(host);
+}
+
+static void aspeed_sdhci_set_bus_width(struct sdhci_host *host, int width)
+{
+	struct sdhci_pltfm_host *pltfm_priv;
+	struct aspeed_sdhci *aspeed_sdhci;
+	struct aspeed_sdc *aspeed_sdc;
+	u8 ctrl;
+
+	pltfm_priv = sdhci_priv(host);
+	aspeed_sdhci = sdhci_pltfm_priv(pltfm_priv);
+	aspeed_sdc = aspeed_sdhci->parent;
+
+	/* Set/clear 8-bit mode */
+	aspeed_sdc_configure_8bit_mode(aspeed_sdc, aspeed_sdhci,
+				       width == MMC_BUS_WIDTH_8);
+
+	/* Set/clear 1 or 4 bit mode */
+	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+	if (width == MMC_BUS_WIDTH_4)
+		ctrl |= SDHCI_CTRL_4BITBUS;
+	else
+		ctrl &= ~SDHCI_CTRL_4BITBUS;
+	sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+}
+
+static u32 aspeed_sdhci_readl(struct sdhci_host *host, int reg)
+{
+	u32 val = readl(host->ioaddr + reg);
+
+	if (unlikely(reg == SDHCI_PRESENT_STATE) &&
+	    (host->mmc->caps2 & MMC_CAP2_CD_ACTIVE_HIGH))
+		val ^= SDHCI_CARD_PRESENT;
+
+	return val;
+}
+
+static const struct sdhci_ops aspeed_sdhci_ops = {
+	.read_l = aspeed_sdhci_readl,
+	.set_clock = aspeed_sdhci_set_clock,
+	.get_max_clock = aspeed_sdhci_get_max_clock,
+	.set_bus_width = aspeed_sdhci_set_bus_width,
+	.get_timeout_clock = sdhci_pltfm_clk_get_max_clock,
+	.reset = sdhci_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
+static const struct sdhci_pltfm_data aspeed_sdhci_pdata = {
+	.ops = &aspeed_sdhci_ops,
+	.quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
+};
+
+static inline int aspeed_sdhci_calculate_slot(struct aspeed_sdhci *dev,
+					      struct resource *res)
+{
+	resource_size_t delta;
+
+	if (!res || resource_type(res) != IORESOURCE_MEM)
+		return -EINVAL;
+
+	if (res->start < dev->parent->res->start)
+		return -EINVAL;
+
+	delta = res->start - dev->parent->res->start;
+	if (delta & (0x100 - 1))
+		return -EINVAL;
+
+	return (delta / 0x100) - 1;
+}
+
+static int aspeed_sdhci_probe(struct platform_device *pdev)
+{
+	const struct aspeed_sdhci_pdata *aspeed_pdata;
+	struct device_node *np = pdev->dev.of_node;
+	struct sdhci_pltfm_host *pltfm_host;
+	struct aspeed_sdhci *dev;
+	struct sdhci_host *host;
+	struct resource *res;
+	int slot;
+	int ret;
+
+	aspeed_pdata = of_device_get_match_data(&pdev->dev);
+	if (!aspeed_pdata) {
+		dev_err(&pdev->dev, "Missing platform configuration data\n");
+		return -EINVAL;
+	}
+
+	host = sdhci_pltfm_init(pdev, &aspeed_sdhci_pdata, sizeof(*dev));
+	if (IS_ERR(host))
+		return PTR_ERR(host);
+
+	pltfm_host = sdhci_priv(host);
+	dev = sdhci_pltfm_priv(pltfm_host);
+	dev->pdata = aspeed_pdata;
+	dev->parent = dev_get_drvdata(pdev->dev.parent);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	slot = aspeed_sdhci_calculate_slot(dev, res);
+
+	if (slot < 0)
+		return slot;
+	else if (slot >= 2)
+		return -EINVAL;
+
+	if (slot < dev->pdata->nr_phase_descs) {
+		dev->phase_desc = &dev->pdata->phase_desc[slot];
+	} else {
+		dev_info(&pdev->dev,
+			 "Phase control not supported for slot %d\n", slot);
+		dev->phase_desc = NULL;
+	}
+
+	dev->width_mask = !slot ? ASPEED_SDC_S0_MMC8 : ASPEED_SDC_S1_MMC8;
+
+	dev_info(&pdev->dev, "Configured for slot %d\n", slot);
+
+	sdhci_get_of_property(pdev);
+
+	if (of_property_read_bool(np, "mmc-hs200-1_8v") ||
+	    of_property_read_bool(np, "sd-uhs-sdr104")) {
+		aspeed_sdc_set_slot_capability(host, dev->parent, ASPEED_SDC_CAP1_1_8V,
+					       true, slot);
+	}
+
+	if (of_property_read_bool(np, "sd-uhs-sdr104")) {
+		aspeed_sdc_set_slot_capability(host, dev->parent, ASPEED_SDC_CAP2_SDR104,
+					       true, slot);
+	}
+
+	pltfm_host->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(pltfm_host->clk))
+		return PTR_ERR(pltfm_host->clk);
+
+	ret = clk_prepare_enable(pltfm_host->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to enable SDIO clock\n");
+		goto err_pltfm_free;
+	}
+
+	ret = mmc_of_parse(host->mmc);
+	if (ret)
+		goto err_sdhci_add;
+
+	if (dev->phase_desc)
+		mmc_of_parse_clk_phase(host->mmc, &dev->phase_map);
+
+	ret = sdhci_add_host(host);
+	if (ret)
+		goto err_sdhci_add;
+
+	return 0;
+
+err_sdhci_add:
+	clk_disable_unprepare(pltfm_host->clk);
+err_pltfm_free:
+	sdhci_pltfm_free(pdev);
+	return ret;
+}
+
+static int aspeed_sdhci_remove(struct platform_device *pdev)
+{
+	struct sdhci_pltfm_host *pltfm_host;
+	struct sdhci_host *host;
+	int dead = 0;
+
+	host = platform_get_drvdata(pdev);
+	pltfm_host = sdhci_priv(host);
+
+	sdhci_remove_host(host, dead);
+
+	clk_disable_unprepare(pltfm_host->clk);
+
+	sdhci_pltfm_free(pdev);
+
+	return 0;
+}
+
+static const struct aspeed_sdhci_pdata ast2400_sdhci_pdata = {
+	.clk_div_start = 2,
+};
+
+static const struct aspeed_sdhci_phase_desc ast2600_sdhci_phase[] = {
+	/* SDHCI/Slot 0 */
+	[0] = {
+		.in = {
+			.tap_mask = ASPEED_SDC_S0_PHASE_IN,
+			.enable_mask = ASPEED_SDC_S0_PHASE_IN_EN,
+			.enable_value = 1,
+		},
+		.out = {
+			.tap_mask = ASPEED_SDC_S0_PHASE_OUT,
+			.enable_mask = ASPEED_SDC_S0_PHASE_OUT_EN,
+			.enable_value = 3,
+		},
+	},
+	/* SDHCI/Slot 1 */
+	[1] = {
+		.in = {
+			.tap_mask = ASPEED_SDC_S1_PHASE_IN,
+			.enable_mask = ASPEED_SDC_S1_PHASE_IN_EN,
+			.enable_value = 1,
+		},
+		.out = {
+			.tap_mask = ASPEED_SDC_S1_PHASE_OUT,
+			.enable_mask = ASPEED_SDC_S1_PHASE_OUT_EN,
+			.enable_value = 3,
+		},
+	},
+};
+
+static const struct aspeed_sdhci_pdata ast2600_sdhci_pdata = {
+	.clk_div_start = 1,
+	.phase_desc = ast2600_sdhci_phase,
+	.nr_phase_descs = ARRAY_SIZE(ast2600_sdhci_phase),
+};
+
+static const struct of_device_id aspeed_sdhci_of_match[] = {
+	{ .compatible = "aspeed,ast2400-sdhci", .data = &ast2400_sdhci_pdata, },
+	{ .compatible = "aspeed,ast2500-sdhci", .data = &ast2400_sdhci_pdata, },
+	{ .compatible = "aspeed,ast2600-sdhci", .data = &ast2600_sdhci_pdata, },
+	{ }
+};
+
+static struct platform_driver aspeed_sdhci_driver = {
+	.driver		= {
+		.name	= "sdhci-aspeed",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+		.of_match_table = aspeed_sdhci_of_match,
+	},
+	.probe		= aspeed_sdhci_probe,
+	.remove		= aspeed_sdhci_remove,
+};
+
+static int aspeed_sdc_probe(struct platform_device *pdev)
+
+{
+	struct device_node *parent, *child;
+	struct aspeed_sdc *sdc;
+	int ret;
+
+	sdc = devm_kzalloc(&pdev->dev, sizeof(*sdc), GFP_KERNEL);
+	if (!sdc)
+		return -ENOMEM;
+
+	spin_lock_init(&sdc->lock);
+
+	sdc->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(sdc->clk))
+		return PTR_ERR(sdc->clk);
+
+	ret = clk_prepare_enable(sdc->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to enable SDCLK\n");
+		return ret;
+	}
+
+	sdc->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	sdc->regs = devm_ioremap_resource(&pdev->dev, sdc->res);
+	if (IS_ERR(sdc->regs)) {
+		ret = PTR_ERR(sdc->regs);
+		goto err_clk;
+	}
+
+	dev_set_drvdata(&pdev->dev, sdc);
+
+	parent = pdev->dev.of_node;
+	for_each_available_child_of_node(parent, child) {
+		struct platform_device *cpdev;
+
+		cpdev = of_platform_device_create(child, NULL, &pdev->dev);
+		if (!cpdev) {
+			of_node_put(child);
+			ret = -ENODEV;
+			goto err_clk;
+		}
+	}
+
+	return 0;
+
+err_clk:
+	clk_disable_unprepare(sdc->clk);
+	return ret;
+}
+
+static int aspeed_sdc_remove(struct platform_device *pdev)
+{
+	struct aspeed_sdc *sdc = dev_get_drvdata(&pdev->dev);
+
+	clk_disable_unprepare(sdc->clk);
+
+	return 0;
+}
+
+static const struct of_device_id aspeed_sdc_of_match[] = {
+	{ .compatible = "aspeed,ast2400-sd-controller", },
+	{ .compatible = "aspeed,ast2500-sd-controller", },
+	{ .compatible = "aspeed,ast2600-sd-controller", },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, aspeed_sdc_of_match);
+
+static struct platform_driver aspeed_sdc_driver = {
+	.driver		= {
+		.name	= "sd-controller-aspeed",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+		.pm	= &sdhci_pltfm_pmops,
+		.of_match_table = aspeed_sdc_of_match,
+	},
+	.probe		= aspeed_sdc_probe,
+	.remove		= aspeed_sdc_remove,
+};
+
+#if defined(CONFIG_MMC_SDHCI_OF_ASPEED_TEST)
+#include "sdhci-of-aspeed-test.c"
+#endif
+
+static int __init aspeed_sdc_init(void)
+{
+	int rc;
+
+	rc = platform_driver_register(&aspeed_sdhci_driver);
+	if (rc < 0)
+		return rc;
+
+	rc = platform_driver_register(&aspeed_sdc_driver);
+	if (rc < 0)
+		platform_driver_unregister(&aspeed_sdhci_driver);
+
+	return rc;
+}
+module_init(aspeed_sdc_init);
+
+static void __exit aspeed_sdc_exit(void)
+{
+	platform_driver_unregister(&aspeed_sdc_driver);
+	platform_driver_unregister(&aspeed_sdhci_driver);
+}
+module_exit(aspeed_sdc_exit);
+
+MODULE_DESCRIPTION("Driver for the ASPEED SD/SDIO/SDHCI Controllers");
+MODULE_AUTHOR("Ryan Chen <ryan_chen@aspeedtech.com>");
+MODULE_AUTHOR("Andrew Jeffery <andrew@aj.id.au>");
+MODULE_LICENSE("GPL");