Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 583 insertions, 0 deletions

diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
new file mode 100644
index 000000000..a6d89a3f1
--- /dev/null
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -0,0 +1,583 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2010 Marvell International Ltd.
+ *		Zhangfei Gao <zhangfei.gao@marvell.com>
+ *		Kevin Wang <dwang4@marvell.com>
+ *		Mingwei Wang <mwwang@marvell.com>
+ *		Philip Rakity <prakity@marvell.com>
+ *		Mark Brown <markb@marvell.com>
+ */
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_data/pxa_sdhci.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/mbus.h>
+
+#include "sdhci.h"
+#include "sdhci-pltfm.h"
+
+#define PXAV3_RPM_DELAY_MS     50
+
+#define SD_CLOCK_BURST_SIZE_SETUP		0x10A
+#define SDCLK_SEL	0x100
+#define SDCLK_DELAY_SHIFT	9
+#define SDCLK_DELAY_MASK	0x1f
+
+#define SD_CFG_FIFO_PARAM       0x100
+#define SDCFG_GEN_PAD_CLK_ON	(1<<6)
+#define SDCFG_GEN_PAD_CLK_CNT_MASK	0xFF
+#define SDCFG_GEN_PAD_CLK_CNT_SHIFT	24
+
+#define SD_SPI_MODE          0x108
+#define SD_CE_ATA_1          0x10C
+
+#define SD_CE_ATA_2          0x10E
+#define SDCE_MISC_INT		(1<<2)
+#define SDCE_MISC_INT_EN	(1<<1)
+
+struct sdhci_pxa {
+	struct clk *clk_core;
+	struct clk *clk_io;
+	u8	power_mode;
+	void __iomem *sdio3_conf_reg;
+};
+
+/*
+ * These registers are relative to the second register region, for the
+ * MBus bridge.
+ */
+#define SDHCI_WINDOW_CTRL(i)	(0x80 + ((i) << 3))
+#define SDHCI_WINDOW_BASE(i)	(0x84 + ((i) << 3))
+#define SDHCI_MAX_WIN_NUM	8
+
+/*
+ * Fields below belong to SDIO3 Configuration Register (third register
+ * region for the Armada 38x flavor)
+ */
+
+#define SDIO3_CONF_CLK_INV	BIT(0)
+#define SDIO3_CONF_SD_FB_CLK	BIT(2)
+
+static int mv_conf_mbus_windows(struct platform_device *pdev,
+				const struct mbus_dram_target_info *dram)
+{
+	int i;
+	void __iomem *regs;
+	struct resource *res;
+
+	if (!dram) {
+		dev_err(&pdev->dev, "no mbus dram info\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res) {
+		dev_err(&pdev->dev, "cannot get mbus registers\n");
+		return -EINVAL;
+	}
+
+	regs = ioremap(res->start, resource_size(res));
+	if (!regs) {
+		dev_err(&pdev->dev, "cannot map mbus registers\n");
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < SDHCI_MAX_WIN_NUM; i++) {
+		writel(0, regs + SDHCI_WINDOW_CTRL(i));
+		writel(0, regs + SDHCI_WINDOW_BASE(i));
+	}
+
+	for (i = 0; i < dram->num_cs; i++) {
+		const struct mbus_dram_window *cs = dram->cs + i;
+
+		/* Write size, attributes and target id to control register */
+		writel(((cs->size - 1) & 0xffff0000) |
+			(cs->mbus_attr << 8) |
+			(dram->mbus_dram_target_id << 4) | 1,
+			regs + SDHCI_WINDOW_CTRL(i));
+		/* Write base address to base register */
+		writel(cs->base, regs + SDHCI_WINDOW_BASE(i));
+	}
+
+	iounmap(regs);
+
+	return 0;
+}
+
+static int armada_38x_quirks(struct platform_device *pdev,
+			     struct sdhci_host *host)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
+	struct resource *res;
+
+	host->quirks &= ~SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN;
+	host->quirks |= SDHCI_QUIRK_MISSING_CAPS;
+
+	host->caps = sdhci_readl(host, SDHCI_CAPABILITIES);
+	host->caps1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+					   "conf-sdio3");
+	if (res) {
+		pxa->sdio3_conf_reg = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(pxa->sdio3_conf_reg))
+			return PTR_ERR(pxa->sdio3_conf_reg);
+	} else {
+		/*
+		 * According to erratum 'FE-2946959' both SDR50 and DDR50
+		 * modes require specific clock adjustments in SDIO3
+		 * Configuration register, if the adjustment is not done,
+		 * remove them from the capabilities.
+		 */
+		host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_DDR50);
+
+		dev_warn(&pdev->dev, "conf-sdio3 register not found: disabling SDR50 and DDR50 modes.\nConsider updating your dtb\n");
+	}
+
+	/*
+	 * According to erratum 'ERR-7878951' Armada 38x SDHCI
+	 * controller has different capabilities than the ones shown
+	 * in its registers
+	 */
+	if (of_property_read_bool(np, "no-1-8-v")) {
+		host->caps &= ~SDHCI_CAN_VDD_180;
+		host->mmc->caps &= ~MMC_CAP_1_8V_DDR;
+	} else {
+		host->caps &= ~SDHCI_CAN_VDD_330;
+	}
+	host->caps1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_USE_SDR50_TUNING);
+
+	return 0;
+}
+
+static void pxav3_reset(struct sdhci_host *host, u8 mask)
+{
+	struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc));
+	struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
+
+	sdhci_reset(host, mask);
+
+	if (mask == SDHCI_RESET_ALL) {
+		/*
+		 * tune timing of read data/command when crc error happen
+		 * no performance impact
+		 */
+		if (pdata && 0 != pdata->clk_delay_cycles) {
+			u16 tmp;
+
+			tmp = readw(host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
+			tmp |= (pdata->clk_delay_cycles & SDCLK_DELAY_MASK)
+				<< SDCLK_DELAY_SHIFT;
+			tmp |= SDCLK_SEL;
+			writew(tmp, host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
+		}
+	}
+}
+
+#define MAX_WAIT_COUNT 5
+static void pxav3_gen_init_74_clocks(struct sdhci_host *host, u8 power_mode)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
+	u16 tmp;
+	int count;
+
+	if (pxa->power_mode == MMC_POWER_UP
+			&& power_mode == MMC_POWER_ON) {
+
+		dev_dbg(mmc_dev(host->mmc),
+				"%s: slot->power_mode = %d,"
+				"ios->power_mode = %d\n",
+				__func__,
+				pxa->power_mode,
+				power_mode);
+
+		/* set we want notice of when 74 clocks are sent */
+		tmp = readw(host->ioaddr + SD_CE_ATA_2);
+		tmp |= SDCE_MISC_INT_EN;
+		writew(tmp, host->ioaddr + SD_CE_ATA_2);
+
+		/* start sending the 74 clocks */
+		tmp = readw(host->ioaddr + SD_CFG_FIFO_PARAM);
+		tmp |= SDCFG_GEN_PAD_CLK_ON;
+		writew(tmp, host->ioaddr + SD_CFG_FIFO_PARAM);
+
+		/* slowest speed is about 100KHz or 10usec per clock */
+		udelay(740);
+		count = 0;
+
+		while (count++ < MAX_WAIT_COUNT) {
+			if ((readw(host->ioaddr + SD_CE_ATA_2)
+						& SDCE_MISC_INT) == 0)
+				break;
+			udelay(10);
+		}
+
+		if (count == MAX_WAIT_COUNT)
+			dev_warn(mmc_dev(host->mmc), "74 clock interrupt not cleared\n");
+
+		/* clear the interrupt bit if posted */
+		tmp = readw(host->ioaddr + SD_CE_ATA_2);
+		tmp |= SDCE_MISC_INT;
+		writew(tmp, host->ioaddr + SD_CE_ATA_2);
+	}
+	pxa->power_mode = power_mode;
+}
+
+static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
+	u16 ctrl_2;
+
+	/*
+	 * Set V18_EN -- UHS modes do not work without this.
+	 * does not change signaling voltage
+	 */
+	ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+
+	/* Select Bus Speed Mode for host */
+	ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
+	switch (uhs) {
+	case MMC_TIMING_UHS_SDR12:
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
+		break;
+	case MMC_TIMING_UHS_SDR25:
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
+		break;
+	case MMC_TIMING_UHS_SDR50:
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180;
+		break;
+	case MMC_TIMING_UHS_SDR104:
+		ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180;
+		break;
+	case MMC_TIMING_MMC_DDR52:
+	case MMC_TIMING_UHS_DDR50:
+		ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180;
+		break;
+	}
+
+	/*
+	 * Update SDIO3 Configuration register according to erratum
+	 * FE-2946959
+	 */
+	if (pxa->sdio3_conf_reg) {
+		u8 reg_val  = readb(pxa->sdio3_conf_reg);
+
+		if (uhs == MMC_TIMING_UHS_SDR50 ||
+		    uhs == MMC_TIMING_UHS_DDR50) {
+			reg_val &= ~SDIO3_CONF_CLK_INV;
+			reg_val |= SDIO3_CONF_SD_FB_CLK;
+		} else if (uhs == MMC_TIMING_MMC_HS) {
+			reg_val &= ~SDIO3_CONF_CLK_INV;
+			reg_val &= ~SDIO3_CONF_SD_FB_CLK;
+		} else {
+			reg_val |= SDIO3_CONF_CLK_INV;
+			reg_val &= ~SDIO3_CONF_SD_FB_CLK;
+		}
+		writeb(reg_val, pxa->sdio3_conf_reg);
+	}
+
+	sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+	dev_dbg(mmc_dev(host->mmc),
+		"%s uhs = %d, ctrl_2 = %04X\n",
+		__func__, uhs, ctrl_2);
+}
+
+static void pxav3_set_power(struct sdhci_host *host, unsigned char mode,
+			    unsigned short vdd)
+{
+	struct mmc_host *mmc = host->mmc;
+	u8 pwr = host->pwr;
+
+	sdhci_set_power_noreg(host, mode, vdd);
+
+	if (host->pwr == pwr)
+		return;
+
+	if (host->pwr == 0)
+		vdd = 0;
+
+	if (!IS_ERR(mmc->supply.vmmc))
+		mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
+}
+
+static const struct sdhci_ops pxav3_sdhci_ops = {
+	.set_clock = sdhci_set_clock,
+	.set_power = pxav3_set_power,
+	.platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
+	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
+	.set_bus_width = sdhci_set_bus_width,
+	.reset = pxav3_reset,
+	.set_uhs_signaling = pxav3_set_uhs_signaling,
+};
+
+static const struct sdhci_pltfm_data sdhci_pxav3_pdata = {
+	.quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK
+		| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
+		| SDHCI_QUIRK_32BIT_ADMA_SIZE
+		| SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
+	.ops = &pxav3_sdhci_ops,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id sdhci_pxav3_of_match[] = {
+	{
+		.compatible = "mrvl,pxav3-mmc",
+	},
+	{
+		.compatible = "marvell,armada-380-sdhci",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, sdhci_pxav3_of_match);
+
+static struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev)
+{
+	struct sdhci_pxa_platdata *pdata;
+	struct device_node *np = dev->of_node;
+	u32 clk_delay_cycles;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return NULL;
+
+	if (!of_property_read_u32(np, "mrvl,clk-delay-cycles",
+				  &clk_delay_cycles))
+		pdata->clk_delay_cycles = clk_delay_cycles;
+
+	return pdata;
+}
+#else
+static inline struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev)
+{
+	return NULL;
+}
+#endif
+
+static int sdhci_pxav3_probe(struct platform_device *pdev)
+{
+	struct sdhci_pltfm_host *pltfm_host;
+	struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = pdev->dev.of_node;
+	struct sdhci_host *host = NULL;
+	struct sdhci_pxa *pxa = NULL;
+	const struct of_device_id *match;
+	int ret;
+
+	host = sdhci_pltfm_init(pdev, &sdhci_pxav3_pdata, sizeof(*pxa));
+	if (IS_ERR(host))
+		return PTR_ERR(host);
+
+	pltfm_host = sdhci_priv(host);
+	pxa = sdhci_pltfm_priv(pltfm_host);
+
+	pxa->clk_io = devm_clk_get(dev, "io");
+	if (IS_ERR(pxa->clk_io))
+		pxa->clk_io = devm_clk_get(dev, NULL);
+	if (IS_ERR(pxa->clk_io)) {
+		dev_err(dev, "failed to get io clock\n");
+		ret = PTR_ERR(pxa->clk_io);
+		goto err_clk_get;
+	}
+	pltfm_host->clk = pxa->clk_io;
+	clk_prepare_enable(pxa->clk_io);
+
+	pxa->clk_core = devm_clk_get(dev, "core");
+	if (!IS_ERR(pxa->clk_core))
+		clk_prepare_enable(pxa->clk_core);
+
+	/* enable 1/8V DDR capable */
+	host->mmc->caps |= MMC_CAP_1_8V_DDR;
+
+	if (of_device_is_compatible(np, "marvell,armada-380-sdhci")) {
+		ret = armada_38x_quirks(pdev, host);
+		if (ret < 0)
+			goto err_mbus_win;
+		ret = mv_conf_mbus_windows(pdev, mv_mbus_dram_info());
+		if (ret < 0)
+			goto err_mbus_win;
+	}
+
+	match = of_match_device(of_match_ptr(sdhci_pxav3_of_match), &pdev->dev);
+	if (match) {
+		ret = mmc_of_parse(host->mmc);
+		if (ret)
+			goto err_of_parse;
+		sdhci_get_of_property(pdev);
+		pdata = pxav3_get_mmc_pdata(dev);
+		pdev->dev.platform_data = pdata;
+	} else if (pdata) {
+		/* on-chip device */
+		if (pdata->flags & PXA_FLAG_CARD_PERMANENT)
+			host->mmc->caps |= MMC_CAP_NONREMOVABLE;
+
+		/* If slot design supports 8 bit data, indicate this to MMC. */
+		if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT)
+			host->mmc->caps |= MMC_CAP_8_BIT_DATA;
+
+		if (pdata->quirks)
+			host->quirks |= pdata->quirks;
+		if (pdata->quirks2)
+			host->quirks2 |= pdata->quirks2;
+		if (pdata->host_caps)
+			host->mmc->caps |= pdata->host_caps;
+		if (pdata->host_caps2)
+			host->mmc->caps2 |= pdata->host_caps2;
+		if (pdata->pm_caps)
+			host->mmc->pm_caps |= pdata->pm_caps;
+	}
+
+	pm_runtime_get_noresume(&pdev->dev);
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(&pdev->dev, PXAV3_RPM_DELAY_MS);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+	pm_suspend_ignore_children(&pdev->dev, 1);
+
+	ret = sdhci_add_host(host);
+	if (ret)
+		goto err_add_host;
+
+	if (host->mmc->pm_caps & MMC_PM_WAKE_SDIO_IRQ)
+		device_init_wakeup(&pdev->dev, 1);
+
+	pm_runtime_put_autosuspend(&pdev->dev);
+
+	return 0;
+
+err_add_host:
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+err_of_parse:
+err_mbus_win:
+	clk_disable_unprepare(pxa->clk_io);
+	clk_disable_unprepare(pxa->clk_core);
+err_clk_get:
+	sdhci_pltfm_free(pdev);
+	return ret;
+}
+
+static int sdhci_pxav3_remove(struct platform_device *pdev)
+{
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
+
+	pm_runtime_get_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+
+	sdhci_remove_host(host, 1);
+
+	clk_disable_unprepare(pxa->clk_io);
+	clk_disable_unprepare(pxa->clk_core);
+
+	sdhci_pltfm_free(pdev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int sdhci_pxav3_suspend(struct device *dev)
+{
+	int ret;
+	struct sdhci_host *host = dev_get_drvdata(dev);
+
+	pm_runtime_get_sync(dev);
+	if (host->tuning_mode != SDHCI_TUNING_MODE_3)
+		mmc_retune_needed(host->mmc);
+	ret = sdhci_suspend_host(host);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return ret;
+}
+
+static int sdhci_pxav3_resume(struct device *dev)
+{
+	int ret;
+	struct sdhci_host *host = dev_get_drvdata(dev);
+
+	pm_runtime_get_sync(dev);
+	ret = sdhci_resume_host(host);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return ret;
+}
+#endif
+
+#ifdef CONFIG_PM
+static int sdhci_pxav3_runtime_suspend(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
+	int ret;
+
+	ret = sdhci_runtime_suspend_host(host);
+	if (ret)
+		return ret;
+
+	if (host->tuning_mode != SDHCI_TUNING_MODE_3)
+		mmc_retune_needed(host->mmc);
+
+	clk_disable_unprepare(pxa->clk_io);
+	if (!IS_ERR(pxa->clk_core))
+		clk_disable_unprepare(pxa->clk_core);
+
+	return 0;
+}
+
+static int sdhci_pxav3_runtime_resume(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
+
+	clk_prepare_enable(pxa->clk_io);
+	if (!IS_ERR(pxa->clk_core))
+		clk_prepare_enable(pxa->clk_core);
+
+	return sdhci_runtime_resume_host(host, 0);
+}
+#endif
+
+static const struct dev_pm_ops sdhci_pxav3_pmops = {
+	SET_SYSTEM_SLEEP_PM_OPS(sdhci_pxav3_suspend, sdhci_pxav3_resume)
+	SET_RUNTIME_PM_OPS(sdhci_pxav3_runtime_suspend,
+		sdhci_pxav3_runtime_resume, NULL)
+};
+
+static struct platform_driver sdhci_pxav3_driver = {
+	.driver		= {
+		.name	= "sdhci-pxav3",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+		.of_match_table = of_match_ptr(sdhci_pxav3_of_match),
+		.pm	= &sdhci_pxav3_pmops,
+	},
+	.probe		= sdhci_pxav3_probe,
+	.remove		= sdhci_pxav3_remove,
+};
+
+module_platform_driver(sdhci_pxav3_driver);
+
+MODULE_DESCRIPTION("SDHCI driver for pxav3");
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_LICENSE("GPL v2");
+