Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 275 insertions, 0 deletions

diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
new file mode 100644
index 000000000..de56e6534
--- /dev/null
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -0,0 +1,275 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Driver for the MMC / SD / SDIO cell found in:
+ *
+ * TC6393XB TC6391XB TC6387XB T7L66XB ASIC3
+ *
+ * Copyright (C) 2015-19 Renesas Electronics Corporation
+ * Copyright (C) 2016-19 Sang Engineering, Wolfram Sang
+ * Copyright (C) 2016-17 Horms Solutions, Simon Horman
+ * Copyright (C) 2007 Ian Molton
+ * Copyright (C) 2004 Ian Molton
+ */
+
+#ifndef TMIO_MMC_H
+#define TMIO_MMC_H
+
+#include <linux/dmaengine.h>
+#include <linux/highmem.h>
+#include <linux/mutex.h>
+#include <linux/pagemap.h>
+#include <linux/scatterlist.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+
+#define CTL_SD_CMD 0x00
+#define CTL_ARG_REG 0x04
+#define CTL_STOP_INTERNAL_ACTION 0x08
+#define CTL_XFER_BLK_COUNT 0xa
+#define CTL_RESPONSE 0x0c
+/* driver merges STATUS and following STATUS2 */
+#define CTL_STATUS 0x1c
+/* driver merges IRQ_MASK and following IRQ_MASK2 */
+#define CTL_IRQ_MASK 0x20
+#define CTL_SD_CARD_CLK_CTL 0x24
+#define CTL_SD_XFER_LEN 0x26
+#define CTL_SD_MEM_CARD_OPT 0x28
+#define CTL_SD_ERROR_DETAIL_STATUS 0x2c
+#define CTL_SD_DATA_PORT 0x30
+#define CTL_TRANSACTION_CTL 0x34
+#define CTL_SDIO_STATUS 0x36
+#define CTL_SDIO_IRQ_MASK 0x38
+#define CTL_DMA_ENABLE 0xd8
+#define CTL_RESET_SD 0xe0
+#define CTL_VERSION 0xe2
+#define CTL_SDIF_MODE 0xe6 /* only known on R-Car 2+ */
+
+/* Definitions for values the CTL_STOP_INTERNAL_ACTION register can take */
+#define TMIO_STOP_STP		BIT(0)
+#define TMIO_STOP_SEC		BIT(8)
+
+/* Definitions for values the CTL_STATUS register can take */
+#define TMIO_STAT_CMDRESPEND    BIT(0)
+#define TMIO_STAT_DATAEND       BIT(2)
+#define TMIO_STAT_CARD_REMOVE   BIT(3)
+#define TMIO_STAT_CARD_INSERT   BIT(4)
+#define TMIO_STAT_SIGSTATE      BIT(5)
+#define TMIO_STAT_WRPROTECT     BIT(7)
+#define TMIO_STAT_CARD_REMOVE_A BIT(8)
+#define TMIO_STAT_CARD_INSERT_A BIT(9)
+#define TMIO_STAT_SIGSTATE_A    BIT(10)
+
+/* These belong technically to CTL_STATUS2, but the driver merges them */
+#define TMIO_STAT_CMD_IDX_ERR   BIT(16)
+#define TMIO_STAT_CRCFAIL       BIT(17)
+#define TMIO_STAT_STOPBIT_ERR   BIT(18)
+#define TMIO_STAT_DATATIMEOUT   BIT(19)
+#define TMIO_STAT_RXOVERFLOW    BIT(20)
+#define TMIO_STAT_TXUNDERRUN    BIT(21)
+#define TMIO_STAT_CMDTIMEOUT    BIT(22)
+#define TMIO_STAT_DAT0		BIT(23)	/* only known on R-Car so far */
+#define TMIO_STAT_RXRDY         BIT(24)
+#define TMIO_STAT_TXRQ          BIT(25)
+#define TMIO_STAT_ALWAYS_SET_27	BIT(27) /* only known on R-Car 2+ so far */
+#define TMIO_STAT_ILL_FUNC      BIT(29) /* only when !TMIO_MMC_HAS_IDLE_WAIT */
+#define TMIO_STAT_SCLKDIVEN     BIT(29) /* only when TMIO_MMC_HAS_IDLE_WAIT */
+#define TMIO_STAT_CMD_BUSY      BIT(30)
+#define TMIO_STAT_ILL_ACCESS    BIT(31)
+
+/* Definitions for values the CTL_SD_CARD_CLK_CTL register can take */
+#define	CLK_CTL_DIV_MASK	0xff
+#define	CLK_CTL_SCLKEN		BIT(8)
+
+/* Definitions for values the CTL_SD_MEM_CARD_OPT register can take */
+#define CARD_OPT_TOP_MASK	0xf0
+#define CARD_OPT_TOP_SHIFT	4
+#define CARD_OPT_EXTOP		BIT(9) /* first appeared on R-Car Gen3 SDHI */
+#define CARD_OPT_WIDTH8		BIT(13)
+#define CARD_OPT_ALWAYS1	BIT(14)
+#define CARD_OPT_WIDTH		BIT(15)
+
+/* Definitions for values the CTL_SDIO_STATUS register can take */
+#define TMIO_SDIO_STAT_IOIRQ	0x0001
+#define TMIO_SDIO_STAT_EXPUB52	0x4000
+#define TMIO_SDIO_STAT_EXWT	0x8000
+#define TMIO_SDIO_MASK_ALL	0xc007
+
+#define TMIO_SDIO_SETBITS_MASK	0x0006
+
+/* Definitions for values the CTL_DMA_ENABLE register can take */
+#define DMA_ENABLE_DMASDRW	BIT(1)
+
+/* Definitions for values the CTL_SDIF_MODE register can take */
+#define SDIF_MODE_HS400		BIT(0) /* only known on R-Car 2+ */
+
+/* Define some IRQ masks */
+/* This is the mask used at reset by the chip */
+#define TMIO_MASK_ALL           0x837f031d
+#define TMIO_MASK_ALL_RCAR2	0x8b7f031d
+#define TMIO_MASK_READOP  (TMIO_STAT_RXRDY | TMIO_STAT_DATAEND)
+#define TMIO_MASK_WRITEOP (TMIO_STAT_TXRQ | TMIO_STAT_DATAEND)
+#define TMIO_MASK_CMD     (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT | \
+		TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT)
+#define TMIO_MASK_IRQ     (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD)
+
+#define TMIO_MAX_BLK_SIZE 512
+
+struct tmio_mmc_data;
+struct tmio_mmc_host;
+
+struct tmio_mmc_dma_ops {
+	void (*start)(struct tmio_mmc_host *host, struct mmc_data *data);
+	void (*enable)(struct tmio_mmc_host *host, bool enable);
+	void (*request)(struct tmio_mmc_host *host,
+			struct tmio_mmc_data *pdata);
+	void (*release)(struct tmio_mmc_host *host);
+	void (*abort)(struct tmio_mmc_host *host);
+	void (*dataend)(struct tmio_mmc_host *host);
+
+	/* optional */
+	void (*end)(struct tmio_mmc_host *host);	/* held host->lock */
+	bool (*dma_irq)(struct tmio_mmc_host *host);
+};
+
+struct tmio_mmc_host {
+	void __iomem *ctl;
+	struct mmc_command      *cmd;
+	struct mmc_request      *mrq;
+	struct mmc_data         *data;
+	struct mmc_host         *mmc;
+	struct mmc_host_ops     ops;
+
+	/* Callbacks for clock / power control */
+	void (*set_pwr)(struct platform_device *host, int state);
+
+	/* pio related stuff */
+	struct scatterlist      *sg_ptr;
+	struct scatterlist      *sg_orig;
+	unsigned int            sg_len;
+	unsigned int            sg_off;
+	unsigned int		bus_shift;
+
+	struct platform_device *pdev;
+	struct tmio_mmc_data *pdata;
+
+	/* DMA support */
+	bool			dma_on;
+	struct dma_chan		*chan_rx;
+	struct dma_chan		*chan_tx;
+	struct tasklet_struct	dma_issue;
+	struct scatterlist	bounce_sg;
+	u8			*bounce_buf;
+
+	/* Track lost interrupts */
+	struct delayed_work	delayed_reset_work;
+	struct work_struct	done;
+
+	/* Cache */
+	u32			sdcard_irq_mask;
+	u32			sdio_irq_mask;
+	unsigned int		clk_cache;
+	u32			sdcard_irq_setbit_mask;
+	u32			sdcard_irq_mask_all;
+
+	spinlock_t		lock;		/* protect host private data */
+	unsigned long		last_req_ts;
+	struct mutex		ios_lock;	/* protect set_ios() context */
+	bool			native_hotplug;
+	bool			sdio_irq_enabled;
+
+	/* Mandatory callback */
+	int (*clk_enable)(struct tmio_mmc_host *host);
+	void (*set_clock)(struct tmio_mmc_host *host, unsigned int clock);
+
+	/* Optional callbacks */
+	void (*clk_disable)(struct tmio_mmc_host *host);
+	int (*multi_io_quirk)(struct mmc_card *card,
+			      unsigned int direction, int blk_size);
+	int (*write16_hook)(struct tmio_mmc_host *host, int addr);
+	void (*reset)(struct tmio_mmc_host *host, bool preserve);
+	bool (*check_retune)(struct tmio_mmc_host *host, struct mmc_request *mrq);
+	void (*fixup_request)(struct tmio_mmc_host *host, struct mmc_request *mrq);
+	unsigned int (*get_timeout_cycles)(struct tmio_mmc_host *host);
+
+	const struct tmio_mmc_dma_ops *dma_ops;
+};
+
+struct tmio_mmc_host *tmio_mmc_host_alloc(struct platform_device *pdev,
+					  struct tmio_mmc_data *pdata);
+void tmio_mmc_host_free(struct tmio_mmc_host *host);
+int tmio_mmc_host_probe(struct tmio_mmc_host *host);
+void tmio_mmc_host_remove(struct tmio_mmc_host *host);
+void tmio_mmc_do_data_irq(struct tmio_mmc_host *host);
+
+void tmio_mmc_enable_mmc_irqs(struct tmio_mmc_host *host, u32 i);
+void tmio_mmc_disable_mmc_irqs(struct tmio_mmc_host *host, u32 i);
+irqreturn_t tmio_mmc_irq(int irq, void *devid);
+
+#ifdef CONFIG_PM
+int tmio_mmc_host_runtime_suspend(struct device *dev);
+int tmio_mmc_host_runtime_resume(struct device *dev);
+#endif
+
+static inline u16 sd_ctrl_read16(struct tmio_mmc_host *host, int addr)
+{
+	return ioread16(host->ctl + (addr << host->bus_shift));
+}
+
+static inline void sd_ctrl_read16_rep(struct tmio_mmc_host *host, int addr,
+				      u16 *buf, int count)
+{
+	ioread16_rep(host->ctl + (addr << host->bus_shift), buf, count);
+}
+
+static inline u32 sd_ctrl_read16_and_16_as_32(struct tmio_mmc_host *host,
+					      int addr)
+{
+	return ioread16(host->ctl + (addr << host->bus_shift)) |
+	       ioread16(host->ctl + ((addr + 2) << host->bus_shift)) << 16;
+}
+
+static inline void sd_ctrl_read32_rep(struct tmio_mmc_host *host, int addr,
+				      u32 *buf, int count)
+{
+	ioread32_rep(host->ctl + (addr << host->bus_shift), buf, count);
+}
+
+static inline void sd_ctrl_write16(struct tmio_mmc_host *host, int addr,
+				   u16 val)
+{
+	/* If there is a hook and it returns non-zero then there
+	 * is an error and the write should be skipped
+	 */
+	if (host->write16_hook && host->write16_hook(host, addr))
+		return;
+	iowrite16(val, host->ctl + (addr << host->bus_shift));
+}
+
+static inline void sd_ctrl_write16_rep(struct tmio_mmc_host *host, int addr,
+				       u16 *buf, int count)
+{
+	iowrite16_rep(host->ctl + (addr << host->bus_shift), buf, count);
+}
+
+static inline void sd_ctrl_write32_as_16_and_16(struct tmio_mmc_host *host,
+						int addr, u32 val)
+{
+	if (addr == CTL_IRQ_MASK || addr == CTL_STATUS)
+		val |= host->sdcard_irq_setbit_mask;
+
+	iowrite16(val & 0xffff, host->ctl + (addr << host->bus_shift));
+	iowrite16(val >> 16, host->ctl + ((addr + 2) << host->bus_shift));
+}
+
+static inline void sd_ctrl_write32(struct tmio_mmc_host *host, int addr, u32 val)
+{
+	iowrite32(val, host->ctl + (addr << host->bus_shift));
+}
+
+static inline void sd_ctrl_write32_rep(struct tmio_mmc_host *host, int addr,
+				       const u32 *buf, int count)
+{
+	iowrite32_rep(host->ctl + (addr << host->bus_shift), buf, count);
+}
+
+#endif