Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 172 insertions, 0 deletions

diff --git a/drivers/mmc/host/toshsd.h b/drivers/mmc/host/toshsd.h
new file mode 100644
index 000000000..3ba876eaa
--- /dev/null
+++ b/drivers/mmc/host/toshsd.h
@@ -0,0 +1,172 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  Toshiba PCI Secure Digital Host Controller Interface driver
+ *
+ *  Copyright (C) 2014 Ondrej Zary
+ *  Copyright (C) 2007 Richard Betts, All Rights Reserved.
+ *
+ *      Based on asic3_mmc.c Copyright (c) 2005 SDG Systems, LLC
+ */
+
+#define HCLK	33000000	/* 33 MHz (PCI clock) */
+
+#define SD_PCICFG_CLKSTOP	0x40	/* 0x1f = clock controller, 0 = stop */
+#define SD_PCICFG_GATEDCLK	0x41	/* Gated clock */
+#define SD_PCICFG_CLKMODE	0x42	/* Control clock of SD controller */
+#define SD_PCICFG_PINSTATUS	0x44	/* R/O: read status of SD pins */
+#define SD_PCICFG_POWER1	0x48
+#define SD_PCICFG_POWER2	0x49
+#define SD_PCICFG_POWER3	0x4a
+#define SD_PCICFG_CARDDETECT	0x4c
+#define SD_PCICFG_SLOTS		0x50	/* R/O: define support slot number */
+#define SD_PCICFG_EXTGATECLK1	0xf0	/* Could be used for gated clock */
+#define SD_PCICFG_EXTGATECLK2	0xf1	/* Could be used for gated clock */
+#define SD_PCICFG_EXTGATECLK3	0xf9	/* Bit 1: double buffer/single buffer */
+#define SD_PCICFG_SDLED_ENABLE1	0xfa
+#define SD_PCICFG_SDLED_ENABLE2	0xfe
+
+#define SD_PCICFG_CLKMODE_DIV_DISABLE	BIT(0)
+#define SD_PCICFG_CLKSTOP_ENABLE_ALL	0x1f
+#define SD_PCICFG_LED_ENABLE1_START	0x12
+#define SD_PCICFG_LED_ENABLE2_START	0x80
+
+#define SD_PCICFG_PWR1_33V	0x08	/* Set for 3.3 volts */
+#define SD_PCICFG_PWR1_OFF	0x00	/* Turn off power */
+#define SD_PCICFG_PWR2_AUTO	0x02
+
+#define SD_CMD			0x00	/* also for SDIO */
+#define SD_ARG0			0x04	/* also for SDIO */
+#define SD_ARG1			0x06	/* also for SDIO */
+#define SD_STOPINTERNAL		0x08
+#define SD_BLOCKCOUNT		0x0a	/* also for SDIO */
+#define SD_RESPONSE0		0x0c	/* also for SDIO */
+#define SD_RESPONSE1		0x0e	/* also for SDIO */
+#define SD_RESPONSE2		0x10	/* also for SDIO */
+#define SD_RESPONSE3		0x12	/* also for SDIO */
+#define SD_RESPONSE4		0x14	/* also for SDIO */
+#define SD_RESPONSE5		0x16	/* also for SDIO */
+#define SD_RESPONSE6		0x18	/* also for SDIO */
+#define SD_RESPONSE7		0x1a	/* also for SDIO */
+#define SD_CARDSTATUS		0x1c	/* also for SDIO */
+#define SD_BUFFERCTRL		0x1e	/* also for SDIO */
+#define SD_INTMASKCARD		0x20	/* also for SDIO */
+#define SD_INTMASKBUFFER	0x22	/* also for SDIO */
+#define SD_CARDCLOCKCTRL	0x24
+#define SD_CARDXFERDATALEN	0x26	/* also for SDIO */
+#define SD_CARDOPTIONSETUP	0x28	/* also for SDIO */
+#define SD_ERRORSTATUS0		0x2c	/* also for SDIO */
+#define SD_ERRORSTATUS1		0x2e	/* also for SDIO */
+#define SD_DATAPORT		0x30	/* also for SDIO */
+#define SD_TRANSACTIONCTRL	0x34	/* also for SDIO */
+#define SD_SOFTWARERESET	0xe0	/* also for SDIO */
+
+/* registers above marked "also for SDIO" and all SDIO registers below can be
+ * accessed at SDIO_BASE + reg address */
+#define SDIO_BASE	 0x100
+
+#define SDIO_CARDPORTSEL	0x02
+#define SDIO_CARDINTCTRL	0x36
+#define SDIO_CLOCKNWAITCTRL	0x38
+#define SDIO_HOSTINFORMATION	0x3a
+#define SDIO_ERRORCTRL		0x3c
+#define SDIO_LEDCTRL		0x3e
+
+#define SD_TRANSCTL_SET		BIT(8)
+
+#define SD_CARDCLK_DIV_DISABLE	BIT(15)
+#define SD_CARDCLK_ENABLE_CLOCK	BIT(8)
+#define SD_CARDCLK_CLK_DIV_512	BIT(7)
+#define SD_CARDCLK_CLK_DIV_256	BIT(6)
+#define SD_CARDCLK_CLK_DIV_128	BIT(5)
+#define SD_CARDCLK_CLK_DIV_64	BIT(4)
+#define SD_CARDCLK_CLK_DIV_32	BIT(3)
+#define SD_CARDCLK_CLK_DIV_16	BIT(2)
+#define SD_CARDCLK_CLK_DIV_8	BIT(1)
+#define SD_CARDCLK_CLK_DIV_4	BIT(0)
+#define SD_CARDCLK_CLK_DIV_2	0
+
+#define SD_CARDOPT_REQUIRED		0x000e
+#define SD_CARDOPT_DATA_RESP_TIMEOUT(x)	(((x) & 0x0f) << 4) /* 4 bits */
+#define SD_CARDOPT_C2_MODULE_ABSENT	BIT(14)
+#define SD_CARDOPT_DATA_XFR_WIDTH_1	(1 << 15)
+#define SD_CARDOPT_DATA_XFR_WIDTH_4	(0 << 15)
+
+#define SD_CMD_TYPE_CMD			(0 << 6)
+#define SD_CMD_TYPE_ACMD		(1 << 6)
+#define SD_CMD_TYPE_AUTHEN		(2 << 6)
+#define SD_CMD_RESP_TYPE_NONE		(3 << 8)
+#define SD_CMD_RESP_TYPE_EXT_R1		(4 << 8)
+#define SD_CMD_RESP_TYPE_EXT_R1B	(5 << 8)
+#define SD_CMD_RESP_TYPE_EXT_R2		(6 << 8)
+#define SD_CMD_RESP_TYPE_EXT_R3		(7 << 8)
+#define SD_CMD_RESP_TYPE_EXT_R6		(4 << 8)
+#define SD_CMD_RESP_TYPE_EXT_R7		(4 << 8)
+#define SD_CMD_DATA_PRESENT		BIT(11)
+#define SD_CMD_TRANSFER_READ		BIT(12)
+#define SD_CMD_MULTI_BLOCK		BIT(13)
+#define SD_CMD_SECURITY_CMD		BIT(14)
+
+#define SD_STOPINT_ISSUE_CMD12		BIT(0)
+#define SD_STOPINT_AUTO_ISSUE_CMD12	BIT(8)
+
+#define SD_CARD_RESP_END	BIT(0)
+#define SD_CARD_RW_END		BIT(2)
+#define SD_CARD_CARD_REMOVED_0	BIT(3)
+#define SD_CARD_CARD_INSERTED_0	BIT(4)
+#define SD_CARD_PRESENT_0	BIT(5)
+#define SD_CARD_UNK6		BIT(6)
+#define SD_CARD_WRITE_PROTECT	BIT(7)
+#define SD_CARD_CARD_REMOVED_3	BIT(8)
+#define SD_CARD_CARD_INSERTED_3	BIT(9)
+#define SD_CARD_PRESENT_3	BIT(10)
+
+#define SD_BUF_CMD_INDEX_ERR	BIT(16)
+#define SD_BUF_CRC_ERR		BIT(17)
+#define SD_BUF_STOP_BIT_END_ERR	BIT(18)
+#define SD_BUF_DATA_TIMEOUT	BIT(19)
+#define SD_BUF_OVERFLOW		BIT(20)
+#define SD_BUF_UNDERFLOW	BIT(21)
+#define SD_BUF_CMD_TIMEOUT	BIT(22)
+#define SD_BUF_UNK7		BIT(23)
+#define SD_BUF_READ_ENABLE	BIT(24)
+#define SD_BUF_WRITE_ENABLE	BIT(25)
+#define SD_BUF_ILLEGAL_FUNCTION	BIT(29)
+#define SD_BUF_CMD_BUSY		BIT(30)
+#define SD_BUF_ILLEGAL_ACCESS	BIT(31)
+
+#define SD_ERR0_RESP_CMD_ERR			BIT(0)
+#define SD_ERR0_RESP_NON_CMD12_END_BIT_ERR	BIT(2)
+#define SD_ERR0_RESP_CMD12_END_BIT_ERR		BIT(3)
+#define SD_ERR0_READ_DATA_END_BIT_ERR		BIT(4)
+#define SD_ERR0_WRITE_CRC_STATUS_END_BIT_ERR	BIT(5)
+#define SD_ERR0_RESP_NON_CMD12_CRC_ERR		BIT(8)
+#define SD_ERR0_RESP_CMD12_CRC_ERR		BIT(9)
+#define SD_ERR0_READ_DATA_CRC_ERR		BIT(10)
+#define SD_ERR0_WRITE_CMD_CRC_ERR		BIT(11)
+
+#define SD_ERR1_NO_CMD_RESP		BIT(16)
+#define SD_ERR1_TIMEOUT_READ_DATA	BIT(20)
+#define SD_ERR1_TIMEOUT_CRS_STATUS	BIT(21)
+#define SD_ERR1_TIMEOUT_CRC_BUSY	BIT(22)
+
+#define IRQ_DONT_CARE_BITS (SD_CARD_PRESENT_3 \
+	| SD_CARD_WRITE_PROTECT \
+	| SD_CARD_UNK6 \
+	| SD_CARD_PRESENT_0 \
+	| SD_BUF_UNK7 \
+	| SD_BUF_CMD_BUSY)
+
+struct toshsd_host {
+	struct pci_dev *pdev;
+	struct mmc_host *mmc;
+
+	spinlock_t lock;
+
+	struct mmc_request *mrq;/* Current request */
+	struct mmc_command *cmd;/* Current command */
+	struct mmc_data *data;	/* Current data request */
+
+	struct sg_mapping_iter sg_miter; /* for PIO */
+
+	void __iomem *ioaddr; /* mapped address */
+};