Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 219 insertions, 0 deletions

diff --git a/drivers/mtd/maps/scx200_docflash.c b/drivers/mtd/maps/scx200_docflash.c
new file mode 100644
index 000000000..8462662b7
--- /dev/null
+++ b/drivers/mtd/maps/scx200_docflash.c
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* linux/drivers/mtd/maps/scx200_docflash.c
+
+   Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
+
+   National Semiconductor SCx200 flash mapped with DOCCS
+*/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/pci.h>
+#include <linux/scx200.h>
+
+#define NAME "scx200_docflash"
+
+MODULE_AUTHOR("Christer Weinigel <wingel@hack.org>");
+MODULE_DESCRIPTION("NatSemi SCx200 DOCCS Flash Driver");
+MODULE_LICENSE("GPL");
+
+static int probe = 0;		/* Don't autoprobe */
+static unsigned size = 0x1000000; /* 16 MiB the whole ISA address space */
+static unsigned width = 8;	/* Default to 8 bits wide */
+static char *flashtype = "cfi_probe";
+
+module_param(probe, int, 0);
+MODULE_PARM_DESC(probe, "Probe for a BIOS mapping");
+module_param(size, int, 0);
+MODULE_PARM_DESC(size, "Size of the flash mapping");
+module_param(width, int, 0);
+MODULE_PARM_DESC(width, "Data width of the flash mapping (8/16)");
+module_param(flashtype, charp, 0);
+MODULE_PARM_DESC(flashtype, "Type of MTD probe to do");
+
+static struct resource docmem = {
+	.flags = IORESOURCE_MEM,
+	.name  = "NatSemi SCx200 DOCCS Flash",
+};
+
+static struct mtd_info *mymtd;
+
+static struct mtd_partition partition_info[] = {
+	{
+		.name   = "DOCCS Boot kernel",
+		.offset = 0,
+		.size   = 0xc0000
+	},
+	{
+		.name   = "DOCCS Low BIOS",
+		.offset = 0xc0000,
+		.size   = 0x40000
+	},
+	{
+		.name   = "DOCCS File system",
+		.offset = 0x100000,
+		.size   = ~0	/* calculate from flash size */
+	},
+	{
+		.name   = "DOCCS High BIOS",
+		.offset = ~0, 	/* calculate from flash size */
+		.size   = 0x80000
+	},
+};
+#define NUM_PARTITIONS ARRAY_SIZE(partition_info)
+
+static struct map_info scx200_docflash_map = {
+	.name      = "NatSemi SCx200 DOCCS Flash",
+};
+
+static int __init init_scx200_docflash(void)
+{
+	unsigned u;
+	unsigned base;
+	unsigned ctrl;
+	unsigned pmr;
+	struct pci_dev *bridge;
+
+	printk(KERN_DEBUG NAME ": NatSemi SCx200 DOCCS Flash Driver\n");
+
+	if ((bridge = pci_get_device(PCI_VENDOR_ID_NS,
+				      PCI_DEVICE_ID_NS_SCx200_BRIDGE,
+				      NULL)) == NULL)
+		return -ENODEV;
+
+	/* check that we have found the configuration block */
+	if (!scx200_cb_present()) {
+		pci_dev_put(bridge);
+		return -ENODEV;
+	}
+
+	if (probe) {
+		/* Try to use the present flash mapping if any */
+		pci_read_config_dword(bridge, SCx200_DOCCS_BASE, &base);
+		pci_read_config_dword(bridge, SCx200_DOCCS_CTRL, &ctrl);
+		pci_dev_put(bridge);
+
+		pmr = inl(scx200_cb_base + SCx200_PMR);
+
+		if (base == 0
+		    || (ctrl & 0x07000000) != 0x07000000
+		    || (ctrl & 0x0007ffff) == 0)
+			return -ENODEV;
+
+		size = ((ctrl&0x1fff)<<13) + (1<<13);
+
+		for (u = size; u > 1; u >>= 1)
+			;
+		if (u != 1)
+			return -ENODEV;
+
+		if (pmr & (1<<6))
+			width = 16;
+		else
+			width = 8;
+
+		docmem.start = base;
+		docmem.end = base + size;
+
+		if (request_resource(&iomem_resource, &docmem)) {
+			printk(KERN_ERR NAME ": unable to allocate memory for flash mapping\n");
+			return -ENOMEM;
+		}
+	} else {
+		pci_dev_put(bridge);
+		for (u = size; u > 1; u >>= 1)
+			;
+		if (u != 1) {
+			printk(KERN_ERR NAME ": invalid size for flash mapping\n");
+			return -EINVAL;
+		}
+
+		if (width != 8 && width != 16) {
+			printk(KERN_ERR NAME ": invalid bus width for flash mapping\n");
+			return -EINVAL;
+		}
+
+		if (allocate_resource(&iomem_resource, &docmem,
+				      size,
+				      0xc0000000, 0xffffffff,
+				      size, NULL, NULL)) {
+			printk(KERN_ERR NAME ": unable to allocate memory for flash mapping\n");
+			return -ENOMEM;
+		}
+
+		ctrl = 0x07000000 | ((size-1) >> 13);
+
+		printk(KERN_INFO "DOCCS BASE=0x%08lx, CTRL=0x%08lx\n", (long)docmem.start, (long)ctrl);
+
+		pci_write_config_dword(bridge, SCx200_DOCCS_BASE, docmem.start);
+		pci_write_config_dword(bridge, SCx200_DOCCS_CTRL, ctrl);
+		pmr = inl(scx200_cb_base + SCx200_PMR);
+
+		if (width == 8) {
+			pmr &= ~(1<<6);
+		} else {
+			pmr |= (1<<6);
+		}
+		outl(pmr, scx200_cb_base + SCx200_PMR);
+	}
+
+	printk(KERN_INFO NAME ": DOCCS mapped at %pR, width %d\n",
+	       &docmem, width);
+
+	scx200_docflash_map.size = size;
+	if (width == 8)
+		scx200_docflash_map.bankwidth = 1;
+	else
+		scx200_docflash_map.bankwidth = 2;
+
+	simple_map_init(&scx200_docflash_map);
+
+	scx200_docflash_map.phys = docmem.start;
+	scx200_docflash_map.virt = ioremap(docmem.start, scx200_docflash_map.size);
+	if (!scx200_docflash_map.virt) {
+		printk(KERN_ERR NAME ": failed to ioremap the flash\n");
+		release_resource(&docmem);
+		return -EIO;
+	}
+
+	mymtd = do_map_probe(flashtype, &scx200_docflash_map);
+	if (!mymtd) {
+		printk(KERN_ERR NAME ": unable to detect flash\n");
+		iounmap(scx200_docflash_map.virt);
+		release_resource(&docmem);
+		return -ENXIO;
+	}
+
+	if (size < mymtd->size)
+		printk(KERN_WARNING NAME ": warning, flash mapping is smaller than flash size\n");
+
+	mymtd->owner = THIS_MODULE;
+
+	partition_info[3].offset = mymtd->size-partition_info[3].size;
+	partition_info[2].size = partition_info[3].offset-partition_info[2].offset;
+	mtd_device_register(mymtd, partition_info, NUM_PARTITIONS);
+
+	return 0;
+}
+
+static void __exit cleanup_scx200_docflash(void)
+{
+	if (mymtd) {
+		mtd_device_unregister(mymtd);
+		map_destroy(mymtd);
+	}
+	if (scx200_docflash_map.virt) {
+		iounmap(scx200_docflash_map.virt);
+		release_resource(&docmem);
+	}
+}
+
+module_init(init_scx200_docflash);
+module_exit(cleanup_scx200_docflash);