Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 599 insertions, 0 deletions

diff --git a/drivers/mtd/nand/ecc-mtk.c b/drivers/mtd/nand/ecc-mtk.c
new file mode 100644
index 000000000..9f9b201fe
--- /dev/null
+++ b/drivers/mtd/nand/ecc-mtk.c
@@ -0,0 +1,599 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * MTK ECC controller driver.
+ * Copyright (C) 2016  MediaTek Inc.
+ * Authors:	Xiaolei Li		<xiaolei.li@mediatek.com>
+ *		Jorge Ramirez-Ortiz	<jorge.ramirez-ortiz@linaro.org>
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/iopoll.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/mutex.h>
+#include <linux/mtd/nand-ecc-mtk.h>
+
+#define ECC_IDLE_MASK		BIT(0)
+#define ECC_IRQ_EN		BIT(0)
+#define ECC_PG_IRQ_SEL		BIT(1)
+#define ECC_OP_ENABLE		(1)
+#define ECC_OP_DISABLE		(0)
+
+#define ECC_ENCCON		(0x00)
+#define ECC_ENCCNFG		(0x04)
+#define		ECC_MS_SHIFT		(16)
+#define ECC_ENCDIADDR		(0x08)
+#define ECC_ENCIDLE		(0x0C)
+#define ECC_DECCON		(0x100)
+#define ECC_DECCNFG		(0x104)
+#define		DEC_EMPTY_EN		BIT(31)
+#define		DEC_CNFG_CORRECT	(0x3 << 12)
+#define ECC_DECIDLE		(0x10C)
+#define ECC_DECENUM0		(0x114)
+
+#define ECC_TIMEOUT		(500000)
+
+#define ECC_IDLE_REG(op)	((op) == ECC_ENCODE ? ECC_ENCIDLE : ECC_DECIDLE)
+#define ECC_CTL_REG(op)		((op) == ECC_ENCODE ? ECC_ENCCON : ECC_DECCON)
+
+struct mtk_ecc_caps {
+	u32 err_mask;
+	u32 err_shift;
+	const u8 *ecc_strength;
+	const u32 *ecc_regs;
+	u8 num_ecc_strength;
+	u8 ecc_mode_shift;
+	u32 parity_bits;
+	int pg_irq_sel;
+};
+
+struct mtk_ecc {
+	struct device *dev;
+	const struct mtk_ecc_caps *caps;
+	void __iomem *regs;
+	struct clk *clk;
+
+	struct completion done;
+	struct mutex lock;
+	u32 sectors;
+
+	u8 *eccdata;
+};
+
+/* ecc strength that each IP supports */
+static const u8 ecc_strength_mt2701[] = {
+	4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36,
+	40, 44, 48, 52, 56, 60
+};
+
+static const u8 ecc_strength_mt2712[] = {
+	4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36,
+	40, 44, 48, 52, 56, 60, 68, 72, 80
+};
+
+static const u8 ecc_strength_mt7622[] = {
+	4, 6, 8, 10, 12
+};
+
+enum mtk_ecc_regs {
+	ECC_ENCPAR00,
+	ECC_ENCIRQ_EN,
+	ECC_ENCIRQ_STA,
+	ECC_DECDONE,
+	ECC_DECIRQ_EN,
+	ECC_DECIRQ_STA,
+};
+
+static int mt2701_ecc_regs[] = {
+	[ECC_ENCPAR00] =        0x10,
+	[ECC_ENCIRQ_EN] =       0x80,
+	[ECC_ENCIRQ_STA] =      0x84,
+	[ECC_DECDONE] =         0x124,
+	[ECC_DECIRQ_EN] =       0x200,
+	[ECC_DECIRQ_STA] =      0x204,
+};
+
+static int mt2712_ecc_regs[] = {
+	[ECC_ENCPAR00] =        0x300,
+	[ECC_ENCIRQ_EN] =       0x80,
+	[ECC_ENCIRQ_STA] =      0x84,
+	[ECC_DECDONE] =         0x124,
+	[ECC_DECIRQ_EN] =       0x200,
+	[ECC_DECIRQ_STA] =      0x204,
+};
+
+static int mt7622_ecc_regs[] = {
+	[ECC_ENCPAR00] =        0x10,
+	[ECC_ENCIRQ_EN] =       0x30,
+	[ECC_ENCIRQ_STA] =      0x34,
+	[ECC_DECDONE] =         0x11c,
+	[ECC_DECIRQ_EN] =       0x140,
+	[ECC_DECIRQ_STA] =      0x144,
+};
+
+static inline void mtk_ecc_wait_idle(struct mtk_ecc *ecc,
+				     enum mtk_ecc_operation op)
+{
+	struct device *dev = ecc->dev;
+	u32 val;
+	int ret;
+
+	ret = readl_poll_timeout_atomic(ecc->regs + ECC_IDLE_REG(op), val,
+					val & ECC_IDLE_MASK,
+					10, ECC_TIMEOUT);
+	if (ret)
+		dev_warn(dev, "%s NOT idle\n",
+			 op == ECC_ENCODE ? "encoder" : "decoder");
+}
+
+static irqreturn_t mtk_ecc_irq(int irq, void *id)
+{
+	struct mtk_ecc *ecc = id;
+	u32 dec, enc;
+
+	dec = readw(ecc->regs + ecc->caps->ecc_regs[ECC_DECIRQ_STA])
+		    & ECC_IRQ_EN;
+	if (dec) {
+		dec = readw(ecc->regs + ecc->caps->ecc_regs[ECC_DECDONE]);
+		if (dec & ecc->sectors) {
+			/*
+			 * Clear decode IRQ status once again to ensure that
+			 * there will be no extra IRQ.
+			 */
+			readw(ecc->regs + ecc->caps->ecc_regs[ECC_DECIRQ_STA]);
+			ecc->sectors = 0;
+			complete(&ecc->done);
+		} else {
+			return IRQ_HANDLED;
+		}
+	} else {
+		enc = readl(ecc->regs + ecc->caps->ecc_regs[ECC_ENCIRQ_STA])
+		      & ECC_IRQ_EN;
+		if (enc)
+			complete(&ecc->done);
+		else
+			return IRQ_NONE;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int mtk_ecc_config(struct mtk_ecc *ecc, struct mtk_ecc_config *config)
+{
+	u32 ecc_bit, dec_sz, enc_sz;
+	u32 reg, i;
+
+	for (i = 0; i < ecc->caps->num_ecc_strength; i++) {
+		if (ecc->caps->ecc_strength[i] == config->strength)
+			break;
+	}
+
+	if (i == ecc->caps->num_ecc_strength) {
+		dev_err(ecc->dev, "invalid ecc strength %d\n",
+			config->strength);
+		return -EINVAL;
+	}
+
+	ecc_bit = i;
+
+	if (config->op == ECC_ENCODE) {
+		/* configure ECC encoder (in bits) */
+		enc_sz = config->len << 3;
+
+		reg = ecc_bit | (config->mode << ecc->caps->ecc_mode_shift);
+		reg |= (enc_sz << ECC_MS_SHIFT);
+		writel(reg, ecc->regs + ECC_ENCCNFG);
+
+		if (config->mode != ECC_NFI_MODE)
+			writel(lower_32_bits(config->addr),
+			       ecc->regs + ECC_ENCDIADDR);
+
+	} else {
+		/* configure ECC decoder (in bits) */
+		dec_sz = (config->len << 3) +
+			 config->strength * ecc->caps->parity_bits;
+
+		reg = ecc_bit | (config->mode << ecc->caps->ecc_mode_shift);
+		reg |= (dec_sz << ECC_MS_SHIFT) | DEC_CNFG_CORRECT;
+		reg |= DEC_EMPTY_EN;
+		writel(reg, ecc->regs + ECC_DECCNFG);
+
+		if (config->sectors)
+			ecc->sectors = 1 << (config->sectors - 1);
+	}
+
+	return 0;
+}
+
+void mtk_ecc_get_stats(struct mtk_ecc *ecc, struct mtk_ecc_stats *stats,
+		       int sectors)
+{
+	u32 offset, i, err;
+	u32 bitflips = 0;
+
+	stats->corrected = 0;
+	stats->failed = 0;
+
+	for (i = 0; i < sectors; i++) {
+		offset = (i >> 2) << 2;
+		err = readl(ecc->regs + ECC_DECENUM0 + offset);
+		err = err >> ((i % 4) * ecc->caps->err_shift);
+		err &= ecc->caps->err_mask;
+		if (err == ecc->caps->err_mask) {
+			/* uncorrectable errors */
+			stats->failed++;
+			continue;
+		}
+
+		stats->corrected += err;
+		bitflips = max_t(u32, bitflips, err);
+	}
+
+	stats->bitflips = bitflips;
+}
+EXPORT_SYMBOL(mtk_ecc_get_stats);
+
+void mtk_ecc_release(struct mtk_ecc *ecc)
+{
+	clk_disable_unprepare(ecc->clk);
+	put_device(ecc->dev);
+}
+EXPORT_SYMBOL(mtk_ecc_release);
+
+static void mtk_ecc_hw_init(struct mtk_ecc *ecc)
+{
+	mtk_ecc_wait_idle(ecc, ECC_ENCODE);
+	writew(ECC_OP_DISABLE, ecc->regs + ECC_ENCCON);
+
+	mtk_ecc_wait_idle(ecc, ECC_DECODE);
+	writel(ECC_OP_DISABLE, ecc->regs + ECC_DECCON);
+}
+
+static struct mtk_ecc *mtk_ecc_get(struct device_node *np)
+{
+	struct platform_device *pdev;
+	struct mtk_ecc *ecc;
+
+	pdev = of_find_device_by_node(np);
+	if (!pdev)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	ecc = platform_get_drvdata(pdev);
+	if (!ecc) {
+		put_device(&pdev->dev);
+		return ERR_PTR(-EPROBE_DEFER);
+	}
+
+	clk_prepare_enable(ecc->clk);
+	mtk_ecc_hw_init(ecc);
+
+	return ecc;
+}
+
+struct mtk_ecc *of_mtk_ecc_get(struct device_node *of_node)
+{
+	struct mtk_ecc *ecc = NULL;
+	struct device_node *np;
+
+	np = of_parse_phandle(of_node, "nand-ecc-engine", 0);
+	/* for backward compatibility */
+	if (!np)
+		np = of_parse_phandle(of_node, "ecc-engine", 0);
+	if (np) {
+		ecc = mtk_ecc_get(np);
+		of_node_put(np);
+	}
+
+	return ecc;
+}
+EXPORT_SYMBOL(of_mtk_ecc_get);
+
+int mtk_ecc_enable(struct mtk_ecc *ecc, struct mtk_ecc_config *config)
+{
+	enum mtk_ecc_operation op = config->op;
+	u16 reg_val;
+	int ret;
+
+	ret = mutex_lock_interruptible(&ecc->lock);
+	if (ret) {
+		dev_err(ecc->dev, "interrupted when attempting to lock\n");
+		return ret;
+	}
+
+	mtk_ecc_wait_idle(ecc, op);
+
+	ret = mtk_ecc_config(ecc, config);
+	if (ret) {
+		mutex_unlock(&ecc->lock);
+		return ret;
+	}
+
+	if (config->mode != ECC_NFI_MODE || op != ECC_ENCODE) {
+		init_completion(&ecc->done);
+		reg_val = ECC_IRQ_EN;
+		/*
+		 * For ECC_NFI_MODE, if ecc->caps->pg_irq_sel is 1, then it
+		 * means this chip can only generate one ecc irq during page
+		 * read / write. If is 0, generate one ecc irq each ecc step.
+		 */
+		if (ecc->caps->pg_irq_sel && config->mode == ECC_NFI_MODE)
+			reg_val |= ECC_PG_IRQ_SEL;
+		if (op == ECC_ENCODE)
+			writew(reg_val, ecc->regs +
+			       ecc->caps->ecc_regs[ECC_ENCIRQ_EN]);
+		else
+			writew(reg_val, ecc->regs +
+			       ecc->caps->ecc_regs[ECC_DECIRQ_EN]);
+	}
+
+	writew(ECC_OP_ENABLE, ecc->regs + ECC_CTL_REG(op));
+
+	return 0;
+}
+EXPORT_SYMBOL(mtk_ecc_enable);
+
+void mtk_ecc_disable(struct mtk_ecc *ecc)
+{
+	enum mtk_ecc_operation op = ECC_ENCODE;
+
+	/* find out the running operation */
+	if (readw(ecc->regs + ECC_CTL_REG(op)) != ECC_OP_ENABLE)
+		op = ECC_DECODE;
+
+	/* disable it */
+	mtk_ecc_wait_idle(ecc, op);
+	if (op == ECC_DECODE) {
+		/*
+		 * Clear decode IRQ status in case there is a timeout to wait
+		 * decode IRQ.
+		 */
+		readw(ecc->regs + ecc->caps->ecc_regs[ECC_DECDONE]);
+		writew(0, ecc->regs + ecc->caps->ecc_regs[ECC_DECIRQ_EN]);
+	} else {
+		writew(0, ecc->regs + ecc->caps->ecc_regs[ECC_ENCIRQ_EN]);
+	}
+
+	writew(ECC_OP_DISABLE, ecc->regs + ECC_CTL_REG(op));
+
+	mutex_unlock(&ecc->lock);
+}
+EXPORT_SYMBOL(mtk_ecc_disable);
+
+int mtk_ecc_wait_done(struct mtk_ecc *ecc, enum mtk_ecc_operation op)
+{
+	int ret;
+
+	ret = wait_for_completion_timeout(&ecc->done, msecs_to_jiffies(500));
+	if (!ret) {
+		dev_err(ecc->dev, "%s timeout - interrupt did not arrive)\n",
+			(op == ECC_ENCODE) ? "encoder" : "decoder");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(mtk_ecc_wait_done);
+
+int mtk_ecc_encode(struct mtk_ecc *ecc, struct mtk_ecc_config *config,
+		   u8 *data, u32 bytes)
+{
+	dma_addr_t addr;
+	u32 len;
+	int ret;
+
+	addr = dma_map_single(ecc->dev, data, bytes, DMA_TO_DEVICE);
+	ret = dma_mapping_error(ecc->dev, addr);
+	if (ret) {
+		dev_err(ecc->dev, "dma mapping error\n");
+		return -EINVAL;
+	}
+
+	config->op = ECC_ENCODE;
+	config->addr = addr;
+	ret = mtk_ecc_enable(ecc, config);
+	if (ret) {
+		dma_unmap_single(ecc->dev, addr, bytes, DMA_TO_DEVICE);
+		return ret;
+	}
+
+	ret = mtk_ecc_wait_done(ecc, ECC_ENCODE);
+	if (ret)
+		goto timeout;
+
+	mtk_ecc_wait_idle(ecc, ECC_ENCODE);
+
+	/* Program ECC bytes to OOB: per sector oob = FDM + ECC + SPARE */
+	len = (config->strength * ecc->caps->parity_bits + 7) >> 3;
+
+	/* write the parity bytes generated by the ECC back to temp buffer */
+	__ioread32_copy(ecc->eccdata,
+			ecc->regs + ecc->caps->ecc_regs[ECC_ENCPAR00],
+			round_up(len, 4));
+
+	/* copy into possibly unaligned OOB region with actual length */
+	memcpy(data + bytes, ecc->eccdata, len);
+timeout:
+
+	dma_unmap_single(ecc->dev, addr, bytes, DMA_TO_DEVICE);
+	mtk_ecc_disable(ecc);
+
+	return ret;
+}
+EXPORT_SYMBOL(mtk_ecc_encode);
+
+void mtk_ecc_adjust_strength(struct mtk_ecc *ecc, u32 *p)
+{
+	const u8 *ecc_strength = ecc->caps->ecc_strength;
+	int i;
+
+	for (i = 0; i < ecc->caps->num_ecc_strength; i++) {
+		if (*p <= ecc_strength[i]) {
+			if (!i)
+				*p = ecc_strength[i];
+			else if (*p != ecc_strength[i])
+				*p = ecc_strength[i - 1];
+			return;
+		}
+	}
+
+	*p = ecc_strength[ecc->caps->num_ecc_strength - 1];
+}
+EXPORT_SYMBOL(mtk_ecc_adjust_strength);
+
+unsigned int mtk_ecc_get_parity_bits(struct mtk_ecc *ecc)
+{
+	return ecc->caps->parity_bits;
+}
+EXPORT_SYMBOL(mtk_ecc_get_parity_bits);
+
+static const struct mtk_ecc_caps mtk_ecc_caps_mt2701 = {
+	.err_mask = 0x3f,
+	.err_shift = 8,
+	.ecc_strength = ecc_strength_mt2701,
+	.ecc_regs = mt2701_ecc_regs,
+	.num_ecc_strength = 20,
+	.ecc_mode_shift = 5,
+	.parity_bits = 14,
+	.pg_irq_sel = 0,
+};
+
+static const struct mtk_ecc_caps mtk_ecc_caps_mt2712 = {
+	.err_mask = 0x7f,
+	.err_shift = 8,
+	.ecc_strength = ecc_strength_mt2712,
+	.ecc_regs = mt2712_ecc_regs,
+	.num_ecc_strength = 23,
+	.ecc_mode_shift = 5,
+	.parity_bits = 14,
+	.pg_irq_sel = 1,
+};
+
+static const struct mtk_ecc_caps mtk_ecc_caps_mt7622 = {
+	.err_mask = 0x1f,
+	.err_shift = 5,
+	.ecc_strength = ecc_strength_mt7622,
+	.ecc_regs = mt7622_ecc_regs,
+	.num_ecc_strength = 5,
+	.ecc_mode_shift = 4,
+	.parity_bits = 13,
+	.pg_irq_sel = 0,
+};
+
+static const struct of_device_id mtk_ecc_dt_match[] = {
+	{
+		.compatible = "mediatek,mt2701-ecc",
+		.data = &mtk_ecc_caps_mt2701,
+	}, {
+		.compatible = "mediatek,mt2712-ecc",
+		.data = &mtk_ecc_caps_mt2712,
+	}, {
+		.compatible = "mediatek,mt7622-ecc",
+		.data = &mtk_ecc_caps_mt7622,
+	},
+	{},
+};
+
+static int mtk_ecc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mtk_ecc *ecc;
+	u32 max_eccdata_size;
+	int irq, ret;
+
+	ecc = devm_kzalloc(dev, sizeof(*ecc), GFP_KERNEL);
+	if (!ecc)
+		return -ENOMEM;
+
+	ecc->caps = of_device_get_match_data(dev);
+
+	max_eccdata_size = ecc->caps->num_ecc_strength - 1;
+	max_eccdata_size = ecc->caps->ecc_strength[max_eccdata_size];
+	max_eccdata_size = (max_eccdata_size * ecc->caps->parity_bits + 7) >> 3;
+	max_eccdata_size = round_up(max_eccdata_size, 4);
+	ecc->eccdata = devm_kzalloc(dev, max_eccdata_size, GFP_KERNEL);
+	if (!ecc->eccdata)
+		return -ENOMEM;
+
+	ecc->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(ecc->regs))
+		return PTR_ERR(ecc->regs);
+
+	ecc->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(ecc->clk)) {
+		dev_err(dev, "failed to get clock: %ld\n", PTR_ERR(ecc->clk));
+		return PTR_ERR(ecc->clk);
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	ret = dma_set_mask(dev, DMA_BIT_MASK(32));
+	if (ret) {
+		dev_err(dev, "failed to set DMA mask\n");
+		return ret;
+	}
+
+	ret = devm_request_irq(dev, irq, mtk_ecc_irq, 0x0, "mtk-ecc", ecc);
+	if (ret) {
+		dev_err(dev, "failed to request irq\n");
+		return -EINVAL;
+	}
+
+	ecc->dev = dev;
+	mutex_init(&ecc->lock);
+	platform_set_drvdata(pdev, ecc);
+	dev_info(dev, "probed\n");
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mtk_ecc_suspend(struct device *dev)
+{
+	struct mtk_ecc *ecc = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(ecc->clk);
+
+	return 0;
+}
+
+static int mtk_ecc_resume(struct device *dev)
+{
+	struct mtk_ecc *ecc = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare_enable(ecc->clk);
+	if (ret) {
+		dev_err(dev, "failed to enable clk\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(mtk_ecc_pm_ops, mtk_ecc_suspend, mtk_ecc_resume);
+#endif
+
+MODULE_DEVICE_TABLE(of, mtk_ecc_dt_match);
+
+static struct platform_driver mtk_ecc_driver = {
+	.probe  = mtk_ecc_probe,
+	.driver = {
+		.name  = "mtk-ecc",
+		.of_match_table = mtk_ecc_dt_match,
+#ifdef CONFIG_PM_SLEEP
+		.pm = &mtk_ecc_pm_ops,
+#endif
+	},
+};
+
+module_platform_driver(mtk_ecc_driver);
+
+MODULE_AUTHOR("Xiaolei Li <xiaolei.li@mediatek.com>");
+MODULE_DESCRIPTION("MTK Nand ECC Driver");
+MODULE_LICENSE("Dual MIT/GPL");