Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 222 insertions, 0 deletions

diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig
new file mode 100644
index 000000000..b20e0c38b
--- /dev/null
+++ b/drivers/mtd/parsers/Kconfig
@@ -0,0 +1,222 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config MTD_AR7_PARTS
+	tristate "TI AR7 partitioning parser"
+	help
+	  TI AR7 partitioning parser support
+
+config MTD_BCM47XX_PARTS
+	tristate "BCM47XX partitioning parser"
+	depends on BCM47XX || ARCH_BCM_5301X
+	help
+	  This provides partitions parser for devices based on BCM47xx
+	  boards.
+
+config MTD_BCM63XX_PARTS
+	bool "BCM63XX CFE partitioning parser"
+	depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST
+	select CRC32
+	select MTD_PARSER_IMAGETAG
+	help
+	  This provides partition parsing for BCM63xx devices with CFE
+	  bootloaders.
+
+config MTD_BRCM_U_BOOT
+	tristate "Broadcom's U-Boot partition parser"
+	depends on ARCH_BCMBCA || COMPILE_TEST
+	help
+	  Broadcom uses a custom way of storing U-Boot environment variables.
+	  They are placed inside U-Boot partition itself at unspecified offset.
+	  It's possible to locate them by looking for a custom header with a
+	  magic value. This driver does that and creates subpartitions for
+	  each found environment variables block.
+
+config MTD_CMDLINE_PARTS
+	tristate "Command line partition table parsing"
+	depends on MTD
+	help
+	  Allow generic configuration of the MTD partition tables via the kernel
+	  command line. Multiple flash resources are supported for hardware where
+	  different kinds of flash memory are available.
+
+	  You will still need the parsing functions to be called by the driver
+	  for your particular device. It won't happen automatically. The
+	  SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for
+	  example.
+
+	  The format for the command line is as follows:
+
+	  mtdparts=<mtddef>[;<mtddef]
+	  <mtddef>  := <mtd-id>:<partdef>[,<partdef>]
+	  <partdef> := <size>[@offset][<name>][ro]
+	  <mtd-id>  := unique id used in mapping driver/device
+	  <size>    := standard linux memsize OR "-" to denote all
+	  remaining space
+	  <name>    := (NAME)
+
+	  Due to the way Linux handles the command line, no spaces are
+	  allowed in the partition definition, including mtd id's and partition
+	  names.
+
+	  Examples:
+
+	  1 flash resource (mtd-id "sa1100"), with 1 single writable partition:
+	  mtdparts=sa1100:-
+
+	  Same flash, but 2 named partitions, the first one being read-only:
+	  mtdparts=sa1100:256k(ARMboot)ro,-(root)
+
+	  If unsure, say 'N'.
+
+config MTD_OF_PARTS
+	tristate "OpenFirmware (device tree) partitioning parser"
+	default y
+	depends on OF
+	help
+	  This provides a open firmware device tree partition parser
+	  which derives the partition map from the children of the
+	  flash memory node, as described in
+	  Documentation/devicetree/bindings/mtd/mtd.yaml.
+
+config MTD_OF_PARTS_BCM4908
+	bool "BCM4908 partitioning support"
+	depends on MTD_OF_PARTS && (ARCH_BCMBCA || COMPILE_TEST)
+	default ARCH_BCMBCA
+	help
+	  This provides partitions parser for BCM4908 family devices
+	  that can have multiple "firmware" partitions. It takes care of
+	  finding currently used one and backup ones.
+
+config MTD_OF_PARTS_LINKSYS_NS
+	bool "Linksys Northstar partitioning support"
+	depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCMBCA || COMPILE_TEST)
+	default ARCH_BCM_5301X
+	help
+	  This provides partitions parser for Linksys devices based on Broadcom
+	  Northstar architecture. Linksys commonly uses fixed flash layout with
+	  two "firmware" partitions. Currently used firmware has to be detected
+	  using CFE environment variable.
+
+config MTD_PARSER_IMAGETAG
+	tristate "Parser for BCM963XX Image Tag format partitions"
+	depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST
+	select CRC32
+	help
+	  Image Tag is the firmware header used by broadcom on their xDSL line
+	  of devices. It is used to describe the offsets and lengths of kernel
+	  and rootfs partitions.
+	  This driver adds support for parsing a partition with an Image Tag
+	  header and creates up to two partitions, kernel and rootfs.
+
+config MTD_AFS_PARTS
+	tristate "ARM Firmware Suite partition parsing"
+	depends on (ARM || ARM64)
+	help
+	  The ARM Firmware Suite allows the user to divide flash devices into
+	  multiple 'images'. Each such image has a header containing its name
+	  and offset/size etc.
+
+	  If you need code which can detect and parse these tables, and
+	  register MTD 'partitions' corresponding to each image detected,
+	  enable this option.
+
+	  You will still need the parsing functions to be called by the driver
+	  for your particular device. It won't happen automatically. The
+	  'physmap' map driver (CONFIG_MTD_PHYSMAP) does this, for example.
+
+config MTD_PARSER_TPLINK_SAFELOADER
+	tristate "TP-Link Safeloader partitions parser"
+	depends on MTD && (ARCH_BCM_5301X || ATH79 || SOC_MT7620 || SOC_MT7621 || COMPILE_TEST)
+	help
+	  TP-Link home routers use flash partitions to store various data. Info
+	  about flash space layout is stored in a partitions table using a
+	  custom ASCII-based format.
+
+	  That format was first found in devices with SafeLoader bootloader and
+	  was named after it. Later it was adapted to CFE and U-Boot
+	  bootloaders.
+
+	  This driver reads partitions table, parses it and creates MTD
+	  partitions.
+
+config MTD_PARSER_TRX
+	tristate "Parser for TRX format partitions"
+	depends on MTD && (BCM47XX || ARCH_BCM_5301X || ARCH_MEDIATEK || RALINK || COMPILE_TEST)
+	help
+	  TRX is a firmware format used by Broadcom on their devices. It
+	  may contain up to 3/4 partitions (depending on the version).
+	  This driver will parse TRX header and report at least two partitions:
+	  kernel and rootfs.
+
+config MTD_SHARPSL_PARTS
+	tristate "Sharp SL Series NAND flash partition parser"
+	depends on MTD_NAND_SHARPSL || MTD_NAND_TMIO || COMPILE_TEST
+	help
+	  This provides the read-only FTL logic necessary to read the partition
+	  table from the NAND flash of Sharp SL Series (Zaurus) and the MTD
+	  partition parser using this code.
+
+config MTD_REDBOOT_PARTS
+	tristate "RedBoot partition table parsing"
+	help
+	  RedBoot is a ROM monitor and bootloader which deals with multiple
+	  'images' in flash devices by putting a table one of the erase
+	  blocks on the device, similar to a partition table, which gives
+	  the offsets, lengths and names of all the images stored in the
+	  flash.
+
+	  If you need code which can detect and parse this table, and register
+	  MTD 'partitions' corresponding to each image in the table, enable
+	  this option.
+
+	  You will still need the parsing functions to be called by the driver
+	  for your particular device. It won't happen automatically. The
+	  SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for
+	  example.
+
+if MTD_REDBOOT_PARTS
+
+config MTD_REDBOOT_DIRECTORY_BLOCK
+	int "Location of RedBoot partition table"
+	default "-1"
+	help
+	  This option is the Linux counterpart to the
+	  CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK RedBoot compile time
+	  option.
+
+	  The option specifies which Flash sectors holds the RedBoot
+	  partition table.  A zero or positive value gives an absolute
+	  erase block number. A negative value specifies a number of
+	  sectors before the end of the device.
+
+	  For example "2" means block number 2, "-1" means the last
+	  block and "-2" means the penultimate block.
+
+config MTD_REDBOOT_PARTS_UNALLOCATED
+	bool "Include unallocated flash regions"
+	help
+	  If you need to register each unallocated flash region as a MTD
+	  'partition', enable this option.
+
+config MTD_REDBOOT_PARTS_READONLY
+	bool "Force read-only for RedBoot system images"
+	help
+	  If you need to force read-only for 'RedBoot', 'RedBoot Config' and
+	  'FIS directory' images, enable this option.
+
+endif # MTD_REDBOOT_PARTS
+
+config MTD_QCOMSMEM_PARTS
+	tristate "Qualcomm SMEM flash partition parser"
+	depends on QCOM_SMEM
+	help
+	  This provides support for parsing partitions from Shared Memory (SMEM)
+	  for NAND and SPI flash on Qualcomm platforms.
+
+config MTD_SERCOMM_PARTS
+	tristate "Sercomm partition table parser"
+	depends on MTD && RALINK
+	help
+	  This provides partitions table parser for devices with Sercomm
+	  partition map. This partition table contains real partition
+	  offsets, which may differ from device to device depending on the
+	  number and location of bad blocks on NAND.