Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 622 insertions, 0 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
new file mode 100644
index 000000000..c34bd432d
--- /dev/null
+++ b/drivers/net/Kconfig
@@ -0,0 +1,622 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Network device configuration
+#
+
+menuconfig NETDEVICES
+	default y if UML
+	depends on NET
+	bool "Network device support"
+	help
+	  You can say N here if you don't intend to connect your Linux box to
+	  any other computer at all.
+
+	  You'll have to say Y if your computer contains a network card that
+	  you want to use under Linux. If you are going to run SLIP or PPP over
+	  telephone line or null modem cable you need say Y here. Connecting
+	  two machines with parallel ports using PLIP needs this, as well as
+	  AX.25/KISS for sending Internet traffic over amateur radio links.
+
+	  See also "The Linux Network Administrator's Guide" by Olaf Kirch and
+	  Terry Dawson. Available at <http://www.tldp.org/guides.html>.
+
+	  If unsure, say Y.
+
+# All the following symbols are dependent on NETDEVICES - do not repeat
+# that for each of the symbols.
+if NETDEVICES
+
+config MII
+	tristate
+
+config NET_CORE
+	default y
+	bool "Network core driver support"
+	help
+	  You can say N here if you do not intend to use any of the
+	  networking core drivers (i.e. VLAN, bridging, bonding, etc.)
+
+if NET_CORE
+
+config BONDING
+	tristate "Bonding driver support"
+	depends on INET
+	depends on IPV6 || IPV6=n
+	depends on TLS || TLS_DEVICE=n
+	help
+	  Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
+	  Channels together. This is called 'Etherchannel' by Cisco,
+	  'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux.
+
+	  The driver supports multiple bonding modes to allow for both high
+	  performance and high availability operation.
+
+	  Refer to <file:Documentation/networking/bonding.rst> for more
+	  information.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called bonding.
+
+config DUMMY
+	tristate "Dummy net driver support"
+	help
+	  This is essentially a bit-bucket device (i.e. traffic you send to
+	  this device is consigned into oblivion) with a configurable IP
+	  address. It is most commonly used in order to make your currently
+	  inactive SLIP address seem like a real address for local programs.
+	  If you use SLIP or PPP, you might want to say Y here. It won't
+	  enlarge your kernel. What a deal. Read about it in the Network
+	  Administrator's Guide, available from
+	  <http://www.tldp.org/docs.html#guide>.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called dummy.
+
+config WIREGUARD
+	tristate "WireGuard secure network tunnel"
+	depends on NET && INET
+	depends on IPV6 || !IPV6
+	depends on !KMSAN # KMSAN doesn't support the crypto configs below
+	select NET_UDP_TUNNEL
+	select DST_CACHE
+	select CRYPTO
+	select CRYPTO_LIB_CURVE25519
+	select CRYPTO_LIB_CHACHA20POLY1305
+	select CRYPTO_CHACHA20_X86_64 if X86 && 64BIT
+	select CRYPTO_POLY1305_X86_64 if X86 && 64BIT
+	select CRYPTO_BLAKE2S_X86 if X86 && 64BIT
+	select CRYPTO_CURVE25519_X86 if X86 && 64BIT
+	select CRYPTO_CHACHA20_NEON if ARM || (ARM64 && KERNEL_MODE_NEON)
+	select CRYPTO_POLY1305_NEON if ARM64 && KERNEL_MODE_NEON
+	select CRYPTO_POLY1305_ARM if ARM
+	select CRYPTO_BLAKE2S_ARM if ARM
+	select CRYPTO_CURVE25519_NEON if ARM && KERNEL_MODE_NEON
+	select CRYPTO_CHACHA_MIPS if CPU_MIPS32_R2
+	select CRYPTO_POLY1305_MIPS if MIPS
+	select CRYPTO_CHACHA_S390 if S390
+	help
+	  WireGuard is a secure, fast, and easy to use replacement for IPSec
+	  that uses modern cryptography and clever networking tricks. It's
+	  designed to be fairly general purpose and abstract enough to fit most
+	  use cases, while at the same time remaining extremely simple to
+	  configure. See www.wireguard.com for more info.
+
+	  It's safe to say Y or M here, as the driver is very lightweight and
+	  is only in use when an administrator chooses to add an interface.
+
+config WIREGUARD_DEBUG
+	bool "Debugging checks and verbose messages"
+	depends on WIREGUARD
+	help
+	  This will write log messages for handshake and other events
+	  that occur for a WireGuard interface. It will also perform some
+	  extra validation checks and unit tests at various points. This is
+	  only useful for debugging.
+
+	  Say N here unless you know what you're doing.
+
+config EQUALIZER
+	tristate "EQL (serial line load balancing) support"
+	help
+	  If you have two serial connections to some other computer (this
+	  usually requires two modems and two telephone lines) and you use
+	  SLIP (the protocol for sending Internet traffic over telephone
+	  lines) or PPP (a better SLIP) on them, you can make them behave like
+	  one double speed connection using this driver.  Naturally, this has
+	  to be supported at the other end as well, either with a similar EQL
+	  Linux driver or with a Livingston Portmaster 2e.
+
+	  Say Y if you want this and read
+	  <file:Documentation/networking/eql.rst>.  You may also want to read
+	  section 6.2 of the NET-3-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called eql.  If unsure, say N.
+
+config NET_FC
+	bool "Fibre Channel driver support"
+	depends on SCSI && PCI
+	help
+	  Fibre Channel is a high speed serial protocol mainly used to connect
+	  large storage devices to the computer; it is compatible with and
+	  intended to replace SCSI.
+
+	  If you intend to use Fibre Channel, you need to have a Fibre channel
+	  adaptor card in your computer; say Y here and to the driver for your
+	  adaptor below. You also should have said Y to "SCSI support" and
+	  "SCSI generic support".
+
+config IFB
+	tristate "Intermediate Functional Block support"
+	depends on NET_ACT_MIRRED || NFT_FWD_NETDEV
+	select NET_REDIRECT
+	help
+	  This is an intermediate driver that allows sharing of
+	  resources.
+	  To compile this driver as a module, choose M here: the module
+	  will be called ifb.  If you want to use more than one ifb
+	  device at a time, you need to compile this driver as a module.
+	  Instead of 'ifb', the devices will then be called 'ifb0',
+	  'ifb1' etc.
+	  Look at the iproute2 documentation directory for usage etc
+
+source "drivers/net/team/Kconfig"
+
+config MACVLAN
+	tristate "MAC-VLAN support"
+	help
+	  This allows one to create virtual interfaces that map packets to
+	  or from specific MAC addresses to a particular interface.
+
+	  Macvlan devices can be added using the "ip" command from the
+	  iproute2 package starting with the iproute2-2.6.23 release:
+
+	  "ip link add link <real dev> [ address MAC ] [ NAME ] type macvlan"
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called macvlan.
+
+config MACVTAP
+	tristate "MAC-VLAN based tap driver"
+	depends on MACVLAN
+	depends on INET
+	select TAP
+	help
+	  This adds a specialized tap character device driver that is based
+	  on the MAC-VLAN network interface, called macvtap. A macvtap device
+	  can be added in the same way as a macvlan device, using 'type
+	  macvtap', and then be accessed through the tap user space interface.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called macvtap.
+
+config IPVLAN_L3S
+	depends on NETFILTER
+	depends on IPVLAN
+	def_bool y
+	select NET_L3_MASTER_DEV
+
+config IPVLAN
+	tristate "IP-VLAN support"
+	depends on INET
+	depends on IPV6 || !IPV6
+	help
+	  This allows one to create virtual devices off of a main interface
+	  and packets will be delivered based on the dest L3 (IPv6/IPv4 addr)
+	  on packets. All interfaces (including the main interface) share L2
+	  making it transparent to the connected L2 switch.
+
+	  Ipvlan devices can be added using the "ip" command from the
+	  iproute2 package starting with the iproute2-3.19 release:
+
+	  "ip link add link <main-dev> [ NAME ] type ipvlan"
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ipvlan.
+
+config IPVTAP
+	tristate "IP-VLAN based tap driver"
+	depends on IPVLAN
+	depends on INET
+	select TAP
+	help
+	  This adds a specialized tap character device driver that is based
+	  on the IP-VLAN network interface, called ipvtap. An ipvtap device
+	  can be added in the same way as a ipvlan device, using 'type
+	  ipvtap', and then be accessed through the tap user space interface.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ipvtap.
+
+config VXLAN
+	tristate "Virtual eXtensible Local Area Network (VXLAN)"
+	depends on INET
+	select NET_UDP_TUNNEL
+	select GRO_CELLS
+	help
+	  This allows one to create vxlan virtual interfaces that provide
+	  Layer 2 Networks over Layer 3 Networks. VXLAN is often used
+	  to tunnel virtual network infrastructure in virtualized environments.
+	  For more information see:
+	    http://tools.ietf.org/html/draft-mahalingam-dutt-dcops-vxlan-02
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called vxlan.
+
+config GENEVE
+	tristate "Generic Network Virtualization Encapsulation"
+	depends on INET
+	depends on IPV6 || !IPV6
+	select NET_UDP_TUNNEL
+	select GRO_CELLS
+	help
+	  This allows one to create geneve virtual interfaces that provide
+	  Layer 2 Networks over Layer 3 Networks. GENEVE is often used
+	  to tunnel virtual network infrastructure in virtualized environments.
+	  For more information see:
+	    http://tools.ietf.org/html/draft-gross-geneve-02
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called geneve.
+
+config BAREUDP
+	tristate "Bare UDP Encapsulation"
+	depends on INET
+	depends on IPV6 || !IPV6
+	select NET_UDP_TUNNEL
+	select GRO_CELLS
+	help
+	  This adds a bare UDP tunnel module for tunnelling different
+	  kinds of traffic like MPLS, IP, etc. inside a UDP tunnel.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called bareudp.
+
+config GTP
+	tristate "GPRS Tunneling Protocol datapath (GTP-U)"
+	depends on INET
+	select NET_UDP_TUNNEL
+	help
+	  This allows one to create gtp virtual interfaces that provide
+	  the GPRS Tunneling Protocol datapath (GTP-U). This tunneling protocol
+	  is used to prevent subscribers from accessing mobile carrier core
+	  network infrastructure. This driver requires a userspace software that
+	  implements the signaling protocol (GTP-C) to update its PDP context
+	  base, such as OpenGGSN <http://git.osmocom.org/openggsn/). This
+	  tunneling protocol is implemented according to the GSM TS 09.60 and
+	  3GPP TS 29.060 standards.
+
+	  To compile this drivers as a module, choose M here: the module
+	  will be called gtp.
+
+config AMT
+	tristate "Automatic Multicast Tunneling (AMT)"
+	depends on INET && IP_MULTICAST
+	depends on IPV6 || !IPV6
+	select NET_UDP_TUNNEL
+	help
+	  This allows one to create AMT(Automatic Multicast Tunneling)
+	  virtual interfaces that provide multicast tunneling.
+	  There are two roles, Gateway, and Relay.
+	  Gateway Encapsulates IGMP/MLD traffic from listeners to the Relay.
+	  Gateway Decapsulates multicast traffic from the Relay to Listeners.
+	  Relay Encapsulates multicast traffic from Sources to Gateway.
+	  Relay Decapsulates IGMP/MLD traffic from Gateway.
+
+	  To compile this drivers as a module, choose M here: the module
+	  will be called amt.
+
+config MACSEC
+	tristate "IEEE 802.1AE MAC-level encryption (MACsec)"
+	select CRYPTO
+	select CRYPTO_AES
+	select CRYPTO_GCM
+	select GRO_CELLS
+	help
+	   MACsec is an encryption standard for Ethernet.
+
+config NETCONSOLE
+	tristate "Network console logging support"
+	help
+	  If you want to log kernel messages over the network, enable this.
+	  See <file:Documentation/networking/netconsole.rst> for details.
+
+config NETCONSOLE_DYNAMIC
+	bool "Dynamic reconfiguration of logging targets"
+	depends on NETCONSOLE && SYSFS && CONFIGFS_FS && \
+			!(NETCONSOLE=y && CONFIGFS_FS=m)
+	help
+	  This option enables the ability to dynamically reconfigure target
+	  parameters (interface, IP addresses, port numbers, MAC addresses)
+	  at runtime through a userspace interface exported using configfs.
+	  See <file:Documentation/networking/netconsole.rst> for details.
+
+config NETPOLL
+	def_bool NETCONSOLE
+
+config NET_POLL_CONTROLLER
+	def_bool NETPOLL
+
+config NTB_NETDEV
+	tristate "Virtual Ethernet over NTB Transport"
+	depends on NTB_TRANSPORT
+
+config RIONET
+	tristate "RapidIO Ethernet over messaging driver support"
+	depends on RAPIDIO
+
+config RIONET_TX_SIZE
+	int "Number of outbound queue entries"
+	depends on RIONET
+	default "128"
+
+config RIONET_RX_SIZE
+	int "Number of inbound queue entries"
+	depends on RIONET
+	default "128"
+
+config TUN
+	tristate "Universal TUN/TAP device driver support"
+	depends on INET
+	select CRC32
+	help
+	  TUN/TAP provides packet reception and transmission for user space
+	  programs.  It can be viewed as a simple Point-to-Point or Ethernet
+	  device, which instead of receiving packets from a physical media,
+	  receives them from user space program and instead of sending packets
+	  via physical media writes them to the user space program.
+
+	  When a program opens /dev/net/tun, driver creates and registers
+	  corresponding net device tunX or tapX.  After a program closed above
+	  devices, driver will automatically delete tunXX or tapXX device and
+	  all routes corresponding to it.
+
+	  Please read <file:Documentation/networking/tuntap.rst> for more
+	  information.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called tun.
+
+	  If you don't know what to use this for, you don't need it.
+
+config TAP
+	tristate
+	help
+	  This option is selected by any driver implementing tap user space
+	  interface for a virtual interface to re-use core tap functionality.
+
+config TUN_VNET_CROSS_LE
+	bool "Support for cross-endian vnet headers on little-endian kernels"
+	default n
+	help
+	  This option allows TUN/TAP and MACVTAP device drivers in a
+	  little-endian kernel to parse vnet headers that come from a
+	  big-endian legacy virtio device.
+
+	  Userspace programs can control the feature using the TUNSETVNETBE
+	  and TUNGETVNETBE ioctls.
+
+	  Unless you have a little-endian system hosting a big-endian virtual
+	  machine with a legacy virtio NIC, you should say N.
+
+config VETH
+	tristate "Virtual ethernet pair device"
+	help
+	  This device is a local ethernet tunnel. Devices are created in pairs.
+	  When one end receives the packet it appears on its pair and vice
+	  versa.
+
+config VIRTIO_NET
+	tristate "Virtio network driver"
+	depends on VIRTIO
+	select NET_FAILOVER
+	help
+	  This is the virtual network driver for virtio.  It can be used with
+	  QEMU based VMMs (like KVM or Xen).  Say Y or M.
+
+config NLMON
+	tristate "Virtual netlink monitoring device"
+	help
+	  This option enables a monitoring net device for netlink skbs. The
+	  purpose of this is to analyze netlink messages with packet sockets.
+	  Thus applications like tcpdump will be able to see local netlink
+	  messages if they tap into the netlink device, record pcaps for further
+	  diagnostics, etc. This is mostly intended for developers or support
+	  to debug netlink issues. If unsure, say N.
+
+config NET_VRF
+	tristate "Virtual Routing and Forwarding (Lite)"
+	depends on IP_MULTIPLE_TABLES
+	depends on NET_L3_MASTER_DEV
+	depends on IPV6 || IPV6=n
+	depends on IPV6_MULTIPLE_TABLES || IPV6=n
+	help
+	  This option enables the support for mapping interfaces into VRF's. The
+	  support enables VRF devices.
+
+config VSOCKMON
+	tristate "Virtual vsock monitoring device"
+	depends on VHOST_VSOCK
+	help
+	  This option enables a monitoring net device for vsock sockets. It is
+	  mostly intended for developers or support to debug vsock issues. If
+	  unsure, say N.
+
+config MHI_NET
+	tristate "MHI network driver"
+	depends on MHI_BUS
+	help
+	  This is the network driver for MHI bus.  It can be used with
+	  QCOM based WWAN modems for IP or QMAP/rmnet protocol (like SDX55).
+	  Say Y or M.
+
+endif # NET_CORE
+
+config SUNGEM_PHY
+	tristate
+
+source "drivers/net/arcnet/Kconfig"
+
+source "drivers/atm/Kconfig"
+
+source "drivers/net/caif/Kconfig"
+
+source "drivers/net/dsa/Kconfig"
+
+source "drivers/net/ethernet/Kconfig"
+
+source "drivers/net/fddi/Kconfig"
+
+source "drivers/net/hippi/Kconfig"
+
+source "drivers/net/ipa/Kconfig"
+
+config NET_SB1000
+	tristate "General Instruments Surfboard 1000"
+	depends on PNP
+	help
+	  This is a driver for the General Instrument (also known as
+	  NextLevel) SURFboard 1000 internal
+	  cable modem. This is an ISA card which is used by a number of cable
+	  TV companies to provide cable modem access. It's a one-way
+	  downstream-only cable modem, meaning that your upstream net link is
+	  provided by your regular phone modem.
+
+	  At present this driver only compiles as a module, so say M here if
+	  you have this card. The module will be called sb1000. Then read
+	  <file:Documentation/networking/device_drivers/cable/sb1000.rst> for
+	  information on how to use this module, as it needs special ppp
+	  scripts for establishing a connection. Further documentation
+	  and the necessary scripts can be found at:
+
+	  <http://www.jacksonville.net/~fventuri/>
+	  <http://home.adelphia.net/~siglercm/sb1000.html>
+	  <http://linuxpower.cx/~cable/>
+
+	  If you don't have this card, of course say N.
+
+source "drivers/net/phy/Kconfig"
+
+source "drivers/net/pse-pd/Kconfig"
+
+source "drivers/net/can/Kconfig"
+
+source "drivers/net/mctp/Kconfig"
+
+source "drivers/net/mdio/Kconfig"
+
+source "drivers/net/pcs/Kconfig"
+
+source "drivers/net/plip/Kconfig"
+
+source "drivers/net/ppp/Kconfig"
+
+source "drivers/net/slip/Kconfig"
+
+source "drivers/s390/net/Kconfig"
+
+source "drivers/net/usb/Kconfig"
+
+source "drivers/net/wireless/Kconfig"
+
+source "drivers/net/wan/Kconfig"
+
+source "drivers/net/ieee802154/Kconfig"
+
+source "drivers/net/wwan/Kconfig"
+
+config XEN_NETDEV_FRONTEND
+	tristate "Xen network device frontend driver"
+	depends on XEN
+	select XEN_XENBUS_FRONTEND
+	select PAGE_POOL
+	default y
+	help
+	  This driver provides support for Xen paravirtual network
+	  devices exported by a Xen network driver domain (often
+	  domain 0).
+
+	  The corresponding Linux backend driver is enabled by the
+	  CONFIG_XEN_NETDEV_BACKEND option.
+
+	  If you are compiling a kernel for use as Xen guest, you
+	  should say Y here. To compile this driver as a module, chose
+	  M here: the module will be called xen-netfront.
+
+config XEN_NETDEV_BACKEND
+	tristate "Xen backend network device"
+	depends on XEN_BACKEND
+	help
+	  This driver allows the kernel to act as a Xen network driver
+	  domain which exports paravirtual network devices to other
+	  Xen domains. These devices can be accessed by any operating
+	  system that implements a compatible front end.
+
+	  The corresponding Linux frontend driver is enabled by the
+	  CONFIG_XEN_NETDEV_FRONTEND configuration option.
+
+	  The backend driver presents a standard network device
+	  endpoint for each paravirtual network device to the driver
+	  domain network stack. These can then be bridged or routed
+	  etc in order to provide full network connectivity.
+
+	  If you are compiling a kernel to run in a Xen network driver
+	  domain (often this is domain 0) you should say Y here. To
+	  compile this driver as a module, chose M here: the module
+	  will be called xen-netback.
+
+config VMXNET3
+	tristate "VMware VMXNET3 ethernet driver"
+	depends on PCI && INET
+	depends on PAGE_SIZE_LESS_THAN_64KB
+	help
+	  This driver supports VMware's vmxnet3 virtual ethernet NIC.
+	  To compile this driver as a module, choose M here: the
+	  module will be called vmxnet3.
+
+config FUJITSU_ES
+	tristate "FUJITSU Extended Socket Network Device driver"
+	depends on ACPI
+	help
+	  This driver provides support for Extended Socket network device
+	  on Extended Partitioning of FUJITSU PRIMEQUEST 2000 E2 series.
+
+source "drivers/net/thunderbolt/Kconfig"
+source "drivers/net/hyperv/Kconfig"
+
+config NETDEVSIM
+	tristate "Simulated networking device"
+	depends on DEBUG_FS
+	depends on INET
+	depends on IPV6 || IPV6=n
+	depends on PSAMPLE || PSAMPLE=n
+	select NET_DEVLINK
+	help
+	  This driver is a developer testing tool and software model that can
+	  be used to test various control path networking APIs, especially
+	  HW-offload related.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called netdevsim.
+
+config NET_FAILOVER
+	tristate "Failover driver"
+	select FAILOVER
+	help
+	  This provides an automated failover mechanism via APIs to create
+	  and destroy a failover master netdev and manages a primary and
+	  standby slave netdevs that get registered via the generic failover
+	  infrastructure. This can be used by paravirtual drivers to enable
+	  an alternate low latency datapath. It also enables live migration of
+	  a VM with direct attached VF by failing over to the paravirtual
+	  datapath when the VF is unplugged.
+
+config NETDEV_LEGACY_INIT
+	bool
+	depends on ISA
+	help
+	  Drivers that call netdev_boot_setup_check() should select this
+	  symbol, everything else no longer needs it.
+
+endif # NETDEVICES