Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 259 insertions, 0 deletions

diff --git a/drivers/net/Space.c b/drivers/net/Space.c
new file mode 100644
index 000000000..83214e2e7
--- /dev/null
+++ b/drivers/net/Space.c
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Holds initial configuration information for devices.
+ *
+ * Version:	@(#)Space.c	1.0.7	08/12/93
+ *
+ * Authors:	Ross Biro
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Donald J. Becker, <becker@scyld.com>
+ *
+ * Changelog:
+ *		Stephen Hemminger (09/2003)
+ *		- get rid of pre-linked dev list, dynamic device allocation
+ *		Paul Gortmaker (03/2002)
+ *		- struct init cleanup, enable multiple ISA autoprobes.
+ *		Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 09/1999
+ *		- fix sbni: s/device/net_device/
+ *		Paul Gortmaker (06/98):
+ *		 - sort probes in a sane way, make sure all (safe) probes
+ *		   get run once & failed autoprobes don't autoprobe again.
+ */
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/netlink.h>
+#include <net/Space.h>
+
+/*
+ * This structure holds boot-time configured netdevice settings. They
+ * are then used in the device probing.
+ */
+struct netdev_boot_setup {
+	char name[IFNAMSIZ];
+	struct ifmap map;
+};
+#define NETDEV_BOOT_SETUP_MAX 8
+
+
+/******************************************************************************
+ *
+ *		      Device Boot-time Settings Routines
+ *
+ ******************************************************************************/
+
+/* Boot time configuration table */
+static struct netdev_boot_setup dev_boot_setup[NETDEV_BOOT_SETUP_MAX];
+
+/**
+ *	netdev_boot_setup_add	- add new setup entry
+ *	@name: name of the device
+ *	@map: configured settings for the device
+ *
+ *	Adds new setup entry to the dev_boot_setup list.  The function
+ *	returns 0 on error and 1 on success.  This is a generic routine to
+ *	all netdevices.
+ */
+static int netdev_boot_setup_add(char *name, struct ifmap *map)
+{
+	struct netdev_boot_setup *s;
+	int i;
+
+	s = dev_boot_setup;
+	for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) {
+		if (s[i].name[0] == '\0' || s[i].name[0] == ' ') {
+			memset(s[i].name, 0, sizeof(s[i].name));
+			strscpy(s[i].name, name, IFNAMSIZ);
+			memcpy(&s[i].map, map, sizeof(s[i].map));
+			break;
+		}
+	}
+
+	return i >= NETDEV_BOOT_SETUP_MAX ? 0 : 1;
+}
+
+/**
+ * netdev_boot_setup_check	- check boot time settings
+ * @dev: the netdevice
+ *
+ * Check boot time settings for the device.
+ * The found settings are set for the device to be used
+ * later in the device probing.
+ * Returns 0 if no settings found, 1 if they are.
+ */
+int netdev_boot_setup_check(struct net_device *dev)
+{
+	struct netdev_boot_setup *s = dev_boot_setup;
+	int i;
+
+	for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) {
+		if (s[i].name[0] != '\0' && s[i].name[0] != ' ' &&
+		    !strcmp(dev->name, s[i].name)) {
+			dev->irq = s[i].map.irq;
+			dev->base_addr = s[i].map.base_addr;
+			dev->mem_start = s[i].map.mem_start;
+			dev->mem_end = s[i].map.mem_end;
+			return 1;
+		}
+	}
+	return 0;
+}
+EXPORT_SYMBOL(netdev_boot_setup_check);
+
+/**
+ * netdev_boot_base	- get address from boot time settings
+ * @prefix: prefix for network device
+ * @unit: id for network device
+ *
+ * Check boot time settings for the base address of device.
+ * The found settings are set for the device to be used
+ * later in the device probing.
+ * Returns 0 if no settings found.
+ */
+static unsigned long netdev_boot_base(const char *prefix, int unit)
+{
+	const struct netdev_boot_setup *s = dev_boot_setup;
+	char name[IFNAMSIZ];
+	int i;
+
+	sprintf(name, "%s%d", prefix, unit);
+
+	/*
+	 * If device already registered then return base of 1
+	 * to indicate not to probe for this interface
+	 */
+	if (__dev_get_by_name(&init_net, name))
+		return 1;
+
+	for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++)
+		if (!strcmp(name, s[i].name))
+			return s[i].map.base_addr;
+	return 0;
+}
+
+/*
+ * Saves at boot time configured settings for any netdevice.
+ */
+static int __init netdev_boot_setup(char *str)
+{
+	int ints[5];
+	struct ifmap map;
+
+	str = get_options(str, ARRAY_SIZE(ints), ints);
+	if (!str || !*str)
+		return 0;
+
+	/* Save settings */
+	memset(&map, 0, sizeof(map));
+	if (ints[0] > 0)
+		map.irq = ints[1];
+	if (ints[0] > 1)
+		map.base_addr = ints[2];
+	if (ints[0] > 2)
+		map.mem_start = ints[3];
+	if (ints[0] > 3)
+		map.mem_end = ints[4];
+
+	/* Add new entry to the list */
+	return netdev_boot_setup_add(str, &map);
+}
+
+__setup("netdev=", netdev_boot_setup);
+
+static int __init ether_boot_setup(char *str)
+{
+	return netdev_boot_setup(str);
+}
+__setup("ether=", ether_boot_setup);
+
+
+/* A unified ethernet device probe.  This is the easiest way to have every
+ * ethernet adaptor have the name "eth[0123...]".
+ */
+
+struct devprobe2 {
+	struct net_device *(*probe)(int unit);
+	int status;	/* non-zero if autoprobe has failed */
+};
+
+static int __init probe_list2(int unit, struct devprobe2 *p, int autoprobe)
+{
+	struct net_device *dev;
+
+	for (; p->probe; p++) {
+		if (autoprobe && p->status)
+			continue;
+		dev = p->probe(unit);
+		if (!IS_ERR(dev))
+			return 0;
+		if (autoprobe)
+			p->status = PTR_ERR(dev);
+	}
+	return -ENODEV;
+}
+
+/* ISA probes that touch addresses < 0x400 (including those that also
+ * look for EISA/PCI cards in addition to ISA cards).
+ */
+static struct devprobe2 isa_probes[] __initdata = {
+#ifdef CONFIG_3C515
+	{tc515_probe, 0},
+#endif
+#ifdef CONFIG_ULTRA
+	{ultra_probe, 0},
+#endif
+#ifdef CONFIG_WD80x3
+	{wd_probe, 0},
+#endif
+#if defined(CONFIG_NE2000) /* ISA (use ne2k-pci for PCI cards) */
+	{ne_probe, 0},
+#endif
+#ifdef CONFIG_LANCE		/* ISA/VLB (use pcnet32 for PCI cards) */
+	{lance_probe, 0},
+#endif
+#ifdef CONFIG_SMC9194
+	{smc_init, 0},
+#endif
+#ifdef CONFIG_CS89x0_ISA
+	{cs89x0_probe, 0},
+#endif
+	{NULL, 0},
+};
+
+/* Unified ethernet device probe, segmented per architecture and
+ * per bus interface. This drives the legacy devices only for now.
+ */
+
+static void __init ethif_probe2(int unit)
+{
+	unsigned long base_addr = netdev_boot_base("eth", unit);
+
+	if (base_addr == 1)
+		return;
+
+	probe_list2(unit, isa_probes, base_addr == 0);
+}
+
+/*  Statically configured drivers -- order matters here. */
+static int __init net_olddevs_init(void)
+{
+	int num;
+
+	for (num = 0; num < 8; ++num)
+		ethif_probe2(num);
+
+#ifdef CONFIG_COPS
+	cops_probe(0);
+	cops_probe(1);
+	cops_probe(2);
+#endif
+
+	return 0;
+}
+
+device_initcall(net_olddevs_init);