Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 592 insertions, 0 deletions

diff --git a/drivers/net/can/dev/dev.c b/drivers/net/can/dev/dev.c
new file mode 100644
index 000000000..7f9334a8a
--- /dev/null
+++ b/drivers/net/can/dev/dev.c
@@ -0,0 +1,592 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (C) 2005 Marc Kleine-Budde, Pengutronix
+ * Copyright (C) 2006 Andrey Volkov, Varma Electronics
+ * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/workqueue.h>
+#include <linux/can.h>
+#include <linux/can/can-ml.h>
+#include <linux/can/dev.h>
+#include <linux/can/skb.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of.h>
+
+static void can_update_state_error_stats(struct net_device *dev,
+					 enum can_state new_state)
+{
+	struct can_priv *priv = netdev_priv(dev);
+
+	if (new_state <= priv->state)
+		return;
+
+	switch (new_state) {
+	case CAN_STATE_ERROR_WARNING:
+		priv->can_stats.error_warning++;
+		break;
+	case CAN_STATE_ERROR_PASSIVE:
+		priv->can_stats.error_passive++;
+		break;
+	case CAN_STATE_BUS_OFF:
+		priv->can_stats.bus_off++;
+		break;
+	default:
+		break;
+	}
+}
+
+static int can_tx_state_to_frame(struct net_device *dev, enum can_state state)
+{
+	switch (state) {
+	case CAN_STATE_ERROR_ACTIVE:
+		return CAN_ERR_CRTL_ACTIVE;
+	case CAN_STATE_ERROR_WARNING:
+		return CAN_ERR_CRTL_TX_WARNING;
+	case CAN_STATE_ERROR_PASSIVE:
+		return CAN_ERR_CRTL_TX_PASSIVE;
+	default:
+		return 0;
+	}
+}
+
+static int can_rx_state_to_frame(struct net_device *dev, enum can_state state)
+{
+	switch (state) {
+	case CAN_STATE_ERROR_ACTIVE:
+		return CAN_ERR_CRTL_ACTIVE;
+	case CAN_STATE_ERROR_WARNING:
+		return CAN_ERR_CRTL_RX_WARNING;
+	case CAN_STATE_ERROR_PASSIVE:
+		return CAN_ERR_CRTL_RX_PASSIVE;
+	default:
+		return 0;
+	}
+}
+
+const char *can_get_state_str(const enum can_state state)
+{
+	switch (state) {
+	case CAN_STATE_ERROR_ACTIVE:
+		return "Error Active";
+	case CAN_STATE_ERROR_WARNING:
+		return "Error Warning";
+	case CAN_STATE_ERROR_PASSIVE:
+		return "Error Passive";
+	case CAN_STATE_BUS_OFF:
+		return "Bus Off";
+	case CAN_STATE_STOPPED:
+		return "Stopped";
+	case CAN_STATE_SLEEPING:
+		return "Sleeping";
+	default:
+		return "<unknown>";
+	}
+
+	return "<unknown>";
+}
+EXPORT_SYMBOL_GPL(can_get_state_str);
+
+void can_change_state(struct net_device *dev, struct can_frame *cf,
+		      enum can_state tx_state, enum can_state rx_state)
+{
+	struct can_priv *priv = netdev_priv(dev);
+	enum can_state new_state = max(tx_state, rx_state);
+
+	if (unlikely(new_state == priv->state)) {
+		netdev_warn(dev, "%s: oops, state did not change", __func__);
+		return;
+	}
+
+	netdev_dbg(dev, "Controller changed from %s State (%d) into %s State (%d).\n",
+		   can_get_state_str(priv->state), priv->state,
+		   can_get_state_str(new_state), new_state);
+
+	can_update_state_error_stats(dev, new_state);
+	priv->state = new_state;
+
+	if (!cf)
+		return;
+
+	if (unlikely(new_state == CAN_STATE_BUS_OFF)) {
+		cf->can_id |= CAN_ERR_BUSOFF;
+		return;
+	}
+
+	cf->can_id |= CAN_ERR_CRTL;
+	cf->data[1] |= tx_state >= rx_state ?
+		       can_tx_state_to_frame(dev, tx_state) : 0;
+	cf->data[1] |= tx_state <= rx_state ?
+		       can_rx_state_to_frame(dev, rx_state) : 0;
+}
+EXPORT_SYMBOL_GPL(can_change_state);
+
+/* CAN device restart for bus-off recovery */
+static void can_restart(struct net_device *dev)
+{
+	struct can_priv *priv = netdev_priv(dev);
+	struct sk_buff *skb;
+	struct can_frame *cf;
+	int err;
+
+	BUG_ON(netif_carrier_ok(dev));
+
+	/* No synchronization needed because the device is bus-off and
+	 * no messages can come in or go out.
+	 */
+	can_flush_echo_skb(dev);
+
+	/* send restart message upstream */
+	skb = alloc_can_err_skb(dev, &cf);
+	if (!skb)
+		goto restart;
+
+	cf->can_id |= CAN_ERR_RESTARTED;
+
+	netif_rx(skb);
+
+restart:
+	netdev_dbg(dev, "restarted\n");
+	priv->can_stats.restarts++;
+
+	/* Now restart the device */
+	err = priv->do_set_mode(dev, CAN_MODE_START);
+
+	netif_carrier_on(dev);
+	if (err)
+		netdev_err(dev, "Error %d during restart", err);
+}
+
+static void can_restart_work(struct work_struct *work)
+{
+	struct delayed_work *dwork = to_delayed_work(work);
+	struct can_priv *priv = container_of(dwork, struct can_priv,
+					     restart_work);
+
+	can_restart(priv->dev);
+}
+
+int can_restart_now(struct net_device *dev)
+{
+	struct can_priv *priv = netdev_priv(dev);
+
+	/* A manual restart is only permitted if automatic restart is
+	 * disabled and the device is in the bus-off state
+	 */
+	if (priv->restart_ms)
+		return -EINVAL;
+	if (priv->state != CAN_STATE_BUS_OFF)
+		return -EBUSY;
+
+	cancel_delayed_work_sync(&priv->restart_work);
+	can_restart(dev);
+
+	return 0;
+}
+
+/* CAN bus-off
+ *
+ * This functions should be called when the device goes bus-off to
+ * tell the netif layer that no more packets can be sent or received.
+ * If enabled, a timer is started to trigger bus-off recovery.
+ */
+void can_bus_off(struct net_device *dev)
+{
+	struct can_priv *priv = netdev_priv(dev);
+
+	if (priv->restart_ms)
+		netdev_info(dev, "bus-off, scheduling restart in %d ms\n",
+			    priv->restart_ms);
+	else
+		netdev_info(dev, "bus-off\n");
+
+	netif_carrier_off(dev);
+
+	if (priv->restart_ms)
+		schedule_delayed_work(&priv->restart_work,
+				      msecs_to_jiffies(priv->restart_ms));
+}
+EXPORT_SYMBOL_GPL(can_bus_off);
+
+void can_setup(struct net_device *dev)
+{
+	dev->type = ARPHRD_CAN;
+	dev->mtu = CAN_MTU;
+	dev->hard_header_len = 0;
+	dev->addr_len = 0;
+	dev->tx_queue_len = 10;
+
+	/* New-style flags. */
+	dev->flags = IFF_NOARP;
+	dev->features = NETIF_F_HW_CSUM;
+}
+
+/* Allocate and setup space for the CAN network device */
+struct net_device *alloc_candev_mqs(int sizeof_priv, unsigned int echo_skb_max,
+				    unsigned int txqs, unsigned int rxqs)
+{
+	struct can_ml_priv *can_ml;
+	struct net_device *dev;
+	struct can_priv *priv;
+	int size;
+
+	/* We put the driver's priv, the CAN mid layer priv and the
+	 * echo skb into the netdevice's priv. The memory layout for
+	 * the netdev_priv is like this:
+	 *
+	 * +-------------------------+
+	 * | driver's priv           |
+	 * +-------------------------+
+	 * | struct can_ml_priv      |
+	 * +-------------------------+
+	 * | array of struct sk_buff |
+	 * +-------------------------+
+	 */
+
+	size = ALIGN(sizeof_priv, NETDEV_ALIGN) + sizeof(struct can_ml_priv);
+
+	if (echo_skb_max)
+		size = ALIGN(size, sizeof(struct sk_buff *)) +
+			echo_skb_max * sizeof(struct sk_buff *);
+
+	dev = alloc_netdev_mqs(size, "can%d", NET_NAME_UNKNOWN, can_setup,
+			       txqs, rxqs);
+	if (!dev)
+		return NULL;
+
+	priv = netdev_priv(dev);
+	priv->dev = dev;
+
+	can_ml = (void *)priv + ALIGN(sizeof_priv, NETDEV_ALIGN);
+	can_set_ml_priv(dev, can_ml);
+
+	if (echo_skb_max) {
+		priv->echo_skb_max = echo_skb_max;
+		priv->echo_skb = (void *)priv +
+			(size - echo_skb_max * sizeof(struct sk_buff *));
+	}
+
+	priv->state = CAN_STATE_STOPPED;
+
+	INIT_DELAYED_WORK(&priv->restart_work, can_restart_work);
+
+	return dev;
+}
+EXPORT_SYMBOL_GPL(alloc_candev_mqs);
+
+/* Free space of the CAN network device */
+void free_candev(struct net_device *dev)
+{
+	free_netdev(dev);
+}
+EXPORT_SYMBOL_GPL(free_candev);
+
+/* changing MTU and control mode for CAN/CANFD devices */
+int can_change_mtu(struct net_device *dev, int new_mtu)
+{
+	struct can_priv *priv = netdev_priv(dev);
+	u32 ctrlmode_static = can_get_static_ctrlmode(priv);
+
+	/* Do not allow changing the MTU while running */
+	if (dev->flags & IFF_UP)
+		return -EBUSY;
+
+	/* allow change of MTU according to the CANFD ability of the device */
+	switch (new_mtu) {
+	case CAN_MTU:
+		/* 'CANFD-only' controllers can not switch to CAN_MTU */
+		if (ctrlmode_static & CAN_CTRLMODE_FD)
+			return -EINVAL;
+
+		priv->ctrlmode &= ~CAN_CTRLMODE_FD;
+		break;
+
+	case CANFD_MTU:
+		/* check for potential CANFD ability */
+		if (!(priv->ctrlmode_supported & CAN_CTRLMODE_FD) &&
+		    !(ctrlmode_static & CAN_CTRLMODE_FD))
+			return -EINVAL;
+
+		priv->ctrlmode |= CAN_CTRLMODE_FD;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	dev->mtu = new_mtu;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(can_change_mtu);
+
+/* generic implementation of netdev_ops::ndo_eth_ioctl for CAN devices
+ * supporting hardware timestamps
+ */
+int can_eth_ioctl_hwts(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+	struct hwtstamp_config hwts_cfg = { 0 };
+
+	switch (cmd) {
+	case SIOCSHWTSTAMP: /* set */
+		if (copy_from_user(&hwts_cfg, ifr->ifr_data, sizeof(hwts_cfg)))
+			return -EFAULT;
+		if (hwts_cfg.tx_type == HWTSTAMP_TX_ON &&
+		    hwts_cfg.rx_filter == HWTSTAMP_FILTER_ALL)
+			return 0;
+		return -ERANGE;
+
+	case SIOCGHWTSTAMP: /* get */
+		hwts_cfg.tx_type = HWTSTAMP_TX_ON;
+		hwts_cfg.rx_filter = HWTSTAMP_FILTER_ALL;
+		if (copy_to_user(ifr->ifr_data, &hwts_cfg, sizeof(hwts_cfg)))
+			return -EFAULT;
+		return 0;
+
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+EXPORT_SYMBOL(can_eth_ioctl_hwts);
+
+/* generic implementation of ethtool_ops::get_ts_info for CAN devices
+ * supporting hardware timestamps
+ */
+int can_ethtool_op_get_ts_info_hwts(struct net_device *dev,
+				    struct ethtool_ts_info *info)
+{
+	info->so_timestamping =
+		SOF_TIMESTAMPING_TX_SOFTWARE |
+		SOF_TIMESTAMPING_RX_SOFTWARE |
+		SOF_TIMESTAMPING_SOFTWARE |
+		SOF_TIMESTAMPING_TX_HARDWARE |
+		SOF_TIMESTAMPING_RX_HARDWARE |
+		SOF_TIMESTAMPING_RAW_HARDWARE;
+	info->phc_index = -1;
+	info->tx_types = BIT(HWTSTAMP_TX_ON);
+	info->rx_filters = BIT(HWTSTAMP_FILTER_ALL);
+
+	return 0;
+}
+EXPORT_SYMBOL(can_ethtool_op_get_ts_info_hwts);
+
+/* Common open function when the device gets opened.
+ *
+ * This function should be called in the open function of the device
+ * driver.
+ */
+int open_candev(struct net_device *dev)
+{
+	struct can_priv *priv = netdev_priv(dev);
+
+	if (!priv->bittiming.bitrate) {
+		netdev_err(dev, "bit-timing not yet defined\n");
+		return -EINVAL;
+	}
+
+	/* For CAN FD the data bitrate has to be >= the arbitration bitrate */
+	if ((priv->ctrlmode & CAN_CTRLMODE_FD) &&
+	    (!priv->data_bittiming.bitrate ||
+	     priv->data_bittiming.bitrate < priv->bittiming.bitrate)) {
+		netdev_err(dev, "incorrect/missing data bit-timing\n");
+		return -EINVAL;
+	}
+
+	/* Switch carrier on if device was stopped while in bus-off state */
+	if (!netif_carrier_ok(dev))
+		netif_carrier_on(dev);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(open_candev);
+
+#ifdef CONFIG_OF
+/* Common function that can be used to understand the limitation of
+ * a transceiver when it provides no means to determine these limitations
+ * at runtime.
+ */
+void of_can_transceiver(struct net_device *dev)
+{
+	struct device_node *dn;
+	struct can_priv *priv = netdev_priv(dev);
+	struct device_node *np = dev->dev.parent->of_node;
+	int ret;
+
+	dn = of_get_child_by_name(np, "can-transceiver");
+	if (!dn)
+		return;
+
+	ret = of_property_read_u32(dn, "max-bitrate", &priv->bitrate_max);
+	of_node_put(dn);
+	if ((ret && ret != -EINVAL) || (!ret && !priv->bitrate_max))
+		netdev_warn(dev, "Invalid value for transceiver max bitrate. Ignoring bitrate limit.\n");
+}
+EXPORT_SYMBOL_GPL(of_can_transceiver);
+#endif
+
+/* Common close function for cleanup before the device gets closed.
+ *
+ * This function should be called in the close function of the device
+ * driver.
+ */
+void close_candev(struct net_device *dev)
+{
+	struct can_priv *priv = netdev_priv(dev);
+
+	cancel_delayed_work_sync(&priv->restart_work);
+	can_flush_echo_skb(dev);
+}
+EXPORT_SYMBOL_GPL(close_candev);
+
+static int can_set_termination(struct net_device *ndev, u16 term)
+{
+	struct can_priv *priv = netdev_priv(ndev);
+	int set;
+
+	if (term == priv->termination_gpio_ohms[CAN_TERMINATION_GPIO_ENABLED])
+		set = 1;
+	else
+		set = 0;
+
+	gpiod_set_value(priv->termination_gpio, set);
+
+	return 0;
+}
+
+static int can_get_termination(struct net_device *ndev)
+{
+	struct can_priv *priv = netdev_priv(ndev);
+	struct device *dev = ndev->dev.parent;
+	struct gpio_desc *gpio;
+	u32 term;
+	int ret;
+
+	/* Disabling termination by default is the safe choice: Else if many
+	 * bus participants enable it, no communication is possible at all.
+	 */
+	gpio = devm_gpiod_get_optional(dev, "termination", GPIOD_OUT_LOW);
+	if (IS_ERR(gpio))
+		return dev_err_probe(dev, PTR_ERR(gpio),
+				     "Cannot get termination-gpios\n");
+
+	if (!gpio)
+		return 0;
+
+	ret = device_property_read_u32(dev, "termination-ohms", &term);
+	if (ret) {
+		netdev_err(ndev, "Cannot get termination-ohms: %pe\n",
+			   ERR_PTR(ret));
+		return ret;
+	}
+
+	if (term > U16_MAX) {
+		netdev_err(ndev, "Invalid termination-ohms value (%u > %u)\n",
+			   term, U16_MAX);
+		return -EINVAL;
+	}
+
+	priv->termination_const_cnt = ARRAY_SIZE(priv->termination_gpio_ohms);
+	priv->termination_const = priv->termination_gpio_ohms;
+	priv->termination_gpio = gpio;
+	priv->termination_gpio_ohms[CAN_TERMINATION_GPIO_DISABLED] =
+		CAN_TERMINATION_DISABLED;
+	priv->termination_gpio_ohms[CAN_TERMINATION_GPIO_ENABLED] = term;
+	priv->do_set_termination = can_set_termination;
+
+	return 0;
+}
+
+static bool
+can_bittiming_const_valid(const struct can_bittiming_const *btc)
+{
+	if (!btc)
+		return true;
+
+	if (!btc->sjw_max)
+		return false;
+
+	return true;
+}
+
+/* Register the CAN network device */
+int register_candev(struct net_device *dev)
+{
+	struct can_priv *priv = netdev_priv(dev);
+	int err;
+
+	/* Ensure termination_const, termination_const_cnt and
+	 * do_set_termination consistency. All must be either set or
+	 * unset.
+	 */
+	if ((!priv->termination_const != !priv->termination_const_cnt) ||
+	    (!priv->termination_const != !priv->do_set_termination))
+		return -EINVAL;
+
+	if (!priv->bitrate_const != !priv->bitrate_const_cnt)
+		return -EINVAL;
+
+	if (!priv->data_bitrate_const != !priv->data_bitrate_const_cnt)
+		return -EINVAL;
+
+	/* We only support either fixed bit rates or bit timing const. */
+	if ((priv->bitrate_const || priv->data_bitrate_const) &&
+	    (priv->bittiming_const || priv->data_bittiming_const))
+		return -EINVAL;
+
+	if (!can_bittiming_const_valid(priv->bittiming_const) ||
+	    !can_bittiming_const_valid(priv->data_bittiming_const))
+		return -EINVAL;
+
+	if (!priv->termination_const) {
+		err = can_get_termination(dev);
+		if (err)
+			return err;
+	}
+
+	dev->rtnl_link_ops = &can_link_ops;
+	netif_carrier_off(dev);
+
+	return register_netdev(dev);
+}
+EXPORT_SYMBOL_GPL(register_candev);
+
+/* Unregister the CAN network device */
+void unregister_candev(struct net_device *dev)
+{
+	unregister_netdev(dev);
+}
+EXPORT_SYMBOL_GPL(unregister_candev);
+
+/* Test if a network device is a candev based device
+ * and return the can_priv* if so.
+ */
+struct can_priv *safe_candev_priv(struct net_device *dev)
+{
+	if (dev->type != ARPHRD_CAN || dev->rtnl_link_ops != &can_link_ops)
+		return NULL;
+
+	return netdev_priv(dev);
+}
+EXPORT_SYMBOL_GPL(safe_candev_priv);
+
+static __init int can_dev_init(void)
+{
+	int err;
+
+	err = can_netlink_register();
+	if (!err)
+		pr_info("CAN device driver interface\n");
+
+	return err;
+}
+module_init(can_dev_init);
+
+static __exit void can_dev_exit(void)
+{
+	can_netlink_unregister();
+}
+module_exit(can_dev_exit);
+
+MODULE_ALIAS_RTNL_LINK("can");