Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 866 insertions, 0 deletions

diff --git a/drivers/net/can/peak_canfd/peak_pciefd_main.c b/drivers/net/can/peak_canfd/peak_pciefd_main.c
new file mode 100644
index 000000000..1df3c4b54
--- /dev/null
+++ b/drivers/net/can/peak_canfd/peak_pciefd_main.c
@@ -0,0 +1,866 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (C) 2007, 2011 Wolfgang Grandegger <wg@grandegger.com>
+ * Copyright (C) 2012 Stephane Grosjean <s.grosjean@peak-system.com>
+ *
+ * Derived from the PCAN project file driver/src/pcan_pci.c:
+ *
+ * Copyright (C) 2001-2006  PEAK System-Technik GmbH
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/can.h>
+#include <linux/can/dev.h>
+
+#include "peak_canfd_user.h"
+
+MODULE_AUTHOR("Stephane Grosjean <s.grosjean@peak-system.com>");
+MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCIe/M.2 FD family cards");
+MODULE_LICENSE("GPL v2");
+
+#define PCIEFD_DRV_NAME		"peak_pciefd"
+
+#define PEAK_PCI_VENDOR_ID	0x001c	/* The PCI device and vendor IDs */
+#define PEAK_PCIEFD_ID		0x0013	/* for PCIe slot cards */
+#define PCAN_CPCIEFD_ID		0x0014	/* for Compact-PCI Serial slot cards */
+#define PCAN_PCIE104FD_ID	0x0017	/* for PCIe-104 Express slot cards */
+#define PCAN_MINIPCIEFD_ID      0x0018	/* for mini-PCIe slot cards */
+#define PCAN_PCIEFD_OEM_ID      0x0019	/* for PCIe slot OEM cards */
+#define PCAN_M2_ID		0x001a	/* for M2 slot cards */
+
+/* PEAK PCIe board access description */
+#define PCIEFD_BAR0_SIZE		(64 * 1024)
+#define PCIEFD_RX_DMA_SIZE		(4 * 1024)
+#define PCIEFD_TX_DMA_SIZE		(4 * 1024)
+
+#define PCIEFD_TX_PAGE_SIZE		(2 * 1024)
+
+/* System Control Registers */
+#define PCIEFD_REG_SYS_CTL_SET		0x0000	/* set bits */
+#define PCIEFD_REG_SYS_CTL_CLR		0x0004	/* clear bits */
+
+/* Version info registers */
+#define PCIEFD_REG_SYS_VER1		0x0040	/* version reg #1 */
+#define PCIEFD_REG_SYS_VER2		0x0044	/* version reg #2 */
+
+#define PCIEFD_FW_VERSION(x, y, z)	(((u32)(x) << 24) | \
+					 ((u32)(y) << 16) | \
+					 ((u32)(z) << 8))
+
+/* System Control Registers Bits */
+#define PCIEFD_SYS_CTL_TS_RST		0x00000001	/* timestamp clock */
+#define PCIEFD_SYS_CTL_CLK_EN		0x00000002	/* system clock */
+
+/* CAN-FD channel addresses */
+#define PCIEFD_CANX_OFF(c)		(((c) + 1) * 0x1000)
+
+#define PCIEFD_ECHO_SKB_MAX		PCANFD_ECHO_SKB_DEF
+
+/* CAN-FD channel registers */
+#define PCIEFD_REG_CAN_MISC		0x0000	/* Misc. control */
+#define PCIEFD_REG_CAN_CLK_SEL		0x0008	/* Clock selector */
+#define PCIEFD_REG_CAN_CMD_PORT_L	0x0010	/* 64-bits command port */
+#define PCIEFD_REG_CAN_CMD_PORT_H	0x0014
+#define PCIEFD_REG_CAN_TX_REQ_ACC	0x0020	/* Tx request accumulator */
+#define PCIEFD_REG_CAN_TX_CTL_SET	0x0030	/* Tx control set register */
+#define PCIEFD_REG_CAN_TX_CTL_CLR	0x0038	/* Tx control clear register */
+#define PCIEFD_REG_CAN_TX_DMA_ADDR_L	0x0040	/* 64-bits addr for Tx DMA */
+#define PCIEFD_REG_CAN_TX_DMA_ADDR_H	0x0044
+#define PCIEFD_REG_CAN_RX_CTL_SET	0x0050	/* Rx control set register */
+#define PCIEFD_REG_CAN_RX_CTL_CLR	0x0058	/* Rx control clear register */
+#define PCIEFD_REG_CAN_RX_CTL_WRT	0x0060	/* Rx control write register */
+#define PCIEFD_REG_CAN_RX_CTL_ACK	0x0068	/* Rx control ACK register */
+#define PCIEFD_REG_CAN_RX_DMA_ADDR_L	0x0070	/* 64-bits addr for Rx DMA */
+#define PCIEFD_REG_CAN_RX_DMA_ADDR_H	0x0074
+
+/* CAN-FD channel misc register bits */
+#define CANFD_MISC_TS_RST		0x00000001	/* timestamp cnt rst */
+
+/* CAN-FD channel Clock SELector Source & DIVider */
+#define CANFD_CLK_SEL_DIV_MASK		0x00000007
+#define CANFD_CLK_SEL_DIV_60MHZ		0x00000000	/* SRC=240MHz only */
+#define CANFD_CLK_SEL_DIV_40MHZ		0x00000001	/* SRC=240MHz only */
+#define CANFD_CLK_SEL_DIV_30MHZ		0x00000002	/* SRC=240MHz only */
+#define CANFD_CLK_SEL_DIV_24MHZ		0x00000003	/* SRC=240MHz only */
+#define CANFD_CLK_SEL_DIV_20MHZ		0x00000004	/* SRC=240MHz only */
+
+#define CANFD_CLK_SEL_SRC_MASK		0x00000008	/* 0=80MHz, 1=240MHz */
+#define CANFD_CLK_SEL_SRC_240MHZ	0x00000008
+#define CANFD_CLK_SEL_SRC_80MHZ		(~CANFD_CLK_SEL_SRC_240MHZ & \
+							CANFD_CLK_SEL_SRC_MASK)
+
+#define CANFD_CLK_SEL_20MHZ		(CANFD_CLK_SEL_SRC_240MHZ |\
+						CANFD_CLK_SEL_DIV_20MHZ)
+#define CANFD_CLK_SEL_24MHZ		(CANFD_CLK_SEL_SRC_240MHZ |\
+						CANFD_CLK_SEL_DIV_24MHZ)
+#define CANFD_CLK_SEL_30MHZ		(CANFD_CLK_SEL_SRC_240MHZ |\
+						CANFD_CLK_SEL_DIV_30MHZ)
+#define CANFD_CLK_SEL_40MHZ		(CANFD_CLK_SEL_SRC_240MHZ |\
+						CANFD_CLK_SEL_DIV_40MHZ)
+#define CANFD_CLK_SEL_60MHZ		(CANFD_CLK_SEL_SRC_240MHZ |\
+						CANFD_CLK_SEL_DIV_60MHZ)
+#define CANFD_CLK_SEL_80MHZ		(CANFD_CLK_SEL_SRC_80MHZ)
+
+/* CAN-FD channel Rx/Tx control register bits */
+#define CANFD_CTL_UNC_BIT		0x00010000	/* Uncached DMA mem */
+#define CANFD_CTL_RST_BIT		0x00020000	/* reset DMA action */
+#define CANFD_CTL_IEN_BIT		0x00040000	/* IRQ enable */
+
+/* Rx IRQ Count and Time Limits */
+#define CANFD_CTL_IRQ_CL_DEF	16	/* Rx msg max nb per IRQ in Rx DMA */
+#define CANFD_CTL_IRQ_TL_DEF	10	/* Time before IRQ if < CL (x100 µs) */
+
+/* Tx anticipation window (link logical address should be aligned on 2K
+ * boundary)
+ */
+#define PCIEFD_TX_PAGE_COUNT	(PCIEFD_TX_DMA_SIZE / PCIEFD_TX_PAGE_SIZE)
+
+#define CANFD_MSG_LNK_TX	0x1001	/* Tx msgs link */
+
+/* 32-bits IRQ status fields, heading Rx DMA area */
+static inline int pciefd_irq_tag(u32 irq_status)
+{
+	return irq_status & 0x0000000f;
+}
+
+static inline int pciefd_irq_rx_cnt(u32 irq_status)
+{
+	return (irq_status & 0x000007f0) >> 4;
+}
+
+static inline int pciefd_irq_is_lnk(u32 irq_status)
+{
+	return irq_status & 0x00010000;
+}
+
+/* Rx record */
+struct pciefd_rx_dma {
+	__le32 irq_status;
+	__le32 sys_time_low;
+	__le32 sys_time_high;
+	struct pucan_rx_msg msg[];
+} __packed __aligned(4);
+
+/* Tx Link record */
+struct pciefd_tx_link {
+	__le16 size;
+	__le16 type;
+	__le32 laddr_lo;
+	__le32 laddr_hi;
+} __packed __aligned(4);
+
+/* Tx page descriptor */
+struct pciefd_page {
+	void *vbase;			/* page virtual address */
+	dma_addr_t lbase;		/* page logical address */
+	u32 offset;
+	u32 size;
+};
+
+/* CAN-FD channel object */
+struct pciefd_board;
+struct pciefd_can {
+	struct peak_canfd_priv ucan;	/* must be the first member */
+	void __iomem *reg_base;		/* channel config base addr */
+	struct pciefd_board *board;	/* reverse link */
+
+	struct pucan_command pucan_cmd;	/* command buffer */
+
+	dma_addr_t rx_dma_laddr;	/* DMA virtual and logical addr */
+	void *rx_dma_vaddr;		/* for Rx and Tx areas */
+	dma_addr_t tx_dma_laddr;
+	void *tx_dma_vaddr;
+
+	struct pciefd_page tx_pages[PCIEFD_TX_PAGE_COUNT];
+	u16 tx_pages_free;		/* free Tx pages counter */
+	u16 tx_page_index;		/* current page used for Tx */
+	spinlock_t tx_lock;
+
+	u32 irq_status;
+	u32 irq_tag;				/* next irq tag */
+};
+
+/* PEAK-PCIe FD board object */
+struct pciefd_board {
+	void __iomem *reg_base;
+	struct pci_dev *pci_dev;
+	int can_count;
+	spinlock_t cmd_lock;		/* 64-bits cmds must be atomic */
+	struct pciefd_can *can[];	/* array of network devices */
+};
+
+/* supported device ids. */
+static const struct pci_device_id peak_pciefd_tbl[] = {
+	{PEAK_PCI_VENDOR_ID, PEAK_PCIEFD_ID, PCI_ANY_ID, PCI_ANY_ID,},
+	{PEAK_PCI_VENDOR_ID, PCAN_CPCIEFD_ID, PCI_ANY_ID, PCI_ANY_ID,},
+	{PEAK_PCI_VENDOR_ID, PCAN_PCIE104FD_ID, PCI_ANY_ID, PCI_ANY_ID,},
+	{PEAK_PCI_VENDOR_ID, PCAN_MINIPCIEFD_ID, PCI_ANY_ID, PCI_ANY_ID,},
+	{PEAK_PCI_VENDOR_ID, PCAN_PCIEFD_OEM_ID, PCI_ANY_ID, PCI_ANY_ID,},
+	{PEAK_PCI_VENDOR_ID, PCAN_M2_ID, PCI_ANY_ID, PCI_ANY_ID,},
+	{0,}
+};
+
+MODULE_DEVICE_TABLE(pci, peak_pciefd_tbl);
+
+/* read a 32 bits value from a SYS block register */
+static inline u32 pciefd_sys_readreg(const struct pciefd_board *priv, u16 reg)
+{
+	return readl(priv->reg_base + reg);
+}
+
+/* write a 32 bits value into a SYS block register */
+static inline void pciefd_sys_writereg(const struct pciefd_board *priv,
+				       u32 val, u16 reg)
+{
+	writel(val, priv->reg_base + reg);
+}
+
+/* read a 32 bits value from CAN-FD block register */
+static inline u32 pciefd_can_readreg(const struct pciefd_can *priv, u16 reg)
+{
+	return readl(priv->reg_base + reg);
+}
+
+/* write a 32 bits value into a CAN-FD block register */
+static inline void pciefd_can_writereg(const struct pciefd_can *priv,
+				       u32 val, u16 reg)
+{
+	writel(val, priv->reg_base + reg);
+}
+
+/* give a channel logical Rx DMA address to the board */
+static void pciefd_can_setup_rx_dma(struct pciefd_can *priv)
+{
+#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
+	const u32 dma_addr_h = (u32)(priv->rx_dma_laddr >> 32);
+#else
+	const u32 dma_addr_h = 0;
+#endif
+
+	/* (DMA must be reset for Rx) */
+	pciefd_can_writereg(priv, CANFD_CTL_RST_BIT, PCIEFD_REG_CAN_RX_CTL_SET);
+
+	/* write the logical address of the Rx DMA area for this channel */
+	pciefd_can_writereg(priv, (u32)priv->rx_dma_laddr,
+			    PCIEFD_REG_CAN_RX_DMA_ADDR_L);
+	pciefd_can_writereg(priv, dma_addr_h, PCIEFD_REG_CAN_RX_DMA_ADDR_H);
+
+	/* also indicates that Rx DMA is cacheable */
+	pciefd_can_writereg(priv, CANFD_CTL_UNC_BIT, PCIEFD_REG_CAN_RX_CTL_CLR);
+}
+
+/* clear channel logical Rx DMA address from the board */
+static void pciefd_can_clear_rx_dma(struct pciefd_can *priv)
+{
+	/* DMA must be reset for Rx */
+	pciefd_can_writereg(priv, CANFD_CTL_RST_BIT, PCIEFD_REG_CAN_RX_CTL_SET);
+
+	/* clear the logical address of the Rx DMA area for this channel */
+	pciefd_can_writereg(priv, 0, PCIEFD_REG_CAN_RX_DMA_ADDR_L);
+	pciefd_can_writereg(priv, 0, PCIEFD_REG_CAN_RX_DMA_ADDR_H);
+}
+
+/* give a channel logical Tx DMA address to the board */
+static void pciefd_can_setup_tx_dma(struct pciefd_can *priv)
+{
+#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
+	const u32 dma_addr_h = (u32)(priv->tx_dma_laddr >> 32);
+#else
+	const u32 dma_addr_h = 0;
+#endif
+
+	/* (DMA must be reset for Tx) */
+	pciefd_can_writereg(priv, CANFD_CTL_RST_BIT, PCIEFD_REG_CAN_TX_CTL_SET);
+
+	/* write the logical address of the Tx DMA area for this channel */
+	pciefd_can_writereg(priv, (u32)priv->tx_dma_laddr,
+			    PCIEFD_REG_CAN_TX_DMA_ADDR_L);
+	pciefd_can_writereg(priv, dma_addr_h, PCIEFD_REG_CAN_TX_DMA_ADDR_H);
+
+	/* also indicates that Tx DMA is cacheable */
+	pciefd_can_writereg(priv, CANFD_CTL_UNC_BIT, PCIEFD_REG_CAN_TX_CTL_CLR);
+}
+
+/* clear channel logical Tx DMA address from the board */
+static void pciefd_can_clear_tx_dma(struct pciefd_can *priv)
+{
+	/* DMA must be reset for Tx */
+	pciefd_can_writereg(priv, CANFD_CTL_RST_BIT, PCIEFD_REG_CAN_TX_CTL_SET);
+
+	/* clear the logical address of the Tx DMA area for this channel */
+	pciefd_can_writereg(priv, 0, PCIEFD_REG_CAN_TX_DMA_ADDR_L);
+	pciefd_can_writereg(priv, 0, PCIEFD_REG_CAN_TX_DMA_ADDR_H);
+}
+
+static void pciefd_can_ack_rx_dma(struct pciefd_can *priv)
+{
+	/* read value of current IRQ tag and inc it for next one */
+	priv->irq_tag = le32_to_cpu(*(__le32 *)priv->rx_dma_vaddr);
+	priv->irq_tag++;
+	priv->irq_tag &= 0xf;
+
+	/* write the next IRQ tag for this CAN */
+	pciefd_can_writereg(priv, priv->irq_tag, PCIEFD_REG_CAN_RX_CTL_ACK);
+}
+
+/* IRQ handler */
+static irqreturn_t pciefd_irq_handler(int irq, void *arg)
+{
+	struct pciefd_can *priv = arg;
+	struct pciefd_rx_dma *rx_dma = priv->rx_dma_vaddr;
+
+	/* INTA mode only to sync with PCIe transaction */
+	if (!pci_dev_msi_enabled(priv->board->pci_dev))
+		(void)pciefd_sys_readreg(priv->board, PCIEFD_REG_SYS_VER1);
+
+	/* read IRQ status from the first 32-bits of the Rx DMA area */
+	priv->irq_status = le32_to_cpu(rx_dma->irq_status);
+
+	/* check if this (shared) IRQ is for this CAN */
+	if (pciefd_irq_tag(priv->irq_status) != priv->irq_tag)
+		return IRQ_NONE;
+
+	/* handle rx messages (if any) */
+	peak_canfd_handle_msgs_list(&priv->ucan,
+				    rx_dma->msg,
+				    pciefd_irq_rx_cnt(priv->irq_status));
+
+	/* handle tx link interrupt (if any) */
+	if (pciefd_irq_is_lnk(priv->irq_status)) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&priv->tx_lock, flags);
+		priv->tx_pages_free++;
+		spin_unlock_irqrestore(&priv->tx_lock, flags);
+
+		/* wake producer up (only if enough room in echo_skb array) */
+		spin_lock_irqsave(&priv->ucan.echo_lock, flags);
+		if (!priv->ucan.can.echo_skb[priv->ucan.echo_idx])
+			netif_wake_queue(priv->ucan.ndev);
+
+		spin_unlock_irqrestore(&priv->ucan.echo_lock, flags);
+	}
+
+	/* re-enable Rx DMA transfer for this CAN */
+	pciefd_can_ack_rx_dma(priv);
+
+	return IRQ_HANDLED;
+}
+
+static int pciefd_enable_tx_path(struct peak_canfd_priv *ucan)
+{
+	struct pciefd_can *priv = (struct pciefd_can *)ucan;
+	int i;
+
+	/* initialize the Tx pages descriptors */
+	priv->tx_pages_free = PCIEFD_TX_PAGE_COUNT - 1;
+	priv->tx_page_index = 0;
+
+	priv->tx_pages[0].vbase = priv->tx_dma_vaddr;
+	priv->tx_pages[0].lbase = priv->tx_dma_laddr;
+
+	for (i = 0; i < PCIEFD_TX_PAGE_COUNT; i++) {
+		priv->tx_pages[i].offset = 0;
+		priv->tx_pages[i].size = PCIEFD_TX_PAGE_SIZE -
+					 sizeof(struct pciefd_tx_link);
+		if (i) {
+			priv->tx_pages[i].vbase =
+					  priv->tx_pages[i - 1].vbase +
+					  PCIEFD_TX_PAGE_SIZE;
+			priv->tx_pages[i].lbase =
+					  priv->tx_pages[i - 1].lbase +
+					  PCIEFD_TX_PAGE_SIZE;
+		}
+	}
+
+	/* setup Tx DMA addresses into IP core */
+	pciefd_can_setup_tx_dma(priv);
+
+	/* start (TX_RST=0) Tx Path */
+	pciefd_can_writereg(priv, CANFD_CTL_RST_BIT, PCIEFD_REG_CAN_TX_CTL_CLR);
+
+	return 0;
+}
+
+/* board specific CANFD command pre-processing */
+static int pciefd_pre_cmd(struct peak_canfd_priv *ucan)
+{
+	struct pciefd_can *priv = (struct pciefd_can *)ucan;
+	u16 cmd = pucan_cmd_get_opcode(&priv->pucan_cmd);
+	int err;
+
+	/* pre-process command */
+	switch (cmd) {
+	case PUCAN_CMD_NORMAL_MODE:
+	case PUCAN_CMD_LISTEN_ONLY_MODE:
+
+		if (ucan->can.state == CAN_STATE_BUS_OFF)
+			break;
+
+		/* going into operational mode: setup IRQ handler */
+		err = request_irq(priv->ucan.ndev->irq,
+				  pciefd_irq_handler,
+				  IRQF_SHARED,
+				  PCIEFD_DRV_NAME,
+				  priv);
+		if (err)
+			return err;
+
+		/* setup Rx DMA address */
+		pciefd_can_setup_rx_dma(priv);
+
+		/* setup max count of msgs per IRQ */
+		pciefd_can_writereg(priv, (CANFD_CTL_IRQ_TL_DEF) << 8 |
+				    CANFD_CTL_IRQ_CL_DEF,
+				    PCIEFD_REG_CAN_RX_CTL_WRT);
+
+		/* clear DMA RST for Rx (Rx start) */
+		pciefd_can_writereg(priv, CANFD_CTL_RST_BIT,
+				    PCIEFD_REG_CAN_RX_CTL_CLR);
+
+		/* reset timestamps */
+		pciefd_can_writereg(priv, !CANFD_MISC_TS_RST,
+				    PCIEFD_REG_CAN_MISC);
+
+		/* do an initial ACK */
+		pciefd_can_ack_rx_dma(priv);
+
+		/* enable IRQ for this CAN after having set next irq_tag */
+		pciefd_can_writereg(priv, CANFD_CTL_IEN_BIT,
+				    PCIEFD_REG_CAN_RX_CTL_SET);
+
+		/* Tx path will be setup as soon as RX_BARRIER is received */
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+/* write a command */
+static int pciefd_write_cmd(struct peak_canfd_priv *ucan)
+{
+	struct pciefd_can *priv = (struct pciefd_can *)ucan;
+	unsigned long flags;
+
+	/* 64-bits command is atomic */
+	spin_lock_irqsave(&priv->board->cmd_lock, flags);
+
+	pciefd_can_writereg(priv, *(u32 *)ucan->cmd_buffer,
+			    PCIEFD_REG_CAN_CMD_PORT_L);
+	pciefd_can_writereg(priv, *(u32 *)(ucan->cmd_buffer + 4),
+			    PCIEFD_REG_CAN_CMD_PORT_H);
+
+	spin_unlock_irqrestore(&priv->board->cmd_lock, flags);
+
+	return 0;
+}
+
+/* board specific CANFD command post-processing */
+static int pciefd_post_cmd(struct peak_canfd_priv *ucan)
+{
+	struct pciefd_can *priv = (struct pciefd_can *)ucan;
+	u16 cmd = pucan_cmd_get_opcode(&priv->pucan_cmd);
+
+	switch (cmd) {
+	case PUCAN_CMD_RESET_MODE:
+
+		if (ucan->can.state == CAN_STATE_STOPPED)
+			break;
+
+		/* controller now in reset mode: */
+
+		/* disable IRQ for this CAN */
+		pciefd_can_writereg(priv, CANFD_CTL_IEN_BIT,
+				    PCIEFD_REG_CAN_RX_CTL_CLR);
+
+		/* stop and reset DMA addresses in Tx/Rx engines */
+		pciefd_can_clear_tx_dma(priv);
+		pciefd_can_clear_rx_dma(priv);
+
+		/* wait for above commands to complete (read cycle) */
+		(void)pciefd_sys_readreg(priv->board, PCIEFD_REG_SYS_VER1);
+
+		free_irq(priv->ucan.ndev->irq, priv);
+
+		ucan->can.state = CAN_STATE_STOPPED;
+
+		break;
+	}
+
+	return 0;
+}
+
+static void *pciefd_alloc_tx_msg(struct peak_canfd_priv *ucan, u16 msg_size,
+				 int *room_left)
+{
+	struct pciefd_can *priv = (struct pciefd_can *)ucan;
+	struct pciefd_page *page = priv->tx_pages + priv->tx_page_index;
+	unsigned long flags;
+	void *msg;
+
+	spin_lock_irqsave(&priv->tx_lock, flags);
+
+	if (page->offset + msg_size > page->size) {
+		struct pciefd_tx_link *lk;
+
+		/* not enough space in this page: try another one */
+		if (!priv->tx_pages_free) {
+			spin_unlock_irqrestore(&priv->tx_lock, flags);
+
+			/* Tx overflow */
+			return NULL;
+		}
+
+		priv->tx_pages_free--;
+
+		/* keep address of the very last free slot of current page */
+		lk = page->vbase + page->offset;
+
+		/* next, move on a new free page */
+		priv->tx_page_index = (priv->tx_page_index + 1) %
+				      PCIEFD_TX_PAGE_COUNT;
+		page = priv->tx_pages + priv->tx_page_index;
+
+		/* put link record to this new page at the end of prev one */
+		lk->size = cpu_to_le16(sizeof(*lk));
+		lk->type = cpu_to_le16(CANFD_MSG_LNK_TX);
+		lk->laddr_lo = cpu_to_le32(page->lbase);
+
+#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
+		lk->laddr_hi = cpu_to_le32(page->lbase >> 32);
+#else
+		lk->laddr_hi = 0;
+#endif
+		/* next msgs will be put from the begininng of this new page */
+		page->offset = 0;
+	}
+
+	*room_left = priv->tx_pages_free * page->size;
+
+	spin_unlock_irqrestore(&priv->tx_lock, flags);
+
+	msg = page->vbase + page->offset;
+
+	/* give back room left in the tx ring */
+	*room_left += page->size - (page->offset + msg_size);
+
+	return msg;
+}
+
+static int pciefd_write_tx_msg(struct peak_canfd_priv *ucan,
+			       struct pucan_tx_msg *msg)
+{
+	struct pciefd_can *priv = (struct pciefd_can *)ucan;
+	struct pciefd_page *page = priv->tx_pages + priv->tx_page_index;
+
+	/* this slot is now reserved for writing the frame */
+	page->offset += le16_to_cpu(msg->size);
+
+	/* tell the board a frame has been written in Tx DMA area */
+	pciefd_can_writereg(priv, 1, PCIEFD_REG_CAN_TX_REQ_ACC);
+
+	return 0;
+}
+
+/* probe for CAN-FD channel #pciefd_board->can_count */
+static int pciefd_can_probe(struct pciefd_board *pciefd)
+{
+	struct net_device *ndev;
+	struct pciefd_can *priv;
+	u32 clk;
+	int err;
+
+	/* allocate the candev object with default isize of echo skbs ring */
+	ndev = alloc_peak_canfd_dev(sizeof(*priv), pciefd->can_count,
+				    PCIEFD_ECHO_SKB_MAX);
+	if (!ndev) {
+		dev_err(&pciefd->pci_dev->dev,
+			"failed to alloc candev object\n");
+		goto failure;
+	}
+
+	priv = netdev_priv(ndev);
+
+	/* fill-in candev private object: */
+
+	/* setup PCIe-FD own callbacks */
+	priv->ucan.pre_cmd = pciefd_pre_cmd;
+	priv->ucan.write_cmd = pciefd_write_cmd;
+	priv->ucan.post_cmd = pciefd_post_cmd;
+	priv->ucan.enable_tx_path = pciefd_enable_tx_path;
+	priv->ucan.alloc_tx_msg = pciefd_alloc_tx_msg;
+	priv->ucan.write_tx_msg = pciefd_write_tx_msg;
+
+	/* setup PCIe-FD own command buffer */
+	priv->ucan.cmd_buffer = &priv->pucan_cmd;
+	priv->ucan.cmd_maxlen = sizeof(priv->pucan_cmd);
+
+	priv->board = pciefd;
+
+	/* CAN config regs block address */
+	priv->reg_base = pciefd->reg_base + PCIEFD_CANX_OFF(priv->ucan.index);
+
+	/* allocate non-cacheable DMA'able 4KB memory area for Rx */
+	priv->rx_dma_vaddr = dmam_alloc_coherent(&pciefd->pci_dev->dev,
+						 PCIEFD_RX_DMA_SIZE,
+						 &priv->rx_dma_laddr,
+						 GFP_KERNEL);
+	if (!priv->rx_dma_vaddr) {
+		dev_err(&pciefd->pci_dev->dev,
+			"Rx dmam_alloc_coherent(%u) failure\n",
+			PCIEFD_RX_DMA_SIZE);
+		goto err_free_candev;
+	}
+
+	/* allocate non-cacheable DMA'able 4KB memory area for Tx */
+	priv->tx_dma_vaddr = dmam_alloc_coherent(&pciefd->pci_dev->dev,
+						 PCIEFD_TX_DMA_SIZE,
+						 &priv->tx_dma_laddr,
+						 GFP_KERNEL);
+	if (!priv->tx_dma_vaddr) {
+		dev_err(&pciefd->pci_dev->dev,
+			"Tx dmam_alloc_coherent(%u) failure\n",
+			PCIEFD_TX_DMA_SIZE);
+		goto err_free_candev;
+	}
+
+	/* CAN clock in RST mode */
+	pciefd_can_writereg(priv, CANFD_MISC_TS_RST, PCIEFD_REG_CAN_MISC);
+
+	/* read current clock value */
+	clk = pciefd_can_readreg(priv, PCIEFD_REG_CAN_CLK_SEL);
+	switch (clk) {
+	case CANFD_CLK_SEL_20MHZ:
+		priv->ucan.can.clock.freq = 20 * 1000 * 1000;
+		break;
+	case CANFD_CLK_SEL_24MHZ:
+		priv->ucan.can.clock.freq = 24 * 1000 * 1000;
+		break;
+	case CANFD_CLK_SEL_30MHZ:
+		priv->ucan.can.clock.freq = 30 * 1000 * 1000;
+		break;
+	case CANFD_CLK_SEL_40MHZ:
+		priv->ucan.can.clock.freq = 40 * 1000 * 1000;
+		break;
+	case CANFD_CLK_SEL_60MHZ:
+		priv->ucan.can.clock.freq = 60 * 1000 * 1000;
+		break;
+	default:
+		pciefd_can_writereg(priv, CANFD_CLK_SEL_80MHZ,
+				    PCIEFD_REG_CAN_CLK_SEL);
+
+		fallthrough;
+	case CANFD_CLK_SEL_80MHZ:
+		priv->ucan.can.clock.freq = 80 * 1000 * 1000;
+		break;
+	}
+
+	ndev->irq = pciefd->pci_dev->irq;
+
+	SET_NETDEV_DEV(ndev, &pciefd->pci_dev->dev);
+
+	err = register_candev(ndev);
+	if (err) {
+		dev_err(&pciefd->pci_dev->dev,
+			"couldn't register CAN device: %d\n", err);
+		goto err_free_candev;
+	}
+
+	spin_lock_init(&priv->tx_lock);
+
+	/* save the object address in the board structure */
+	pciefd->can[pciefd->can_count] = priv;
+
+	dev_info(&pciefd->pci_dev->dev, "%s at reg_base=0x%p irq=%d\n",
+		 ndev->name, priv->reg_base, ndev->irq);
+
+	return 0;
+
+err_free_candev:
+	free_candev(ndev);
+
+failure:
+	return -ENOMEM;
+}
+
+/* remove a CAN-FD channel by releasing all of its resources */
+static void pciefd_can_remove(struct pciefd_can *priv)
+{
+	/* unregister (close) the can device to go back to RST mode first */
+	unregister_candev(priv->ucan.ndev);
+
+	/* finally, free the candev object */
+	free_candev(priv->ucan.ndev);
+}
+
+/* remove all CAN-FD channels by releasing their own resources */
+static void pciefd_can_remove_all(struct pciefd_board *pciefd)
+{
+	while (pciefd->can_count > 0)
+		pciefd_can_remove(pciefd->can[--pciefd->can_count]);
+}
+
+/* probe for the entire device */
+static int peak_pciefd_probe(struct pci_dev *pdev,
+			     const struct pci_device_id *ent)
+{
+	struct pciefd_board *pciefd;
+	int err, can_count;
+	u16 sub_sys_id;
+	u8 hw_ver_major;
+	u8 hw_ver_minor;
+	u8 hw_ver_sub;
+	u32 v2;
+
+	err = pci_enable_device(pdev);
+	if (err)
+		return err;
+	err = pci_request_regions(pdev, PCIEFD_DRV_NAME);
+	if (err)
+		goto err_disable_pci;
+
+	/* the number of channels depends on sub-system id */
+	err = pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &sub_sys_id);
+	if (err)
+		goto err_release_regions;
+
+	dev_dbg(&pdev->dev, "probing device %04x:%04x:%04x\n",
+		pdev->vendor, pdev->device, sub_sys_id);
+
+	if (sub_sys_id >= 0x0012)
+		can_count = 4;
+	else if (sub_sys_id >= 0x0010)
+		can_count = 3;
+	else if (sub_sys_id >= 0x0004)
+		can_count = 2;
+	else
+		can_count = 1;
+
+	/* allocate board structure object */
+	pciefd = devm_kzalloc(&pdev->dev, struct_size(pciefd, can, can_count),
+			      GFP_KERNEL);
+	if (!pciefd) {
+		err = -ENOMEM;
+		goto err_release_regions;
+	}
+
+	/* initialize the board structure */
+	pciefd->pci_dev = pdev;
+	spin_lock_init(&pciefd->cmd_lock);
+
+	/* save the PCI BAR0 virtual address for further system regs access */
+	pciefd->reg_base = pci_iomap(pdev, 0, PCIEFD_BAR0_SIZE);
+	if (!pciefd->reg_base) {
+		dev_err(&pdev->dev, "failed to map PCI resource #0\n");
+		err = -ENOMEM;
+		goto err_release_regions;
+	}
+
+	/* read the firmware version number */
+	v2 = pciefd_sys_readreg(pciefd, PCIEFD_REG_SYS_VER2);
+
+	hw_ver_major = (v2 & 0x0000f000) >> 12;
+	hw_ver_minor = (v2 & 0x00000f00) >> 8;
+	hw_ver_sub = (v2 & 0x000000f0) >> 4;
+
+	dev_info(&pdev->dev,
+		 "%ux CAN-FD PCAN-PCIe FPGA v%u.%u.%u:\n", can_count,
+		 hw_ver_major, hw_ver_minor, hw_ver_sub);
+
+#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
+	/* FW < v3.3.0 DMA logic doesn't handle correctly the mix of 32-bit and
+	 * 64-bit logical addresses: this workaround forces usage of 32-bit
+	 * DMA addresses only when such a fw is detected.
+	 */
+	if (PCIEFD_FW_VERSION(hw_ver_major, hw_ver_minor, hw_ver_sub) <
+	    PCIEFD_FW_VERSION(3, 3, 0)) {
+		err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+		if (err)
+			dev_warn(&pdev->dev,
+				 "warning: can't set DMA mask %llxh (err %d)\n",
+				 DMA_BIT_MASK(32), err);
+	}
+#endif
+
+	/* stop system clock */
+	pciefd_sys_writereg(pciefd, PCIEFD_SYS_CTL_CLK_EN,
+			    PCIEFD_REG_SYS_CTL_CLR);
+
+	pci_set_master(pdev);
+
+	/* create now the corresponding channels objects */
+	while (pciefd->can_count < can_count) {
+		err = pciefd_can_probe(pciefd);
+		if (err)
+			goto err_free_canfd;
+
+		pciefd->can_count++;
+	}
+
+	/* set system timestamps counter in RST mode */
+	pciefd_sys_writereg(pciefd, PCIEFD_SYS_CTL_TS_RST,
+			    PCIEFD_REG_SYS_CTL_SET);
+
+	/* wait a bit (read cycle) */
+	(void)pciefd_sys_readreg(pciefd, PCIEFD_REG_SYS_VER1);
+
+	/* free all clocks */
+	pciefd_sys_writereg(pciefd, PCIEFD_SYS_CTL_TS_RST,
+			    PCIEFD_REG_SYS_CTL_CLR);
+
+	/* start system clock */
+	pciefd_sys_writereg(pciefd, PCIEFD_SYS_CTL_CLK_EN,
+			    PCIEFD_REG_SYS_CTL_SET);
+
+	/* remember the board structure address in the device user data */
+	pci_set_drvdata(pdev, pciefd);
+
+	return 0;
+
+err_free_canfd:
+	pciefd_can_remove_all(pciefd);
+
+	pci_iounmap(pdev, pciefd->reg_base);
+
+err_release_regions:
+	pci_release_regions(pdev);
+
+err_disable_pci:
+	pci_disable_device(pdev);
+
+	/* pci_xxx_config_word() return positive PCIBIOS_xxx error codes while
+	 * the probe() function must return a negative errno in case of failure
+	 * (err is unchanged if negative)
+	 */
+	return pcibios_err_to_errno(err);
+}
+
+/* free the board structure object, as well as its resources: */
+static void peak_pciefd_remove(struct pci_dev *pdev)
+{
+	struct pciefd_board *pciefd = pci_get_drvdata(pdev);
+
+	/* release CAN-FD channels resources */
+	pciefd_can_remove_all(pciefd);
+
+	pci_iounmap(pdev, pciefd->reg_base);
+
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+}
+
+static struct pci_driver peak_pciefd_driver = {
+	.name = PCIEFD_DRV_NAME,
+	.id_table = peak_pciefd_tbl,
+	.probe = peak_pciefd_probe,
+	.remove = peak_pciefd_remove,
+};
+
+module_pci_driver(peak_pciefd_driver);