Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 815 insertions, 0 deletions

diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h b/drivers/net/dsa/microchip/ksz8795_reg.h
new file mode 100644
index 000000000..7a57c6088
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz8795_reg.h
@@ -0,0 +1,815 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Microchip KSZ8795 register definitions
+ *
+ * Copyright (c) 2017 Microchip Technology Inc.
+ *	Tristram Ha <Tristram.Ha@microchip.com>
+ */
+
+#ifndef __KSZ8795_REG_H
+#define __KSZ8795_REG_H
+
+#define KS_PORT_M			0x1F
+
+#define KS_PRIO_M			0x3
+#define KS_PRIO_S			2
+
+#define SW_REVISION_M			0x0E
+#define SW_REVISION_S			1
+
+#define KSZ8863_REG_SW_RESET		0x43
+
+#define KSZ8863_GLOBAL_SOFTWARE_RESET	BIT(4)
+#define KSZ8863_PCS_RESET		BIT(0)
+
+#define REG_SW_CTRL_0			0x02
+
+#define SW_NEW_BACKOFF			BIT(7)
+#define SW_GLOBAL_RESET			BIT(6)
+#define SW_FLUSH_DYN_MAC_TABLE		BIT(5)
+#define SW_FLUSH_STA_MAC_TABLE		BIT(4)
+#define SW_LINK_AUTO_AGING		BIT(0)
+
+#define REG_SW_CTRL_1			0x03
+
+#define SW_HUGE_PACKET			BIT(6)
+#define SW_TX_FLOW_CTRL_DISABLE		BIT(5)
+#define SW_RX_FLOW_CTRL_DISABLE		BIT(4)
+#define SW_CHECK_LENGTH			BIT(3)
+#define SW_AGING_ENABLE			BIT(2)
+#define SW_FAST_AGING			BIT(1)
+#define SW_AGGR_BACKOFF			BIT(0)
+
+#define REG_SW_CTRL_2			0x04
+
+#define UNICAST_VLAN_BOUNDARY		BIT(7)
+#define SW_BACK_PRESSURE		BIT(5)
+#define FAIR_FLOW_CTRL			BIT(4)
+#define NO_EXC_COLLISION_DROP		BIT(3)
+#define SW_LEGAL_PACKET_DISABLE		BIT(1)
+
+#define KSZ8863_HUGE_PACKET_ENABLE	BIT(2)
+#define KSZ8863_LEGAL_PACKET_ENABLE	BIT(1)
+
+#define REG_SW_CTRL_3			0x05
+ #define WEIGHTED_FAIR_QUEUE_ENABLE	BIT(3)
+
+#define SW_VLAN_ENABLE			BIT(7)
+#define SW_IGMP_SNOOP			BIT(6)
+#define SW_MIRROR_RX_TX			BIT(0)
+
+#define REG_SW_CTRL_4			0x06
+
+#define SW_HALF_DUPLEX_FLOW_CTRL	BIT(7)
+#define SW_HALF_DUPLEX			BIT(6)
+#define SW_FLOW_CTRL			BIT(5)
+#define SW_10_MBIT			BIT(4)
+#define SW_REPLACE_VID			BIT(3)
+
+#define REG_SW_CTRL_5			0x07
+
+#define REG_SW_CTRL_6			0x08
+
+#define SW_MIB_COUNTER_FLUSH		BIT(7)
+#define SW_MIB_COUNTER_FREEZE		BIT(6)
+#define SW_MIB_COUNTER_CTRL_ENABLE	KS_PORT_M
+
+#define REG_SW_CTRL_9			0x0B
+
+#define SPI_CLK_125_MHZ			0x80
+#define SPI_CLK_62_5_MHZ		0x40
+#define SPI_CLK_31_25_MHZ		0x00
+
+#define SW_LED_MODE_M			0x3
+#define SW_LED_MODE_S			4
+#define SW_LED_LINK_ACT_SPEED		0
+#define SW_LED_LINK_ACT			1
+#define SW_LED_LINK_ACT_DUPLEX		2
+#define SW_LED_LINK_DUPLEX		3
+
+#define REG_SW_CTRL_10			0x0C
+
+#define SW_PASS_PAUSE			BIT(0)
+
+#define REG_SW_CTRL_11			0x0D
+
+#define REG_POWER_MANAGEMENT_1		0x0E
+
+#define SW_PLL_POWER_DOWN		BIT(5)
+#define SW_POWER_MANAGEMENT_MODE_M	0x3
+#define SW_POWER_MANAGEMENT_MODE_S	3
+#define SW_POWER_NORMAL			0
+#define SW_ENERGY_DETECTION		1
+#define SW_SOFTWARE_POWER_DOWN		2
+
+#define REG_POWER_MANAGEMENT_2		0x0F
+
+#define REG_PORT_1_CTRL_0		0x10
+#define REG_PORT_2_CTRL_0		0x20
+#define REG_PORT_3_CTRL_0		0x30
+#define REG_PORT_4_CTRL_0		0x40
+#define REG_PORT_5_CTRL_0		0x50
+
+#define PORT_BROADCAST_STORM		BIT(7)
+#define PORT_DIFFSERV_ENABLE		BIT(6)
+#define PORT_802_1P_ENABLE		BIT(5)
+#define PORT_BASED_PRIO_S		3
+#define PORT_BASED_PRIO_M		KS_PRIO_M
+#define PORT_BASED_PRIO_0		0
+#define PORT_BASED_PRIO_1		1
+#define PORT_BASED_PRIO_2		2
+#define PORT_BASED_PRIO_3		3
+#define PORT_INSERT_TAG			BIT(2)
+#define PORT_REMOVE_TAG			BIT(1)
+#define PORT_QUEUE_SPLIT_L		BIT(0)
+
+#define REG_PORT_1_CTRL_1		0x11
+#define REG_PORT_2_CTRL_1		0x21
+#define REG_PORT_3_CTRL_1		0x31
+#define REG_PORT_4_CTRL_1		0x41
+#define REG_PORT_5_CTRL_1		0x51
+
+#define PORT_MIRROR_SNIFFER		BIT(7)
+#define PORT_MIRROR_RX			BIT(6)
+#define PORT_MIRROR_TX			BIT(5)
+#define PORT_VLAN_MEMBERSHIP		KS_PORT_M
+
+#define REG_PORT_1_CTRL_2		0x12
+#define REG_PORT_2_CTRL_2		0x22
+#define REG_PORT_3_CTRL_2		0x32
+#define REG_PORT_4_CTRL_2		0x42
+#define REG_PORT_5_CTRL_2		0x52
+
+#define PORT_INGRESS_FILTER		BIT(6)
+#define PORT_DISCARD_NON_VID		BIT(5)
+#define PORT_FORCE_FLOW_CTRL		BIT(4)
+#define PORT_BACK_PRESSURE		BIT(3)
+
+#define REG_PORT_1_CTRL_3		0x13
+#define REG_PORT_2_CTRL_3		0x23
+#define REG_PORT_3_CTRL_3		0x33
+#define REG_PORT_4_CTRL_3		0x43
+#define REG_PORT_5_CTRL_3		0x53
+#define REG_PORT_1_CTRL_4		0x14
+#define REG_PORT_2_CTRL_4		0x24
+#define REG_PORT_3_CTRL_4		0x34
+#define REG_PORT_4_CTRL_4		0x44
+#define REG_PORT_5_CTRL_4		0x54
+
+#define PORT_DEFAULT_VID		0x0001
+
+#define REG_PORT_1_CTRL_5		0x15
+#define REG_PORT_2_CTRL_5		0x25
+#define REG_PORT_3_CTRL_5		0x35
+#define REG_PORT_4_CTRL_5		0x45
+#define REG_PORT_5_CTRL_5		0x55
+
+#define PORT_ACL_ENABLE			BIT(2)
+#define PORT_AUTHEN_MODE		0x3
+#define PORT_AUTHEN_PASS		0
+#define PORT_AUTHEN_BLOCK		1
+#define PORT_AUTHEN_TRAP		2
+
+#define REG_PORT_5_CTRL_6		0x56
+
+#define PORT_MII_INTERNAL_CLOCK		BIT(7)
+#define PORT_GMII_MAC_MODE		BIT(2)
+
+#define REG_PORT_1_CTRL_7		0x17
+#define REG_PORT_2_CTRL_7		0x27
+#define REG_PORT_3_CTRL_7		0x37
+#define REG_PORT_4_CTRL_7		0x47
+
+#define PORT_AUTO_NEG_ASYM_PAUSE	BIT(5)
+#define PORT_AUTO_NEG_SYM_PAUSE		BIT(4)
+#define PORT_AUTO_NEG_100BTX_FD		BIT(3)
+#define PORT_AUTO_NEG_100BTX		BIT(2)
+#define PORT_AUTO_NEG_10BT_FD		BIT(1)
+#define PORT_AUTO_NEG_10BT		BIT(0)
+
+#define REG_PORT_1_STATUS_0		0x18
+#define REG_PORT_2_STATUS_0		0x28
+#define REG_PORT_3_STATUS_0		0x38
+#define REG_PORT_4_STATUS_0		0x48
+
+/* For KSZ8765. */
+#define PORT_REMOTE_ASYM_PAUSE		BIT(5)
+#define PORT_REMOTE_SYM_PAUSE		BIT(4)
+#define PORT_REMOTE_100BTX_FD		BIT(3)
+#define PORT_REMOTE_100BTX		BIT(2)
+#define PORT_REMOTE_10BT_FD		BIT(1)
+#define PORT_REMOTE_10BT		BIT(0)
+
+#define REG_PORT_1_STATUS_1		0x19
+#define REG_PORT_2_STATUS_1		0x29
+#define REG_PORT_3_STATUS_1		0x39
+#define REG_PORT_4_STATUS_1		0x49
+
+#define PORT_HP_MDIX			BIT(7)
+#define PORT_REVERSED_POLARITY		BIT(5)
+#define PORT_TX_FLOW_CTRL		BIT(4)
+#define PORT_RX_FLOW_CTRL		BIT(3)
+#define PORT_STAT_SPEED_100MBIT		BIT(2)
+#define PORT_STAT_FULL_DUPLEX		BIT(1)
+
+#define PORT_REMOTE_FAULT		BIT(0)
+
+#define REG_PORT_1_LINK_MD_CTRL		0x1A
+#define REG_PORT_2_LINK_MD_CTRL		0x2A
+#define REG_PORT_3_LINK_MD_CTRL		0x3A
+#define REG_PORT_4_LINK_MD_CTRL		0x4A
+
+#define PORT_CABLE_10M_SHORT		BIT(7)
+#define PORT_CABLE_DIAG_RESULT_M	GENMASK(6, 5)
+#define PORT_CABLE_DIAG_RESULT_S	5
+#define PORT_CABLE_STAT_NORMAL		0
+#define PORT_CABLE_STAT_OPEN		1
+#define PORT_CABLE_STAT_SHORT		2
+#define PORT_CABLE_STAT_FAILED		3
+#define PORT_START_CABLE_DIAG		BIT(4)
+#define PORT_FORCE_LINK			BIT(3)
+#define PORT_POWER_SAVING		BIT(2)
+#define PORT_PHY_REMOTE_LOOPBACK	BIT(1)
+#define PORT_CABLE_FAULT_COUNTER_H	0x01
+
+#define REG_PORT_1_LINK_MD_RESULT	0x1B
+#define REG_PORT_2_LINK_MD_RESULT	0x2B
+#define REG_PORT_3_LINK_MD_RESULT	0x3B
+#define REG_PORT_4_LINK_MD_RESULT	0x4B
+
+#define PORT_CABLE_FAULT_COUNTER_L	0xFF
+#define PORT_CABLE_FAULT_COUNTER	0x1FF
+
+#define REG_PORT_1_CTRL_9		0x1C
+#define REG_PORT_2_CTRL_9		0x2C
+#define REG_PORT_3_CTRL_9		0x3C
+#define REG_PORT_4_CTRL_9		0x4C
+
+#define PORT_AUTO_NEG_ENABLE		BIT(7)
+#define PORT_AUTO_NEG_DISABLE		BIT(7)
+#define PORT_FORCE_100_MBIT		BIT(6)
+#define PORT_FORCE_FULL_DUPLEX		BIT(5)
+
+#define REG_PORT_1_CTRL_10		0x1D
+#define REG_PORT_2_CTRL_10		0x2D
+#define REG_PORT_3_CTRL_10		0x3D
+#define REG_PORT_4_CTRL_10		0x4D
+
+#define PORT_LED_OFF			BIT(7)
+#define PORT_TX_DISABLE			BIT(6)
+#define PORT_AUTO_NEG_RESTART		BIT(5)
+#define PORT_POWER_DOWN			BIT(3)
+#define PORT_AUTO_MDIX_DISABLE		BIT(2)
+#define PORT_FORCE_MDIX			BIT(1)
+#define PORT_MAC_LOOPBACK		BIT(0)
+
+#define REG_PORT_1_STATUS_2		0x1E
+#define REG_PORT_2_STATUS_2		0x2E
+#define REG_PORT_3_STATUS_2		0x3E
+#define REG_PORT_4_STATUS_2		0x4E
+
+#define PORT_MDIX_STATUS		BIT(7)
+#define PORT_AUTO_NEG_COMPLETE		BIT(6)
+#define PORT_STAT_LINK_GOOD		BIT(5)
+
+#define REG_PORT_1_STATUS_3		0x1F
+#define REG_PORT_2_STATUS_3		0x2F
+#define REG_PORT_3_STATUS_3		0x3F
+#define REG_PORT_4_STATUS_3		0x4F
+
+#define PORT_PHY_LOOPBACK		BIT(7)
+#define PORT_PHY_ISOLATE		BIT(5)
+#define PORT_PHY_SOFT_RESET		BIT(4)
+#define PORT_PHY_FORCE_LINK		BIT(3)
+#define PORT_PHY_MODE_M			0x7
+#define PHY_MODE_IN_AUTO_NEG		1
+#define PHY_MODE_10BT_HALF		2
+#define PHY_MODE_100BT_HALF		3
+#define PHY_MODE_10BT_FULL		5
+#define PHY_MODE_100BT_FULL		6
+#define PHY_MODE_ISOLDATE		7
+
+#define REG_PORT_CTRL_0			0x00
+#define REG_PORT_CTRL_1			0x01
+#define REG_PORT_CTRL_2			0x02
+#define REG_PORT_CTRL_VID		0x03
+
+#define REG_PORT_CTRL_5			0x05
+
+#define REG_PORT_STATUS_1		0x09
+#define REG_PORT_LINK_MD_CTRL		0x0A
+#define REG_PORT_LINK_MD_RESULT		0x0B
+#define REG_PORT_CTRL_9			0x0C
+#define REG_PORT_CTRL_10		0x0D
+#define REG_PORT_STATUS_3		0x0F
+
+#define REG_PORT_CTRL_12		0xA0
+#define REG_PORT_CTRL_13		0xA1
+#define REG_PORT_RATE_CTRL_3		0xA2
+#define REG_PORT_RATE_CTRL_2		0xA3
+#define REG_PORT_RATE_CTRL_1		0xA4
+#define REG_PORT_RATE_CTRL_0		0xA5
+#define REG_PORT_RATE_LIMIT		0xA6
+#define REG_PORT_IN_RATE_0		0xA7
+#define REG_PORT_IN_RATE_1		0xA8
+#define REG_PORT_IN_RATE_2		0xA9
+#define REG_PORT_IN_RATE_3		0xAA
+#define REG_PORT_OUT_RATE_0		0xAB
+#define REG_PORT_OUT_RATE_1		0xAC
+#define REG_PORT_OUT_RATE_2		0xAD
+#define REG_PORT_OUT_RATE_3		0xAE
+
+#define PORT_CTRL_ADDR(port, addr)		\
+	((addr) + REG_PORT_1_CTRL_0 + (port) *	\
+		(REG_PORT_2_CTRL_0 - REG_PORT_1_CTRL_0))
+
+#define REG_SW_MAC_ADDR_0		0x68
+#define REG_SW_MAC_ADDR_1		0x69
+#define REG_SW_MAC_ADDR_2		0x6A
+#define REG_SW_MAC_ADDR_3		0x6B
+#define REG_SW_MAC_ADDR_4		0x6C
+#define REG_SW_MAC_ADDR_5		0x6D
+
+#define TABLE_EXT_SELECT_S		5
+#define TABLE_EEE_V			1
+#define TABLE_ACL_V			2
+#define TABLE_PME_V			4
+#define TABLE_LINK_MD_V			5
+#define TABLE_EEE			(TABLE_EEE_V << TABLE_EXT_SELECT_S)
+#define TABLE_ACL			(TABLE_ACL_V << TABLE_EXT_SELECT_S)
+#define TABLE_PME			(TABLE_PME_V << TABLE_EXT_SELECT_S)
+#define TABLE_LINK_MD			(TABLE_LINK_MD << TABLE_EXT_SELECT_S)
+#define TABLE_READ			BIT(4)
+#define TABLE_SELECT_S			2
+#define TABLE_STATIC_MAC_V		0
+#define TABLE_VLAN_V			1
+#define TABLE_DYNAMIC_MAC_V		2
+#define TABLE_MIB_V			3
+#define TABLE_STATIC_MAC		(TABLE_STATIC_MAC_V << TABLE_SELECT_S)
+#define TABLE_VLAN			(TABLE_VLAN_V << TABLE_SELECT_S)
+#define TABLE_DYNAMIC_MAC		(TABLE_DYNAMIC_MAC_V << TABLE_SELECT_S)
+#define TABLE_MIB			(TABLE_MIB_V << TABLE_SELECT_S)
+
+#define REG_IND_CTRL_1			0x6F
+
+#define TABLE_ENTRY_MASK		0x03FF
+#define TABLE_EXT_ENTRY_MASK		0x0FFF
+
+#define REG_IND_DATA_5			0x73
+#define REG_IND_DATA_2			0x76
+#define REG_IND_DATA_1			0x77
+#define REG_IND_DATA_0			0x78
+
+#define REG_IND_DATA_PME_EEE_ACL	0xA0
+
+#define REG_INT_STATUS			0x7C
+#define REG_INT_ENABLE			0x7D
+
+#define INT_PME				BIT(4)
+
+#define REG_ACL_INT_STATUS		0x7E
+#define REG_ACL_INT_ENABLE		0x7F
+
+#define INT_PORT_5			BIT(4)
+#define INT_PORT_4			BIT(3)
+#define INT_PORT_3			BIT(2)
+#define INT_PORT_2			BIT(1)
+#define INT_PORT_1			BIT(0)
+
+#define INT_PORT_ALL			\
+	(INT_PORT_5 | INT_PORT_4 | INT_PORT_3 | INT_PORT_2 | INT_PORT_1)
+
+#define REG_SW_CTRL_12			0x80
+#define REG_SW_CTRL_13			0x81
+
+#define SWITCH_802_1P_MASK		3
+#define SWITCH_802_1P_BASE		3
+#define SWITCH_802_1P_SHIFT		2
+
+#define SW_802_1P_MAP_M			KS_PRIO_M
+#define SW_802_1P_MAP_S			KS_PRIO_S
+
+#define REG_SWITCH_CTRL_14		0x82
+
+#define SW_PRIO_MAPPING_M		KS_PRIO_M
+#define SW_PRIO_MAPPING_S		6
+#define SW_PRIO_MAP_3_HI		0
+#define SW_PRIO_MAP_2_HI		2
+#define SW_PRIO_MAP_0_LO		3
+
+#define REG_SW_CTRL_15			0x83
+#define REG_SW_CTRL_16			0x84
+#define REG_SW_CTRL_17			0x85
+#define REG_SW_CTRL_18			0x86
+
+#define SW_SELF_ADDR_FILTER_ENABLE	BIT(6)
+
+#define REG_SW_UNK_UCAST_CTRL		0x83
+#define REG_SW_UNK_MCAST_CTRL		0x84
+#define REG_SW_UNK_VID_CTRL		0x85
+#define REG_SW_UNK_IP_MCAST_CTRL	0x86
+
+#define SW_UNK_FWD_ENABLE		BIT(5)
+#define SW_UNK_FWD_MAP			KS_PORT_M
+
+#define REG_SW_CTRL_19			0x87
+
+#define SW_IN_RATE_LIMIT_PERIOD_M	0x3
+#define SW_IN_RATE_LIMIT_PERIOD_S	4
+#define SW_IN_RATE_LIMIT_16_MS		0
+#define SW_IN_RATE_LIMIT_64_MS		1
+#define SW_IN_RATE_LIMIT_256_MS		2
+#define SW_OUT_RATE_LIMIT_QUEUE_BASED	BIT(3)
+#define SW_INS_TAG_ENABLE		BIT(2)
+
+#define REG_TOS_PRIO_CTRL_0		0x90
+#define REG_TOS_PRIO_CTRL_1		0x91
+#define REG_TOS_PRIO_CTRL_2		0x92
+#define REG_TOS_PRIO_CTRL_3		0x93
+#define REG_TOS_PRIO_CTRL_4		0x94
+#define REG_TOS_PRIO_CTRL_5		0x95
+#define REG_TOS_PRIO_CTRL_6		0x96
+#define REG_TOS_PRIO_CTRL_7		0x97
+#define REG_TOS_PRIO_CTRL_8		0x98
+#define REG_TOS_PRIO_CTRL_9		0x99
+#define REG_TOS_PRIO_CTRL_10		0x9A
+#define REG_TOS_PRIO_CTRL_11		0x9B
+#define REG_TOS_PRIO_CTRL_12		0x9C
+#define REG_TOS_PRIO_CTRL_13		0x9D
+#define REG_TOS_PRIO_CTRL_14		0x9E
+#define REG_TOS_PRIO_CTRL_15		0x9F
+
+#define TOS_PRIO_M			KS_PRIO_M
+#define TOS_PRIO_S			KS_PRIO_S
+
+#define REG_SW_CTRL_20			0xA3
+
+#define SW_GMII_DRIVE_STRENGTH_S	4
+#define SW_DRIVE_STRENGTH_M		0x7
+#define SW_DRIVE_STRENGTH_2MA		0
+#define SW_DRIVE_STRENGTH_4MA		1
+#define SW_DRIVE_STRENGTH_8MA		2
+#define SW_DRIVE_STRENGTH_12MA		3
+#define SW_DRIVE_STRENGTH_16MA		4
+#define SW_DRIVE_STRENGTH_20MA		5
+#define SW_DRIVE_STRENGTH_24MA		6
+#define SW_DRIVE_STRENGTH_28MA		7
+#define SW_MII_DRIVE_STRENGTH_S		0
+
+#define REG_SW_CTRL_21			0xA4
+
+#define SW_IPV6_MLD_OPTION		BIT(3)
+#define SW_IPV6_MLD_SNOOP		BIT(2)
+
+#define REG_PORT_1_CTRL_12		0xB0
+#define REG_PORT_2_CTRL_12		0xC0
+#define REG_PORT_3_CTRL_12		0xD0
+#define REG_PORT_4_CTRL_12		0xE0
+#define REG_PORT_5_CTRL_12		0xF0
+
+#define PORT_PASS_ALL			BIT(6)
+#define PORT_INS_TAG_FOR_PORT_5_S	3
+#define PORT_INS_TAG_FOR_PORT_5		BIT(3)
+#define PORT_INS_TAG_FOR_PORT_4		BIT(2)
+#define PORT_INS_TAG_FOR_PORT_3		BIT(1)
+#define PORT_INS_TAG_FOR_PORT_2		BIT(0)
+
+#define REG_PORT_1_CTRL_13		0xB1
+#define REG_PORT_2_CTRL_13		0xC1
+#define REG_PORT_3_CTRL_13		0xD1
+#define REG_PORT_4_CTRL_13		0xE1
+#define REG_PORT_5_CTRL_13		0xF1
+
+#define PORT_QUEUE_SPLIT_H		BIT(1)
+#define PORT_QUEUE_SPLIT_1		0
+#define PORT_QUEUE_SPLIT_2		1
+#define PORT_QUEUE_SPLIT_4		2
+#define PORT_DROP_TAG			BIT(0)
+
+#define REG_PORT_1_CTRL_14		0xB2
+#define REG_PORT_2_CTRL_14		0xC2
+#define REG_PORT_3_CTRL_14		0xD2
+#define REG_PORT_4_CTRL_14		0xE2
+#define REG_PORT_5_CTRL_14		0xF2
+#define REG_PORT_1_CTRL_15		0xB3
+#define REG_PORT_2_CTRL_15		0xC3
+#define REG_PORT_3_CTRL_15		0xD3
+#define REG_PORT_4_CTRL_15		0xE3
+#define REG_PORT_5_CTRL_15		0xF3
+#define REG_PORT_1_CTRL_16		0xB4
+#define REG_PORT_2_CTRL_16		0xC4
+#define REG_PORT_3_CTRL_16		0xD4
+#define REG_PORT_4_CTRL_16		0xE4
+#define REG_PORT_5_CTRL_16		0xF4
+#define REG_PORT_1_CTRL_17		0xB5
+#define REG_PORT_2_CTRL_17		0xC5
+#define REG_PORT_3_CTRL_17		0xD5
+#define REG_PORT_4_CTRL_17		0xE5
+#define REG_PORT_5_CTRL_17		0xF5
+
+#define REG_PORT_1_RATE_CTRL_3		0xB2
+#define REG_PORT_1_RATE_CTRL_2		0xB3
+#define REG_PORT_1_RATE_CTRL_1		0xB4
+#define REG_PORT_1_RATE_CTRL_0		0xB5
+#define REG_PORT_2_RATE_CTRL_3		0xC2
+#define REG_PORT_2_RATE_CTRL_2		0xC3
+#define REG_PORT_2_RATE_CTRL_1		0xC4
+#define REG_PORT_2_RATE_CTRL_0		0xC5
+#define REG_PORT_3_RATE_CTRL_3		0xD2
+#define REG_PORT_3_RATE_CTRL_2		0xD3
+#define REG_PORT_3_RATE_CTRL_1		0xD4
+#define REG_PORT_3_RATE_CTRL_0		0xD5
+#define REG_PORT_4_RATE_CTRL_3		0xE2
+#define REG_PORT_4_RATE_CTRL_2		0xE3
+#define REG_PORT_4_RATE_CTRL_1		0xE4
+#define REG_PORT_4_RATE_CTRL_0		0xE5
+#define REG_PORT_5_RATE_CTRL_3		0xF2
+#define REG_PORT_5_RATE_CTRL_2		0xF3
+#define REG_PORT_5_RATE_CTRL_1		0xF4
+#define REG_PORT_5_RATE_CTRL_0		0xF5
+
+#define RATE_CTRL_ENABLE		BIT(7)
+#define RATE_RATIO_M			(BIT(7) - 1)
+
+#define PORT_OUT_RATE_ENABLE		BIT(7)
+
+#define REG_PORT_1_RATE_LIMIT		0xB6
+#define REG_PORT_2_RATE_LIMIT		0xC6
+#define REG_PORT_3_RATE_LIMIT		0xD6
+#define REG_PORT_4_RATE_LIMIT		0xE6
+#define REG_PORT_5_RATE_LIMIT		0xF6
+
+#define PORT_IN_PORT_BASED_S		6
+#define PORT_RATE_PACKET_BASED_S	5
+#define PORT_IN_FLOW_CTRL_S		4
+#define PORT_IN_LIMIT_MODE_M		0x3
+#define PORT_IN_LIMIT_MODE_S		2
+#define PORT_COUNT_IFG_S		1
+#define PORT_COUNT_PREAMBLE_S		0
+#define PORT_IN_PORT_BASED		BIT(PORT_IN_PORT_BASED_S)
+#define PORT_RATE_PACKET_BASED		BIT(PORT_RATE_PACKET_BASED_S)
+#define PORT_IN_FLOW_CTRL		BIT(PORT_IN_FLOW_CTRL_S)
+#define PORT_IN_ALL			0
+#define PORT_IN_UNICAST			1
+#define PORT_IN_MULTICAST		2
+#define PORT_IN_BROADCAST		3
+#define PORT_COUNT_IFG			BIT(PORT_COUNT_IFG_S)
+#define PORT_COUNT_PREAMBLE		BIT(PORT_COUNT_PREAMBLE_S)
+
+#define REG_PORT_1_IN_RATE_0		0xB7
+#define REG_PORT_2_IN_RATE_0		0xC7
+#define REG_PORT_3_IN_RATE_0		0xD7
+#define REG_PORT_4_IN_RATE_0		0xE7
+#define REG_PORT_5_IN_RATE_0		0xF7
+#define REG_PORT_1_IN_RATE_1		0xB8
+#define REG_PORT_2_IN_RATE_1		0xC8
+#define REG_PORT_3_IN_RATE_1		0xD8
+#define REG_PORT_4_IN_RATE_1		0xE8
+#define REG_PORT_5_IN_RATE_1		0xF8
+#define REG_PORT_1_IN_RATE_2		0xB9
+#define REG_PORT_2_IN_RATE_2		0xC9
+#define REG_PORT_3_IN_RATE_2		0xD9
+#define REG_PORT_4_IN_RATE_2		0xE9
+#define REG_PORT_5_IN_RATE_2		0xF9
+#define REG_PORT_1_IN_RATE_3		0xBA
+#define REG_PORT_2_IN_RATE_3		0xCA
+#define REG_PORT_3_IN_RATE_3		0xDA
+#define REG_PORT_4_IN_RATE_3		0xEA
+#define REG_PORT_5_IN_RATE_3		0xFA
+
+#define PORT_IN_RATE_ENABLE		BIT(7)
+#define PORT_RATE_LIMIT_M		(BIT(7) - 1)
+
+#define REG_PORT_1_OUT_RATE_0		0xBB
+#define REG_PORT_2_OUT_RATE_0		0xCB
+#define REG_PORT_3_OUT_RATE_0		0xDB
+#define REG_PORT_4_OUT_RATE_0		0xEB
+#define REG_PORT_5_OUT_RATE_0		0xFB
+#define REG_PORT_1_OUT_RATE_1		0xBC
+#define REG_PORT_2_OUT_RATE_1		0xCC
+#define REG_PORT_3_OUT_RATE_1		0xDC
+#define REG_PORT_4_OUT_RATE_1		0xEC
+#define REG_PORT_5_OUT_RATE_1		0xFC
+#define REG_PORT_1_OUT_RATE_2		0xBD
+#define REG_PORT_2_OUT_RATE_2		0xCD
+#define REG_PORT_3_OUT_RATE_2		0xDD
+#define REG_PORT_4_OUT_RATE_2		0xED
+#define REG_PORT_5_OUT_RATE_2		0xFD
+#define REG_PORT_1_OUT_RATE_3		0xBE
+#define REG_PORT_2_OUT_RATE_3		0xCE
+#define REG_PORT_3_OUT_RATE_3		0xDE
+#define REG_PORT_4_OUT_RATE_3		0xEE
+#define REG_PORT_5_OUT_RATE_3		0xFE
+
+/* 88x3 specific */
+
+#define REG_SW_INSERT_SRC_PVID		0xC2
+
+/* PME */
+
+#define SW_PME_OUTPUT_ENABLE		BIT(1)
+#define SW_PME_ACTIVE_HIGH		BIT(0)
+
+#define PORT_MAGIC_PACKET_DETECT	BIT(2)
+#define PORT_LINK_UP_DETECT		BIT(1)
+#define PORT_ENERGY_DETECT		BIT(0)
+
+/* ACL */
+
+#define ACL_FIRST_RULE_M		0xF
+
+#define ACL_MODE_M			0x3
+#define ACL_MODE_S			4
+#define ACL_MODE_DISABLE		0
+#define ACL_MODE_LAYER_2		1
+#define ACL_MODE_LAYER_3		2
+#define ACL_MODE_LAYER_4		3
+#define ACL_ENABLE_M			0x3
+#define ACL_ENABLE_S			2
+#define ACL_ENABLE_2_COUNT		0
+#define ACL_ENABLE_2_TYPE		1
+#define ACL_ENABLE_2_MAC		2
+#define ACL_ENABLE_2_BOTH		3
+#define ACL_ENABLE_3_IP			1
+#define ACL_ENABLE_3_SRC_DST_COMP	2
+#define ACL_ENABLE_4_PROTOCOL		0
+#define ACL_ENABLE_4_TCP_PORT_COMP	1
+#define ACL_ENABLE_4_UDP_PORT_COMP	2
+#define ACL_ENABLE_4_TCP_SEQN_COMP	3
+#define ACL_SRC				BIT(1)
+#define ACL_EQUAL			BIT(0)
+
+#define ACL_MAX_PORT			0xFFFF
+
+#define ACL_MIN_PORT			0xFFFF
+#define ACL_IP_ADDR			0xFFFFFFFF
+#define ACL_TCP_SEQNUM			0xFFFFFFFF
+
+#define ACL_RESERVED			0xF8
+#define ACL_PORT_MODE_M			0x3
+#define ACL_PORT_MODE_S			1
+#define ACL_PORT_MODE_DISABLE		0
+#define ACL_PORT_MODE_EITHER		1
+#define ACL_PORT_MODE_IN_RANGE		2
+#define ACL_PORT_MODE_OUT_OF_RANGE	3
+
+#define ACL_TCP_FLAG_ENABLE		BIT(0)
+
+#define ACL_TCP_FLAG_M			0xFF
+
+#define ACL_TCP_FLAG			0xFF
+#define ACL_ETH_TYPE			0xFFFF
+#define ACL_IP_M			0xFFFFFFFF
+
+#define ACL_PRIO_MODE_M			0x3
+#define ACL_PRIO_MODE_S			6
+#define ACL_PRIO_MODE_DISABLE		0
+#define ACL_PRIO_MODE_HIGHER		1
+#define ACL_PRIO_MODE_LOWER		2
+#define ACL_PRIO_MODE_REPLACE		3
+#define ACL_PRIO_M			0x7
+#define ACL_PRIO_S			3
+#define ACL_VLAN_PRIO_REPLACE		BIT(2)
+#define ACL_VLAN_PRIO_M			0x7
+#define ACL_VLAN_PRIO_HI_M		0x3
+
+#define ACL_VLAN_PRIO_LO_M		0x8
+#define ACL_VLAN_PRIO_S			7
+#define ACL_MAP_MODE_M			0x3
+#define ACL_MAP_MODE_S			5
+#define ACL_MAP_MODE_DISABLE		0
+#define ACL_MAP_MODE_OR			1
+#define ACL_MAP_MODE_AND		2
+#define ACL_MAP_MODE_REPLACE		3
+#define ACL_MAP_PORT_M			0x1F
+
+#define ACL_CNT_M			(BIT(11) - 1)
+#define ACL_CNT_S			5
+#define ACL_MSEC_UNIT			BIT(4)
+#define ACL_INTR_MODE			BIT(3)
+
+#define REG_PORT_ACL_BYTE_EN_MSB	0x10
+
+#define ACL_BYTE_EN_MSB_M		0x3F
+
+#define REG_PORT_ACL_BYTE_EN_LSB	0x11
+
+#define ACL_ACTION_START		0xA
+#define ACL_ACTION_LEN			2
+#define ACL_INTR_CNT_START		0xB
+#define ACL_RULESET_START		0xC
+#define ACL_RULESET_LEN			2
+#define ACL_TABLE_LEN			14
+
+#define ACL_ACTION_ENABLE		0x000C
+#define ACL_MATCH_ENABLE		0x1FF0
+#define ACL_RULESET_ENABLE		0x2003
+#define ACL_BYTE_ENABLE			((ACL_BYTE_EN_MSB_M << 8) | 0xFF)
+#define ACL_MODE_ENABLE			(0x10 << 8)
+
+#define REG_PORT_ACL_CTRL_0		0x12
+
+#define PORT_ACL_WRITE_DONE		BIT(6)
+#define PORT_ACL_READ_DONE		BIT(5)
+#define PORT_ACL_WRITE			BIT(4)
+#define PORT_ACL_INDEX_M		0xF
+
+#define REG_PORT_ACL_CTRL_1		0x13
+
+#define PORT_ACL_FORCE_DLR_MISS		BIT(0)
+
+#define KSZ8795_ID_HI			0x0022
+#define KSZ8795_ID_LO			0x1550
+#define KSZ8863_ID_LO			0x1430
+
+#define KSZ8795_SW_ID			0x8795
+
+#define PHY_REG_LINK_MD			0x1D
+
+#define PHY_START_CABLE_DIAG		BIT(15)
+#define PHY_CABLE_DIAG_RESULT_M		GENMASK(14, 13)
+#define PHY_CABLE_DIAG_RESULT		0x6000
+#define PHY_CABLE_STAT_NORMAL		0x0000
+#define PHY_CABLE_STAT_OPEN		0x2000
+#define PHY_CABLE_STAT_SHORT		0x4000
+#define PHY_CABLE_STAT_FAILED		0x6000
+#define PHY_CABLE_10M_SHORT		BIT(12)
+#define PHY_CABLE_FAULT_COUNTER_M	GENMASK(8, 0)
+
+#define PHY_REG_PHY_CTRL		0x1F
+
+#define PHY_MODE_M			0x7
+#define PHY_MODE_S			8
+#define PHY_STAT_REVERSED_POLARITY	BIT(5)
+#define PHY_STAT_MDIX			BIT(4)
+#define PHY_FORCE_LINK			BIT(3)
+#define PHY_POWER_SAVING_ENABLE		BIT(2)
+#define PHY_REMOTE_LOOPBACK		BIT(1)
+
+/* Chip resource */
+
+#define PRIO_QUEUES			4
+
+#define KS_PRIO_IN_REG			4
+
+#define MIB_COUNTER_NUM		0x20
+
+/* Common names used by other drivers */
+
+#define P_BCAST_STORM_CTRL		REG_PORT_CTRL_0
+#define P_PRIO_CTRL			REG_PORT_CTRL_0
+#define P_TAG_CTRL			REG_PORT_CTRL_0
+#define P_MIRROR_CTRL			REG_PORT_CTRL_1
+#define P_802_1P_CTRL			REG_PORT_CTRL_2
+#define P_PASS_ALL_CTRL			REG_PORT_CTRL_12
+#define P_INS_SRC_PVID_CTRL		REG_PORT_CTRL_12
+#define P_DROP_TAG_CTRL			REG_PORT_CTRL_13
+#define P_RATE_LIMIT_CTRL		REG_PORT_RATE_LIMIT
+
+#define S_UNKNOWN_DA_CTRL		REG_SWITCH_CTRL_12
+#define S_FORWARD_INVALID_VID_CTRL	REG_FORWARD_INVALID_VID
+
+#define S_FLUSH_TABLE_CTRL		REG_SW_CTRL_0
+#define S_LINK_AGING_CTRL		REG_SW_CTRL_0
+#define S_HUGE_PACKET_CTRL		REG_SW_CTRL_1
+#define S_MIRROR_CTRL			REG_SW_CTRL_3
+#define S_REPLACE_VID_CTRL		REG_SW_CTRL_4
+#define S_PASS_PAUSE_CTRL		REG_SW_CTRL_10
+#define S_802_1P_PRIO_CTRL		REG_SW_CTRL_12
+#define S_TOS_PRIO_CTRL			REG_TOS_PRIO_CTRL_0
+#define S_IPV6_MLD_CTRL			REG_SW_CTRL_21
+
+#define IND_ACC_TABLE(table)		((table) << 8)
+
+/* */
+#define REG_IND_EEE_GLOB2_LO		0x34
+#define REG_IND_EEE_GLOB2_HI		0x35
+
+/**
+ * MIB_COUNTER_VALUE			00-00000000-3FFFFFFF
+ * MIB_TOTAL_BYTES			00-0000000F-FFFFFFFF
+ * MIB_PACKET_DROPPED			00-00000000-0000FFFF
+ * MIB_COUNTER_VALID			00-00000020-00000000
+ * MIB_COUNTER_OVERFLOW			00-00000040-00000000
+ */
+
+#define MIB_COUNTER_VALUE		0x3FFFFFFF
+
+#define KSZ8795_MIB_TOTAL_RX_0		0x100
+#define KSZ8795_MIB_TOTAL_TX_0		0x101
+#define KSZ8795_MIB_TOTAL_RX_1		0x104
+#define KSZ8795_MIB_TOTAL_TX_1		0x105
+
+#define KSZ8863_MIB_PACKET_DROPPED_TX_0 0x100
+#define KSZ8863_MIB_PACKET_DROPPED_RX_0 0x105
+
+#define MIB_PACKET_DROPPED		0x0000FFFF
+
+#define MIB_TOTAL_BYTES_H		0x0000000F
+
+#define TAIL_TAG_OVERRIDE		BIT(6)
+#define TAIL_TAG_LOOKUP			BIT(7)
+
+#define FID_ENTRIES			128
+
+#endif