Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1221 insertions, 0 deletions

diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
new file mode 100644
index 000000000..bf13d47c2
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -0,0 +1,1221 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Microchip KSZ9477 switch driver main logic
+ *
+ * Copyright (C) 2017-2019 Microchip Technology Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/iopoll.h>
+#include <linux/platform_data/microchip-ksz.h>
+#include <linux/phy.h>
+#include <linux/if_bridge.h>
+#include <linux/if_vlan.h>
+#include <net/dsa.h>
+#include <net/switchdev.h>
+
+#include "ksz9477_reg.h"
+#include "ksz_common.h"
+#include "ksz9477.h"
+
+static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
+{
+	regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0);
+}
+
+static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits,
+			 bool set)
+{
+	regmap_update_bits(dev->regmap[0], PORT_CTRL_ADDR(port, offset),
+			   bits, set ? bits : 0);
+}
+
+static void ksz9477_cfg32(struct ksz_device *dev, u32 addr, u32 bits, bool set)
+{
+	regmap_update_bits(dev->regmap[2], addr, bits, set ? bits : 0);
+}
+
+static void ksz9477_port_cfg32(struct ksz_device *dev, int port, int offset,
+			       u32 bits, bool set)
+{
+	regmap_update_bits(dev->regmap[2], PORT_CTRL_ADDR(port, offset),
+			   bits, set ? bits : 0);
+}
+
+int ksz9477_change_mtu(struct ksz_device *dev, int port, int mtu)
+{
+	u16 frame_size;
+
+	if (!dsa_is_cpu_port(dev->ds, port))
+		return 0;
+
+	frame_size = mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
+
+	return regmap_update_bits(dev->regmap[1], REG_SW_MTU__2,
+				  REG_SW_MTU_MASK, frame_size);
+}
+
+static int ksz9477_wait_vlan_ctrl_ready(struct ksz_device *dev)
+{
+	unsigned int val;
+
+	return regmap_read_poll_timeout(dev->regmap[0], REG_SW_VLAN_CTRL,
+					val, !(val & VLAN_START), 10, 1000);
+}
+
+static int ksz9477_get_vlan_table(struct ksz_device *dev, u16 vid,
+				  u32 *vlan_table)
+{
+	int ret;
+
+	mutex_lock(&dev->vlan_mutex);
+
+	ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
+	ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_READ | VLAN_START);
+
+	/* wait to be cleared */
+	ret = ksz9477_wait_vlan_ctrl_ready(dev);
+	if (ret) {
+		dev_dbg(dev->dev, "Failed to read vlan table\n");
+		goto exit;
+	}
+
+	ksz_read32(dev, REG_SW_VLAN_ENTRY__4, &vlan_table[0]);
+	ksz_read32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, &vlan_table[1]);
+	ksz_read32(dev, REG_SW_VLAN_ENTRY_PORTS__4, &vlan_table[2]);
+
+	ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
+
+exit:
+	mutex_unlock(&dev->vlan_mutex);
+
+	return ret;
+}
+
+static int ksz9477_set_vlan_table(struct ksz_device *dev, u16 vid,
+				  u32 *vlan_table)
+{
+	int ret;
+
+	mutex_lock(&dev->vlan_mutex);
+
+	ksz_write32(dev, REG_SW_VLAN_ENTRY__4, vlan_table[0]);
+	ksz_write32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, vlan_table[1]);
+	ksz_write32(dev, REG_SW_VLAN_ENTRY_PORTS__4, vlan_table[2]);
+
+	ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
+	ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_START | VLAN_WRITE);
+
+	/* wait to be cleared */
+	ret = ksz9477_wait_vlan_ctrl_ready(dev);
+	if (ret) {
+		dev_dbg(dev->dev, "Failed to write vlan table\n");
+		goto exit;
+	}
+
+	ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
+
+	/* update vlan cache table */
+	dev->vlan_cache[vid].table[0] = vlan_table[0];
+	dev->vlan_cache[vid].table[1] = vlan_table[1];
+	dev->vlan_cache[vid].table[2] = vlan_table[2];
+
+exit:
+	mutex_unlock(&dev->vlan_mutex);
+
+	return ret;
+}
+
+static void ksz9477_read_table(struct ksz_device *dev, u32 *table)
+{
+	ksz_read32(dev, REG_SW_ALU_VAL_A, &table[0]);
+	ksz_read32(dev, REG_SW_ALU_VAL_B, &table[1]);
+	ksz_read32(dev, REG_SW_ALU_VAL_C, &table[2]);
+	ksz_read32(dev, REG_SW_ALU_VAL_D, &table[3]);
+}
+
+static void ksz9477_write_table(struct ksz_device *dev, u32 *table)
+{
+	ksz_write32(dev, REG_SW_ALU_VAL_A, table[0]);
+	ksz_write32(dev, REG_SW_ALU_VAL_B, table[1]);
+	ksz_write32(dev, REG_SW_ALU_VAL_C, table[2]);
+	ksz_write32(dev, REG_SW_ALU_VAL_D, table[3]);
+}
+
+static int ksz9477_wait_alu_ready(struct ksz_device *dev)
+{
+	unsigned int val;
+
+	return regmap_read_poll_timeout(dev->regmap[2], REG_SW_ALU_CTRL__4,
+					val, !(val & ALU_START), 10, 1000);
+}
+
+static int ksz9477_wait_alu_sta_ready(struct ksz_device *dev)
+{
+	unsigned int val;
+
+	return regmap_read_poll_timeout(dev->regmap[2],
+					REG_SW_ALU_STAT_CTRL__4,
+					val, !(val & ALU_STAT_START),
+					10, 1000);
+}
+
+int ksz9477_reset_switch(struct ksz_device *dev)
+{
+	u8 data8;
+	u32 data32;
+
+	/* reset switch */
+	ksz_cfg(dev, REG_SW_OPERATION, SW_RESET, true);
+
+	/* turn off SPI DO Edge select */
+	regmap_update_bits(dev->regmap[0], REG_SW_GLOBAL_SERIAL_CTRL_0,
+			   SPI_AUTO_EDGE_DETECTION, 0);
+
+	/* default configuration */
+	ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8);
+	data8 = SW_AGING_ENABLE | SW_LINK_AUTO_AGING |
+	      SW_SRC_ADDR_FILTER | SW_FLUSH_STP_TABLE | SW_FLUSH_MSTP_TABLE;
+	ksz_write8(dev, REG_SW_LUE_CTRL_1, data8);
+
+	/* disable interrupts */
+	ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK);
+	ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0x7F);
+	ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32);
+
+	/* KSZ9893 compatible chips do not support refclk configuration */
+	if (dev->chip_id == KSZ9893_CHIP_ID ||
+	    dev->chip_id == KSZ8563_CHIP_ID ||
+	    dev->chip_id == KSZ9563_CHIP_ID)
+		return 0;
+
+	data8 = SW_ENABLE_REFCLKO;
+	if (dev->synclko_disable)
+		data8 = 0;
+	else if (dev->synclko_125)
+		data8 = SW_ENABLE_REFCLKO | SW_REFCLKO_IS_125MHZ;
+	ksz_write8(dev, REG_SW_GLOBAL_OUTPUT_CTRL__1, data8);
+
+	return 0;
+}
+
+void ksz9477_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, u64 *cnt)
+{
+	struct ksz_port *p = &dev->ports[port];
+	unsigned int val;
+	u32 data;
+	int ret;
+
+	/* retain the flush/freeze bit */
+	data = p->freeze ? MIB_COUNTER_FLUSH_FREEZE : 0;
+	data |= MIB_COUNTER_READ;
+	data |= (addr << MIB_COUNTER_INDEX_S);
+	ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data);
+
+	ret = regmap_read_poll_timeout(dev->regmap[2],
+			PORT_CTRL_ADDR(port, REG_PORT_MIB_CTRL_STAT__4),
+			val, !(val & MIB_COUNTER_READ), 10, 1000);
+	/* failed to read MIB. get out of loop */
+	if (ret) {
+		dev_dbg(dev->dev, "Failed to get MIB\n");
+		return;
+	}
+
+	/* count resets upon read */
+	ksz_pread32(dev, port, REG_PORT_MIB_DATA, &data);
+	*cnt += data;
+}
+
+void ksz9477_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
+		       u64 *dropped, u64 *cnt)
+{
+	addr = dev->info->mib_names[addr].index;
+	ksz9477_r_mib_cnt(dev, port, addr, cnt);
+}
+
+void ksz9477_freeze_mib(struct ksz_device *dev, int port, bool freeze)
+{
+	u32 val = freeze ? MIB_COUNTER_FLUSH_FREEZE : 0;
+	struct ksz_port *p = &dev->ports[port];
+
+	/* enable/disable the port for flush/freeze function */
+	mutex_lock(&p->mib.cnt_mutex);
+	ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, val);
+
+	/* used by MIB counter reading code to know freeze is enabled */
+	p->freeze = freeze;
+	mutex_unlock(&p->mib.cnt_mutex);
+}
+
+void ksz9477_port_init_cnt(struct ksz_device *dev, int port)
+{
+	struct ksz_port_mib *mib = &dev->ports[port].mib;
+
+	/* flush all enabled port MIB counters */
+	mutex_lock(&mib->cnt_mutex);
+	ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4,
+		     MIB_COUNTER_FLUSH_FREEZE);
+	ksz_write8(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FLUSH);
+	ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, 0);
+	mutex_unlock(&mib->cnt_mutex);
+}
+
+static void ksz9477_r_phy_quirks(struct ksz_device *dev, u16 addr, u16 reg,
+				 u16 *data)
+{
+	/* KSZ8563R do not have extended registers but BMSR_ESTATEN and
+	 * BMSR_ERCAP bits are set.
+	 */
+	if (dev->chip_id == KSZ8563_CHIP_ID && reg == MII_BMSR)
+		*data &= ~(BMSR_ESTATEN | BMSR_ERCAP);
+}
+
+int ksz9477_r_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 *data)
+{
+	u16 val = 0xffff;
+	int ret;
+
+	/* No real PHY after this. Simulate the PHY.
+	 * A fixed PHY can be setup in the device tree, but this function is
+	 * still called for that port during initialization.
+	 * For RGMII PHY there is no way to access it so the fixed PHY should
+	 * be used.  For SGMII PHY the supporting code will be added later.
+	 */
+	if (!dev->info->internal_phy[addr]) {
+		struct ksz_port *p = &dev->ports[addr];
+
+		switch (reg) {
+		case MII_BMCR:
+			val = 0x1140;
+			break;
+		case MII_BMSR:
+			val = 0x796d;
+			break;
+		case MII_PHYSID1:
+			val = 0x0022;
+			break;
+		case MII_PHYSID2:
+			val = 0x1631;
+			break;
+		case MII_ADVERTISE:
+			val = 0x05e1;
+			break;
+		case MII_LPA:
+			val = 0xc5e1;
+			break;
+		case MII_CTRL1000:
+			val = 0x0700;
+			break;
+		case MII_STAT1000:
+			if (p->phydev.speed == SPEED_1000)
+				val = 0x3800;
+			else
+				val = 0;
+			break;
+		}
+	} else {
+		ret = ksz_pread16(dev, addr, 0x100 + (reg << 1), &val);
+		if (ret)
+			return ret;
+
+		ksz9477_r_phy_quirks(dev, addr, reg, &val);
+	}
+
+	*data = val;
+
+	return 0;
+}
+
+int ksz9477_w_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 val)
+{
+	/* No real PHY after this. */
+	if (!dev->info->internal_phy[addr])
+		return 0;
+
+	return ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val);
+}
+
+void ksz9477_cfg_port_member(struct ksz_device *dev, int port, u8 member)
+{
+	ksz_pwrite32(dev, port, REG_PORT_VLAN_MEMBERSHIP__4, member);
+}
+
+void ksz9477_flush_dyn_mac_table(struct ksz_device *dev, int port)
+{
+	const u16 *regs = dev->info->regs;
+	u8 data;
+
+	regmap_update_bits(dev->regmap[0], REG_SW_LUE_CTRL_2,
+			   SW_FLUSH_OPTION_M << SW_FLUSH_OPTION_S,
+			   SW_FLUSH_OPTION_DYN_MAC << SW_FLUSH_OPTION_S);
+
+	if (port < dev->info->port_cnt) {
+		/* flush individual port */
+		ksz_pread8(dev, port, regs[P_STP_CTRL], &data);
+		if (!(data & PORT_LEARN_DISABLE))
+			ksz_pwrite8(dev, port, regs[P_STP_CTRL],
+				    data | PORT_LEARN_DISABLE);
+		ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_DYN_MAC_TABLE, true);
+		ksz_pwrite8(dev, port, regs[P_STP_CTRL], data);
+	} else {
+		/* flush all */
+		ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_STP_TABLE, true);
+	}
+}
+
+int ksz9477_port_vlan_filtering(struct ksz_device *dev, int port,
+				bool flag, struct netlink_ext_ack *extack)
+{
+	if (flag) {
+		ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
+			     PORT_VLAN_LOOKUP_VID_0, true);
+		ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, true);
+	} else {
+		ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, false);
+		ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
+			     PORT_VLAN_LOOKUP_VID_0, false);
+	}
+
+	return 0;
+}
+
+int ksz9477_port_vlan_add(struct ksz_device *dev, int port,
+			  const struct switchdev_obj_port_vlan *vlan,
+			  struct netlink_ext_ack *extack)
+{
+	u32 vlan_table[3];
+	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+	int err;
+
+	err = ksz9477_get_vlan_table(dev, vlan->vid, vlan_table);
+	if (err) {
+		NL_SET_ERR_MSG_MOD(extack, "Failed to get vlan table");
+		return err;
+	}
+
+	vlan_table[0] = VLAN_VALID | (vlan->vid & VLAN_FID_M);
+	if (untagged)
+		vlan_table[1] |= BIT(port);
+	else
+		vlan_table[1] &= ~BIT(port);
+	vlan_table[1] &= ~(BIT(dev->cpu_port));
+
+	vlan_table[2] |= BIT(port) | BIT(dev->cpu_port);
+
+	err = ksz9477_set_vlan_table(dev, vlan->vid, vlan_table);
+	if (err) {
+		NL_SET_ERR_MSG_MOD(extack, "Failed to set vlan table");
+		return err;
+	}
+
+	/* change PVID */
+	if (vlan->flags & BRIDGE_VLAN_INFO_PVID)
+		ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, vlan->vid);
+
+	return 0;
+}
+
+int ksz9477_port_vlan_del(struct ksz_device *dev, int port,
+			  const struct switchdev_obj_port_vlan *vlan)
+{
+	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+	u32 vlan_table[3];
+	u16 pvid;
+
+	ksz_pread16(dev, port, REG_PORT_DEFAULT_VID, &pvid);
+	pvid = pvid & 0xFFF;
+
+	if (ksz9477_get_vlan_table(dev, vlan->vid, vlan_table)) {
+		dev_dbg(dev->dev, "Failed to get vlan table\n");
+		return -ETIMEDOUT;
+	}
+
+	vlan_table[2] &= ~BIT(port);
+
+	if (pvid == vlan->vid)
+		pvid = 1;
+
+	if (untagged)
+		vlan_table[1] &= ~BIT(port);
+
+	if (ksz9477_set_vlan_table(dev, vlan->vid, vlan_table)) {
+		dev_dbg(dev->dev, "Failed to set vlan table\n");
+		return -ETIMEDOUT;
+	}
+
+	ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, pvid);
+
+	return 0;
+}
+
+int ksz9477_fdb_add(struct ksz_device *dev, int port,
+		    const unsigned char *addr, u16 vid, struct dsa_db db)
+{
+	u32 alu_table[4];
+	u32 data;
+	int ret = 0;
+
+	mutex_lock(&dev->alu_mutex);
+
+	/* find any entry with mac & vid */
+	data = vid << ALU_FID_INDEX_S;
+	data |= ((addr[0] << 8) | addr[1]);
+	ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
+
+	data = ((addr[2] << 24) | (addr[3] << 16));
+	data |= ((addr[4] << 8) | addr[5]);
+	ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
+
+	/* start read operation */
+	ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
+
+	/* wait to be finished */
+	ret = ksz9477_wait_alu_ready(dev);
+	if (ret) {
+		dev_dbg(dev->dev, "Failed to read ALU\n");
+		goto exit;
+	}
+
+	/* read ALU entry */
+	ksz9477_read_table(dev, alu_table);
+
+	/* update ALU entry */
+	alu_table[0] = ALU_V_STATIC_VALID;
+	alu_table[1] |= BIT(port);
+	if (vid)
+		alu_table[1] |= ALU_V_USE_FID;
+	alu_table[2] = (vid << ALU_V_FID_S);
+	alu_table[2] |= ((addr[0] << 8) | addr[1]);
+	alu_table[3] = ((addr[2] << 24) | (addr[3] << 16));
+	alu_table[3] |= ((addr[4] << 8) | addr[5]);
+
+	ksz9477_write_table(dev, alu_table);
+
+	ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
+
+	/* wait to be finished */
+	ret = ksz9477_wait_alu_ready(dev);
+	if (ret)
+		dev_dbg(dev->dev, "Failed to write ALU\n");
+
+exit:
+	mutex_unlock(&dev->alu_mutex);
+
+	return ret;
+}
+
+int ksz9477_fdb_del(struct ksz_device *dev, int port,
+		    const unsigned char *addr, u16 vid, struct dsa_db db)
+{
+	u32 alu_table[4];
+	u32 data;
+	int ret = 0;
+
+	mutex_lock(&dev->alu_mutex);
+
+	/* read any entry with mac & vid */
+	data = vid << ALU_FID_INDEX_S;
+	data |= ((addr[0] << 8) | addr[1]);
+	ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
+
+	data = ((addr[2] << 24) | (addr[3] << 16));
+	data |= ((addr[4] << 8) | addr[5]);
+	ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
+
+	/* start read operation */
+	ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
+
+	/* wait to be finished */
+	ret = ksz9477_wait_alu_ready(dev);
+	if (ret) {
+		dev_dbg(dev->dev, "Failed to read ALU\n");
+		goto exit;
+	}
+
+	ksz_read32(dev, REG_SW_ALU_VAL_A, &alu_table[0]);
+	if (alu_table[0] & ALU_V_STATIC_VALID) {
+		ksz_read32(dev, REG_SW_ALU_VAL_B, &alu_table[1]);
+		ksz_read32(dev, REG_SW_ALU_VAL_C, &alu_table[2]);
+		ksz_read32(dev, REG_SW_ALU_VAL_D, &alu_table[3]);
+
+		/* clear forwarding port */
+		alu_table[1] &= ~BIT(port);
+
+		/* if there is no port to forward, clear table */
+		if ((alu_table[1] & ALU_V_PORT_MAP) == 0) {
+			alu_table[0] = 0;
+			alu_table[1] = 0;
+			alu_table[2] = 0;
+			alu_table[3] = 0;
+		}
+	} else {
+		alu_table[0] = 0;
+		alu_table[1] = 0;
+		alu_table[2] = 0;
+		alu_table[3] = 0;
+	}
+
+	ksz9477_write_table(dev, alu_table);
+
+	ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
+
+	/* wait to be finished */
+	ret = ksz9477_wait_alu_ready(dev);
+	if (ret)
+		dev_dbg(dev->dev, "Failed to write ALU\n");
+
+exit:
+	mutex_unlock(&dev->alu_mutex);
+
+	return ret;
+}
+
+static void ksz9477_convert_alu(struct alu_struct *alu, u32 *alu_table)
+{
+	alu->is_static = !!(alu_table[0] & ALU_V_STATIC_VALID);
+	alu->is_src_filter = !!(alu_table[0] & ALU_V_SRC_FILTER);
+	alu->is_dst_filter = !!(alu_table[0] & ALU_V_DST_FILTER);
+	alu->prio_age = (alu_table[0] >> ALU_V_PRIO_AGE_CNT_S) &
+			ALU_V_PRIO_AGE_CNT_M;
+	alu->mstp = alu_table[0] & ALU_V_MSTP_M;
+
+	alu->is_override = !!(alu_table[1] & ALU_V_OVERRIDE);
+	alu->is_use_fid = !!(alu_table[1] & ALU_V_USE_FID);
+	alu->port_forward = alu_table[1] & ALU_V_PORT_MAP;
+
+	alu->fid = (alu_table[2] >> ALU_V_FID_S) & ALU_V_FID_M;
+
+	alu->mac[0] = (alu_table[2] >> 8) & 0xFF;
+	alu->mac[1] = alu_table[2] & 0xFF;
+	alu->mac[2] = (alu_table[3] >> 24) & 0xFF;
+	alu->mac[3] = (alu_table[3] >> 16) & 0xFF;
+	alu->mac[4] = (alu_table[3] >> 8) & 0xFF;
+	alu->mac[5] = alu_table[3] & 0xFF;
+}
+
+int ksz9477_fdb_dump(struct ksz_device *dev, int port,
+		     dsa_fdb_dump_cb_t *cb, void *data)
+{
+	int ret = 0;
+	u32 ksz_data;
+	u32 alu_table[4];
+	struct alu_struct alu;
+	int timeout;
+
+	mutex_lock(&dev->alu_mutex);
+
+	/* start ALU search */
+	ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_START | ALU_SEARCH);
+
+	do {
+		timeout = 1000;
+		do {
+			ksz_read32(dev, REG_SW_ALU_CTRL__4, &ksz_data);
+			if ((ksz_data & ALU_VALID) || !(ksz_data & ALU_START))
+				break;
+			usleep_range(1, 10);
+		} while (timeout-- > 0);
+
+		if (!timeout) {
+			dev_dbg(dev->dev, "Failed to search ALU\n");
+			ret = -ETIMEDOUT;
+			goto exit;
+		}
+
+		if (!(ksz_data & ALU_VALID))
+			continue;
+
+		/* read ALU table */
+		ksz9477_read_table(dev, alu_table);
+
+		ksz9477_convert_alu(&alu, alu_table);
+
+		if (alu.port_forward & BIT(port)) {
+			ret = cb(alu.mac, alu.fid, alu.is_static, data);
+			if (ret)
+				goto exit;
+		}
+	} while (ksz_data & ALU_START);
+
+exit:
+
+	/* stop ALU search */
+	ksz_write32(dev, REG_SW_ALU_CTRL__4, 0);
+
+	mutex_unlock(&dev->alu_mutex);
+
+	return ret;
+}
+
+int ksz9477_mdb_add(struct ksz_device *dev, int port,
+		    const struct switchdev_obj_port_mdb *mdb, struct dsa_db db)
+{
+	u32 static_table[4];
+	const u8 *shifts;
+	const u32 *masks;
+	u32 data;
+	int index;
+	u32 mac_hi, mac_lo;
+	int err = 0;
+
+	shifts = dev->info->shifts;
+	masks = dev->info->masks;
+
+	mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
+	mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
+	mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
+
+	mutex_lock(&dev->alu_mutex);
+
+	for (index = 0; index < dev->info->num_statics; index++) {
+		/* find empty slot first */
+		data = (index << shifts[ALU_STAT_INDEX]) |
+			masks[ALU_STAT_READ] | ALU_STAT_START;
+		ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+		/* wait to be finished */
+		err = ksz9477_wait_alu_sta_ready(dev);
+		if (err) {
+			dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+			goto exit;
+		}
+
+		/* read ALU static table */
+		ksz9477_read_table(dev, static_table);
+
+		if (static_table[0] & ALU_V_STATIC_VALID) {
+			/* check this has same vid & mac address */
+			if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) &&
+			    ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
+			    static_table[3] == mac_lo) {
+				/* found matching one */
+				break;
+			}
+		} else {
+			/* found empty one */
+			break;
+		}
+	}
+
+	/* no available entry */
+	if (index == dev->info->num_statics) {
+		err = -ENOSPC;
+		goto exit;
+	}
+
+	/* add entry */
+	static_table[0] = ALU_V_STATIC_VALID;
+	static_table[1] |= BIT(port);
+	if (mdb->vid)
+		static_table[1] |= ALU_V_USE_FID;
+	static_table[2] = (mdb->vid << ALU_V_FID_S);
+	static_table[2] |= mac_hi;
+	static_table[3] = mac_lo;
+
+	ksz9477_write_table(dev, static_table);
+
+	data = (index << shifts[ALU_STAT_INDEX]) | ALU_STAT_START;
+	ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+	/* wait to be finished */
+	if (ksz9477_wait_alu_sta_ready(dev))
+		dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+
+exit:
+	mutex_unlock(&dev->alu_mutex);
+	return err;
+}
+
+int ksz9477_mdb_del(struct ksz_device *dev, int port,
+		    const struct switchdev_obj_port_mdb *mdb, struct dsa_db db)
+{
+	u32 static_table[4];
+	const u8 *shifts;
+	const u32 *masks;
+	u32 data;
+	int index;
+	int ret = 0;
+	u32 mac_hi, mac_lo;
+
+	shifts = dev->info->shifts;
+	masks = dev->info->masks;
+
+	mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
+	mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
+	mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
+
+	mutex_lock(&dev->alu_mutex);
+
+	for (index = 0; index < dev->info->num_statics; index++) {
+		/* find empty slot first */
+		data = (index << shifts[ALU_STAT_INDEX]) |
+			masks[ALU_STAT_READ] | ALU_STAT_START;
+		ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+		/* wait to be finished */
+		ret = ksz9477_wait_alu_sta_ready(dev);
+		if (ret) {
+			dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+			goto exit;
+		}
+
+		/* read ALU static table */
+		ksz9477_read_table(dev, static_table);
+
+		if (static_table[0] & ALU_V_STATIC_VALID) {
+			/* check this has same vid & mac address */
+
+			if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) &&
+			    ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
+			    static_table[3] == mac_lo) {
+				/* found matching one */
+				break;
+			}
+		}
+	}
+
+	/* no available entry */
+	if (index == dev->info->num_statics)
+		goto exit;
+
+	/* clear port */
+	static_table[1] &= ~BIT(port);
+
+	if ((static_table[1] & ALU_V_PORT_MAP) == 0) {
+		/* delete entry */
+		static_table[0] = 0;
+		static_table[1] = 0;
+		static_table[2] = 0;
+		static_table[3] = 0;
+	}
+
+	ksz9477_write_table(dev, static_table);
+
+	data = (index << shifts[ALU_STAT_INDEX]) | ALU_STAT_START;
+	ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+	/* wait to be finished */
+	ret = ksz9477_wait_alu_sta_ready(dev);
+	if (ret)
+		dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+
+exit:
+	mutex_unlock(&dev->alu_mutex);
+
+	return ret;
+}
+
+int ksz9477_port_mirror_add(struct ksz_device *dev, int port,
+			    struct dsa_mall_mirror_tc_entry *mirror,
+			    bool ingress, struct netlink_ext_ack *extack)
+{
+	u8 data;
+	int p;
+
+	/* Limit to one sniffer port
+	 * Check if any of the port is already set for sniffing
+	 * If yes, instruct the user to remove the previous entry & exit
+	 */
+	for (p = 0; p < dev->info->port_cnt; p++) {
+		/* Skip the current sniffing port */
+		if (p == mirror->to_local_port)
+			continue;
+
+		ksz_pread8(dev, p, P_MIRROR_CTRL, &data);
+
+		if (data & PORT_MIRROR_SNIFFER) {
+			NL_SET_ERR_MSG_MOD(extack,
+					   "Sniffer port is already configured, delete existing rules & retry");
+			return -EBUSY;
+		}
+	}
+
+	if (ingress)
+		ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true);
+	else
+		ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true);
+
+	/* configure mirror port */
+	ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
+		     PORT_MIRROR_SNIFFER, true);
+
+	ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false);
+
+	return 0;
+}
+
+void ksz9477_port_mirror_del(struct ksz_device *dev, int port,
+			     struct dsa_mall_mirror_tc_entry *mirror)
+{
+	bool in_use = false;
+	u8 data;
+	int p;
+
+	if (mirror->ingress)
+		ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false);
+	else
+		ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false);
+
+
+	/* Check if any of the port is still referring to sniffer port */
+	for (p = 0; p < dev->info->port_cnt; p++) {
+		ksz_pread8(dev, p, P_MIRROR_CTRL, &data);
+
+		if ((data & (PORT_MIRROR_RX | PORT_MIRROR_TX))) {
+			in_use = true;
+			break;
+		}
+	}
+
+	/* delete sniffing if there are no other mirroring rules */
+	if (!in_use)
+		ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
+			     PORT_MIRROR_SNIFFER, false);
+}
+
+static phy_interface_t ksz9477_get_interface(struct ksz_device *dev, int port)
+{
+	phy_interface_t interface;
+	bool gbit;
+
+	if (dev->info->internal_phy[port])
+		return PHY_INTERFACE_MODE_NA;
+
+	gbit = ksz_get_gbit(dev, port);
+
+	interface = ksz_get_xmii(dev, port, gbit);
+
+	return interface;
+}
+
+static void ksz9477_port_mmd_write(struct ksz_device *dev, int port,
+				   u8 dev_addr, u16 reg_addr, u16 val)
+{
+	ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_SETUP,
+		     MMD_SETUP(PORT_MMD_OP_INDEX, dev_addr));
+	ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_INDEX_DATA, reg_addr);
+	ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_SETUP,
+		     MMD_SETUP(PORT_MMD_OP_DATA_NO_INCR, dev_addr));
+	ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_INDEX_DATA, val);
+}
+
+static void ksz9477_phy_errata_setup(struct ksz_device *dev, int port)
+{
+	/* Apply PHY settings to address errata listed in
+	 * KSZ9477, KSZ9897, KSZ9896, KSZ9567, KSZ8565
+	 * Silicon Errata and Data Sheet Clarification documents:
+	 *
+	 * Register settings are needed to improve PHY receive performance
+	 */
+	ksz9477_port_mmd_write(dev, port, 0x01, 0x6f, 0xdd0b);
+	ksz9477_port_mmd_write(dev, port, 0x01, 0x8f, 0x6032);
+	ksz9477_port_mmd_write(dev, port, 0x01, 0x9d, 0x248c);
+	ksz9477_port_mmd_write(dev, port, 0x01, 0x75, 0x0060);
+	ksz9477_port_mmd_write(dev, port, 0x01, 0xd3, 0x7777);
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x06, 0x3008);
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x08, 0x2001);
+
+	/* Transmit waveform amplitude can be improved
+	 * (1000BASE-T, 100BASE-TX, 10BASE-Te)
+	 */
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x04, 0x00d0);
+
+	/* Energy Efficient Ethernet (EEE) feature select must
+	 * be manually disabled (except on KSZ8565 which is 100Mbit)
+	 */
+	if (dev->info->gbit_capable[port])
+		ksz9477_port_mmd_write(dev, port, 0x07, 0x3c, 0x0000);
+
+	/* Register settings are required to meet data sheet
+	 * supply current specifications
+	 */
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x13, 0x6eff);
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x14, 0xe6ff);
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x15, 0x6eff);
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x16, 0xe6ff);
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x17, 0x00ff);
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x18, 0x43ff);
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x19, 0xc3ff);
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x1a, 0x6fff);
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x1b, 0x07ff);
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x1c, 0x0fff);
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x1d, 0xe7ff);
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x1e, 0xefff);
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x20, 0xeeee);
+}
+
+void ksz9477_get_caps(struct ksz_device *dev, int port,
+		      struct phylink_config *config)
+{
+	config->mac_capabilities = MAC_10 | MAC_100 | MAC_ASYM_PAUSE |
+				   MAC_SYM_PAUSE;
+
+	if (dev->info->gbit_capable[port])
+		config->mac_capabilities |= MAC_1000FD;
+}
+
+int ksz9477_set_ageing_time(struct ksz_device *dev, unsigned int msecs)
+{
+	u32 secs = msecs / 1000;
+	u8 value;
+	u8 data;
+	int ret;
+
+	value = FIELD_GET(SW_AGE_PERIOD_7_0_M, secs);
+
+	ret = ksz_write8(dev, REG_SW_LUE_CTRL_3, value);
+	if (ret < 0)
+		return ret;
+
+	data = FIELD_GET(SW_AGE_PERIOD_10_8_M, secs);
+
+	ret = ksz_read8(dev, REG_SW_LUE_CTRL_0, &value);
+	if (ret < 0)
+		return ret;
+
+	value &= ~SW_AGE_CNT_M;
+	value |= FIELD_PREP(SW_AGE_CNT_M, data);
+
+	return ksz_write8(dev, REG_SW_LUE_CTRL_0, value);
+}
+
+void ksz9477_port_queue_split(struct ksz_device *dev, int port)
+{
+	u8 data;
+
+	if (dev->info->num_tx_queues == 8)
+		data = PORT_EIGHT_QUEUE;
+	else if (dev->info->num_tx_queues == 4)
+		data = PORT_FOUR_QUEUE;
+	else if (dev->info->num_tx_queues == 2)
+		data = PORT_TWO_QUEUE;
+	else
+		data = PORT_SINGLE_QUEUE;
+
+	ksz_prmw8(dev, port, REG_PORT_CTRL_0, PORT_QUEUE_SPLIT_MASK, data);
+}
+
+void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
+{
+	struct dsa_switch *ds = dev->ds;
+	u16 data16;
+	u8 member;
+
+	/* enable tag tail for host port */
+	if (cpu_port)
+		ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_TAIL_TAG_ENABLE,
+			     true);
+
+	ksz9477_port_queue_split(dev, port);
+
+	ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, false);
+
+	/* set back pressure */
+	ksz_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE, true);
+
+	/* enable broadcast storm limit */
+	ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
+
+	/* disable DiffServ priority */
+	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_PRIO_ENABLE, false);
+
+	/* replace priority */
+	ksz_port_cfg(dev, port, REG_PORT_MRI_MAC_CTRL, PORT_USER_PRIO_CEILING,
+		     false);
+	ksz9477_port_cfg32(dev, port, REG_PORT_MTI_QUEUE_CTRL_0__4,
+			   MTI_PVID_REPLACE, false);
+
+	/* enable 802.1p priority */
+	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true);
+
+	if (dev->info->internal_phy[port]) {
+		/* do not force flow control */
+		ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
+			     PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL,
+			     false);
+
+		if (dev->info->phy_errata_9477)
+			ksz9477_phy_errata_setup(dev, port);
+	} else {
+		/* force flow control */
+		ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
+			     PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL,
+			     true);
+	}
+
+	if (cpu_port)
+		member = dsa_user_ports(ds);
+	else
+		member = BIT(dsa_upstream_port(ds, port));
+
+	ksz9477_cfg_port_member(dev, port, member);
+
+	/* clear pending interrupts */
+	if (dev->info->internal_phy[port])
+		ksz_pread16(dev, port, REG_PORT_PHY_INT_ENABLE, &data16);
+}
+
+void ksz9477_config_cpu_port(struct dsa_switch *ds)
+{
+	struct ksz_device *dev = ds->priv;
+	struct ksz_port *p;
+	int i;
+
+	for (i = 0; i < dev->info->port_cnt; i++) {
+		if (dsa_is_cpu_port(ds, i) &&
+		    (dev->info->cpu_ports & (1 << i))) {
+			phy_interface_t interface;
+			const char *prev_msg;
+			const char *prev_mode;
+
+			dev->cpu_port = i;
+			p = &dev->ports[i];
+
+			/* Read from XMII register to determine host port
+			 * interface.  If set specifically in device tree
+			 * note the difference to help debugging.
+			 */
+			interface = ksz9477_get_interface(dev, i);
+			if (!p->interface) {
+				if (dev->compat_interface) {
+					dev_warn(dev->dev,
+						 "Using legacy switch \"phy-mode\" property, because it is missing on port %d node. "
+						 "Please update your device tree.\n",
+						 i);
+					p->interface = dev->compat_interface;
+				} else {
+					p->interface = interface;
+				}
+			}
+			if (interface && interface != p->interface) {
+				prev_msg = " instead of ";
+				prev_mode = phy_modes(interface);
+			} else {
+				prev_msg = "";
+				prev_mode = "";
+			}
+			dev_info(dev->dev,
+				 "Port%d: using phy mode %s%s%s\n",
+				 i,
+				 phy_modes(p->interface),
+				 prev_msg,
+				 prev_mode);
+
+			/* enable cpu port */
+			ksz9477_port_setup(dev, i, true);
+		}
+	}
+
+	for (i = 0; i < dev->info->port_cnt; i++) {
+		if (i == dev->cpu_port)
+			continue;
+		ksz_port_stp_state_set(ds, i, BR_STATE_DISABLED);
+	}
+}
+
+int ksz9477_enable_stp_addr(struct ksz_device *dev)
+{
+	const u32 *masks;
+	u32 data;
+	int ret;
+
+	masks = dev->info->masks;
+
+	/* Enable Reserved multicast table */
+	ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_RESV_MCAST_ENABLE, true);
+
+	/* Set the Override bit for forwarding BPDU packet to CPU */
+	ret = ksz_write32(dev, REG_SW_ALU_VAL_B,
+			  ALU_V_OVERRIDE | BIT(dev->cpu_port));
+	if (ret < 0)
+		return ret;
+
+	data = ALU_STAT_START | ALU_RESV_MCAST_ADDR | masks[ALU_STAT_WRITE];
+
+	ret = ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+	if (ret < 0)
+		return ret;
+
+	/* wait to be finished */
+	ret = ksz9477_wait_alu_sta_ready(dev);
+	if (ret < 0) {
+		dev_err(dev->dev, "Failed to update Reserved Multicast table\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+int ksz9477_setup(struct dsa_switch *ds)
+{
+	struct ksz_device *dev = ds->priv;
+	int ret = 0;
+
+	ds->mtu_enforcement_ingress = true;
+
+	/* Required for port partitioning. */
+	ksz9477_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY,
+		      true);
+
+	/* Do not work correctly with tail tagging. */
+	ksz_cfg(dev, REG_SW_MAC_CTRL_0, SW_CHECK_LENGTH, false);
+
+	/* Enable REG_SW_MTU__2 reg by setting SW_JUMBO_PACKET */
+	ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_JUMBO_PACKET, true);
+
+	/* Now we can configure default MTU value */
+	ret = regmap_update_bits(dev->regmap[1], REG_SW_MTU__2, REG_SW_MTU_MASK,
+				 VLAN_ETH_FRAME_LEN + ETH_FCS_LEN);
+	if (ret)
+		return ret;
+
+	/* queue based egress rate limit */
+	ksz_cfg(dev, REG_SW_MAC_CTRL_5, SW_OUT_RATE_LIMIT_QUEUE_BASED, true);
+
+	/* enable global MIB counter freeze function */
+	ksz_cfg(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FREEZE, true);
+
+	return 0;
+}
+
+u32 ksz9477_get_port_addr(int port, int offset)
+{
+	return PORT_CTRL_ADDR(port, offset);
+}
+
+int ksz9477_tc_cbs_set_cinc(struct ksz_device *dev, int port, u32 val)
+{
+	val = val >> 8;
+
+	return ksz_pwrite16(dev, port, REG_PORT_MTI_CREDIT_INCREMENT, val);
+}
+
+int ksz9477_switch_init(struct ksz_device *dev)
+{
+	u8 data8;
+	int ret;
+
+	dev->port_mask = (1 << dev->info->port_cnt) - 1;
+
+	/* turn off SPI DO Edge select */
+	ret = ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
+	if (ret)
+		return ret;
+
+	data8 &= ~SPI_AUTO_EDGE_DETECTION;
+	ret = ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+void ksz9477_switch_exit(struct ksz_device *dev)
+{
+	ksz9477_reset_switch(dev);
+}
+
+MODULE_AUTHOR("Woojung Huh <Woojung.Huh@microchip.com>");
+MODULE_DESCRIPTION("Microchip KSZ9477 Series Switch DSA Driver");
+MODULE_LICENSE("GPL");