Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 448 insertions, 0 deletions

diff --git a/drivers/net/dsa/realtek/rtl8366-core.c b/drivers/net/dsa/realtek/rtl8366-core.c
new file mode 100644
index 000000000..dc5f75be3
--- /dev/null
+++ b/drivers/net/dsa/realtek/rtl8366-core.c
@@ -0,0 +1,448 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Realtek SMI library helpers for the RTL8366x variants
+ * RTL8366RB and RTL8366S
+ *
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com>
+ * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv>
+ * Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com>
+ */
+#include <linux/if_bridge.h>
+#include <net/dsa.h>
+
+#include "realtek.h"
+
+int rtl8366_mc_is_used(struct realtek_priv *priv, int mc_index, int *used)
+{
+	int ret;
+	int i;
+
+	*used = 0;
+	for (i = 0; i < priv->num_ports; i++) {
+		int index = 0;
+
+		ret = priv->ops->get_mc_index(priv, i, &index);
+		if (ret)
+			return ret;
+
+		if (mc_index == index) {
+			*used = 1;
+			break;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtl8366_mc_is_used);
+
+/**
+ * rtl8366_obtain_mc() - retrieve or allocate a VLAN member configuration
+ * @priv: the Realtek SMI device instance
+ * @vid: the VLAN ID to look up or allocate
+ * @vlanmc: the pointer will be assigned to a pointer to a valid member config
+ * if successful
+ * @return: index of a new member config or negative error number
+ */
+static int rtl8366_obtain_mc(struct realtek_priv *priv, int vid,
+			     struct rtl8366_vlan_mc *vlanmc)
+{
+	struct rtl8366_vlan_4k vlan4k;
+	int ret;
+	int i;
+
+	/* Try to find an existing member config entry for this VID */
+	for (i = 0; i < priv->num_vlan_mc; i++) {
+		ret = priv->ops->get_vlan_mc(priv, i, vlanmc);
+		if (ret) {
+			dev_err(priv->dev, "error searching for VLAN MC %d for VID %d\n",
+				i, vid);
+			return ret;
+		}
+
+		if (vid == vlanmc->vid)
+			return i;
+	}
+
+	/* We have no MC entry for this VID, try to find an empty one */
+	for (i = 0; i < priv->num_vlan_mc; i++) {
+		ret = priv->ops->get_vlan_mc(priv, i, vlanmc);
+		if (ret) {
+			dev_err(priv->dev, "error searching for VLAN MC %d for VID %d\n",
+				i, vid);
+			return ret;
+		}
+
+		if (vlanmc->vid == 0 && vlanmc->member == 0) {
+			/* Update the entry from the 4K table */
+			ret = priv->ops->get_vlan_4k(priv, vid, &vlan4k);
+			if (ret) {
+				dev_err(priv->dev, "error looking for 4K VLAN MC %d for VID %d\n",
+					i, vid);
+				return ret;
+			}
+
+			vlanmc->vid = vid;
+			vlanmc->member = vlan4k.member;
+			vlanmc->untag = vlan4k.untag;
+			vlanmc->fid = vlan4k.fid;
+			ret = priv->ops->set_vlan_mc(priv, i, vlanmc);
+			if (ret) {
+				dev_err(priv->dev, "unable to set/update VLAN MC %d for VID %d\n",
+					i, vid);
+				return ret;
+			}
+
+			dev_dbg(priv->dev, "created new MC at index %d for VID %d\n",
+				i, vid);
+			return i;
+		}
+	}
+
+	/* MC table is full, try to find an unused entry and replace it */
+	for (i = 0; i < priv->num_vlan_mc; i++) {
+		int used;
+
+		ret = rtl8366_mc_is_used(priv, i, &used);
+		if (ret)
+			return ret;
+
+		if (!used) {
+			/* Update the entry from the 4K table */
+			ret = priv->ops->get_vlan_4k(priv, vid, &vlan4k);
+			if (ret)
+				return ret;
+
+			vlanmc->vid = vid;
+			vlanmc->member = vlan4k.member;
+			vlanmc->untag = vlan4k.untag;
+			vlanmc->fid = vlan4k.fid;
+			ret = priv->ops->set_vlan_mc(priv, i, vlanmc);
+			if (ret) {
+				dev_err(priv->dev, "unable to set/update VLAN MC %d for VID %d\n",
+					i, vid);
+				return ret;
+			}
+			dev_dbg(priv->dev, "recycled MC at index %i for VID %d\n",
+				i, vid);
+			return i;
+		}
+	}
+
+	dev_err(priv->dev, "all VLAN member configurations are in use\n");
+	return -ENOSPC;
+}
+
+int rtl8366_set_vlan(struct realtek_priv *priv, int vid, u32 member,
+		     u32 untag, u32 fid)
+{
+	struct rtl8366_vlan_mc vlanmc;
+	struct rtl8366_vlan_4k vlan4k;
+	int mc;
+	int ret;
+
+	if (!priv->ops->is_vlan_valid(priv, vid))
+		return -EINVAL;
+
+	dev_dbg(priv->dev,
+		"setting VLAN%d 4k members: 0x%02x, untagged: 0x%02x\n",
+		vid, member, untag);
+
+	/* Update the 4K table */
+	ret = priv->ops->get_vlan_4k(priv, vid, &vlan4k);
+	if (ret)
+		return ret;
+
+	vlan4k.member |= member;
+	vlan4k.untag |= untag;
+	vlan4k.fid = fid;
+	ret = priv->ops->set_vlan_4k(priv, &vlan4k);
+	if (ret)
+		return ret;
+
+	dev_dbg(priv->dev,
+		"resulting VLAN%d 4k members: 0x%02x, untagged: 0x%02x\n",
+		vid, vlan4k.member, vlan4k.untag);
+
+	/* Find or allocate a member config for this VID */
+	ret = rtl8366_obtain_mc(priv, vid, &vlanmc);
+	if (ret < 0)
+		return ret;
+	mc = ret;
+
+	/* Update the MC entry */
+	vlanmc.member |= member;
+	vlanmc.untag |= untag;
+	vlanmc.fid = fid;
+
+	/* Commit updates to the MC entry */
+	ret = priv->ops->set_vlan_mc(priv, mc, &vlanmc);
+	if (ret)
+		dev_err(priv->dev, "failed to commit changes to VLAN MC index %d for VID %d\n",
+			mc, vid);
+	else
+		dev_dbg(priv->dev,
+			"resulting VLAN%d MC members: 0x%02x, untagged: 0x%02x\n",
+			vid, vlanmc.member, vlanmc.untag);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(rtl8366_set_vlan);
+
+int rtl8366_set_pvid(struct realtek_priv *priv, unsigned int port,
+		     unsigned int vid)
+{
+	struct rtl8366_vlan_mc vlanmc;
+	int mc;
+	int ret;
+
+	if (!priv->ops->is_vlan_valid(priv, vid))
+		return -EINVAL;
+
+	/* Find or allocate a member config for this VID */
+	ret = rtl8366_obtain_mc(priv, vid, &vlanmc);
+	if (ret < 0)
+		return ret;
+	mc = ret;
+
+	ret = priv->ops->set_mc_index(priv, port, mc);
+	if (ret) {
+		dev_err(priv->dev, "set PVID: failed to set MC index %d for port %d\n",
+			mc, port);
+		return ret;
+	}
+
+	dev_dbg(priv->dev, "set PVID: the PVID for port %d set to %d using existing MC index %d\n",
+		port, vid, mc);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtl8366_set_pvid);
+
+int rtl8366_enable_vlan4k(struct realtek_priv *priv, bool enable)
+{
+	int ret;
+
+	/* To enable 4k VLAN, ordinary VLAN must be enabled first,
+	 * but if we disable 4k VLAN it is fine to leave ordinary
+	 * VLAN enabled.
+	 */
+	if (enable) {
+		/* Make sure VLAN is ON */
+		ret = priv->ops->enable_vlan(priv, true);
+		if (ret)
+			return ret;
+
+		priv->vlan_enabled = true;
+	}
+
+	ret = priv->ops->enable_vlan4k(priv, enable);
+	if (ret)
+		return ret;
+
+	priv->vlan4k_enabled = enable;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtl8366_enable_vlan4k);
+
+int rtl8366_enable_vlan(struct realtek_priv *priv, bool enable)
+{
+	int ret;
+
+	ret = priv->ops->enable_vlan(priv, enable);
+	if (ret)
+		return ret;
+
+	priv->vlan_enabled = enable;
+
+	/* If we turn VLAN off, make sure that we turn off
+	 * 4k VLAN as well, if that happened to be on.
+	 */
+	if (!enable) {
+		priv->vlan4k_enabled = false;
+		ret = priv->ops->enable_vlan4k(priv, false);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(rtl8366_enable_vlan);
+
+int rtl8366_reset_vlan(struct realtek_priv *priv)
+{
+	struct rtl8366_vlan_mc vlanmc;
+	int ret;
+	int i;
+
+	rtl8366_enable_vlan(priv, false);
+	rtl8366_enable_vlan4k(priv, false);
+
+	/* Clear the 16 VLAN member configurations */
+	vlanmc.vid = 0;
+	vlanmc.priority = 0;
+	vlanmc.member = 0;
+	vlanmc.untag = 0;
+	vlanmc.fid = 0;
+	for (i = 0; i < priv->num_vlan_mc; i++) {
+		ret = priv->ops->set_vlan_mc(priv, i, &vlanmc);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtl8366_reset_vlan);
+
+int rtl8366_vlan_add(struct dsa_switch *ds, int port,
+		     const struct switchdev_obj_port_vlan *vlan,
+		     struct netlink_ext_ack *extack)
+{
+	bool untagged = !!(vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED);
+	bool pvid = !!(vlan->flags & BRIDGE_VLAN_INFO_PVID);
+	struct realtek_priv *priv = ds->priv;
+	u32 member = 0;
+	u32 untag = 0;
+	int ret;
+
+	if (!priv->ops->is_vlan_valid(priv, vlan->vid)) {
+		NL_SET_ERR_MSG_MOD(extack, "VLAN ID not valid");
+		return -EINVAL;
+	}
+
+	/* Enable VLAN in the hardware
+	 * FIXME: what's with this 4k business?
+	 * Just rtl8366_enable_vlan() seems inconclusive.
+	 */
+	ret = rtl8366_enable_vlan4k(priv, true);
+	if (ret) {
+		NL_SET_ERR_MSG_MOD(extack, "Failed to enable VLAN 4K");
+		return ret;
+	}
+
+	dev_dbg(priv->dev, "add VLAN %d on port %d, %s, %s\n",
+		vlan->vid, port, untagged ? "untagged" : "tagged",
+		pvid ? "PVID" : "no PVID");
+
+	member |= BIT(port);
+
+	if (untagged)
+		untag |= BIT(port);
+
+	ret = rtl8366_set_vlan(priv, vlan->vid, member, untag, 0);
+	if (ret) {
+		dev_err(priv->dev, "failed to set up VLAN %04x", vlan->vid);
+		return ret;
+	}
+
+	if (!pvid)
+		return 0;
+
+	ret = rtl8366_set_pvid(priv, port, vlan->vid);
+	if (ret) {
+		dev_err(priv->dev, "failed to set PVID on port %d to VLAN %04x",
+			port, vlan->vid);
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtl8366_vlan_add);
+
+int rtl8366_vlan_del(struct dsa_switch *ds, int port,
+		     const struct switchdev_obj_port_vlan *vlan)
+{
+	struct realtek_priv *priv = ds->priv;
+	int ret, i;
+
+	dev_dbg(priv->dev, "del VLAN %d on port %d\n", vlan->vid, port);
+
+	for (i = 0; i < priv->num_vlan_mc; i++) {
+		struct rtl8366_vlan_mc vlanmc;
+
+		ret = priv->ops->get_vlan_mc(priv, i, &vlanmc);
+		if (ret)
+			return ret;
+
+		if (vlan->vid == vlanmc.vid) {
+			/* Remove this port from the VLAN */
+			vlanmc.member &= ~BIT(port);
+			vlanmc.untag &= ~BIT(port);
+			/*
+			 * If no ports are members of this VLAN
+			 * anymore then clear the whole member
+			 * config so it can be reused.
+			 */
+			if (!vlanmc.member) {
+				vlanmc.vid = 0;
+				vlanmc.priority = 0;
+				vlanmc.fid = 0;
+			}
+			ret = priv->ops->set_vlan_mc(priv, i, &vlanmc);
+			if (ret) {
+				dev_err(priv->dev,
+					"failed to remove VLAN %04x\n",
+					vlan->vid);
+				return ret;
+			}
+			break;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtl8366_vlan_del);
+
+void rtl8366_get_strings(struct dsa_switch *ds, int port, u32 stringset,
+			 uint8_t *data)
+{
+	struct realtek_priv *priv = ds->priv;
+	struct rtl8366_mib_counter *mib;
+	int i;
+
+	if (port >= priv->num_ports)
+		return;
+
+	for (i = 0; i < priv->num_mib_counters; i++) {
+		mib = &priv->mib_counters[i];
+		strncpy(data + i * ETH_GSTRING_LEN,
+			mib->name, ETH_GSTRING_LEN);
+	}
+}
+EXPORT_SYMBOL_GPL(rtl8366_get_strings);
+
+int rtl8366_get_sset_count(struct dsa_switch *ds, int port, int sset)
+{
+	struct realtek_priv *priv = ds->priv;
+
+	/* We only support SS_STATS */
+	if (sset != ETH_SS_STATS)
+		return 0;
+	if (port >= priv->num_ports)
+		return -EINVAL;
+
+	return priv->num_mib_counters;
+}
+EXPORT_SYMBOL_GPL(rtl8366_get_sset_count);
+
+void rtl8366_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data)
+{
+	struct realtek_priv *priv = ds->priv;
+	int i;
+	int ret;
+
+	if (port >= priv->num_ports)
+		return;
+
+	for (i = 0; i < priv->num_mib_counters; i++) {
+		struct rtl8366_mib_counter *mib;
+		u64 mibvalue = 0;
+
+		mib = &priv->mib_counters[i];
+		ret = priv->ops->get_mib_counter(priv, port, mib, &mibvalue);
+		if (ret) {
+			dev_err(priv->dev, "error reading MIB counter %s\n",
+				mib->name);
+		}
+		data[i] = mibvalue;
+	}
+}
+EXPORT_SYMBOL_GPL(rtl8366_get_ethtool_stats);