Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 855 insertions, 0 deletions

diff --git a/drivers/net/dsa/sja1105/sja1105_clocking.c b/drivers/net/dsa/sja1105/sja1105_clocking.c
new file mode 100644
index 000000000..e3699f76f
--- /dev/null
+++ b/drivers/net/dsa/sja1105/sja1105_clocking.c
@@ -0,0 +1,855 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/* Copyright 2016-2018 NXP
+ * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com>
+ */
+#include <linux/packing.h>
+#include "sja1105.h"
+
+#define SJA1105_SIZE_CGU_CMD	4
+#define SJA1110_BASE_MCSS_CLK	SJA1110_CGU_ADDR(0x70)
+#define SJA1110_BASE_TIMER_CLK	SJA1110_CGU_ADDR(0x74)
+
+/* Common structure for CFG_PAD_MIIx_RX and CFG_PAD_MIIx_TX */
+struct sja1105_cfg_pad_mii {
+	u64 d32_os;
+	u64 d32_ih;
+	u64 d32_ipud;
+	u64 d10_ih;
+	u64 d10_os;
+	u64 d10_ipud;
+	u64 ctrl_os;
+	u64 ctrl_ih;
+	u64 ctrl_ipud;
+	u64 clk_os;
+	u64 clk_ih;
+	u64 clk_ipud;
+};
+
+struct sja1105_cfg_pad_mii_id {
+	u64 rxc_stable_ovr;
+	u64 rxc_delay;
+	u64 rxc_bypass;
+	u64 rxc_pd;
+	u64 txc_stable_ovr;
+	u64 txc_delay;
+	u64 txc_bypass;
+	u64 txc_pd;
+};
+
+/* UM10944 Table 82.
+ * IDIV_0_C to IDIV_4_C control registers
+ * (addr. 10000Bh to 10000Fh)
+ */
+struct sja1105_cgu_idiv {
+	u64 clksrc;
+	u64 autoblock;
+	u64 idiv;
+	u64 pd;
+};
+
+/* PLL_1_C control register
+ *
+ * SJA1105 E/T: UM10944 Table 81 (address 10000Ah)
+ * SJA1105 P/Q/R/S: UM11040 Table 116 (address 10000Ah)
+ */
+struct sja1105_cgu_pll_ctrl {
+	u64 pllclksrc;
+	u64 msel;
+	u64 autoblock;
+	u64 psel;
+	u64 direct;
+	u64 fbsel;
+	u64 bypass;
+	u64 pd;
+};
+
+struct sja1110_cgu_outclk {
+	u64 clksrc;
+	u64 autoblock;
+	u64 pd;
+};
+
+enum {
+	CLKSRC_MII0_TX_CLK	= 0x00,
+	CLKSRC_MII0_RX_CLK	= 0x01,
+	CLKSRC_MII1_TX_CLK	= 0x02,
+	CLKSRC_MII1_RX_CLK	= 0x03,
+	CLKSRC_MII2_TX_CLK	= 0x04,
+	CLKSRC_MII2_RX_CLK	= 0x05,
+	CLKSRC_MII3_TX_CLK	= 0x06,
+	CLKSRC_MII3_RX_CLK	= 0x07,
+	CLKSRC_MII4_TX_CLK	= 0x08,
+	CLKSRC_MII4_RX_CLK	= 0x09,
+	CLKSRC_PLL0		= 0x0B,
+	CLKSRC_PLL1		= 0x0E,
+	CLKSRC_IDIV0		= 0x11,
+	CLKSRC_IDIV1		= 0x12,
+	CLKSRC_IDIV2		= 0x13,
+	CLKSRC_IDIV3		= 0x14,
+	CLKSRC_IDIV4		= 0x15,
+};
+
+/* UM10944 Table 83.
+ * MIIx clock control registers 1 to 30
+ * (addresses 100013h to 100035h)
+ */
+struct sja1105_cgu_mii_ctrl {
+	u64 clksrc;
+	u64 autoblock;
+	u64 pd;
+};
+
+static void sja1105_cgu_idiv_packing(void *buf, struct sja1105_cgu_idiv *idiv,
+				     enum packing_op op)
+{
+	const int size = 4;
+
+	sja1105_packing(buf, &idiv->clksrc,    28, 24, size, op);
+	sja1105_packing(buf, &idiv->autoblock, 11, 11, size, op);
+	sja1105_packing(buf, &idiv->idiv,       5,  2, size, op);
+	sja1105_packing(buf, &idiv->pd,         0,  0, size, op);
+}
+
+static int sja1105_cgu_idiv_config(struct sja1105_private *priv, int port,
+				   bool enabled, int factor)
+{
+	const struct sja1105_regs *regs = priv->info->regs;
+	struct device *dev = priv->ds->dev;
+	struct sja1105_cgu_idiv idiv;
+	u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
+
+	if (regs->cgu_idiv[port] == SJA1105_RSV_ADDR)
+		return 0;
+
+	if (enabled && factor != 1 && factor != 10) {
+		dev_err(dev, "idiv factor must be 1 or 10\n");
+		return -ERANGE;
+	}
+
+	/* Payload for packed_buf */
+	idiv.clksrc    = 0x0A;            /* 25MHz */
+	idiv.autoblock = 1;               /* Block clk automatically */
+	idiv.idiv      = factor - 1;      /* Divide by 1 or 10 */
+	idiv.pd        = enabled ? 0 : 1; /* Power down? */
+	sja1105_cgu_idiv_packing(packed_buf, &idiv, PACK);
+
+	return sja1105_xfer_buf(priv, SPI_WRITE, regs->cgu_idiv[port],
+				packed_buf, SJA1105_SIZE_CGU_CMD);
+}
+
+static void
+sja1105_cgu_mii_control_packing(void *buf, struct sja1105_cgu_mii_ctrl *cmd,
+				enum packing_op op)
+{
+	const int size = 4;
+
+	sja1105_packing(buf, &cmd->clksrc,    28, 24, size, op);
+	sja1105_packing(buf, &cmd->autoblock, 11, 11, size, op);
+	sja1105_packing(buf, &cmd->pd,         0,  0, size, op);
+}
+
+static int sja1105_cgu_mii_tx_clk_config(struct sja1105_private *priv,
+					 int port, sja1105_mii_role_t role)
+{
+	const struct sja1105_regs *regs = priv->info->regs;
+	struct sja1105_cgu_mii_ctrl mii_tx_clk;
+	const int mac_clk_sources[] = {
+		CLKSRC_MII0_TX_CLK,
+		CLKSRC_MII1_TX_CLK,
+		CLKSRC_MII2_TX_CLK,
+		CLKSRC_MII3_TX_CLK,
+		CLKSRC_MII4_TX_CLK,
+	};
+	const int phy_clk_sources[] = {
+		CLKSRC_IDIV0,
+		CLKSRC_IDIV1,
+		CLKSRC_IDIV2,
+		CLKSRC_IDIV3,
+		CLKSRC_IDIV4,
+	};
+	u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
+	int clksrc;
+
+	if (regs->mii_tx_clk[port] == SJA1105_RSV_ADDR)
+		return 0;
+
+	if (role == XMII_MAC)
+		clksrc = mac_clk_sources[port];
+	else
+		clksrc = phy_clk_sources[port];
+
+	/* Payload for packed_buf */
+	mii_tx_clk.clksrc    = clksrc;
+	mii_tx_clk.autoblock = 1;  /* Autoblock clk while changing clksrc */
+	mii_tx_clk.pd        = 0;  /* Power Down off => enabled */
+	sja1105_cgu_mii_control_packing(packed_buf, &mii_tx_clk, PACK);
+
+	return sja1105_xfer_buf(priv, SPI_WRITE, regs->mii_tx_clk[port],
+				packed_buf, SJA1105_SIZE_CGU_CMD);
+}
+
+static int
+sja1105_cgu_mii_rx_clk_config(struct sja1105_private *priv, int port)
+{
+	const struct sja1105_regs *regs = priv->info->regs;
+	struct sja1105_cgu_mii_ctrl mii_rx_clk;
+	u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
+	const int clk_sources[] = {
+		CLKSRC_MII0_RX_CLK,
+		CLKSRC_MII1_RX_CLK,
+		CLKSRC_MII2_RX_CLK,
+		CLKSRC_MII3_RX_CLK,
+		CLKSRC_MII4_RX_CLK,
+	};
+
+	if (regs->mii_rx_clk[port] == SJA1105_RSV_ADDR)
+		return 0;
+
+	/* Payload for packed_buf */
+	mii_rx_clk.clksrc    = clk_sources[port];
+	mii_rx_clk.autoblock = 1;  /* Autoblock clk while changing clksrc */
+	mii_rx_clk.pd        = 0;  /* Power Down off => enabled */
+	sja1105_cgu_mii_control_packing(packed_buf, &mii_rx_clk, PACK);
+
+	return sja1105_xfer_buf(priv, SPI_WRITE, regs->mii_rx_clk[port],
+				packed_buf, SJA1105_SIZE_CGU_CMD);
+}
+
+static int
+sja1105_cgu_mii_ext_tx_clk_config(struct sja1105_private *priv, int port)
+{
+	const struct sja1105_regs *regs = priv->info->regs;
+	struct sja1105_cgu_mii_ctrl mii_ext_tx_clk;
+	u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
+	const int clk_sources[] = {
+		CLKSRC_IDIV0,
+		CLKSRC_IDIV1,
+		CLKSRC_IDIV2,
+		CLKSRC_IDIV3,
+		CLKSRC_IDIV4,
+	};
+
+	if (regs->mii_ext_tx_clk[port] == SJA1105_RSV_ADDR)
+		return 0;
+
+	/* Payload for packed_buf */
+	mii_ext_tx_clk.clksrc    = clk_sources[port];
+	mii_ext_tx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */
+	mii_ext_tx_clk.pd        = 0; /* Power Down off => enabled */
+	sja1105_cgu_mii_control_packing(packed_buf, &mii_ext_tx_clk, PACK);
+
+	return sja1105_xfer_buf(priv, SPI_WRITE, regs->mii_ext_tx_clk[port],
+				packed_buf, SJA1105_SIZE_CGU_CMD);
+}
+
+static int
+sja1105_cgu_mii_ext_rx_clk_config(struct sja1105_private *priv, int port)
+{
+	const struct sja1105_regs *regs = priv->info->regs;
+	struct sja1105_cgu_mii_ctrl mii_ext_rx_clk;
+	u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
+	const int clk_sources[] = {
+		CLKSRC_IDIV0,
+		CLKSRC_IDIV1,
+		CLKSRC_IDIV2,
+		CLKSRC_IDIV3,
+		CLKSRC_IDIV4,
+	};
+
+	if (regs->mii_ext_rx_clk[port] == SJA1105_RSV_ADDR)
+		return 0;
+
+	/* Payload for packed_buf */
+	mii_ext_rx_clk.clksrc    = clk_sources[port];
+	mii_ext_rx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */
+	mii_ext_rx_clk.pd        = 0; /* Power Down off => enabled */
+	sja1105_cgu_mii_control_packing(packed_buf, &mii_ext_rx_clk, PACK);
+
+	return sja1105_xfer_buf(priv, SPI_WRITE, regs->mii_ext_rx_clk[port],
+				packed_buf, SJA1105_SIZE_CGU_CMD);
+}
+
+static int sja1105_mii_clocking_setup(struct sja1105_private *priv, int port,
+				      sja1105_mii_role_t role)
+{
+	struct device *dev = priv->ds->dev;
+	int rc;
+
+	dev_dbg(dev, "Configuring MII-%s clocking\n",
+		(role == XMII_MAC) ? "MAC" : "PHY");
+	/* If role is MAC, disable IDIV
+	 * If role is PHY, enable IDIV and configure for 1/1 divider
+	 */
+	rc = sja1105_cgu_idiv_config(priv, port, (role == XMII_PHY), 1);
+	if (rc < 0)
+		return rc;
+
+	/* Configure CLKSRC of MII_TX_CLK_n
+	 *   * If role is MAC, select TX_CLK_n
+	 *   * If role is PHY, select IDIV_n
+	 */
+	rc = sja1105_cgu_mii_tx_clk_config(priv, port, role);
+	if (rc < 0)
+		return rc;
+
+	/* Configure CLKSRC of MII_RX_CLK_n
+	 * Select RX_CLK_n
+	 */
+	rc = sja1105_cgu_mii_rx_clk_config(priv, port);
+	if (rc < 0)
+		return rc;
+
+	if (role == XMII_PHY) {
+		/* Per MII spec, the PHY (which is us) drives the TX_CLK pin */
+
+		/* Configure CLKSRC of EXT_TX_CLK_n
+		 * Select IDIV_n
+		 */
+		rc = sja1105_cgu_mii_ext_tx_clk_config(priv, port);
+		if (rc < 0)
+			return rc;
+
+		/* Configure CLKSRC of EXT_RX_CLK_n
+		 * Select IDIV_n
+		 */
+		rc = sja1105_cgu_mii_ext_rx_clk_config(priv, port);
+		if (rc < 0)
+			return rc;
+	}
+	return 0;
+}
+
+static void
+sja1105_cgu_pll_control_packing(void *buf, struct sja1105_cgu_pll_ctrl *cmd,
+				enum packing_op op)
+{
+	const int size = 4;
+
+	sja1105_packing(buf, &cmd->pllclksrc, 28, 24, size, op);
+	sja1105_packing(buf, &cmd->msel,      23, 16, size, op);
+	sja1105_packing(buf, &cmd->autoblock, 11, 11, size, op);
+	sja1105_packing(buf, &cmd->psel,       9,  8, size, op);
+	sja1105_packing(buf, &cmd->direct,     7,  7, size, op);
+	sja1105_packing(buf, &cmd->fbsel,      6,  6, size, op);
+	sja1105_packing(buf, &cmd->bypass,     1,  1, size, op);
+	sja1105_packing(buf, &cmd->pd,         0,  0, size, op);
+}
+
+static int sja1105_cgu_rgmii_tx_clk_config(struct sja1105_private *priv,
+					   int port, u64 speed)
+{
+	const struct sja1105_regs *regs = priv->info->regs;
+	struct sja1105_cgu_mii_ctrl txc;
+	u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
+	int clksrc;
+
+	if (regs->rgmii_tx_clk[port] == SJA1105_RSV_ADDR)
+		return 0;
+
+	if (speed == priv->info->port_speed[SJA1105_SPEED_1000MBPS]) {
+		clksrc = CLKSRC_PLL0;
+	} else {
+		int clk_sources[] = {CLKSRC_IDIV0, CLKSRC_IDIV1, CLKSRC_IDIV2,
+				     CLKSRC_IDIV3, CLKSRC_IDIV4};
+		clksrc = clk_sources[port];
+	}
+
+	/* RGMII: 125MHz for 1000, 25MHz for 100, 2.5MHz for 10 */
+	txc.clksrc = clksrc;
+	/* Autoblock clk while changing clksrc */
+	txc.autoblock = 1;
+	/* Power Down off => enabled */
+	txc.pd = 0;
+	sja1105_cgu_mii_control_packing(packed_buf, &txc, PACK);
+
+	return sja1105_xfer_buf(priv, SPI_WRITE, regs->rgmii_tx_clk[port],
+				packed_buf, SJA1105_SIZE_CGU_CMD);
+}
+
+/* AGU */
+static void
+sja1105_cfg_pad_mii_packing(void *buf, struct sja1105_cfg_pad_mii *cmd,
+			    enum packing_op op)
+{
+	const int size = 4;
+
+	sja1105_packing(buf, &cmd->d32_os,   28, 27, size, op);
+	sja1105_packing(buf, &cmd->d32_ih,   26, 26, size, op);
+	sja1105_packing(buf, &cmd->d32_ipud, 25, 24, size, op);
+	sja1105_packing(buf, &cmd->d10_os,   20, 19, size, op);
+	sja1105_packing(buf, &cmd->d10_ih,   18, 18, size, op);
+	sja1105_packing(buf, &cmd->d10_ipud, 17, 16, size, op);
+	sja1105_packing(buf, &cmd->ctrl_os,  12, 11, size, op);
+	sja1105_packing(buf, &cmd->ctrl_ih,  10, 10, size, op);
+	sja1105_packing(buf, &cmd->ctrl_ipud, 9,  8, size, op);
+	sja1105_packing(buf, &cmd->clk_os,    4,  3, size, op);
+	sja1105_packing(buf, &cmd->clk_ih,    2,  2, size, op);
+	sja1105_packing(buf, &cmd->clk_ipud,  1,  0, size, op);
+}
+
+static int sja1105_rgmii_cfg_pad_tx_config(struct sja1105_private *priv,
+					   int port)
+{
+	const struct sja1105_regs *regs = priv->info->regs;
+	struct sja1105_cfg_pad_mii pad_mii_tx = {0};
+	u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
+
+	if (regs->pad_mii_tx[port] == SJA1105_RSV_ADDR)
+		return 0;
+
+	/* Payload */
+	pad_mii_tx.d32_os    = 3; /* TXD[3:2] output stage: */
+				  /*          high noise/high speed */
+	pad_mii_tx.d10_os    = 3; /* TXD[1:0] output stage: */
+				  /*          high noise/high speed */
+	pad_mii_tx.d32_ipud  = 2; /* TXD[3:2] input stage: */
+				  /*          plain input (default) */
+	pad_mii_tx.d10_ipud  = 2; /* TXD[1:0] input stage: */
+				  /*          plain input (default) */
+	pad_mii_tx.ctrl_os   = 3; /* TX_CTL / TX_ER output stage */
+	pad_mii_tx.ctrl_ipud = 2; /* TX_CTL / TX_ER input stage (default) */
+	pad_mii_tx.clk_os    = 3; /* TX_CLK output stage */
+	pad_mii_tx.clk_ih    = 0; /* TX_CLK input hysteresis (default) */
+	pad_mii_tx.clk_ipud  = 2; /* TX_CLK input stage (default) */
+	sja1105_cfg_pad_mii_packing(packed_buf, &pad_mii_tx, PACK);
+
+	return sja1105_xfer_buf(priv, SPI_WRITE, regs->pad_mii_tx[port],
+				packed_buf, SJA1105_SIZE_CGU_CMD);
+}
+
+static int sja1105_cfg_pad_rx_config(struct sja1105_private *priv, int port)
+{
+	const struct sja1105_regs *regs = priv->info->regs;
+	struct sja1105_cfg_pad_mii pad_mii_rx = {0};
+	u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
+
+	if (regs->pad_mii_rx[port] == SJA1105_RSV_ADDR)
+		return 0;
+
+	/* Payload */
+	pad_mii_rx.d32_ih    = 0; /* RXD[3:2] input stage hysteresis: */
+				  /*          non-Schmitt (default) */
+	pad_mii_rx.d32_ipud  = 2; /* RXD[3:2] input weak pull-up/down */
+				  /*          plain input (default) */
+	pad_mii_rx.d10_ih    = 0; /* RXD[1:0] input stage hysteresis: */
+				  /*          non-Schmitt (default) */
+	pad_mii_rx.d10_ipud  = 2; /* RXD[1:0] input weak pull-up/down */
+				  /*          plain input (default) */
+	pad_mii_rx.ctrl_ih   = 0; /* RX_DV/CRS_DV/RX_CTL and RX_ER */
+				  /* input stage hysteresis: */
+				  /* non-Schmitt (default) */
+	pad_mii_rx.ctrl_ipud = 3; /* RX_DV/CRS_DV/RX_CTL and RX_ER */
+				  /* input stage weak pull-up/down: */
+				  /* pull-down */
+	pad_mii_rx.clk_os    = 2; /* RX_CLK/RXC output stage: */
+				  /* medium noise/fast speed (default) */
+	pad_mii_rx.clk_ih    = 0; /* RX_CLK/RXC input hysteresis: */
+				  /* non-Schmitt (default) */
+	pad_mii_rx.clk_ipud  = 2; /* RX_CLK/RXC input pull-up/down: */
+				  /* plain input (default) */
+	sja1105_cfg_pad_mii_packing(packed_buf, &pad_mii_rx, PACK);
+
+	return sja1105_xfer_buf(priv, SPI_WRITE, regs->pad_mii_rx[port],
+				packed_buf, SJA1105_SIZE_CGU_CMD);
+}
+
+static void
+sja1105_cfg_pad_mii_id_packing(void *buf, struct sja1105_cfg_pad_mii_id *cmd,
+			       enum packing_op op)
+{
+	const int size = SJA1105_SIZE_CGU_CMD;
+
+	sja1105_packing(buf, &cmd->rxc_stable_ovr, 15, 15, size, op);
+	sja1105_packing(buf, &cmd->rxc_delay,      14, 10, size, op);
+	sja1105_packing(buf, &cmd->rxc_bypass,      9,  9, size, op);
+	sja1105_packing(buf, &cmd->rxc_pd,          8,  8, size, op);
+	sja1105_packing(buf, &cmd->txc_stable_ovr,  7,  7, size, op);
+	sja1105_packing(buf, &cmd->txc_delay,       6,  2, size, op);
+	sja1105_packing(buf, &cmd->txc_bypass,      1,  1, size, op);
+	sja1105_packing(buf, &cmd->txc_pd,          0,  0, size, op);
+}
+
+static void
+sja1110_cfg_pad_mii_id_packing(void *buf, struct sja1105_cfg_pad_mii_id *cmd,
+			       enum packing_op op)
+{
+	const int size = SJA1105_SIZE_CGU_CMD;
+	u64 range = 4;
+
+	/* Fields RXC_RANGE and TXC_RANGE select the input frequency range:
+	 * 0 = 2.5MHz
+	 * 1 = 25MHz
+	 * 2 = 50MHz
+	 * 3 = 125MHz
+	 * 4 = Automatically determined by port speed.
+	 * There's no point in defining a structure different than the one for
+	 * SJA1105, so just hardcode the frequency range to automatic, just as
+	 * before.
+	 */
+	sja1105_packing(buf, &cmd->rxc_stable_ovr, 26, 26, size, op);
+	sja1105_packing(buf, &cmd->rxc_delay,      25, 21, size, op);
+	sja1105_packing(buf, &range,               20, 18, size, op);
+	sja1105_packing(buf, &cmd->rxc_bypass,     17, 17, size, op);
+	sja1105_packing(buf, &cmd->rxc_pd,         16, 16, size, op);
+	sja1105_packing(buf, &cmd->txc_stable_ovr, 10, 10, size, op);
+	sja1105_packing(buf, &cmd->txc_delay,       9,  5, size, op);
+	sja1105_packing(buf, &range,                4,  2, size, op);
+	sja1105_packing(buf, &cmd->txc_bypass,      1,  1, size, op);
+	sja1105_packing(buf, &cmd->txc_pd,          0,  0, size, op);
+}
+
+/* The RGMII delay setup procedure is 2-step and gets called upon each
+ * .phylink_mac_config. Both are strategic.
+ * The reason is that the RX Tunable Delay Line of the SJA1105 MAC has issues
+ * with recovering from a frequency change of the link partner's RGMII clock.
+ * The easiest way to recover from this is to temporarily power down the TDL,
+ * as it will re-lock at the new frequency afterwards.
+ */
+int sja1105pqrs_setup_rgmii_delay(const void *ctx, int port)
+{
+	const struct sja1105_private *priv = ctx;
+	const struct sja1105_regs *regs = priv->info->regs;
+	struct sja1105_cfg_pad_mii_id pad_mii_id = {0};
+	int rx_delay = priv->rgmii_rx_delay_ps[port];
+	int tx_delay = priv->rgmii_tx_delay_ps[port];
+	u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
+	int rc;
+
+	if (rx_delay)
+		pad_mii_id.rxc_delay = SJA1105_RGMII_DELAY_PS_TO_HW(rx_delay);
+	if (tx_delay)
+		pad_mii_id.txc_delay = SJA1105_RGMII_DELAY_PS_TO_HW(tx_delay);
+
+	/* Stage 1: Turn the RGMII delay lines off. */
+	pad_mii_id.rxc_bypass = 1;
+	pad_mii_id.rxc_pd = 1;
+	pad_mii_id.txc_bypass = 1;
+	pad_mii_id.txc_pd = 1;
+	sja1105_cfg_pad_mii_id_packing(packed_buf, &pad_mii_id, PACK);
+
+	rc = sja1105_xfer_buf(priv, SPI_WRITE, regs->pad_mii_id[port],
+			      packed_buf, SJA1105_SIZE_CGU_CMD);
+	if (rc < 0)
+		return rc;
+
+	/* Stage 2: Turn the RGMII delay lines on. */
+	if (rx_delay) {
+		pad_mii_id.rxc_bypass = 0;
+		pad_mii_id.rxc_pd = 0;
+	}
+	if (tx_delay) {
+		pad_mii_id.txc_bypass = 0;
+		pad_mii_id.txc_pd = 0;
+	}
+	sja1105_cfg_pad_mii_id_packing(packed_buf, &pad_mii_id, PACK);
+
+	return sja1105_xfer_buf(priv, SPI_WRITE, regs->pad_mii_id[port],
+				packed_buf, SJA1105_SIZE_CGU_CMD);
+}
+
+int sja1110_setup_rgmii_delay(const void *ctx, int port)
+{
+	const struct sja1105_private *priv = ctx;
+	const struct sja1105_regs *regs = priv->info->regs;
+	struct sja1105_cfg_pad_mii_id pad_mii_id = {0};
+	int rx_delay = priv->rgmii_rx_delay_ps[port];
+	int tx_delay = priv->rgmii_tx_delay_ps[port];
+	u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
+
+	pad_mii_id.rxc_pd = 1;
+	pad_mii_id.txc_pd = 1;
+
+	if (rx_delay) {
+		pad_mii_id.rxc_delay = SJA1105_RGMII_DELAY_PS_TO_HW(rx_delay);
+		/* The "BYPASS" bit in SJA1110 is actually a "don't bypass" */
+		pad_mii_id.rxc_bypass = 1;
+		pad_mii_id.rxc_pd = 0;
+	}
+
+	if (tx_delay) {
+		pad_mii_id.txc_delay = SJA1105_RGMII_DELAY_PS_TO_HW(tx_delay);
+		pad_mii_id.txc_bypass = 1;
+		pad_mii_id.txc_pd = 0;
+	}
+
+	sja1110_cfg_pad_mii_id_packing(packed_buf, &pad_mii_id, PACK);
+
+	return sja1105_xfer_buf(priv, SPI_WRITE, regs->pad_mii_id[port],
+				packed_buf, SJA1105_SIZE_CGU_CMD);
+}
+
+static int sja1105_rgmii_clocking_setup(struct sja1105_private *priv, int port,
+					sja1105_mii_role_t role)
+{
+	struct device *dev = priv->ds->dev;
+	struct sja1105_mac_config_entry *mac;
+	u64 speed;
+	int rc;
+
+	mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries;
+	speed = mac[port].speed;
+
+	dev_dbg(dev, "Configuring port %d RGMII at speed %lldMbps\n",
+		port, speed);
+
+	if (speed == priv->info->port_speed[SJA1105_SPEED_1000MBPS]) {
+		/* 1000Mbps, IDIV disabled (125 MHz) */
+		rc = sja1105_cgu_idiv_config(priv, port, false, 1);
+	} else if (speed == priv->info->port_speed[SJA1105_SPEED_100MBPS]) {
+		/* 100Mbps, IDIV enabled, divide by 1 (25 MHz) */
+		rc = sja1105_cgu_idiv_config(priv, port, true, 1);
+	} else if (speed == priv->info->port_speed[SJA1105_SPEED_10MBPS]) {
+		/* 10Mbps, IDIV enabled, divide by 10 (2.5 MHz) */
+		rc = sja1105_cgu_idiv_config(priv, port, true, 10);
+	} else if (speed == priv->info->port_speed[SJA1105_SPEED_AUTO]) {
+		/* Skip CGU configuration if there is no speed available
+		 * (e.g. link is not established yet)
+		 */
+		dev_dbg(dev, "Speed not available, skipping CGU config\n");
+		return 0;
+	} else {
+		rc = -EINVAL;
+	}
+
+	if (rc < 0) {
+		dev_err(dev, "Failed to configure idiv\n");
+		return rc;
+	}
+	rc = sja1105_cgu_rgmii_tx_clk_config(priv, port, speed);
+	if (rc < 0) {
+		dev_err(dev, "Failed to configure RGMII Tx clock\n");
+		return rc;
+	}
+	rc = sja1105_rgmii_cfg_pad_tx_config(priv, port);
+	if (rc < 0) {
+		dev_err(dev, "Failed to configure Tx pad registers\n");
+		return rc;
+	}
+
+	if (!priv->info->setup_rgmii_delay)
+		return 0;
+
+	return priv->info->setup_rgmii_delay(priv, port);
+}
+
+static int sja1105_cgu_rmii_ref_clk_config(struct sja1105_private *priv,
+					   int port)
+{
+	const struct sja1105_regs *regs = priv->info->regs;
+	struct sja1105_cgu_mii_ctrl ref_clk;
+	u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
+	const int clk_sources[] = {
+		CLKSRC_MII0_TX_CLK,
+		CLKSRC_MII1_TX_CLK,
+		CLKSRC_MII2_TX_CLK,
+		CLKSRC_MII3_TX_CLK,
+		CLKSRC_MII4_TX_CLK,
+	};
+
+	if (regs->rmii_ref_clk[port] == SJA1105_RSV_ADDR)
+		return 0;
+
+	/* Payload for packed_buf */
+	ref_clk.clksrc    = clk_sources[port];
+	ref_clk.autoblock = 1;      /* Autoblock clk while changing clksrc */
+	ref_clk.pd        = 0;      /* Power Down off => enabled */
+	sja1105_cgu_mii_control_packing(packed_buf, &ref_clk, PACK);
+
+	return sja1105_xfer_buf(priv, SPI_WRITE, regs->rmii_ref_clk[port],
+				packed_buf, SJA1105_SIZE_CGU_CMD);
+}
+
+static int
+sja1105_cgu_rmii_ext_tx_clk_config(struct sja1105_private *priv, int port)
+{
+	const struct sja1105_regs *regs = priv->info->regs;
+	struct sja1105_cgu_mii_ctrl ext_tx_clk;
+	u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
+
+	if (regs->rmii_ext_tx_clk[port] == SJA1105_RSV_ADDR)
+		return 0;
+
+	/* Payload for packed_buf */
+	ext_tx_clk.clksrc    = CLKSRC_PLL1;
+	ext_tx_clk.autoblock = 1;   /* Autoblock clk while changing clksrc */
+	ext_tx_clk.pd        = 0;   /* Power Down off => enabled */
+	sja1105_cgu_mii_control_packing(packed_buf, &ext_tx_clk, PACK);
+
+	return sja1105_xfer_buf(priv, SPI_WRITE, regs->rmii_ext_tx_clk[port],
+				packed_buf, SJA1105_SIZE_CGU_CMD);
+}
+
+static int sja1105_cgu_rmii_pll_config(struct sja1105_private *priv)
+{
+	const struct sja1105_regs *regs = priv->info->regs;
+	u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
+	struct sja1105_cgu_pll_ctrl pll = {0};
+	struct device *dev = priv->ds->dev;
+	int rc;
+
+	if (regs->rmii_pll1 == SJA1105_RSV_ADDR)
+		return 0;
+
+	/* PLL1 must be enabled and output 50 Mhz.
+	 * This is done by writing first 0x0A010941 to
+	 * the PLL_1_C register and then deasserting
+	 * power down (PD) 0x0A010940.
+	 */
+
+	/* Step 1: PLL1 setup for 50Mhz */
+	pll.pllclksrc = 0xA;
+	pll.msel      = 0x1;
+	pll.autoblock = 0x1;
+	pll.psel      = 0x1;
+	pll.direct    = 0x0;
+	pll.fbsel     = 0x1;
+	pll.bypass    = 0x0;
+	pll.pd        = 0x1;
+
+	sja1105_cgu_pll_control_packing(packed_buf, &pll, PACK);
+	rc = sja1105_xfer_buf(priv, SPI_WRITE, regs->rmii_pll1, packed_buf,
+			      SJA1105_SIZE_CGU_CMD);
+	if (rc < 0) {
+		dev_err(dev, "failed to configure PLL1 for 50MHz\n");
+		return rc;
+	}
+
+	/* Step 2: Enable PLL1 */
+	pll.pd = 0x0;
+
+	sja1105_cgu_pll_control_packing(packed_buf, &pll, PACK);
+	rc = sja1105_xfer_buf(priv, SPI_WRITE, regs->rmii_pll1, packed_buf,
+			      SJA1105_SIZE_CGU_CMD);
+	if (rc < 0) {
+		dev_err(dev, "failed to enable PLL1\n");
+		return rc;
+	}
+	return rc;
+}
+
+static int sja1105_rmii_clocking_setup(struct sja1105_private *priv, int port,
+				       sja1105_mii_role_t role)
+{
+	struct device *dev = priv->ds->dev;
+	int rc;
+
+	dev_dbg(dev, "Configuring RMII-%s clocking\n",
+		(role == XMII_MAC) ? "MAC" : "PHY");
+	/* AH1601.pdf chapter 2.5.1. Sources */
+	if (role == XMII_MAC) {
+		/* Configure and enable PLL1 for 50Mhz output */
+		rc = sja1105_cgu_rmii_pll_config(priv);
+		if (rc < 0)
+			return rc;
+	}
+	/* Disable IDIV for this port */
+	rc = sja1105_cgu_idiv_config(priv, port, false, 1);
+	if (rc < 0)
+		return rc;
+	/* Source to sink mappings */
+	rc = sja1105_cgu_rmii_ref_clk_config(priv, port);
+	if (rc < 0)
+		return rc;
+	if (role == XMII_MAC) {
+		rc = sja1105_cgu_rmii_ext_tx_clk_config(priv, port);
+		if (rc < 0)
+			return rc;
+	}
+	return 0;
+}
+
+int sja1105_clocking_setup_port(struct sja1105_private *priv, int port)
+{
+	struct sja1105_xmii_params_entry *mii;
+	struct device *dev = priv->ds->dev;
+	sja1105_phy_interface_t phy_mode;
+	sja1105_mii_role_t role;
+	int rc;
+
+	mii = priv->static_config.tables[BLK_IDX_XMII_PARAMS].entries;
+
+	/* RGMII etc */
+	phy_mode = mii->xmii_mode[port];
+	/* MAC or PHY, for applicable types (not RGMII) */
+	role = mii->phy_mac[port];
+
+	switch (phy_mode) {
+	case XMII_MODE_MII:
+		rc = sja1105_mii_clocking_setup(priv, port, role);
+		break;
+	case XMII_MODE_RMII:
+		rc = sja1105_rmii_clocking_setup(priv, port, role);
+		break;
+	case XMII_MODE_RGMII:
+		rc = sja1105_rgmii_clocking_setup(priv, port, role);
+		break;
+	case XMII_MODE_SGMII:
+		/* Nothing to do in the CGU for SGMII */
+		rc = 0;
+		break;
+	default:
+		dev_err(dev, "Invalid interface mode specified: %d\n",
+			phy_mode);
+		return -EINVAL;
+	}
+	if (rc) {
+		dev_err(dev, "Clocking setup for port %d failed: %d\n",
+			port, rc);
+		return rc;
+	}
+
+	/* Internally pull down the RX_DV/CRS_DV/RX_CTL and RX_ER inputs */
+	return sja1105_cfg_pad_rx_config(priv, port);
+}
+
+int sja1105_clocking_setup(struct sja1105_private *priv)
+{
+	struct dsa_switch *ds = priv->ds;
+	int port, rc;
+
+	for (port = 0; port < ds->num_ports; port++) {
+		rc = sja1105_clocking_setup_port(priv, port);
+		if (rc < 0)
+			return rc;
+	}
+	return 0;
+}
+
+static void
+sja1110_cgu_outclk_packing(void *buf, struct sja1110_cgu_outclk *outclk,
+			   enum packing_op op)
+{
+	const int size = 4;
+
+	sja1105_packing(buf, &outclk->clksrc,    27, 24, size, op);
+	sja1105_packing(buf, &outclk->autoblock, 11, 11, size, op);
+	sja1105_packing(buf, &outclk->pd,         0,  0, size, op);
+}
+
+int sja1110_disable_microcontroller(struct sja1105_private *priv)
+{
+	u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
+	struct sja1110_cgu_outclk outclk_6_c = {
+		.clksrc = 0x3,
+		.pd = true,
+	};
+	struct sja1110_cgu_outclk outclk_7_c = {
+		.clksrc = 0x5,
+		.pd = true,
+	};
+	int rc;
+
+	/* Power down the BASE_TIMER_CLK to disable the watchdog timer */
+	sja1110_cgu_outclk_packing(packed_buf, &outclk_7_c, PACK);
+
+	rc = sja1105_xfer_buf(priv, SPI_WRITE, SJA1110_BASE_TIMER_CLK,
+			      packed_buf, SJA1105_SIZE_CGU_CMD);
+	if (rc)
+		return rc;
+
+	/* Power down the BASE_MCSS_CLOCK to gate the microcontroller off */
+	sja1110_cgu_outclk_packing(packed_buf, &outclk_6_c, PACK);
+
+	return sja1105_xfer_buf(priv, SPI_WRITE, SJA1110_BASE_MCSS_CLK,
+				packed_buf, SJA1105_SIZE_CGU_CMD);
+}