Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 853 insertions, 0 deletions

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v1.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v1.c
new file mode 100644
index 000000000..d16eae415
--- /dev/null
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v1.c
@@ -0,0 +1,853 @@
+/*
+ * AMD 10Gb Ethernet driver
+ *
+ * This file is available to you under your choice of the following two
+ * licenses:
+ *
+ * License 1: GPLv2
+ *
+ * Copyright (c) 2016 Advanced Micro Devices, Inc.
+ *
+ * This file is free software; you may copy, redistribute and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ *     The Synopsys DWC ETHER XGMAC Software Driver and documentation
+ *     (hereinafter "Software") is an unsupported proprietary work of Synopsys,
+ *     Inc. unless otherwise expressly agreed to in writing between Synopsys
+ *     and you.
+ *
+ *     The Software IS NOT an item of Licensed Software or Licensed Product
+ *     under any End User Software License Agreement or Agreement for Licensed
+ *     Product with Synopsys or any supplement thereto.  Permission is hereby
+ *     granted, free of charge, to any person obtaining a copy of this software
+ *     annotated with this license and the Software, to deal in the Software
+ *     without restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or sell copies
+ *     of the Software, and to permit persons to whom the Software is furnished
+ *     to do so, subject to the following conditions:
+ *
+ *     The above copyright notice and this permission notice shall be included
+ *     in all copies or substantial portions of the Software.
+ *
+ *     THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
+ *     BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ *     TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ *     PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS
+ *     BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ *     CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ *     SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ *     INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ *     ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ *     THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * License 2: Modified BSD
+ *
+ * Copyright (c) 2016 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ *     The Synopsys DWC ETHER XGMAC Software Driver and documentation
+ *     (hereinafter "Software") is an unsupported proprietary work of Synopsys,
+ *     Inc. unless otherwise expressly agreed to in writing between Synopsys
+ *     and you.
+ *
+ *     The Software IS NOT an item of Licensed Software or Licensed Product
+ *     under any End User Software License Agreement or Agreement for Licensed
+ *     Product with Synopsys or any supplement thereto.  Permission is hereby
+ *     granted, free of charge, to any person obtaining a copy of this software
+ *     annotated with this license and the Software, to deal in the Software
+ *     without restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or sell copies
+ *     of the Software, and to permit persons to whom the Software is furnished
+ *     to do so, subject to the following conditions:
+ *
+ *     The above copyright notice and this permission notice shall be included
+ *     in all copies or substantial portions of the Software.
+ *
+ *     THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
+ *     BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ *     TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ *     PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS
+ *     BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ *     CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ *     SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ *     INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ *     ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ *     THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/device.h>
+#include <linux/property.h>
+#include <linux/mdio.h>
+#include <linux/phy.h>
+
+#include "xgbe.h"
+#include "xgbe-common.h"
+
+#define XGBE_BLWC_PROPERTY		"amd,serdes-blwc"
+#define XGBE_CDR_RATE_PROPERTY		"amd,serdes-cdr-rate"
+#define XGBE_PQ_SKEW_PROPERTY		"amd,serdes-pq-skew"
+#define XGBE_TX_AMP_PROPERTY		"amd,serdes-tx-amp"
+#define XGBE_DFE_CFG_PROPERTY		"amd,serdes-dfe-tap-config"
+#define XGBE_DFE_ENA_PROPERTY		"amd,serdes-dfe-tap-enable"
+
+/* Default SerDes settings */
+#define XGBE_SPEED_1000_BLWC		1
+#define XGBE_SPEED_1000_CDR		0x2
+#define XGBE_SPEED_1000_PLL		0x0
+#define XGBE_SPEED_1000_PQ		0xa
+#define XGBE_SPEED_1000_RATE		0x3
+#define XGBE_SPEED_1000_TXAMP		0xf
+#define XGBE_SPEED_1000_WORD		0x1
+#define XGBE_SPEED_1000_DFE_TAP_CONFIG	0x3
+#define XGBE_SPEED_1000_DFE_TAP_ENABLE	0x0
+
+#define XGBE_SPEED_2500_BLWC		1
+#define XGBE_SPEED_2500_CDR		0x2
+#define XGBE_SPEED_2500_PLL		0x0
+#define XGBE_SPEED_2500_PQ		0xa
+#define XGBE_SPEED_2500_RATE		0x1
+#define XGBE_SPEED_2500_TXAMP		0xf
+#define XGBE_SPEED_2500_WORD		0x1
+#define XGBE_SPEED_2500_DFE_TAP_CONFIG	0x3
+#define XGBE_SPEED_2500_DFE_TAP_ENABLE	0x0
+
+#define XGBE_SPEED_10000_BLWC		0
+#define XGBE_SPEED_10000_CDR		0x7
+#define XGBE_SPEED_10000_PLL		0x1
+#define XGBE_SPEED_10000_PQ		0x12
+#define XGBE_SPEED_10000_RATE		0x0
+#define XGBE_SPEED_10000_TXAMP		0xa
+#define XGBE_SPEED_10000_WORD		0x7
+#define XGBE_SPEED_10000_DFE_TAP_CONFIG	0x1
+#define XGBE_SPEED_10000_DFE_TAP_ENABLE	0x7f
+
+/* Rate-change complete wait/retry count */
+#define XGBE_RATECHANGE_COUNT		500
+
+static const u32 xgbe_phy_blwc[] = {
+	XGBE_SPEED_1000_BLWC,
+	XGBE_SPEED_2500_BLWC,
+	XGBE_SPEED_10000_BLWC,
+};
+
+static const u32 xgbe_phy_cdr_rate[] = {
+	XGBE_SPEED_1000_CDR,
+	XGBE_SPEED_2500_CDR,
+	XGBE_SPEED_10000_CDR,
+};
+
+static const u32 xgbe_phy_pq_skew[] = {
+	XGBE_SPEED_1000_PQ,
+	XGBE_SPEED_2500_PQ,
+	XGBE_SPEED_10000_PQ,
+};
+
+static const u32 xgbe_phy_tx_amp[] = {
+	XGBE_SPEED_1000_TXAMP,
+	XGBE_SPEED_2500_TXAMP,
+	XGBE_SPEED_10000_TXAMP,
+};
+
+static const u32 xgbe_phy_dfe_tap_cfg[] = {
+	XGBE_SPEED_1000_DFE_TAP_CONFIG,
+	XGBE_SPEED_2500_DFE_TAP_CONFIG,
+	XGBE_SPEED_10000_DFE_TAP_CONFIG,
+};
+
+static const u32 xgbe_phy_dfe_tap_ena[] = {
+	XGBE_SPEED_1000_DFE_TAP_ENABLE,
+	XGBE_SPEED_2500_DFE_TAP_ENABLE,
+	XGBE_SPEED_10000_DFE_TAP_ENABLE,
+};
+
+struct xgbe_phy_data {
+	/* 1000/10000 vs 2500/10000 indicator */
+	unsigned int speed_set;
+
+	/* SerDes UEFI configurable settings.
+	 *   Switching between modes/speeds requires new values for some
+	 *   SerDes settings.  The values can be supplied as device
+	 *   properties in array format.  The first array entry is for
+	 *   1GbE, second for 2.5GbE and third for 10GbE
+	 */
+	u32 blwc[XGBE_SPEEDS];
+	u32 cdr_rate[XGBE_SPEEDS];
+	u32 pq_skew[XGBE_SPEEDS];
+	u32 tx_amp[XGBE_SPEEDS];
+	u32 dfe_tap_cfg[XGBE_SPEEDS];
+	u32 dfe_tap_ena[XGBE_SPEEDS];
+};
+
+static void xgbe_phy_kr_training_pre(struct xgbe_prv_data *pdata)
+{
+		XSIR0_IOWRITE_BITS(pdata, SIR0_KR_RT_1, RESET, 1);
+}
+
+static void xgbe_phy_kr_training_post(struct xgbe_prv_data *pdata)
+{
+		XSIR0_IOWRITE_BITS(pdata, SIR0_KR_RT_1, RESET, 0);
+}
+
+static enum xgbe_mode xgbe_phy_an_outcome(struct xgbe_prv_data *pdata)
+{
+	struct ethtool_link_ksettings *lks = &pdata->phy.lks;
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	enum xgbe_mode mode;
+	unsigned int ad_reg, lp_reg;
+
+	XGBE_SET_LP_ADV(lks, Autoneg);
+	XGBE_SET_LP_ADV(lks, Backplane);
+
+	/* Compare Advertisement and Link Partner register 1 */
+	ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE);
+	lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA);
+	if (lp_reg & 0x400)
+		XGBE_SET_LP_ADV(lks, Pause);
+	if (lp_reg & 0x800)
+		XGBE_SET_LP_ADV(lks, Asym_Pause);
+
+	if (pdata->phy.pause_autoneg) {
+		/* Set flow control based on auto-negotiation result */
+		pdata->phy.tx_pause = 0;
+		pdata->phy.rx_pause = 0;
+
+		if (ad_reg & lp_reg & 0x400) {
+			pdata->phy.tx_pause = 1;
+			pdata->phy.rx_pause = 1;
+		} else if (ad_reg & lp_reg & 0x800) {
+			if (ad_reg & 0x400)
+				pdata->phy.rx_pause = 1;
+			else if (lp_reg & 0x400)
+				pdata->phy.tx_pause = 1;
+		}
+	}
+
+	/* Compare Advertisement and Link Partner register 2 */
+	ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 1);
+	lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA + 1);
+	if (lp_reg & 0x80)
+		XGBE_SET_LP_ADV(lks, 10000baseKR_Full);
+	if (lp_reg & 0x20) {
+		if (phy_data->speed_set == XGBE_SPEEDSET_2500_10000)
+			XGBE_SET_LP_ADV(lks, 2500baseX_Full);
+		else
+			XGBE_SET_LP_ADV(lks, 1000baseKX_Full);
+	}
+
+	ad_reg &= lp_reg;
+	if (ad_reg & 0x80) {
+		mode = XGBE_MODE_KR;
+	} else if (ad_reg & 0x20) {
+		if (phy_data->speed_set == XGBE_SPEEDSET_2500_10000)
+			mode = XGBE_MODE_KX_2500;
+		else
+			mode = XGBE_MODE_KX_1000;
+	} else {
+		mode = XGBE_MODE_UNKNOWN;
+	}
+
+	/* Compare Advertisement and Link Partner register 3 */
+	ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 2);
+	lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA + 2);
+	if (lp_reg & 0xc000)
+		XGBE_SET_LP_ADV(lks, 10000baseR_FEC);
+
+	return mode;
+}
+
+static void xgbe_phy_an_advertising(struct xgbe_prv_data *pdata,
+				    struct ethtool_link_ksettings *dlks)
+{
+	struct ethtool_link_ksettings *slks = &pdata->phy.lks;
+
+	XGBE_LM_COPY(dlks, advertising, slks, advertising);
+}
+
+static int xgbe_phy_an_config(struct xgbe_prv_data *pdata)
+{
+	/* Nothing uniquely required for an configuration */
+	return 0;
+}
+
+static enum xgbe_an_mode xgbe_phy_an_mode(struct xgbe_prv_data *pdata)
+{
+	return XGBE_AN_MODE_CL73;
+}
+
+static void xgbe_phy_pcs_power_cycle(struct xgbe_prv_data *pdata)
+{
+	unsigned int reg;
+
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
+
+	reg |= MDIO_CTRL1_LPOWER;
+	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
+
+	usleep_range(75, 100);
+
+	reg &= ~MDIO_CTRL1_LPOWER;
+	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
+}
+
+static void xgbe_phy_start_ratechange(struct xgbe_prv_data *pdata)
+{
+	/* Assert Rx and Tx ratechange */
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, RATECHANGE, 1);
+}
+
+static void xgbe_phy_complete_ratechange(struct xgbe_prv_data *pdata)
+{
+	unsigned int wait;
+	u16 status;
+
+	/* Release Rx and Tx ratechange */
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, RATECHANGE, 0);
+
+	/* Wait for Rx and Tx ready */
+	wait = XGBE_RATECHANGE_COUNT;
+	while (wait--) {
+		usleep_range(50, 75);
+
+		status = XSIR0_IOREAD(pdata, SIR0_STATUS);
+		if (XSIR_GET_BITS(status, SIR0_STATUS, RX_READY) &&
+		    XSIR_GET_BITS(status, SIR0_STATUS, TX_READY))
+			goto rx_reset;
+	}
+
+	netif_dbg(pdata, link, pdata->netdev, "SerDes rx/tx not ready (%#hx)\n",
+		  status);
+
+rx_reset:
+	/* Perform Rx reset for the DFE changes */
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG6, RESETB_RXD, 0);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG6, RESETB_RXD, 1);
+}
+
+static void xgbe_phy_kr_mode(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	unsigned int reg;
+
+	/* Set PCS to KR/10G speed */
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
+	reg &= ~MDIO_PCS_CTRL2_TYPE;
+	reg |= MDIO_PCS_CTRL2_10GBR;
+	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL2, reg);
+
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
+	reg &= ~MDIO_CTRL1_SPEEDSEL;
+	reg |= MDIO_CTRL1_SPEED10G;
+	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
+
+	xgbe_phy_pcs_power_cycle(pdata);
+
+	/* Set SerDes to 10G speed */
+	xgbe_phy_start_ratechange(pdata);
+
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, DATARATE, XGBE_SPEED_10000_RATE);
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, WORDMODE, XGBE_SPEED_10000_WORD);
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, PLLSEL, XGBE_SPEED_10000_PLL);
+
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, CDR_RATE,
+			   phy_data->cdr_rate[XGBE_SPEED_10000]);
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, TXAMP,
+			   phy_data->tx_amp[XGBE_SPEED_10000]);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG20, BLWC_ENA,
+			   phy_data->blwc[XGBE_SPEED_10000]);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG114, PQ_REG,
+			   phy_data->pq_skew[XGBE_SPEED_10000]);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG129, RXDFE_CONFIG,
+			   phy_data->dfe_tap_cfg[XGBE_SPEED_10000]);
+	XRXTX_IOWRITE(pdata, RXTX_REG22,
+		      phy_data->dfe_tap_ena[XGBE_SPEED_10000]);
+
+	xgbe_phy_complete_ratechange(pdata);
+
+	netif_dbg(pdata, link, pdata->netdev, "10GbE KR mode set\n");
+}
+
+static void xgbe_phy_kx_2500_mode(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	unsigned int reg;
+
+	/* Set PCS to KX/1G speed */
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
+	reg &= ~MDIO_PCS_CTRL2_TYPE;
+	reg |= MDIO_PCS_CTRL2_10GBX;
+	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL2, reg);
+
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
+	reg &= ~MDIO_CTRL1_SPEEDSEL;
+	reg |= MDIO_CTRL1_SPEED1G;
+	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
+
+	xgbe_phy_pcs_power_cycle(pdata);
+
+	/* Set SerDes to 2.5G speed */
+	xgbe_phy_start_ratechange(pdata);
+
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, DATARATE, XGBE_SPEED_2500_RATE);
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, WORDMODE, XGBE_SPEED_2500_WORD);
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, PLLSEL, XGBE_SPEED_2500_PLL);
+
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, CDR_RATE,
+			   phy_data->cdr_rate[XGBE_SPEED_2500]);
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, TXAMP,
+			   phy_data->tx_amp[XGBE_SPEED_2500]);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG20, BLWC_ENA,
+			   phy_data->blwc[XGBE_SPEED_2500]);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG114, PQ_REG,
+			   phy_data->pq_skew[XGBE_SPEED_2500]);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG129, RXDFE_CONFIG,
+			   phy_data->dfe_tap_cfg[XGBE_SPEED_2500]);
+	XRXTX_IOWRITE(pdata, RXTX_REG22,
+		      phy_data->dfe_tap_ena[XGBE_SPEED_2500]);
+
+	xgbe_phy_complete_ratechange(pdata);
+
+	netif_dbg(pdata, link, pdata->netdev, "2.5GbE KX mode set\n");
+}
+
+static void xgbe_phy_kx_1000_mode(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	unsigned int reg;
+
+	/* Set PCS to KX/1G speed */
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
+	reg &= ~MDIO_PCS_CTRL2_TYPE;
+	reg |= MDIO_PCS_CTRL2_10GBX;
+	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL2, reg);
+
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
+	reg &= ~MDIO_CTRL1_SPEEDSEL;
+	reg |= MDIO_CTRL1_SPEED1G;
+	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
+
+	xgbe_phy_pcs_power_cycle(pdata);
+
+	/* Set SerDes to 1G speed */
+	xgbe_phy_start_ratechange(pdata);
+
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, DATARATE, XGBE_SPEED_1000_RATE);
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, WORDMODE, XGBE_SPEED_1000_WORD);
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, PLLSEL, XGBE_SPEED_1000_PLL);
+
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, CDR_RATE,
+			   phy_data->cdr_rate[XGBE_SPEED_1000]);
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, TXAMP,
+			   phy_data->tx_amp[XGBE_SPEED_1000]);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG20, BLWC_ENA,
+			   phy_data->blwc[XGBE_SPEED_1000]);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG114, PQ_REG,
+			   phy_data->pq_skew[XGBE_SPEED_1000]);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG129, RXDFE_CONFIG,
+			   phy_data->dfe_tap_cfg[XGBE_SPEED_1000]);
+	XRXTX_IOWRITE(pdata, RXTX_REG22,
+		      phy_data->dfe_tap_ena[XGBE_SPEED_1000]);
+
+	xgbe_phy_complete_ratechange(pdata);
+
+	netif_dbg(pdata, link, pdata->netdev, "1GbE KX mode set\n");
+}
+
+static enum xgbe_mode xgbe_phy_cur_mode(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	enum xgbe_mode mode;
+	unsigned int reg;
+
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
+	reg &= MDIO_PCS_CTRL2_TYPE;
+
+	if (reg == MDIO_PCS_CTRL2_10GBR) {
+		mode = XGBE_MODE_KR;
+	} else {
+		if (phy_data->speed_set == XGBE_SPEEDSET_2500_10000)
+			mode = XGBE_MODE_KX_2500;
+		else
+			mode = XGBE_MODE_KX_1000;
+	}
+
+	return mode;
+}
+
+static enum xgbe_mode xgbe_phy_switch_mode(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	enum xgbe_mode mode;
+
+	/* If we are in KR switch to KX, and vice-versa */
+	if (xgbe_phy_cur_mode(pdata) == XGBE_MODE_KR) {
+		if (phy_data->speed_set == XGBE_SPEEDSET_2500_10000)
+			mode = XGBE_MODE_KX_2500;
+		else
+			mode = XGBE_MODE_KX_1000;
+	} else {
+		mode = XGBE_MODE_KR;
+	}
+
+	return mode;
+}
+
+static enum xgbe_mode xgbe_phy_get_mode(struct xgbe_prv_data *pdata,
+					int speed)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	switch (speed) {
+	case SPEED_1000:
+		return (phy_data->speed_set == XGBE_SPEEDSET_1000_10000)
+			? XGBE_MODE_KX_1000 : XGBE_MODE_UNKNOWN;
+	case SPEED_2500:
+		return (phy_data->speed_set == XGBE_SPEEDSET_2500_10000)
+			? XGBE_MODE_KX_2500 : XGBE_MODE_UNKNOWN;
+	case SPEED_10000:
+		return XGBE_MODE_KR;
+	default:
+		return XGBE_MODE_UNKNOWN;
+	}
+}
+
+static void xgbe_phy_set_mode(struct xgbe_prv_data *pdata, enum xgbe_mode mode)
+{
+	switch (mode) {
+	case XGBE_MODE_KX_1000:
+		xgbe_phy_kx_1000_mode(pdata);
+		break;
+	case XGBE_MODE_KX_2500:
+		xgbe_phy_kx_2500_mode(pdata);
+		break;
+	case XGBE_MODE_KR:
+		xgbe_phy_kr_mode(pdata);
+		break;
+	default:
+		break;
+	}
+}
+
+static bool xgbe_phy_check_mode(struct xgbe_prv_data *pdata,
+				enum xgbe_mode mode, bool advert)
+{
+	if (pdata->phy.autoneg == AUTONEG_ENABLE) {
+		return advert;
+	} else {
+		enum xgbe_mode cur_mode;
+
+		cur_mode = xgbe_phy_get_mode(pdata, pdata->phy.speed);
+		if (cur_mode == mode)
+			return true;
+	}
+
+	return false;
+}
+
+static bool xgbe_phy_use_mode(struct xgbe_prv_data *pdata, enum xgbe_mode mode)
+{
+	struct ethtool_link_ksettings *lks = &pdata->phy.lks;
+
+	switch (mode) {
+	case XGBE_MODE_KX_1000:
+		return xgbe_phy_check_mode(pdata, mode,
+					   XGBE_ADV(lks, 1000baseKX_Full));
+	case XGBE_MODE_KX_2500:
+		return xgbe_phy_check_mode(pdata, mode,
+					   XGBE_ADV(lks, 2500baseX_Full));
+	case XGBE_MODE_KR:
+		return xgbe_phy_check_mode(pdata, mode,
+					   XGBE_ADV(lks, 10000baseKR_Full));
+	default:
+		return false;
+	}
+}
+
+static bool xgbe_phy_valid_speed(struct xgbe_prv_data *pdata, int speed)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	switch (speed) {
+	case SPEED_1000:
+		if (phy_data->speed_set != XGBE_SPEEDSET_1000_10000)
+			return false;
+		return true;
+	case SPEED_2500:
+		if (phy_data->speed_set != XGBE_SPEEDSET_2500_10000)
+			return false;
+		return true;
+	case SPEED_10000:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static int xgbe_phy_link_status(struct xgbe_prv_data *pdata, int *an_restart)
+{
+	unsigned int reg;
+
+	*an_restart = 0;
+
+	/* Link status is latched low, so read once to clear
+	 * and then read again to get current state
+	 */
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1);
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1);
+
+	return (reg & MDIO_STAT1_LSTATUS) ? 1 : 0;
+}
+
+static void xgbe_phy_stop(struct xgbe_prv_data *pdata)
+{
+	/* Nothing uniquely required for stop */
+}
+
+static int xgbe_phy_start(struct xgbe_prv_data *pdata)
+{
+	/* Nothing uniquely required for start */
+	return 0;
+}
+
+static int xgbe_phy_reset(struct xgbe_prv_data *pdata)
+{
+	unsigned int reg, count;
+
+	/* Perform a software reset of the PCS */
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
+	reg |= MDIO_CTRL1_RESET;
+	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
+
+	count = 50;
+	do {
+		msleep(20);
+		reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
+	} while ((reg & MDIO_CTRL1_RESET) && --count);
+
+	if (reg & MDIO_CTRL1_RESET)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static void xgbe_phy_exit(struct xgbe_prv_data *pdata)
+{
+	/* Nothing uniquely required for exit */
+}
+
+static int xgbe_phy_init(struct xgbe_prv_data *pdata)
+{
+	struct ethtool_link_ksettings *lks = &pdata->phy.lks;
+	struct xgbe_phy_data *phy_data;
+	int ret;
+
+	phy_data = devm_kzalloc(pdata->dev, sizeof(*phy_data), GFP_KERNEL);
+	if (!phy_data)
+		return -ENOMEM;
+
+	/* Retrieve the PHY speedset */
+	ret = device_property_read_u32(pdata->phy_dev, XGBE_SPEEDSET_PROPERTY,
+				       &phy_data->speed_set);
+	if (ret) {
+		dev_err(pdata->dev, "invalid %s property\n",
+			XGBE_SPEEDSET_PROPERTY);
+		return ret;
+	}
+
+	switch (phy_data->speed_set) {
+	case XGBE_SPEEDSET_1000_10000:
+	case XGBE_SPEEDSET_2500_10000:
+		break;
+	default:
+		dev_err(pdata->dev, "invalid %s property\n",
+			XGBE_SPEEDSET_PROPERTY);
+		return -EINVAL;
+	}
+
+	/* Retrieve the PHY configuration properties */
+	if (device_property_present(pdata->phy_dev, XGBE_BLWC_PROPERTY)) {
+		ret = device_property_read_u32_array(pdata->phy_dev,
+						     XGBE_BLWC_PROPERTY,
+						     phy_data->blwc,
+						     XGBE_SPEEDS);
+		if (ret) {
+			dev_err(pdata->dev, "invalid %s property\n",
+				XGBE_BLWC_PROPERTY);
+			return ret;
+		}
+	} else {
+		memcpy(phy_data->blwc, xgbe_phy_blwc,
+		       sizeof(phy_data->blwc));
+	}
+
+	if (device_property_present(pdata->phy_dev, XGBE_CDR_RATE_PROPERTY)) {
+		ret = device_property_read_u32_array(pdata->phy_dev,
+						     XGBE_CDR_RATE_PROPERTY,
+						     phy_data->cdr_rate,
+						     XGBE_SPEEDS);
+		if (ret) {
+			dev_err(pdata->dev, "invalid %s property\n",
+				XGBE_CDR_RATE_PROPERTY);
+			return ret;
+		}
+	} else {
+		memcpy(phy_data->cdr_rate, xgbe_phy_cdr_rate,
+		       sizeof(phy_data->cdr_rate));
+	}
+
+	if (device_property_present(pdata->phy_dev, XGBE_PQ_SKEW_PROPERTY)) {
+		ret = device_property_read_u32_array(pdata->phy_dev,
+						     XGBE_PQ_SKEW_PROPERTY,
+						     phy_data->pq_skew,
+						     XGBE_SPEEDS);
+		if (ret) {
+			dev_err(pdata->dev, "invalid %s property\n",
+				XGBE_PQ_SKEW_PROPERTY);
+			return ret;
+		}
+	} else {
+		memcpy(phy_data->pq_skew, xgbe_phy_pq_skew,
+		       sizeof(phy_data->pq_skew));
+	}
+
+	if (device_property_present(pdata->phy_dev, XGBE_TX_AMP_PROPERTY)) {
+		ret = device_property_read_u32_array(pdata->phy_dev,
+						     XGBE_TX_AMP_PROPERTY,
+						     phy_data->tx_amp,
+						     XGBE_SPEEDS);
+		if (ret) {
+			dev_err(pdata->dev, "invalid %s property\n",
+				XGBE_TX_AMP_PROPERTY);
+			return ret;
+		}
+	} else {
+		memcpy(phy_data->tx_amp, xgbe_phy_tx_amp,
+		       sizeof(phy_data->tx_amp));
+	}
+
+	if (device_property_present(pdata->phy_dev, XGBE_DFE_CFG_PROPERTY)) {
+		ret = device_property_read_u32_array(pdata->phy_dev,
+						     XGBE_DFE_CFG_PROPERTY,
+						     phy_data->dfe_tap_cfg,
+						     XGBE_SPEEDS);
+		if (ret) {
+			dev_err(pdata->dev, "invalid %s property\n",
+				XGBE_DFE_CFG_PROPERTY);
+			return ret;
+		}
+	} else {
+		memcpy(phy_data->dfe_tap_cfg, xgbe_phy_dfe_tap_cfg,
+		       sizeof(phy_data->dfe_tap_cfg));
+	}
+
+	if (device_property_present(pdata->phy_dev, XGBE_DFE_ENA_PROPERTY)) {
+		ret = device_property_read_u32_array(pdata->phy_dev,
+						     XGBE_DFE_ENA_PROPERTY,
+						     phy_data->dfe_tap_ena,
+						     XGBE_SPEEDS);
+		if (ret) {
+			dev_err(pdata->dev, "invalid %s property\n",
+				XGBE_DFE_ENA_PROPERTY);
+			return ret;
+		}
+	} else {
+		memcpy(phy_data->dfe_tap_ena, xgbe_phy_dfe_tap_ena,
+		       sizeof(phy_data->dfe_tap_ena));
+	}
+
+	/* Initialize supported features */
+	XGBE_ZERO_SUP(lks);
+	XGBE_SET_SUP(lks, Autoneg);
+	XGBE_SET_SUP(lks, Pause);
+	XGBE_SET_SUP(lks, Asym_Pause);
+	XGBE_SET_SUP(lks, Backplane);
+	XGBE_SET_SUP(lks, 10000baseKR_Full);
+	switch (phy_data->speed_set) {
+	case XGBE_SPEEDSET_1000_10000:
+		XGBE_SET_SUP(lks, 1000baseKX_Full);
+		break;
+	case XGBE_SPEEDSET_2500_10000:
+		XGBE_SET_SUP(lks, 2500baseX_Full);
+		break;
+	}
+
+	if (pdata->fec_ability & MDIO_PMA_10GBR_FECABLE_ABLE)
+		XGBE_SET_SUP(lks, 10000baseR_FEC);
+
+	pdata->phy_data = phy_data;
+
+	return 0;
+}
+
+void xgbe_init_function_ptrs_phy_v1(struct xgbe_phy_if *phy_if)
+{
+	struct xgbe_phy_impl_if *phy_impl = &phy_if->phy_impl;
+
+	phy_impl->init			= xgbe_phy_init;
+	phy_impl->exit			= xgbe_phy_exit;
+
+	phy_impl->reset			= xgbe_phy_reset;
+	phy_impl->start			= xgbe_phy_start;
+	phy_impl->stop			= xgbe_phy_stop;
+
+	phy_impl->link_status		= xgbe_phy_link_status;
+
+	phy_impl->valid_speed		= xgbe_phy_valid_speed;
+
+	phy_impl->use_mode		= xgbe_phy_use_mode;
+	phy_impl->set_mode		= xgbe_phy_set_mode;
+	phy_impl->get_mode		= xgbe_phy_get_mode;
+	phy_impl->switch_mode		= xgbe_phy_switch_mode;
+	phy_impl->cur_mode		= xgbe_phy_cur_mode;
+
+	phy_impl->an_mode		= xgbe_phy_an_mode;
+
+	phy_impl->an_config		= xgbe_phy_an_config;
+
+	phy_impl->an_advertising	= xgbe_phy_an_advertising;
+
+	phy_impl->an_outcome		= xgbe_phy_an_outcome;
+
+	phy_impl->kr_training_pre	= xgbe_phy_kr_training_pre;
+	phy_impl->kr_training_post	= xgbe_phy_kr_training_post;
+}