Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 472 insertions, 0 deletions

diff --git a/drivers/net/ethernet/cavium/liquidio/octeon_config.h b/drivers/net/ethernet/cavium/liquidio/octeon_config.h
new file mode 100644
index 000000000..24c212001
--- /dev/null
+++ b/drivers/net/ethernet/cavium/liquidio/octeon_config.h
@@ -0,0 +1,472 @@
+/**********************************************************************
+ * Author: Cavium, Inc.
+ *
+ * Contact: support@cavium.com
+ *          Please include "LiquidIO" in the subject.
+ *
+ * Copyright (c) 2003-2016 Cavium, Inc.
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more details.
+ ***********************************************************************/
+/*! \file  octeon_config.h
+ *  \brief Host Driver: Configuration data structures for the host driver.
+ */
+
+#ifndef __OCTEON_CONFIG_H__
+#define __OCTEON_CONFIG_H__
+
+/*--------------------------CONFIG VALUES------------------------*/
+
+/* The following macros affect the way the driver data structures
+ * are generated for Octeon devices.
+ * They can be modified.
+ */
+
+/* Maximum octeon devices defined as MAX_OCTEON_NICIF to support
+ * multiple(<= MAX_OCTEON_NICIF) Miniports
+ */
+#define   MAX_OCTEON_NICIF             128
+#define   MAX_OCTEON_DEVICES           MAX_OCTEON_NICIF
+#define   MAX_OCTEON_LINKS	       MAX_OCTEON_NICIF
+#define   MAX_OCTEON_MULTICAST_ADDR    32
+
+#define   MAX_OCTEON_FILL_COUNT        8
+
+/* CN6xxx IQ configuration macros */
+#define   CN6XXX_MAX_INPUT_QUEUES      32
+#define   CN6XXX_MAX_IQ_DESCRIPTORS    2048
+#define   CN6XXX_DB_MIN                1
+#define   CN6XXX_DB_MAX                8
+#define   CN6XXX_DB_TIMEOUT            1
+
+/* CN6xxx OQ configuration macros */
+#define   CN6XXX_MAX_OUTPUT_QUEUES     32
+#define   CN6XXX_MAX_OQ_DESCRIPTORS    2048
+#define   CN6XXX_OQ_BUF_SIZE           1664
+#define   CN6XXX_OQ_PKTSPER_INTR       ((CN6XXX_MAX_OQ_DESCRIPTORS < 512) ? \
+					(CN6XXX_MAX_OQ_DESCRIPTORS / 4) : 128)
+#define   CN6XXX_OQ_REFIL_THRESHOLD    ((CN6XXX_MAX_OQ_DESCRIPTORS < 512) ? \
+					(CN6XXX_MAX_OQ_DESCRIPTORS / 4) : 128)
+
+#define   CN6XXX_OQ_INTR_PKT           64
+#define   CN6XXX_OQ_INTR_TIME          100
+#define   DEFAULT_NUM_NIC_PORTS_66XX   2
+#define   DEFAULT_NUM_NIC_PORTS_68XX   4
+#define   DEFAULT_NUM_NIC_PORTS_68XX_210NV  2
+
+/* CN23xx  IQ configuration macros */
+#define   CN23XX_MAX_VFS_PER_PF_PASS_1_0 8
+#define   CN23XX_MAX_VFS_PER_PF_PASS_1_1 31
+#define   CN23XX_MAX_VFS_PER_PF          63
+#define   CN23XX_MAX_RINGS_PER_VF        8
+
+#define   CN23XX_MAX_RINGS_PER_PF_PASS_1_0 12
+#define   CN23XX_MAX_RINGS_PER_PF_PASS_1_1 32
+#define   CN23XX_MAX_RINGS_PER_PF          64
+#define   CN23XX_MAX_RINGS_PER_VF          8
+
+#define   CN23XX_MAX_INPUT_QUEUES	CN23XX_MAX_RINGS_PER_PF
+#define   CN23XX_MAX_IQ_DESCRIPTORS	2048
+#define   CN23XX_DEFAULT_IQ_DESCRIPTORS	512
+#define   CN23XX_MIN_IQ_DESCRIPTORS	128
+#define   CN23XX_DB_MIN                 1
+#define   CN23XX_DB_MAX                 8
+#define   CN23XX_DB_TIMEOUT             1
+
+#define   CN23XX_MAX_OUTPUT_QUEUES	CN23XX_MAX_RINGS_PER_PF
+#define   CN23XX_MAX_OQ_DESCRIPTORS	2048
+#define   CN23XX_DEFAULT_OQ_DESCRIPTORS	512
+#define   CN23XX_MIN_OQ_DESCRIPTORS	128
+#define   CN23XX_OQ_BUF_SIZE		1664
+#define   CN23XX_OQ_PKTSPER_INTR	128
+/*#define CAVIUM_ONLY_CN23XX_RX_PERF*/
+#define   CN23XX_OQ_REFIL_THRESHOLD	16
+
+#define   CN23XX_OQ_INTR_PKT		64
+#define   CN23XX_OQ_INTR_TIME		100
+#define   DEFAULT_NUM_NIC_PORTS_23XX	1
+
+#define   CN23XX_CFG_IO_QUEUES		CN23XX_MAX_RINGS_PER_PF
+/* PEMs count */
+#define   CN23XX_MAX_MACS		4
+
+#define   CN23XX_DEF_IQ_INTR_THRESHOLD	32
+#define   CN23XX_DEF_IQ_INTR_BYTE_THRESHOLD   (64 * 1024)
+/* common OCTEON configuration macros */
+#define   CN6XXX_CFG_IO_QUEUES         32
+#define   OCTEON_32BYTE_INSTR          32
+#define   OCTEON_64BYTE_INSTR          64
+#define   OCTEON_MAX_BASE_IOQ          4
+
+#define   OCTEON_DMA_INTR_PKT          64
+#define   OCTEON_DMA_INTR_TIME         1000
+
+#define MAX_TXQS_PER_INTF  8
+#define MAX_RXQS_PER_INTF  8
+#define DEF_TXQS_PER_INTF  4
+#define DEF_RXQS_PER_INTF  4
+
+#define INVALID_IOQ_NO          0xff
+
+#define   DEFAULT_POW_GRP       0
+
+/* Macros to get octeon config params */
+#define CFG_GET_IQ_CFG(cfg)                      ((cfg)->iq)
+#define CFG_GET_IQ_MAX_Q(cfg)                    ((cfg)->iq.max_iqs)
+#define CFG_GET_IQ_PENDING_LIST_SIZE(cfg)        ((cfg)->iq.pending_list_size)
+#define CFG_GET_IQ_INSTR_TYPE(cfg)               ((cfg)->iq.instr_type)
+#define CFG_GET_IQ_DB_MIN(cfg)                   ((cfg)->iq.db_min)
+#define CFG_GET_IQ_DB_TIMEOUT(cfg)               ((cfg)->iq.db_timeout)
+
+#define CFG_GET_IQ_INTR_PKT(cfg)                 ((cfg)->iq.iq_intr_pkt)
+#define CFG_SET_IQ_INTR_PKT(cfg, val)            (cfg)->iq.iq_intr_pkt = val
+
+#define CFG_GET_OQ_MAX_Q(cfg)                    ((cfg)->oq.max_oqs)
+#define CFG_GET_OQ_PKTS_PER_INTR(cfg)            ((cfg)->oq.pkts_per_intr)
+#define CFG_GET_OQ_REFILL_THRESHOLD(cfg)         ((cfg)->oq.refill_threshold)
+#define CFG_GET_OQ_INTR_PKT(cfg)                 ((cfg)->oq.oq_intr_pkt)
+#define CFG_GET_OQ_INTR_TIME(cfg)                ((cfg)->oq.oq_intr_time)
+#define CFG_SET_OQ_INTR_PKT(cfg, val)            (cfg)->oq.oq_intr_pkt = val
+#define CFG_SET_OQ_INTR_TIME(cfg, val)           (cfg)->oq.oq_intr_time = val
+
+#define CFG_GET_DMA_INTR_PKT(cfg)                ((cfg)->dma.dma_intr_pkt)
+#define CFG_GET_DMA_INTR_TIME(cfg)               ((cfg)->dma.dma_intr_time)
+#define CFG_GET_NUM_NIC_PORTS(cfg)               ((cfg)->num_nic_ports)
+#define CFG_GET_NUM_DEF_TX_DESCS(cfg)            ((cfg)->num_def_tx_descs)
+#define CFG_GET_NUM_DEF_RX_DESCS(cfg)            ((cfg)->num_def_rx_descs)
+#define CFG_GET_DEF_RX_BUF_SIZE(cfg)             ((cfg)->def_rx_buf_size)
+
+#define CFG_GET_MAX_TXQS_NIC_IF(cfg, idx) \
+				((cfg)->nic_if_cfg[idx].max_txqs)
+#define CFG_GET_NUM_TXQS_NIC_IF(cfg, idx) \
+				((cfg)->nic_if_cfg[idx].num_txqs)
+#define CFG_GET_MAX_RXQS_NIC_IF(cfg, idx) \
+				((cfg)->nic_if_cfg[idx].max_rxqs)
+#define CFG_GET_NUM_RXQS_NIC_IF(cfg, idx) \
+				((cfg)->nic_if_cfg[idx].num_rxqs)
+#define CFG_GET_NUM_RX_DESCS_NIC_IF(cfg, idx) \
+				((cfg)->nic_if_cfg[idx].num_rx_descs)
+#define CFG_GET_NUM_TX_DESCS_NIC_IF(cfg, idx) \
+				((cfg)->nic_if_cfg[idx].num_tx_descs)
+#define CFG_GET_NUM_RX_BUF_SIZE_NIC_IF(cfg, idx) \
+				((cfg)->nic_if_cfg[idx].rx_buf_size)
+#define CFG_GET_BASE_QUE_NIC_IF(cfg, idx) \
+				((cfg)->nic_if_cfg[idx].base_queue)
+#define CFG_GET_GMXID_NIC_IF(cfg, idx) \
+				((cfg)->nic_if_cfg[idx].gmx_port_id)
+
+#define CFG_GET_CTRL_Q_GRP(cfg)                  ((cfg)->misc.ctrlq_grp)
+#define CFG_GET_HOST_LINK_QUERY_INTERVAL(cfg) \
+				((cfg)->misc.host_link_query_interval)
+#define CFG_GET_OCT_LINK_QUERY_INTERVAL(cfg) \
+				((cfg)->misc.oct_link_query_interval)
+#define CFG_GET_IS_SLI_BP_ON(cfg)                ((cfg)->misc.enable_sli_oq_bp)
+
+#define CFG_SET_NUM_RX_DESCS_NIC_IF(cfg, idx, value) \
+				((cfg)->nic_if_cfg[idx].num_rx_descs = value)
+#define CFG_SET_NUM_TX_DESCS_NIC_IF(cfg, idx, value) \
+				((cfg)->nic_if_cfg[idx].num_tx_descs = value)
+
+/* Max IOQs per OCTEON Link */
+#define MAX_IOQS_PER_NICIF              64
+
+enum lio_card_type {
+	LIO_210SV = 0, /* Two port, 66xx */
+	LIO_210NV,     /* Two port, 68xx */
+	LIO_410NV,     /* Four port, 68xx */
+	LIO_23XX       /* 23xx */
+};
+
+#define LIO_210SV_NAME "210sv"
+#define LIO_210NV_NAME "210nv"
+#define LIO_410NV_NAME "410nv"
+#define LIO_23XX_NAME  "23xx"
+
+/** Structure to define the configuration attributes for each Input queue.
+ *  Applicable to all Octeon processors
+ **/
+struct octeon_iq_config {
+#ifdef __BIG_ENDIAN_BITFIELD
+	u64 reserved:16;
+
+	/** Tx interrupt packets. Applicable to 23xx only */
+	u64 iq_intr_pkt:16;
+
+	/** Minimum ticks to wait before checking for pending instructions. */
+	u64 db_timeout:16;
+
+	/** Minimum number of commands pending to be posted to Octeon
+	 *  before driver hits the Input queue doorbell.
+	 */
+	u64 db_min:8;
+
+	/** Command size - 32 or 64 bytes */
+	u64 instr_type:32;
+
+	/** Pending list size (usually set to the sum of the size of all Input
+	 *  queues)
+	 */
+	u64 pending_list_size:32;
+
+	/* Max number of IQs available */
+	u64 max_iqs:8;
+#else
+	/* Max number of IQs available */
+	u64 max_iqs:8;
+
+	/** Pending list size (usually set to the sum of the size of all Input
+	 *  queues)
+	 */
+	u64 pending_list_size:32;
+
+	/** Command size - 32 or 64 bytes */
+	u64 instr_type:32;
+
+	/** Minimum number of commands pending to be posted to Octeon
+	 *  before driver hits the Input queue doorbell.
+	 */
+	u64 db_min:8;
+
+	/** Minimum ticks to wait before checking for pending instructions. */
+	u64 db_timeout:16;
+
+	/** Tx interrupt packets. Applicable to 23xx only */
+	u64 iq_intr_pkt:16;
+
+	u64 reserved:16;
+#endif
+};
+
+/** Structure to define the configuration attributes for each Output queue.
+ *  Applicable to all Octeon processors
+ **/
+struct octeon_oq_config {
+#ifdef __BIG_ENDIAN_BITFIELD
+	u64 reserved:16;
+
+	u64 pkts_per_intr:16;
+
+	/** Interrupt Coalescing (Time Interval). Octeon will interrupt the
+	 *  host if atleast one packet was sent in the time interval specified
+	 *  by this field. The driver uses time interval interrupt coalescing
+	 *  by default. The time is specified in microseconds.
+	 */
+	u64 oq_intr_time:16;
+
+	/** Interrupt Coalescing (Packet Count). Octeon will interrupt the host
+	 *  only if it sent as many packets as specified by this field.
+	 *  The driver
+	 *  usually does not use packet count interrupt coalescing.
+	 */
+	u64 oq_intr_pkt:16;
+
+	/** The number of buffers that were consumed during packet processing by
+	 *   the driver on this Output queue before the driver attempts to
+	 *   replenish
+	 *   the descriptor ring with new buffers.
+	 */
+	u64 refill_threshold:16;
+
+	/* Max number of OQs available */
+	u64 max_oqs:8;
+
+#else
+	/* Max number of OQs available */
+	u64 max_oqs:8;
+
+	/** The number of buffers that were consumed during packet processing by
+	 *   the driver on this Output queue before the driver attempts to
+	 *   replenish
+	 *   the descriptor ring with new buffers.
+	 */
+	u64 refill_threshold:16;
+
+	/** Interrupt Coalescing (Packet Count). Octeon will interrupt the host
+	 *  only if it sent as many packets as specified by this field.
+	 *  The driver
+	 *  usually does not use packet count interrupt coalescing.
+	 */
+	u64 oq_intr_pkt:16;
+
+	/** Interrupt Coalescing (Time Interval). Octeon will interrupt the
+	 *  host if atleast one packet was sent in the time interval specified
+	 *  by this field. The driver uses time interval interrupt coalescing
+	 *  by default.  The time is specified in microseconds.
+	 */
+	u64 oq_intr_time:16;
+
+	u64 pkts_per_intr:16;
+
+	u64 reserved:16;
+#endif
+
+};
+
+/** This structure conatins the NIC link configuration attributes,
+ *  common for all the OCTEON Modles.
+ */
+struct octeon_nic_if_config {
+#ifdef __BIG_ENDIAN_BITFIELD
+	u64 reserved:56;
+
+	u64 base_queue:16;
+
+	u64 gmx_port_id:8;
+
+	/* SKB size, We need not change buf size even for Jumbo frames.
+	 * Octeon can send jumbo frames in 4 consecutive descriptors,
+	 */
+	u64 rx_buf_size:16;
+
+	/* Num of desc for tx rings */
+	u64 num_tx_descs:16;
+
+	/* Num of desc for rx rings */
+	u64 num_rx_descs:16;
+
+	/* Actual configured value. Range could be: 1...max_rxqs */
+	u64 num_rxqs:16;
+
+	/* Max Rxqs: Half for each of the two ports :max_oq/2  */
+	u64 max_rxqs:16;
+
+	/* Actual configured value. Range could be: 1...max_txqs */
+	u64 num_txqs:16;
+
+	/* Max Txqs: Half for each of the two ports :max_iq/2 */
+	u64 max_txqs:16;
+#else
+	/* Max Txqs: Half for each of the two ports :max_iq/2 */
+	u64 max_txqs:16;
+
+	/* Actual configured value. Range could be: 1...max_txqs */
+	u64 num_txqs:16;
+
+	/* Max Rxqs: Half for each of the two ports :max_oq/2  */
+	u64 max_rxqs:16;
+
+	/* Actual configured value. Range could be: 1...max_rxqs */
+	u64 num_rxqs:16;
+
+	/* Num of desc for rx rings */
+	u64 num_rx_descs:16;
+
+	/* Num of desc for tx rings */
+	u64 num_tx_descs:16;
+
+	/* SKB size, We need not change buf size even for Jumbo frames.
+	 * Octeon can send jumbo frames in 4 consecutive descriptors,
+	 */
+	u64 rx_buf_size:16;
+
+	u64 gmx_port_id:8;
+
+	u64 base_queue:16;
+
+	u64 reserved:56;
+#endif
+
+};
+
+/** Structure to define the configuration attributes for meta data.
+ *  Applicable to all Octeon processors.
+ */
+
+struct octeon_misc_config {
+#ifdef __BIG_ENDIAN_BITFIELD
+	/** Host link status polling period */
+	u64 host_link_query_interval:32;
+	/** Oct link status polling period */
+	u64 oct_link_query_interval:32;
+
+	u64 enable_sli_oq_bp:1;
+	/** Control IQ Group */
+	u64 ctrlq_grp:4;
+#else
+	/** Control IQ Group */
+	u64 ctrlq_grp:4;
+	/** BP for SLI OQ */
+	u64 enable_sli_oq_bp:1;
+	/** Host link status polling period */
+	u64 oct_link_query_interval:32;
+	/** Oct link status polling period */
+	u64 host_link_query_interval:32;
+#endif
+};
+
+/** Structure to define the configuration for all OCTEON processors. */
+struct octeon_config {
+	u16 card_type;
+	char *card_name;
+
+	/** Input Queue attributes. */
+	struct octeon_iq_config iq;
+
+	/** Output Queue attributes. */
+	struct octeon_oq_config oq;
+
+	/** NIC Port Configuration */
+	struct octeon_nic_if_config nic_if_cfg[MAX_OCTEON_NICIF];
+
+	/** Miscellaneous attributes */
+	struct octeon_misc_config misc;
+
+	int num_nic_ports;
+
+	int num_def_tx_descs;
+
+	/* Num of desc for rx rings */
+	int num_def_rx_descs;
+
+	int def_rx_buf_size;
+
+};
+
+/* The following config values are fixed and should not be modified. */
+
+#define  BAR1_INDEX_DYNAMIC_MAP          2
+#define  BAR1_INDEX_STATIC_MAP          15
+#define  OCTEON_BAR1_ENTRY_SIZE         (4 * 1024 * 1024)
+
+#define  MAX_BAR1_IOREMAP_SIZE  (16 * OCTEON_BAR1_ENTRY_SIZE)
+
+/* Response lists - 1 ordered, 1 unordered-blocking, 1 unordered-nonblocking
+ *                  1 process done list, 1 zombie lists(timeouted sc list)
+ * NoResponse Lists are now maintained with each IQ. (Dec' 2007).
+ */
+#define MAX_RESPONSE_LISTS           6
+
+/* Opcode hash bits. The opcode is hashed on the lower 6-bits to lookup the
+ * dispatch table.
+ */
+#define OPCODE_MASK_BITS             6
+
+/* Mask for the 6-bit lookup hash */
+#define OCTEON_OPCODE_MASK           0x3f
+
+/* Size of the dispatch table. The 6-bit hash can index into 2^6 entries */
+#define DISPATCH_LIST_SIZE                      BIT(OPCODE_MASK_BITS)
+
+/* Maximum number of Octeon Instruction (command) queues */
+#define MAX_OCTEON_INSTR_QUEUES(oct)		\
+		(OCTEON_CN23XX_PF(oct) ? CN23XX_MAX_INPUT_QUEUES : \
+					CN6XXX_MAX_INPUT_QUEUES)
+
+/* Maximum number of Octeon Instruction (command) queues */
+#define MAX_OCTEON_OUTPUT_QUEUES(oct)		\
+		(OCTEON_CN23XX_PF(oct) ? CN23XX_MAX_OUTPUT_QUEUES : \
+					CN6XXX_MAX_OUTPUT_QUEUES)
+
+#define MAX_POSSIBLE_OCTEON_INSTR_QUEUES	CN23XX_MAX_INPUT_QUEUES
+#define MAX_POSSIBLE_OCTEON_OUTPUT_QUEUES	CN23XX_MAX_OUTPUT_QUEUES
+
+#define MAX_POSSIBLE_VFS			64
+
+#endif /* __OCTEON_CONFIG_H__  */