Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 463 insertions, 0 deletions

diff --git a/drivers/net/ethernet/ibm/emac/core.h b/drivers/net/ethernet/ibm/emac/core.h
new file mode 100644
index 000000000..89a1b0fea
--- /dev/null
+++ b/drivers/net/ethernet/ibm/emac/core.h
@@ -0,0 +1,463 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * drivers/net/ethernet/ibm/emac/core.h
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller.
+ *
+ * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
+ *                <benh@kernel.crashing.org>
+ *
+ * Based on the arch/ppc version of the driver:
+ *
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
+ * Based on original work by
+ *      Armin Kuster <akuster@mvista.com>
+ * 	Johnnie Peters <jpeters@mvista.com>
+ *      Copyright 2000, 2001 MontaVista Softare Inc.
+ */
+#ifndef __IBM_NEWEMAC_CORE_H
+#define __IBM_NEWEMAC_CORE_H
+
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/dma-mapping.h>
+#include <linux/spinlock.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+
+#include <asm/io.h>
+#include <asm/dcr.h>
+
+#include "emac.h"
+#include "phy.h"
+#include "zmii.h"
+#include "rgmii.h"
+#include "mal.h"
+#include "tah.h"
+#include "debug.h"
+
+#define NUM_TX_BUFF			CONFIG_IBM_EMAC_TXB
+#define NUM_RX_BUFF			CONFIG_IBM_EMAC_RXB
+
+/* Simple sanity check */
+#if NUM_TX_BUFF > 256 || NUM_RX_BUFF > 256
+#error Invalid number of buffer descriptors (greater than 256)
+#endif
+
+#define EMAC_MIN_MTU			46
+
+/* Maximum L2 header length (VLAN tagged, no FCS) */
+#define EMAC_MTU_OVERHEAD		(6 * 2 + 2 + 4)
+
+/* RX BD size for the given MTU */
+static inline int emac_rx_size(int mtu)
+{
+	if (mtu > ETH_DATA_LEN)
+		return MAL_MAX_RX_SIZE;
+	else
+		return mal_rx_size(ETH_DATA_LEN + EMAC_MTU_OVERHEAD);
+}
+
+/* Size of RX skb for the given MTU */
+static inline int emac_rx_skb_size(int mtu)
+{
+	int size = max(mtu + EMAC_MTU_OVERHEAD, emac_rx_size(mtu));
+
+	return SKB_DATA_ALIGN(size + NET_IP_ALIGN) + NET_SKB_PAD;
+}
+
+/* RX DMA sync size */
+static inline int emac_rx_sync_size(int mtu)
+{
+	return SKB_DATA_ALIGN(emac_rx_size(mtu) + NET_IP_ALIGN);
+}
+
+/* Driver statistcs is split into two parts to make it more cache friendly:
+ *   - normal statistics (packet count, etc)
+ *   - error statistics
+ *
+ * When statistics is requested by ethtool, these parts are concatenated,
+ * normal one goes first.
+ *
+ * Please, keep these structures in sync with emac_stats_keys.
+ */
+
+/* Normal TX/RX Statistics */
+struct emac_stats {
+	u64 rx_packets;
+	u64 rx_bytes;
+	u64 tx_packets;
+	u64 tx_bytes;
+	u64 rx_packets_csum;
+	u64 tx_packets_csum;
+};
+
+/* Error statistics */
+struct emac_error_stats {
+	u64 tx_undo;
+
+	/* Software RX Errors */
+	u64 rx_dropped_stack;
+	u64 rx_dropped_oom;
+	u64 rx_dropped_error;
+	u64 rx_dropped_resize;
+	u64 rx_dropped_mtu;
+	u64 rx_stopped;
+	/* BD reported RX errors */
+	u64 rx_bd_errors;
+	u64 rx_bd_overrun;
+	u64 rx_bd_bad_packet;
+	u64 rx_bd_runt_packet;
+	u64 rx_bd_short_event;
+	u64 rx_bd_alignment_error;
+	u64 rx_bd_bad_fcs;
+	u64 rx_bd_packet_too_long;
+	u64 rx_bd_out_of_range;
+	u64 rx_bd_in_range;
+	/* EMAC IRQ reported RX errors */
+	u64 rx_parity;
+	u64 rx_fifo_overrun;
+	u64 rx_overrun;
+	u64 rx_bad_packet;
+	u64 rx_runt_packet;
+	u64 rx_short_event;
+	u64 rx_alignment_error;
+	u64 rx_bad_fcs;
+	u64 rx_packet_too_long;
+	u64 rx_out_of_range;
+	u64 rx_in_range;
+
+	/* Software TX Errors */
+	u64 tx_dropped;
+	/* BD reported TX errors */
+	u64 tx_bd_errors;
+	u64 tx_bd_bad_fcs;
+	u64 tx_bd_carrier_loss;
+	u64 tx_bd_excessive_deferral;
+	u64 tx_bd_excessive_collisions;
+	u64 tx_bd_late_collision;
+	u64 tx_bd_multple_collisions;
+	u64 tx_bd_single_collision;
+	u64 tx_bd_underrun;
+	u64 tx_bd_sqe;
+	/* EMAC IRQ reported TX errors */
+	u64 tx_parity;
+	u64 tx_underrun;
+	u64 tx_sqe;
+	u64 tx_errors;
+};
+
+#define EMAC_ETHTOOL_STATS_COUNT	((sizeof(struct emac_stats) + \
+					  sizeof(struct emac_error_stats)) \
+					 / sizeof(u64))
+
+struct emac_instance {
+	struct net_device		*ndev;
+	struct emac_regs		__iomem *emacp;
+	struct platform_device		*ofdev;
+	struct device_node		**blist; /* bootlist entry */
+
+	/* MAL linkage */
+	u32				mal_ph;
+	struct platform_device		*mal_dev;
+	u32				mal_rx_chan;
+	u32				mal_tx_chan;
+	struct mal_instance		*mal;
+	struct mal_commac		commac;
+
+	/* PHY infos */
+	phy_interface_t			phy_mode;
+	u32				phy_map;
+	u32				phy_address;
+	u32				phy_feat_exc;
+	struct mii_phy			phy;
+	struct mutex			link_lock;
+	struct delayed_work		link_work;
+	int				link_polling;
+
+	/* GPCS PHY infos */
+	u32				gpcs_address;
+
+	/* Shared MDIO if any */
+	u32				mdio_ph;
+	struct platform_device		*mdio_dev;
+	struct emac_instance		*mdio_instance;
+	struct mutex			mdio_lock;
+
+	/* Device-tree based phy configuration */
+	struct mii_bus			*mii_bus;
+	struct phy_device		*phy_dev;
+
+	/* ZMII infos if any */
+	u32				zmii_ph;
+	u32				zmii_port;
+	struct platform_device		*zmii_dev;
+
+	/* RGMII infos if any */
+	u32				rgmii_ph;
+	u32				rgmii_port;
+	struct platform_device		*rgmii_dev;
+
+	/* TAH infos if any */
+	u32				tah_ph;
+	u32				tah_port;
+	struct platform_device		*tah_dev;
+
+	/* IRQs */
+	int				wol_irq;
+	int				emac_irq;
+
+	/* OPB bus frequency in Mhz */
+	u32				opb_bus_freq;
+
+	/* Cell index within an ASIC (for clk mgmnt) */
+	u32				cell_index;
+
+	/* Max supported MTU */
+	u32				max_mtu;
+
+	/* Feature bits (from probe table) */
+	unsigned int			features;
+
+	/* Tx and Rx fifo sizes & other infos in bytes */
+	u32				tx_fifo_size;
+	u32				tx_fifo_size_gige;
+	u32				rx_fifo_size;
+	u32				rx_fifo_size_gige;
+	u32				fifo_entry_size;
+	u32				mal_burst_size; /* move to MAL ? */
+
+	/* IAHT and GAHT filter parameterization */
+	u32				xaht_slots_shift;
+	u32				xaht_width_shift;
+
+	/* Descriptor management
+	 */
+	struct mal_descriptor		*tx_desc;
+	int				tx_cnt;
+	int				tx_slot;
+	int				ack_slot;
+
+	struct mal_descriptor		*rx_desc;
+	int				rx_slot;
+	struct sk_buff			*rx_sg_skb;	/* 1 */
+	int 				rx_skb_size;
+	int				rx_sync_size;
+
+	struct sk_buff			*tx_skb[NUM_TX_BUFF];
+	struct sk_buff			*rx_skb[NUM_RX_BUFF];
+
+	/* Stats
+	 */
+	struct emac_error_stats		estats;
+	struct emac_stats 		stats;
+
+	/* Misc
+	 */
+	int				reset_failed;
+	int				stop_timeout;	/* in us */
+	int				no_mcast;
+	int				mcast_pending;
+	int				opened;
+	struct work_struct		reset_work;
+	spinlock_t			lock;
+};
+
+/*
+ * Features of various EMAC implementations
+ */
+
+/*
+ * No flow control on 40x according to the original driver
+ */
+#define EMAC_FTR_NO_FLOW_CONTROL_40x	0x00000001
+/*
+ * Cell is an EMAC4
+ */
+#define EMAC_FTR_EMAC4			0x00000002
+/*
+ * For the 440SPe, AMCC inexplicably changed the polarity of
+ * the "operation complete" bit in the MII control register.
+ */
+#define EMAC_FTR_STACR_OC_INVERT	0x00000004
+/*
+ * Set if we have a TAH.
+ */
+#define EMAC_FTR_HAS_TAH		0x00000008
+/*
+ * Set if we have a ZMII.
+ */
+#define EMAC_FTR_HAS_ZMII		0x00000010
+/*
+ * Set if we have a RGMII.
+ */
+#define EMAC_FTR_HAS_RGMII		0x00000020
+/*
+ * Set if we have new type STACR with STAOPC
+ */
+#define EMAC_FTR_HAS_NEW_STACR		0x00000040
+/*
+ * Set if we need phy clock workaround for 440gx
+ */
+#define EMAC_FTR_440GX_PHY_CLK_FIX	0x00000080
+/*
+ * Set if we need phy clock workaround for 440ep or 440gr
+ */
+#define EMAC_FTR_440EP_PHY_CLK_FIX	0x00000100
+/*
+ * The 405EX and 460EX contain the EMAC4SYNC core
+ */
+#define EMAC_FTR_EMAC4SYNC		0x00000200
+/*
+ * Set if we need phy clock workaround for 460ex or 460gt
+ */
+#define EMAC_FTR_460EX_PHY_CLK_FIX	0x00000400
+/*
+ * APM821xx requires Jumbo frame size set explicitly
+ */
+#define EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE	0x00000800
+/*
+ * APM821xx does not support Half Duplex mode
+ */
+#define EMAC_FTR_APM821XX_NO_HALF_DUPLEX	0x00001000
+
+/* Right now, we don't quite handle the always/possible masks on the
+ * most optimal way as we don't have a way to say something like
+ * always EMAC4. Patches welcome.
+ */
+enum {
+	EMAC_FTRS_ALWAYS	= 0,
+
+	EMAC_FTRS_POSSIBLE	=
+#ifdef CONFIG_IBM_EMAC_EMAC4
+	    EMAC_FTR_EMAC4	| EMAC_FTR_EMAC4SYNC	|
+	    EMAC_FTR_HAS_NEW_STACR	|
+	    EMAC_FTR_STACR_OC_INVERT | EMAC_FTR_440GX_PHY_CLK_FIX |
+#endif
+#ifdef CONFIG_IBM_EMAC_TAH
+	    EMAC_FTR_HAS_TAH	|
+#endif
+#ifdef CONFIG_IBM_EMAC_ZMII
+	    EMAC_FTR_HAS_ZMII	|
+#endif
+#ifdef CONFIG_IBM_EMAC_RGMII
+	    EMAC_FTR_HAS_RGMII	|
+#endif
+#ifdef CONFIG_IBM_EMAC_NO_FLOW_CTRL
+	    EMAC_FTR_NO_FLOW_CONTROL_40x |
+#endif
+	EMAC_FTR_460EX_PHY_CLK_FIX |
+	EMAC_FTR_440EP_PHY_CLK_FIX |
+	EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE |
+	EMAC_FTR_APM821XX_NO_HALF_DUPLEX,
+};
+
+static inline int emac_has_feature(struct emac_instance *dev,
+				   unsigned long feature)
+{
+	return (EMAC_FTRS_ALWAYS & feature) ||
+	       (EMAC_FTRS_POSSIBLE & dev->features & feature);
+}
+
+/*
+ * Various instances of the EMAC core have varying 1) number of
+ * address match slots, 2) width of the registers for handling address
+ * match slots, 3) number of registers for handling address match
+ * slots and 4) base offset for those registers.
+ *
+ * These macros and inlines handle these differences based on
+ * parameters supplied by the device structure which are, in turn,
+ * initialized based on the "compatible" entry in the device tree.
+ */
+
+#define	EMAC4_XAHT_SLOTS_SHIFT		6
+#define	EMAC4_XAHT_WIDTH_SHIFT		4
+
+#define	EMAC4SYNC_XAHT_SLOTS_SHIFT	8
+#define	EMAC4SYNC_XAHT_WIDTH_SHIFT	5
+
+/* The largest span between slots and widths above is 3 */
+#define	EMAC_XAHT_MAX_REGS		(1 << 3)
+
+#define	EMAC_XAHT_SLOTS(dev)         	(1 << (dev)->xaht_slots_shift)
+#define	EMAC_XAHT_WIDTH(dev)         	(1 << (dev)->xaht_width_shift)
+#define	EMAC_XAHT_REGS(dev)          	(1 << ((dev)->xaht_slots_shift - \
+					       (dev)->xaht_width_shift))
+
+#define	EMAC_XAHT_CRC_TO_SLOT(dev, crc)			\
+	((EMAC_XAHT_SLOTS(dev) - 1) -			\
+	 ((crc) >> ((sizeof (u32) * BITS_PER_BYTE) -	\
+		    (dev)->xaht_slots_shift)))
+
+#define	EMAC_XAHT_SLOT_TO_REG(dev, slot)		\
+	((slot) >> (dev)->xaht_width_shift)
+
+#define	EMAC_XAHT_SLOT_TO_MASK(dev, slot)		\
+	((u32)(1 << (EMAC_XAHT_WIDTH(dev) - 1)) >>	\
+	 ((slot) & (u32)(EMAC_XAHT_WIDTH(dev) - 1)))
+
+static inline u32 *emac_xaht_base(struct emac_instance *dev)
+{
+	struct emac_regs __iomem *p = dev->emacp;
+	int offset;
+
+	/* The first IAHT entry always is the base of the block of
+	 * IAHT and GAHT registers.
+	 */
+	if (emac_has_feature(dev, EMAC_FTR_EMAC4SYNC))
+		offset = offsetof(struct emac_regs, u1.emac4sync.iaht1);
+	else
+		offset = offsetof(struct emac_regs, u0.emac4.iaht1);
+
+	return (u32 *)((ptrdiff_t)p + offset);
+}
+
+static inline u32 *emac_gaht_base(struct emac_instance *dev)
+{
+	/* GAHT registers always come after an identical number of
+	 * IAHT registers.
+	 */
+	return emac_xaht_base(dev) + EMAC_XAHT_REGS(dev);
+}
+
+static inline u32 *emac_iaht_base(struct emac_instance *dev)
+{
+	/* IAHT registers always come before an identical number of
+	 * GAHT registers.
+	 */
+	return emac_xaht_base(dev);
+}
+
+/* Ethtool get_regs complex data.
+ * We want to get not just EMAC registers, but also MAL, ZMII, RGMII, TAH
+ * when available.
+ *
+ * Returned BLOB consists of the ibm_emac_ethtool_regs_hdr,
+ * MAL registers, EMAC registers and optional ZMII, RGMII, TAH registers.
+ * Each register component is preceded with emac_ethtool_regs_subhdr.
+ * Order of the optional headers follows their relative bit posititions
+ * in emac_ethtool_regs_hdr.components
+ */
+#define EMAC_ETHTOOL_REGS_ZMII		0x00000001
+#define EMAC_ETHTOOL_REGS_RGMII		0x00000002
+#define EMAC_ETHTOOL_REGS_TAH		0x00000004
+
+struct emac_ethtool_regs_hdr {
+	u32 components;
+};
+
+struct emac_ethtool_regs_subhdr {
+	u32 version;
+	u32 index;
+};
+
+#define EMAC_ETHTOOL_REGS_VER		3
+#define EMAC4_ETHTOOL_REGS_VER		4
+#define EMAC4SYNC_ETHTOOL_REGS_VER	5
+
+#endif /* __IBM_NEWEMAC_CORE_H */