Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 309 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h
new file mode 100644
index 000000000..2504b11c3
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h
@@ -0,0 +1,309 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 1999 - 2018 Intel Corporation. */
+
+#ifndef _E1000E_ICH8LAN_H_
+#define _E1000E_ICH8LAN_H_
+
+#define ICH_FLASH_GFPREG		0x0000
+#define ICH_FLASH_HSFSTS		0x0004
+#define ICH_FLASH_HSFCTL		0x0006
+#define ICH_FLASH_FADDR			0x0008
+#define ICH_FLASH_FDATA0		0x0010
+#define ICH_FLASH_PR0			0x0074
+
+/* Requires up to 10 seconds when MNG might be accessing part. */
+#define ICH_FLASH_READ_COMMAND_TIMEOUT	10000000
+#define ICH_FLASH_WRITE_COMMAND_TIMEOUT	10000000
+#define ICH_FLASH_ERASE_COMMAND_TIMEOUT	10000000
+#define ICH_FLASH_LINEAR_ADDR_MASK	0x00FFFFFF
+#define ICH_FLASH_CYCLE_REPEAT_COUNT	10
+
+#define ICH_CYCLE_READ			0
+#define ICH_CYCLE_WRITE			2
+#define ICH_CYCLE_ERASE			3
+
+#define FLASH_GFPREG_BASE_MASK		0x1FFF
+#define FLASH_SECTOR_ADDR_SHIFT		12
+
+#define ICH_FLASH_SEG_SIZE_256		256
+#define ICH_FLASH_SEG_SIZE_4K		4096
+#define ICH_FLASH_SEG_SIZE_8K		8192
+#define ICH_FLASH_SEG_SIZE_64K		65536
+
+#define E1000_ICH_FWSM_RSPCIPHY	0x00000040	/* Reset PHY on PCI Reset */
+/* FW established a valid mode */
+#define E1000_ICH_FWSM_FW_VALID	0x00008000
+#define E1000_ICH_FWSM_PCIM2PCI	0x01000000	/* ME PCIm-to-PCI active */
+#define E1000_ICH_FWSM_PCIM2PCI_COUNT	2000
+
+#define E1000_ICH_MNG_IAMT_MODE		0x2
+
+#define E1000_FWSM_WLOCK_MAC_MASK	0x0380
+#define E1000_FWSM_WLOCK_MAC_SHIFT	7
+#define E1000_FWSM_ULP_CFG_DONE		0x00000400	/* Low power cfg done */
+#define E1000_EXFWSM_DPG_EXIT_DONE	0x00000001
+
+/* Shared Receive Address Registers */
+#define E1000_SHRAL_PCH_LPT(_i)		(0x05408 + ((_i) * 8))
+#define E1000_SHRAH_PCH_LPT(_i)		(0x0540C + ((_i) * 8))
+
+#define E1000_H2ME		0x05B50	/* Host to ME */
+#define E1000_H2ME_START_DPG	0x00000001	/* indicate the ME of DPG */
+#define E1000_H2ME_EXIT_DPG	0x00000002	/* indicate the ME exit DPG */
+#define E1000_H2ME_ULP		0x00000800	/* ULP Indication Bit */
+#define E1000_H2ME_ENFORCE_SETTINGS	0x00001000	/* Enforce Settings */
+
+#define ID_LED_DEFAULT_ICH8LAN	((ID_LED_DEF1_DEF2 << 12) | \
+				 (ID_LED_OFF1_OFF2 <<  8) | \
+				 (ID_LED_OFF1_ON2  <<  4) | \
+				 (ID_LED_DEF1_DEF2))
+
+#define E1000_ICH_NVM_SIG_WORD		0x13u
+#define E1000_ICH_NVM_SIG_MASK		0xC000u
+#define E1000_ICH_NVM_VALID_SIG_MASK	0xC0u
+#define E1000_ICH_NVM_SIG_VALUE		0x80u
+
+#define E1000_ICH8_LAN_INIT_TIMEOUT	1500
+
+/* FEXT register bit definition */
+#define E1000_FEXT_PHY_CABLE_DISCONNECTED	0x00000004
+
+#define E1000_FEXTNVM_SW_CONFIG		1
+#define E1000_FEXTNVM_SW_CONFIG_ICH8M	(1 << 27)	/* different on ICH8M */
+
+#define E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK	0x0C000000
+#define E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC	0x08000000
+
+#define E1000_FEXTNVM4_BEACON_DURATION_MASK	0x7
+#define E1000_FEXTNVM4_BEACON_DURATION_8USEC	0x7
+#define E1000_FEXTNVM4_BEACON_DURATION_16USEC	0x3
+
+#define E1000_FEXTNVM6_REQ_PLL_CLK	0x00000100
+#define E1000_FEXTNVM6_ENABLE_K1_ENTRY_CONDITION	0x00000200
+#define E1000_FEXTNVM6_K1_OFF_ENABLE	0x80000000
+/* bit for disabling packet buffer read */
+#define E1000_FEXTNVM7_DISABLE_PB_READ	0x00040000
+#define E1000_FEXTNVM7_SIDE_CLK_UNGATE	0x00000004
+#define E1000_FEXTNVM7_DISABLE_SMB_PERST	0x00000020
+#define E1000_FEXTNVM9_IOSFSB_CLKGATE_DIS	0x00000800
+#define E1000_FEXTNVM9_IOSFSB_CLKREQ_DIS	0x00001000
+#define E1000_FEXTNVM11_DISABLE_PB_READ		0x00000200
+#define E1000_FEXTNVM11_DISABLE_MULR_FIX	0x00002000
+
+/* bit24: RXDCTL thresholds granularity: 0 - cache lines, 1 - descriptors */
+#define E1000_RXDCTL_THRESH_UNIT_DESC	0x01000000
+
+#define K1_ENTRY_LATENCY	0
+#define K1_MIN_TIME		1
+#define NVM_SIZE_MULTIPLIER 4096	/*multiplier for NVMS field */
+#define E1000_FLASH_BASE_ADDR 0xE000	/*offset of NVM access regs */
+#define E1000_CTRL_EXT_NVMVS 0x3	/*NVM valid sector */
+#define E1000_TARC0_CB_MULTIQ_3_REQ	0x30000000
+#define E1000_TARC0_CB_MULTIQ_2_REQ	0x20000000
+#define PCIE_ICH8_SNOOP_ALL	PCIE_NO_SNOOP_ALL
+
+#define E1000_ICH_RAR_ENTRIES	7
+#define E1000_PCH2_RAR_ENTRIES	5	/* RAR[0], SHRA[0-3] */
+#define E1000_PCH_LPT_RAR_ENTRIES	12	/* RAR[0], SHRA[0-10] */
+
+#define PHY_PAGE_SHIFT		5
+#define PHY_REG(page, reg)	(((page) << PHY_PAGE_SHIFT) | \
+				 ((reg) & MAX_PHY_REG_ADDRESS))
+#define IGP3_KMRN_DIAG	PHY_REG(770, 19)	/* KMRN Diagnostic */
+#define IGP3_VR_CTRL	PHY_REG(776, 18)	/* Voltage Regulator Control */
+
+#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS		0x0002
+#define IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK	0x0300
+#define IGP3_VR_CTRL_MODE_SHUTDOWN		0x0200
+
+/* PHY Wakeup Registers and defines */
+#define BM_PORT_GEN_CFG		PHY_REG(BM_PORT_CTRL_PAGE, 17)
+#define BM_RCTL			PHY_REG(BM_WUC_PAGE, 0)
+#define BM_WUC			PHY_REG(BM_WUC_PAGE, 1)
+#define BM_WUFC			PHY_REG(BM_WUC_PAGE, 2)
+#define BM_WUS			PHY_REG(BM_WUC_PAGE, 3)
+#define BM_RAR_L(_i)		(BM_PHY_REG(BM_WUC_PAGE, 16 + ((_i) << 2)))
+#define BM_RAR_M(_i)		(BM_PHY_REG(BM_WUC_PAGE, 17 + ((_i) << 2)))
+#define BM_RAR_H(_i)		(BM_PHY_REG(BM_WUC_PAGE, 18 + ((_i) << 2)))
+#define BM_RAR_CTRL(_i)		(BM_PHY_REG(BM_WUC_PAGE, 19 + ((_i) << 2)))
+#define BM_MTA(_i)		(BM_PHY_REG(BM_WUC_PAGE, 128 + ((_i) << 1)))
+
+#define BM_RCTL_UPE		0x0001	/* Unicast Promiscuous Mode */
+#define BM_RCTL_MPE		0x0002	/* Multicast Promiscuous Mode */
+#define BM_RCTL_MO_SHIFT	3	/* Multicast Offset Shift */
+#define BM_RCTL_MO_MASK		(3 << 3)	/* Multicast Offset Mask */
+#define BM_RCTL_BAM		0x0020	/* Broadcast Accept Mode */
+#define BM_RCTL_PMCF		0x0040	/* Pass MAC Control Frames */
+#define BM_RCTL_RFCE		0x0080	/* Rx Flow Control Enable */
+
+#define HV_LED_CONFIG		PHY_REG(768, 30)	/* LED Configuration */
+#define HV_MUX_DATA_CTRL	PHY_REG(776, 16)
+#define HV_MUX_DATA_CTRL_GEN_TO_MAC	0x0400
+#define HV_MUX_DATA_CTRL_FORCE_SPEED	0x0004
+#define HV_STATS_PAGE	778
+/* Half-duplex collision counts */
+#define HV_SCC_UPPER	PHY_REG(HV_STATS_PAGE, 16)	/* Single Collision */
+#define HV_SCC_LOWER	PHY_REG(HV_STATS_PAGE, 17)
+#define HV_ECOL_UPPER	PHY_REG(HV_STATS_PAGE, 18)	/* Excessive Coll. */
+#define HV_ECOL_LOWER	PHY_REG(HV_STATS_PAGE, 19)
+#define HV_MCC_UPPER	PHY_REG(HV_STATS_PAGE, 20)	/* Multiple Collision */
+#define HV_MCC_LOWER	PHY_REG(HV_STATS_PAGE, 21)
+#define HV_LATECOL_UPPER PHY_REG(HV_STATS_PAGE, 23)	/* Late Collision */
+#define HV_LATECOL_LOWER PHY_REG(HV_STATS_PAGE, 24)
+#define HV_COLC_UPPER	PHY_REG(HV_STATS_PAGE, 25)	/* Collision */
+#define HV_COLC_LOWER	PHY_REG(HV_STATS_PAGE, 26)
+#define HV_DC_UPPER	PHY_REG(HV_STATS_PAGE, 27)	/* Defer Count */
+#define HV_DC_LOWER	PHY_REG(HV_STATS_PAGE, 28)
+#define HV_TNCRS_UPPER	PHY_REG(HV_STATS_PAGE, 29)	/* Tx with no CRS */
+#define HV_TNCRS_LOWER	PHY_REG(HV_STATS_PAGE, 30)
+
+#define E1000_FCRTV_PCH	0x05F40	/* PCH Flow Control Refresh Timer Value */
+
+#define E1000_NVM_K1_CONFIG	0x1B	/* NVM K1 Config Word */
+#define E1000_NVM_K1_ENABLE	0x1	/* NVM Enable K1 bit */
+
+/* SMBus Control Phy Register */
+#define CV_SMB_CTRL		PHY_REG(769, 23)
+#define CV_SMB_CTRL_FORCE_SMBUS	0x0001
+
+/* I218 Ultra Low Power Configuration 1 Register */
+#define I218_ULP_CONFIG1		PHY_REG(779, 16)
+#define I218_ULP_CONFIG1_START		0x0001	/* Start auto ULP config */
+#define I218_ULP_CONFIG1_IND		0x0004	/* Pwr up from ULP indication */
+#define I218_ULP_CONFIG1_STICKY_ULP	0x0010	/* Set sticky ULP mode */
+#define I218_ULP_CONFIG1_INBAND_EXIT	0x0020	/* Inband on ULP exit */
+#define I218_ULP_CONFIG1_WOL_HOST	0x0040	/* WoL Host on ULP exit */
+#define I218_ULP_CONFIG1_RESET_TO_SMBUS	0x0100	/* Reset to SMBus mode */
+/* enable ULP even if when phy powered down via lanphypc */
+#define I218_ULP_CONFIG1_EN_ULP_LANPHYPC	0x0400
+/* disable clear of sticky ULP on PERST */
+#define I218_ULP_CONFIG1_DIS_CLR_STICKY_ON_PERST	0x0800
+#define I218_ULP_CONFIG1_DISABLE_SMB_PERST	0x1000	/* Disable on PERST# */
+
+/* SMBus Address Phy Register */
+#define HV_SMB_ADDR		PHY_REG(768, 26)
+#define HV_SMB_ADDR_MASK	0x007F
+#define HV_SMB_ADDR_PEC_EN	0x0200
+#define HV_SMB_ADDR_VALID	0x0080
+#define HV_SMB_ADDR_FREQ_MASK		0x1100
+#define HV_SMB_ADDR_FREQ_LOW_SHIFT	8
+#define HV_SMB_ADDR_FREQ_HIGH_SHIFT	12
+
+/* Strapping Option Register - RO */
+#define E1000_STRAP			0x0000C
+#define E1000_STRAP_SMBUS_ADDRESS_MASK	0x00FE0000
+#define E1000_STRAP_SMBUS_ADDRESS_SHIFT	17
+#define E1000_STRAP_SMT_FREQ_MASK	0x00003000
+#define E1000_STRAP_SMT_FREQ_SHIFT	12
+
+/* OEM Bits Phy Register */
+#define HV_OEM_BITS		PHY_REG(768, 25)
+#define HV_OEM_BITS_LPLU	0x0004	/* Low Power Link Up */
+#define HV_OEM_BITS_GBE_DIS	0x0040	/* Gigabit Disable */
+#define HV_OEM_BITS_RESTART_AN	0x0400	/* Restart Auto-negotiation */
+
+/* KMRN Mode Control */
+#define HV_KMRN_MODE_CTRL	PHY_REG(769, 16)
+#define HV_KMRN_MDIO_SLOW	0x0400
+
+/* KMRN FIFO Control and Status */
+#define HV_KMRN_FIFO_CTRLSTA			PHY_REG(770, 16)
+#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK	0x7000
+#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT	12
+
+/* PHY Power Management Control */
+#define HV_PM_CTRL		PHY_REG(770, 17)
+#define HV_PM_CTRL_K1_CLK_REQ		0x200
+#define HV_PM_CTRL_K1_ENABLE		0x4000
+
+#define I217_PLL_CLOCK_GATE_REG	PHY_REG(772, 28)
+#define I217_PLL_CLOCK_GATE_MASK	0x07FF
+
+#define SW_FLAG_TIMEOUT		1000	/* SW Semaphore flag timeout in ms */
+
+/* Inband Control */
+#define I217_INBAND_CTRL				PHY_REG(770, 18)
+#define I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_MASK	0x3F00
+#define I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_SHIFT	8
+
+/* Low Power Idle GPIO Control */
+#define I217_LPI_GPIO_CTRL			PHY_REG(772, 18)
+#define I217_LPI_GPIO_CTRL_AUTO_EN_LPI		0x0800
+
+/* PHY Low Power Idle Control */
+#define I82579_LPI_CTRL				PHY_REG(772, 20)
+#define I82579_LPI_CTRL_100_ENABLE		0x2000
+#define I82579_LPI_CTRL_1000_ENABLE		0x4000
+#define I82579_LPI_CTRL_ENABLE_MASK		0x6000
+#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT	0x80
+
+/* Extended Management Interface (EMI) Registers */
+#define I82579_EMI_ADDR		0x10
+#define I82579_EMI_DATA		0x11
+#define I82579_LPI_UPDATE_TIMER	0x4805	/* in 40ns units + 40 ns base value */
+#define I82579_MSE_THRESHOLD	0x084F	/* 82579 Mean Square Error Threshold */
+#define I82577_MSE_THRESHOLD	0x0887	/* 82577 Mean Square Error Threshold */
+#define I82579_MSE_LINK_DOWN	0x2411	/* MSE count before dropping link */
+#define I82579_RX_CONFIG		0x3412	/* Receive configuration */
+#define I82579_LPI_PLL_SHUT		0x4412	/* LPI PLL Shut Enable */
+#define I82579_EEE_PCS_STATUS		0x182E	/* IEEE MMD Register 3.1 >> 8 */
+#define I82579_EEE_CAPABILITY		0x0410	/* IEEE MMD Register 3.20 */
+#define I82579_EEE_ADVERTISEMENT	0x040E	/* IEEE MMD Register 7.60 */
+#define I82579_EEE_LP_ABILITY		0x040F	/* IEEE MMD Register 7.61 */
+#define I82579_EEE_100_SUPPORTED	(1 << 1)	/* 100BaseTx EEE */
+#define I82579_EEE_1000_SUPPORTED	(1 << 2)	/* 1000BaseTx EEE */
+#define I82579_LPI_100_PLL_SHUT	(1 << 2)	/* 100M LPI PLL Shut Enabled */
+#define I217_EEE_PCS_STATUS	0x9401	/* IEEE MMD Register 3.1 */
+#define I217_EEE_CAPABILITY	0x8000	/* IEEE MMD Register 3.20 */
+#define I217_EEE_ADVERTISEMENT	0x8001	/* IEEE MMD Register 7.60 */
+#define I217_EEE_LP_ABILITY	0x8002	/* IEEE MMD Register 7.61 */
+#define I217_RX_CONFIG		0xB20C	/* Receive configuration */
+
+#define E1000_EEE_RX_LPI_RCVD	0x0400	/* Tx LP idle received */
+#define E1000_EEE_TX_LPI_RCVD	0x0800	/* Rx LP idle received */
+
+/* Intel Rapid Start Technology Support */
+#define I217_PROXY_CTRL		BM_PHY_REG(BM_WUC_PAGE, 70)
+#define I217_PROXY_CTRL_AUTO_DISABLE	0x0080
+#define I217_SxCTRL			PHY_REG(BM_PORT_CTRL_PAGE, 28)
+#define I217_SxCTRL_ENABLE_LPI_RESET	0x1000
+#define I217_CGFREG			PHY_REG(772, 29)
+#define I217_CGFREG_ENABLE_MTA_RESET	0x0002
+#define I217_MEMPWR			PHY_REG(772, 26)
+#define I217_MEMPWR_DISABLE_SMB_RELEASE	0x0010
+
+/* Receive Address Initial CRC Calculation */
+#define E1000_PCH_RAICC(_n)	(0x05F50 + ((_n) * 4))
+
+/* Latency Tolerance Reporting */
+#define E1000_LTRV			0x000F8
+#define E1000_LTRV_VALUE_MASK		0x000003FF
+#define E1000_LTRV_SCALE_MAX		5
+#define E1000_LTRV_SCALE_FACTOR		5
+#define E1000_LTRV_SCALE_SHIFT		10
+#define E1000_LTRV_SCALE_MASK		0x00001C00
+#define E1000_LTRV_REQ_SHIFT		15
+#define E1000_LTRV_NOSNOOP_SHIFT	16
+#define E1000_LTRV_SEND			(1 << 30)
+
+/* Proprietary Latency Tolerance Reporting PCI Capability */
+#define E1000_PCI_LTR_CAP_LPT		0xA8
+
+/* Don't gate wake DMA clock */
+#define E1000_FFLT_DBG_DONT_GATE_WAKE_DMA_CLK	0x1000
+
+void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw);
+void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
+						  bool state);
+void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);
+void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw);
+void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw);
+void e1000_resume_workarounds_pchlan(struct e1000_hw *hw);
+s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);
+void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw);
+s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable);
+s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data);
+s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data);
+s32 e1000_set_eee_pchlan(struct e1000_hw *hw);
+s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx);
+#endif /* _E1000E_ICH8LAN_H_ */