Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 346 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/e1000e/ptp.c b/drivers/net/ethernet/intel/e1000e/ptp.c
new file mode 100644
index 000000000..def4566a9
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/ptp.c
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright(c) 1999 - 2018 Intel Corporation. */
+
+/* PTP 1588 Hardware Clock (PHC)
+ * Derived from PTP Hardware Clock driver for Intel 82576 and 82580 (igb)
+ * Copyright (C) 2011 Richard Cochran <richardcochran@gmail.com>
+ */
+
+#include "e1000.h"
+
+#ifdef CONFIG_E1000E_HWTS
+#include <linux/clocksource.h>
+#include <linux/ktime.h>
+#include <asm/tsc.h>
+#endif
+
+/**
+ * e1000e_phc_adjfine - adjust the frequency of the hardware clock
+ * @ptp: ptp clock structure
+ * @delta: Desired frequency chance in scaled parts per million
+ *
+ * Adjust the frequency of the PHC cycle counter by the indicated delta from
+ * the base frequency.
+ *
+ * Scaled parts per million is ppm but with a 16 bit binary fractional field.
+ **/
+static int e1000e_phc_adjfine(struct ptp_clock_info *ptp, long delta)
+{
+	struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter,
+						     ptp_clock_info);
+	struct e1000_hw *hw = &adapter->hw;
+	unsigned long flags;
+	u64 incvalue;
+	u32 timinca;
+	s32 ret_val;
+
+	/* Get the System Time Register SYSTIM base frequency */
+	ret_val = e1000e_get_base_timinca(adapter, &timinca);
+	if (ret_val)
+		return ret_val;
+
+	spin_lock_irqsave(&adapter->systim_lock, flags);
+
+	incvalue = timinca & E1000_TIMINCA_INCVALUE_MASK;
+	incvalue = adjust_by_scaled_ppm(incvalue, delta);
+
+	timinca &= ~E1000_TIMINCA_INCVALUE_MASK;
+	timinca |= incvalue;
+
+	ew32(TIMINCA, timinca);
+
+	adapter->ptp_delta = delta;
+
+	spin_unlock_irqrestore(&adapter->systim_lock, flags);
+
+	return 0;
+}
+
+/**
+ * e1000e_phc_adjtime - Shift the time of the hardware clock
+ * @ptp: ptp clock structure
+ * @delta: Desired change in nanoseconds
+ *
+ * Adjust the timer by resetting the timecounter structure.
+ **/
+static int e1000e_phc_adjtime(struct ptp_clock_info *ptp, s64 delta)
+{
+	struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter,
+						     ptp_clock_info);
+	unsigned long flags;
+
+	spin_lock_irqsave(&adapter->systim_lock, flags);
+	timecounter_adjtime(&adapter->tc, delta);
+	spin_unlock_irqrestore(&adapter->systim_lock, flags);
+
+	return 0;
+}
+
+#ifdef CONFIG_E1000E_HWTS
+#define MAX_HW_WAIT_COUNT (3)
+
+/**
+ * e1000e_phc_get_syncdevicetime - Callback given to timekeeping code reads system/device registers
+ * @device: current device time
+ * @system: system counter value read synchronously with device time
+ * @ctx: context provided by timekeeping code
+ *
+ * Read device and system (ART) clock simultaneously and return the corrected
+ * clock values in ns.
+ **/
+static int e1000e_phc_get_syncdevicetime(ktime_t *device,
+					 struct system_counterval_t *system,
+					 void *ctx)
+{
+	struct e1000_adapter *adapter = (struct e1000_adapter *)ctx;
+	struct e1000_hw *hw = &adapter->hw;
+	unsigned long flags;
+	int i;
+	u32 tsync_ctrl;
+	u64 dev_cycles;
+	u64 sys_cycles;
+
+	tsync_ctrl = er32(TSYNCTXCTL);
+	tsync_ctrl |= E1000_TSYNCTXCTL_START_SYNC |
+		E1000_TSYNCTXCTL_MAX_ALLOWED_DLY_MASK;
+	ew32(TSYNCTXCTL, tsync_ctrl);
+	for (i = 0; i < MAX_HW_WAIT_COUNT; ++i) {
+		udelay(1);
+		tsync_ctrl = er32(TSYNCTXCTL);
+		if (tsync_ctrl & E1000_TSYNCTXCTL_SYNC_COMP)
+			break;
+	}
+
+	if (i == MAX_HW_WAIT_COUNT)
+		return -ETIMEDOUT;
+
+	dev_cycles = er32(SYSSTMPH);
+	dev_cycles <<= 32;
+	dev_cycles |= er32(SYSSTMPL);
+	spin_lock_irqsave(&adapter->systim_lock, flags);
+	*device = ns_to_ktime(timecounter_cyc2time(&adapter->tc, dev_cycles));
+	spin_unlock_irqrestore(&adapter->systim_lock, flags);
+
+	sys_cycles = er32(PLTSTMPH);
+	sys_cycles <<= 32;
+	sys_cycles |= er32(PLTSTMPL);
+	*system = convert_art_to_tsc(sys_cycles);
+
+	return 0;
+}
+
+/**
+ * e1000e_phc_getcrosststamp - Reads the current system/device cross timestamp
+ * @ptp: ptp clock structure
+ * @xtstamp: structure containing timestamp
+ *
+ * Read device and system (ART) clock simultaneously and return the scaled
+ * clock values in ns.
+ **/
+static int e1000e_phc_getcrosststamp(struct ptp_clock_info *ptp,
+				     struct system_device_crosststamp *xtstamp)
+{
+	struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter,
+						     ptp_clock_info);
+
+	return get_device_system_crosststamp(e1000e_phc_get_syncdevicetime,
+						adapter, NULL, xtstamp);
+}
+#endif/*CONFIG_E1000E_HWTS*/
+
+/**
+ * e1000e_phc_gettimex - Reads the current time from the hardware clock and
+ *                       system clock
+ * @ptp: ptp clock structure
+ * @ts: timespec structure to hold the current PHC time
+ * @sts: structure to hold the current system time
+ *
+ * Read the timecounter and return the correct value in ns after converting
+ * it into a struct timespec.
+ **/
+static int e1000e_phc_gettimex(struct ptp_clock_info *ptp,
+			       struct timespec64 *ts,
+			       struct ptp_system_timestamp *sts)
+{
+	struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter,
+						     ptp_clock_info);
+	unsigned long flags;
+	u64 cycles, ns;
+
+	spin_lock_irqsave(&adapter->systim_lock, flags);
+
+	/* NOTE: Non-monotonic SYSTIM readings may be returned */
+	cycles = e1000e_read_systim(adapter, sts);
+	ns = timecounter_cyc2time(&adapter->tc, cycles);
+
+	spin_unlock_irqrestore(&adapter->systim_lock, flags);
+
+	*ts = ns_to_timespec64(ns);
+
+	return 0;
+}
+
+/**
+ * e1000e_phc_settime - Set the current time on the hardware clock
+ * @ptp: ptp clock structure
+ * @ts: timespec containing the new time for the cycle counter
+ *
+ * Reset the timecounter to use a new base value instead of the kernel
+ * wall timer value.
+ **/
+static int e1000e_phc_settime(struct ptp_clock_info *ptp,
+			      const struct timespec64 *ts)
+{
+	struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter,
+						     ptp_clock_info);
+	unsigned long flags;
+	u64 ns;
+
+	ns = timespec64_to_ns(ts);
+
+	/* reset the timecounter */
+	spin_lock_irqsave(&adapter->systim_lock, flags);
+	timecounter_init(&adapter->tc, &adapter->cc, ns);
+	spin_unlock_irqrestore(&adapter->systim_lock, flags);
+
+	return 0;
+}
+
+/**
+ * e1000e_phc_enable - enable or disable an ancillary feature
+ * @ptp: ptp clock structure
+ * @request: Desired resource to enable or disable
+ * @on: Caller passes one to enable or zero to disable
+ *
+ * Enable (or disable) ancillary features of the PHC subsystem.
+ * Currently, no ancillary features are supported.
+ **/
+static int e1000e_phc_enable(struct ptp_clock_info __always_unused *ptp,
+			     struct ptp_clock_request __always_unused *request,
+			     int __always_unused on)
+{
+	return -EOPNOTSUPP;
+}
+
+static void e1000e_systim_overflow_work(struct work_struct *work)
+{
+	struct e1000_adapter *adapter = container_of(work, struct e1000_adapter,
+						     systim_overflow_work.work);
+	struct e1000_hw *hw = &adapter->hw;
+	struct timespec64 ts;
+	u64 ns;
+
+	/* Update the timecounter */
+	ns = timecounter_read(&adapter->tc);
+
+	ts = ns_to_timespec64(ns);
+	e_dbg("SYSTIM overflow check at %lld.%09lu\n",
+	      (long long) ts.tv_sec, ts.tv_nsec);
+
+	schedule_delayed_work(&adapter->systim_overflow_work,
+			      E1000_SYSTIM_OVERFLOW_PERIOD);
+}
+
+static const struct ptp_clock_info e1000e_ptp_clock_info = {
+	.owner		= THIS_MODULE,
+	.n_alarm	= 0,
+	.n_ext_ts	= 0,
+	.n_per_out	= 0,
+	.n_pins		= 0,
+	.pps		= 0,
+	.adjfine	= e1000e_phc_adjfine,
+	.adjtime	= e1000e_phc_adjtime,
+	.gettimex64	= e1000e_phc_gettimex,
+	.settime64	= e1000e_phc_settime,
+	.enable		= e1000e_phc_enable,
+};
+
+/**
+ * e1000e_ptp_init - initialize PTP for devices which support it
+ * @adapter: board private structure
+ *
+ * This function performs the required steps for enabling PTP support.
+ * If PTP support has already been loaded it simply calls the cyclecounter
+ * init routine and exits.
+ **/
+void e1000e_ptp_init(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+
+	adapter->ptp_clock = NULL;
+
+	if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP))
+		return;
+
+	adapter->ptp_clock_info = e1000e_ptp_clock_info;
+
+	snprintf(adapter->ptp_clock_info.name,
+		 sizeof(adapter->ptp_clock_info.name), "%pm",
+		 adapter->netdev->perm_addr);
+
+	switch (hw->mac.type) {
+	case e1000_pch2lan:
+	case e1000_pch_lpt:
+	case e1000_pch_spt:
+	case e1000_pch_cnp:
+	case e1000_pch_tgp:
+	case e1000_pch_adp:
+	case e1000_pch_mtp:
+	case e1000_pch_lnp:
+	case e1000_pch_ptp:
+		if ((hw->mac.type < e1000_pch_lpt) ||
+		    (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)) {
+			adapter->ptp_clock_info.max_adj = 24000000 - 1;
+			break;
+		}
+		fallthrough;
+	case e1000_82574:
+	case e1000_82583:
+		adapter->ptp_clock_info.max_adj = 600000000 - 1;
+		break;
+	default:
+		break;
+	}
+
+#ifdef CONFIG_E1000E_HWTS
+	/* CPU must have ART and GBe must be from Sunrise Point or greater */
+	if (hw->mac.type >= e1000_pch_spt && boot_cpu_has(X86_FEATURE_ART))
+		adapter->ptp_clock_info.getcrosststamp =
+			e1000e_phc_getcrosststamp;
+#endif/*CONFIG_E1000E_HWTS*/
+
+	INIT_DELAYED_WORK(&adapter->systim_overflow_work,
+			  e1000e_systim_overflow_work);
+
+	schedule_delayed_work(&adapter->systim_overflow_work,
+			      E1000_SYSTIM_OVERFLOW_PERIOD);
+
+	adapter->ptp_clock = ptp_clock_register(&adapter->ptp_clock_info,
+						&adapter->pdev->dev);
+	if (IS_ERR(adapter->ptp_clock)) {
+		adapter->ptp_clock = NULL;
+		e_err("ptp_clock_register failed\n");
+	} else if (adapter->ptp_clock) {
+		e_info("registered PHC clock\n");
+	}
+}
+
+/**
+ * e1000e_ptp_remove - disable PTP device and stop the overflow check
+ * @adapter: board private structure
+ *
+ * Stop the PTP support, and cancel the delayed work.
+ **/
+void e1000e_ptp_remove(struct e1000_adapter *adapter)
+{
+	if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP))
+		return;
+
+	cancel_delayed_work_sync(&adapter->systim_overflow_work);
+
+	if (adapter->ptp_clock) {
+		ptp_clock_unregister(adapter->ptp_clock);
+		adapter->ptp_clock = NULL;
+		e_info("removed PHC\n");
+	}
+}