Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 557 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.h b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
new file mode 100644
index 000000000..768290dc6
--- /dev/null
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
@@ -0,0 +1,557 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 2013 - 2018 Intel Corporation. */
+
+#ifndef _I40E_TXRX_H_
+#define _I40E_TXRX_H_
+
+#include <net/xdp.h>
+
+/* Interrupt Throttling and Rate Limiting Goodies */
+#define I40E_DEFAULT_IRQ_WORK      256
+
+/* The datasheet for the X710 and XL710 indicate that the maximum value for
+ * the ITR is 8160usec which is then called out as 0xFF0 with a 2usec
+ * resolution. 8160 is 0x1FE0 when written out in hex. So instead of storing
+ * the register value which is divided by 2 lets use the actual values and
+ * avoid an excessive amount of translation.
+ */
+#define I40E_ITR_DYNAMIC	0x8000	/* use top bit as a flag */
+#define I40E_ITR_MASK		0x1FFE	/* mask for ITR register value */
+#define I40E_MIN_ITR		     2	/* reg uses 2 usec resolution */
+#define I40E_ITR_20K		    50
+#define I40E_ITR_8K		   122
+#define I40E_MAX_ITR		  8160	/* maximum value as per datasheet */
+#define ITR_TO_REG(setting) ((setting) & ~I40E_ITR_DYNAMIC)
+#define ITR_REG_ALIGN(setting) __ALIGN_MASK(setting, ~I40E_ITR_MASK)
+#define ITR_IS_DYNAMIC(setting) (!!((setting) & I40E_ITR_DYNAMIC))
+
+#define I40E_ITR_RX_DEF		(I40E_ITR_20K | I40E_ITR_DYNAMIC)
+#define I40E_ITR_TX_DEF		(I40E_ITR_20K | I40E_ITR_DYNAMIC)
+
+/* 0x40 is the enable bit for interrupt rate limiting, and must be set if
+ * the value of the rate limit is non-zero
+ */
+#define INTRL_ENA                  BIT(6)
+#define I40E_MAX_INTRL             0x3B    /* reg uses 4 usec resolution */
+#define INTRL_REG_TO_USEC(intrl) ((intrl & ~INTRL_ENA) << 2)
+
+/**
+ * i40e_intrl_usec_to_reg - convert interrupt rate limit to register
+ * @intrl: interrupt rate limit to convert
+ *
+ * This function converts a decimal interrupt rate limit to the appropriate
+ * register format expected by the firmware when setting interrupt rate limit.
+ */
+static inline u16 i40e_intrl_usec_to_reg(int intrl)
+{
+	if (intrl >> 2)
+		return ((intrl >> 2) | INTRL_ENA);
+	else
+		return 0;
+}
+
+#define I40E_QUEUE_END_OF_LIST 0x7FF
+
+/* this enum matches hardware bits and is meant to be used by DYN_CTLN
+ * registers and QINT registers or more generally anywhere in the manual
+ * mentioning ITR_INDX, ITR_NONE cannot be used as an index 'n' into any
+ * register but instead is a special value meaning "don't update" ITR0/1/2.
+ */
+enum i40e_dyn_idx_t {
+	I40E_IDX_ITR0 = 0,
+	I40E_IDX_ITR1 = 1,
+	I40E_IDX_ITR2 = 2,
+	I40E_ITR_NONE = 3	/* ITR_NONE must not be used as an index */
+};
+
+/* these are indexes into ITRN registers */
+#define I40E_RX_ITR    I40E_IDX_ITR0
+#define I40E_TX_ITR    I40E_IDX_ITR1
+
+/* Supported RSS offloads */
+#define I40E_DEFAULT_RSS_HENA ( \
+	BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV4_UDP) | \
+	BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV4_SCTP) | \
+	BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV4_TCP) | \
+	BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV4_OTHER) | \
+	BIT_ULL(I40E_FILTER_PCTYPE_FRAG_IPV4) | \
+	BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV6_UDP) | \
+	BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV6_TCP) | \
+	BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV6_SCTP) | \
+	BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV6_OTHER) | \
+	BIT_ULL(I40E_FILTER_PCTYPE_FRAG_IPV6) | \
+	BIT_ULL(I40E_FILTER_PCTYPE_L2_PAYLOAD))
+
+#define I40E_DEFAULT_RSS_HENA_EXPANDED (I40E_DEFAULT_RSS_HENA | \
+	BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV4_TCP_SYN_NO_ACK) | \
+	BIT_ULL(I40E_FILTER_PCTYPE_NONF_UNICAST_IPV4_UDP) | \
+	BIT_ULL(I40E_FILTER_PCTYPE_NONF_MULTICAST_IPV4_UDP) | \
+	BIT_ULL(I40E_FILTER_PCTYPE_NONF_IPV6_TCP_SYN_NO_ACK) | \
+	BIT_ULL(I40E_FILTER_PCTYPE_NONF_UNICAST_IPV6_UDP) | \
+	BIT_ULL(I40E_FILTER_PCTYPE_NONF_MULTICAST_IPV6_UDP))
+
+#define i40e_pf_get_default_rss_hena(pf) \
+	(((pf)->hw_features & I40E_HW_MULTIPLE_TCP_UDP_RSS_PCTYPE) ? \
+	  I40E_DEFAULT_RSS_HENA_EXPANDED : I40E_DEFAULT_RSS_HENA)
+
+/* Supported Rx Buffer Sizes (a multiple of 128) */
+#define I40E_RXBUFFER_256   256
+#define I40E_RXBUFFER_1536  1536  /* 128B aligned standard Ethernet frame */
+#define I40E_RXBUFFER_2048  2048
+#define I40E_RXBUFFER_3072  3072  /* Used for large frames w/ padding */
+#define I40E_MAX_RXBUFFER   9728  /* largest size for single descriptor */
+
+/* NOTE: netdev_alloc_skb reserves up to 64 bytes, NET_IP_ALIGN means we
+ * reserve 2 more, and skb_shared_info adds an additional 384 bytes more,
+ * this adds up to 512 bytes of extra data meaning the smallest allocation
+ * we could have is 1K.
+ * i.e. RXBUFFER_256 --> 960 byte skb (size-1024 slab)
+ * i.e. RXBUFFER_512 --> 1216 byte skb (size-2048 slab)
+ */
+#define I40E_RX_HDR_SIZE I40E_RXBUFFER_256
+#define I40E_PACKET_HDR_PAD (ETH_HLEN + ETH_FCS_LEN + (VLAN_HLEN * 2))
+#define i40e_rx_desc i40e_16byte_rx_desc
+
+#define I40E_RX_DMA_ATTR \
+	(DMA_ATTR_SKIP_CPU_SYNC | DMA_ATTR_WEAK_ORDERING)
+
+/* Attempt to maximize the headroom available for incoming frames.  We
+ * use a 2K buffer for receives and need 1536/1534 to store the data for
+ * the frame.  This leaves us with 512 bytes of room.  From that we need
+ * to deduct the space needed for the shared info and the padding needed
+ * to IP align the frame.
+ *
+ * Note: For cache line sizes 256 or larger this value is going to end
+ *	 up negative.  In these cases we should fall back to the legacy
+ *	 receive path.
+ */
+#if (PAGE_SIZE < 8192)
+#define I40E_2K_TOO_SMALL_WITH_PADDING \
+((NET_SKB_PAD + I40E_RXBUFFER_1536) > SKB_WITH_OVERHEAD(I40E_RXBUFFER_2048))
+
+static inline int i40e_compute_pad(int rx_buf_len)
+{
+	int page_size, pad_size;
+
+	page_size = ALIGN(rx_buf_len, PAGE_SIZE / 2);
+	pad_size = SKB_WITH_OVERHEAD(page_size) - rx_buf_len;
+
+	return pad_size;
+}
+
+static inline int i40e_skb_pad(void)
+{
+	int rx_buf_len;
+
+	/* If a 2K buffer cannot handle a standard Ethernet frame then
+	 * optimize padding for a 3K buffer instead of a 1.5K buffer.
+	 *
+	 * For a 3K buffer we need to add enough padding to allow for
+	 * tailroom due to NET_IP_ALIGN possibly shifting us out of
+	 * cache-line alignment.
+	 */
+	if (I40E_2K_TOO_SMALL_WITH_PADDING)
+		rx_buf_len = I40E_RXBUFFER_3072 + SKB_DATA_ALIGN(NET_IP_ALIGN);
+	else
+		rx_buf_len = I40E_RXBUFFER_1536;
+
+	/* if needed make room for NET_IP_ALIGN */
+	rx_buf_len -= NET_IP_ALIGN;
+
+	return i40e_compute_pad(rx_buf_len);
+}
+
+#define I40E_SKB_PAD i40e_skb_pad()
+#else
+#define I40E_2K_TOO_SMALL_WITH_PADDING false
+#define I40E_SKB_PAD (NET_SKB_PAD + NET_IP_ALIGN)
+#endif
+
+/**
+ * i40e_test_staterr - tests bits in Rx descriptor status and error fields
+ * @rx_desc: pointer to receive descriptor (in le64 format)
+ * @stat_err_bits: value to mask
+ *
+ * This function does some fast chicanery in order to return the
+ * value of the mask which is really only used for boolean tests.
+ * The status_error_len doesn't need to be shifted because it begins
+ * at offset zero.
+ */
+static inline bool i40e_test_staterr(union i40e_rx_desc *rx_desc,
+				     const u64 stat_err_bits)
+{
+	return !!(rx_desc->wb.qword1.status_error_len &
+		  cpu_to_le64(stat_err_bits));
+}
+
+/* How many Rx Buffers do we bundle into one write to the hardware ? */
+#define I40E_RX_BUFFER_WRITE	32	/* Must be power of 2 */
+
+#define I40E_RX_NEXT_DESC(r, i, n)		\
+	do {					\
+		(i)++;				\
+		if ((i) == (r)->count)		\
+			i = 0;			\
+		(n) = I40E_RX_DESC((r), (i));	\
+	} while (0)
+
+
+#define I40E_MAX_BUFFER_TXD	8
+#define I40E_MIN_TX_LEN		17
+
+/* The size limit for a transmit buffer in a descriptor is (16K - 1).
+ * In order to align with the read requests we will align the value to
+ * the nearest 4K which represents our maximum read request size.
+ */
+#define I40E_MAX_READ_REQ_SIZE		4096
+#define I40E_MAX_DATA_PER_TXD		(16 * 1024 - 1)
+#define I40E_MAX_DATA_PER_TXD_ALIGNED \
+	(I40E_MAX_DATA_PER_TXD & ~(I40E_MAX_READ_REQ_SIZE - 1))
+
+/**
+ * i40e_txd_use_count  - estimate the number of descriptors needed for Tx
+ * @size: transmit request size in bytes
+ *
+ * Due to hardware alignment restrictions (4K alignment), we need to
+ * assume that we can have no more than 12K of data per descriptor, even
+ * though each descriptor can take up to 16K - 1 bytes of aligned memory.
+ * Thus, we need to divide by 12K. But division is slow! Instead,
+ * we decompose the operation into shifts and one relatively cheap
+ * multiply operation.
+ *
+ * To divide by 12K, we first divide by 4K, then divide by 3:
+ *     To divide by 4K, shift right by 12 bits
+ *     To divide by 3, multiply by 85, then divide by 256
+ *     (Divide by 256 is done by shifting right by 8 bits)
+ * Finally, we add one to round up. Because 256 isn't an exact multiple of
+ * 3, we'll underestimate near each multiple of 12K. This is actually more
+ * accurate as we have 4K - 1 of wiggle room that we can fit into the last
+ * segment.  For our purposes this is accurate out to 1M which is orders of
+ * magnitude greater than our largest possible GSO size.
+ *
+ * This would then be implemented as:
+ *     return (((size >> 12) * 85) >> 8) + 1;
+ *
+ * Since multiplication and division are commutative, we can reorder
+ * operations into:
+ *     return ((size * 85) >> 20) + 1;
+ */
+static inline unsigned int i40e_txd_use_count(unsigned int size)
+{
+	return ((size * 85) >> 20) + 1;
+}
+
+/* Tx Descriptors needed, worst case */
+#define DESC_NEEDED (MAX_SKB_FRAGS + 6)
+
+#define I40E_TX_FLAGS_HW_VLAN		BIT(1)
+#define I40E_TX_FLAGS_SW_VLAN		BIT(2)
+#define I40E_TX_FLAGS_TSO		BIT(3)
+#define I40E_TX_FLAGS_IPV4		BIT(4)
+#define I40E_TX_FLAGS_IPV6		BIT(5)
+#define I40E_TX_FLAGS_TSYN		BIT(8)
+#define I40E_TX_FLAGS_FD_SB		BIT(9)
+#define I40E_TX_FLAGS_UDP_TUNNEL	BIT(10)
+#define I40E_TX_FLAGS_VLAN_MASK		0xffff0000
+#define I40E_TX_FLAGS_VLAN_PRIO_MASK	0xe0000000
+#define I40E_TX_FLAGS_VLAN_PRIO_SHIFT	29
+#define I40E_TX_FLAGS_VLAN_SHIFT	16
+
+struct i40e_tx_buffer {
+	struct i40e_tx_desc *next_to_watch;
+	union {
+		struct xdp_frame *xdpf;
+		struct sk_buff *skb;
+		void *raw_buf;
+	};
+	unsigned int bytecount;
+	unsigned short gso_segs;
+
+	DEFINE_DMA_UNMAP_ADDR(dma);
+	DEFINE_DMA_UNMAP_LEN(len);
+	u32 tx_flags;
+};
+
+struct i40e_rx_buffer {
+	dma_addr_t dma;
+	struct page *page;
+	__u32 page_offset;
+	__u16 pagecnt_bias;
+};
+
+struct i40e_queue_stats {
+	u64 packets;
+	u64 bytes;
+};
+
+struct i40e_tx_queue_stats {
+	u64 restart_queue;
+	u64 tx_busy;
+	u64 tx_done_old;
+	u64 tx_linearize;
+	u64 tx_force_wb;
+	u64 tx_stopped;
+	int prev_pkt_ctr;
+};
+
+struct i40e_rx_queue_stats {
+	u64 non_eop_descs;
+	u64 alloc_page_failed;
+	u64 alloc_buff_failed;
+	u64 page_reuse_count;
+	u64 page_alloc_count;
+	u64 page_waive_count;
+	u64 page_busy_count;
+};
+
+enum i40e_ring_state_t {
+	__I40E_TX_FDIR_INIT_DONE,
+	__I40E_TX_XPS_INIT_DONE,
+	__I40E_RING_STATE_NBITS /* must be last */
+};
+
+/* some useful defines for virtchannel interface, which
+ * is the only remaining user of header split
+ */
+#define I40E_RX_DTYPE_HEADER_SPLIT  1
+#define I40E_RX_SPLIT_L2      0x1
+#define I40E_RX_SPLIT_IP      0x2
+#define I40E_RX_SPLIT_TCP_UDP 0x4
+#define I40E_RX_SPLIT_SCTP    0x8
+
+/* struct that defines a descriptor ring, associated with a VSI */
+struct i40e_ring {
+	struct i40e_ring *next;		/* pointer to next ring in q_vector */
+	void *desc;			/* Descriptor ring memory */
+	struct device *dev;		/* Used for DMA mapping */
+	struct net_device *netdev;	/* netdev ring maps to */
+	struct bpf_prog *xdp_prog;
+	union {
+		struct i40e_tx_buffer *tx_bi;
+		struct i40e_rx_buffer *rx_bi;
+		struct xdp_buff **rx_bi_zc;
+	};
+	DECLARE_BITMAP(state, __I40E_RING_STATE_NBITS);
+	u16 queue_index;		/* Queue number of ring */
+	u8 dcb_tc;			/* Traffic class of ring */
+	u8 __iomem *tail;
+
+	/* high bit set means dynamic, use accessor routines to read/write.
+	 * hardware only supports 2us resolution for the ITR registers.
+	 * these values always store the USER setting, and must be converted
+	 * before programming to a register.
+	 */
+	u16 itr_setting;
+
+	u16 count;			/* Number of descriptors */
+	u16 reg_idx;			/* HW register index of the ring */
+	u16 rx_buf_len;
+
+	/* used in interrupt processing */
+	u16 next_to_use;
+	u16 next_to_clean;
+	u16 xdp_tx_active;
+
+	u8 atr_sample_rate;
+	u8 atr_count;
+
+	bool ring_active;		/* is ring online or not */
+	bool arm_wb;		/* do something to arm write back */
+	u8 packet_stride;
+
+	u16 flags;
+#define I40E_TXR_FLAGS_WB_ON_ITR		BIT(0)
+#define I40E_RXR_FLAGS_BUILD_SKB_ENABLED	BIT(1)
+#define I40E_TXR_FLAGS_XDP			BIT(2)
+
+	/* stats structs */
+	struct i40e_queue_stats	stats;
+	struct u64_stats_sync syncp;
+	union {
+		struct i40e_tx_queue_stats tx_stats;
+		struct i40e_rx_queue_stats rx_stats;
+	};
+
+	unsigned int size;		/* length of descriptor ring in bytes */
+	dma_addr_t dma;			/* physical address of ring */
+
+	struct i40e_vsi *vsi;		/* Backreference to associated VSI */
+	struct i40e_q_vector *q_vector;	/* Backreference to associated vector */
+
+	struct rcu_head rcu;		/* to avoid race on free */
+	u16 next_to_alloc;
+	struct sk_buff *skb;		/* When i40e_clean_rx_ring_irq() must
+					 * return before it sees the EOP for
+					 * the current packet, we save that skb
+					 * here and resume receiving this
+					 * packet the next time
+					 * i40e_clean_rx_ring_irq() is called
+					 * for this ring.
+					 */
+
+	struct i40e_channel *ch;
+	u16 rx_offset;
+	struct xdp_rxq_info xdp_rxq;
+	struct xsk_buff_pool *xsk_pool;
+} ____cacheline_internodealigned_in_smp;
+
+static inline bool ring_uses_build_skb(struct i40e_ring *ring)
+{
+	return !!(ring->flags & I40E_RXR_FLAGS_BUILD_SKB_ENABLED);
+}
+
+static inline void set_ring_build_skb_enabled(struct i40e_ring *ring)
+{
+	ring->flags |= I40E_RXR_FLAGS_BUILD_SKB_ENABLED;
+}
+
+static inline void clear_ring_build_skb_enabled(struct i40e_ring *ring)
+{
+	ring->flags &= ~I40E_RXR_FLAGS_BUILD_SKB_ENABLED;
+}
+
+static inline bool ring_is_xdp(struct i40e_ring *ring)
+{
+	return !!(ring->flags & I40E_TXR_FLAGS_XDP);
+}
+
+static inline void set_ring_xdp(struct i40e_ring *ring)
+{
+	ring->flags |= I40E_TXR_FLAGS_XDP;
+}
+
+#define I40E_ITR_ADAPTIVE_MIN_INC	0x0002
+#define I40E_ITR_ADAPTIVE_MIN_USECS	0x0002
+#define I40E_ITR_ADAPTIVE_MAX_USECS	0x007e
+#define I40E_ITR_ADAPTIVE_LATENCY	0x8000
+#define I40E_ITR_ADAPTIVE_BULK		0x0000
+
+struct i40e_ring_container {
+	struct i40e_ring *ring;		/* pointer to linked list of ring(s) */
+	unsigned long next_update;	/* jiffies value of next update */
+	unsigned int total_bytes;	/* total bytes processed this int */
+	unsigned int total_packets;	/* total packets processed this int */
+	u16 count;
+	u16 target_itr;			/* target ITR setting for ring(s) */
+	u16 current_itr;		/* current ITR setting for ring(s) */
+};
+
+/* iterator for handling rings in ring container */
+#define i40e_for_each_ring(pos, head) \
+	for (pos = (head).ring; pos != NULL; pos = pos->next)
+
+static inline unsigned int i40e_rx_pg_order(struct i40e_ring *ring)
+{
+#if (PAGE_SIZE < 8192)
+	if (ring->rx_buf_len > (PAGE_SIZE / 2))
+		return 1;
+#endif
+	return 0;
+}
+
+#define i40e_rx_pg_size(_ring) (PAGE_SIZE << i40e_rx_pg_order(_ring))
+
+bool i40e_alloc_rx_buffers(struct i40e_ring *rxr, u16 cleaned_count);
+netdev_tx_t i40e_lan_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
+u16 i40e_lan_select_queue(struct net_device *netdev, struct sk_buff *skb,
+			  struct net_device *sb_dev);
+void i40e_clean_tx_ring(struct i40e_ring *tx_ring);
+void i40e_clean_rx_ring(struct i40e_ring *rx_ring);
+int i40e_setup_tx_descriptors(struct i40e_ring *tx_ring);
+int i40e_setup_rx_descriptors(struct i40e_ring *rx_ring);
+void i40e_free_tx_resources(struct i40e_ring *tx_ring);
+void i40e_free_rx_resources(struct i40e_ring *rx_ring);
+int i40e_napi_poll(struct napi_struct *napi, int budget);
+void i40e_force_wb(struct i40e_vsi *vsi, struct i40e_q_vector *q_vector);
+u32 i40e_get_tx_pending(struct i40e_ring *ring, bool in_sw);
+void i40e_detect_recover_hung(struct i40e_vsi *vsi);
+int __i40e_maybe_stop_tx(struct i40e_ring *tx_ring, int size);
+bool __i40e_chk_linearize(struct sk_buff *skb);
+int i40e_xdp_xmit(struct net_device *dev, int n, struct xdp_frame **frames,
+		  u32 flags);
+
+/**
+ * i40e_get_head - Retrieve head from head writeback
+ * @tx_ring:  tx ring to fetch head of
+ *
+ * Returns value of Tx ring head based on value stored
+ * in head write-back location
+ **/
+static inline u32 i40e_get_head(struct i40e_ring *tx_ring)
+{
+	void *head = (struct i40e_tx_desc *)tx_ring->desc + tx_ring->count;
+
+	return le32_to_cpu(*(volatile __le32 *)head);
+}
+
+/**
+ * i40e_xmit_descriptor_count - calculate number of Tx descriptors needed
+ * @skb:     send buffer
+ *
+ * Returns number of data descriptors needed for this skb. Returns 0 to indicate
+ * there is not enough descriptors available in this ring since we need at least
+ * one descriptor.
+ **/
+static inline int i40e_xmit_descriptor_count(struct sk_buff *skb)
+{
+	const skb_frag_t *frag = &skb_shinfo(skb)->frags[0];
+	unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
+	int count = 0, size = skb_headlen(skb);
+
+	for (;;) {
+		count += i40e_txd_use_count(size);
+
+		if (!nr_frags--)
+			break;
+
+		size = skb_frag_size(frag++);
+	}
+
+	return count;
+}
+
+/**
+ * i40e_maybe_stop_tx - 1st level check for Tx stop conditions
+ * @tx_ring: the ring to be checked
+ * @size:    the size buffer we want to assure is available
+ *
+ * Returns 0 if stop is not needed
+ **/
+static inline int i40e_maybe_stop_tx(struct i40e_ring *tx_ring, int size)
+{
+	if (likely(I40E_DESC_UNUSED(tx_ring) >= size))
+		return 0;
+	return __i40e_maybe_stop_tx(tx_ring, size);
+}
+
+/**
+ * i40e_chk_linearize - Check if there are more than 8 fragments per packet
+ * @skb:      send buffer
+ * @count:    number of buffers used
+ *
+ * Note: Our HW can't scatter-gather more than 8 fragments to build
+ * a packet on the wire and so we need to figure out the cases where we
+ * need to linearize the skb.
+ **/
+static inline bool i40e_chk_linearize(struct sk_buff *skb, int count)
+{
+	/* Both TSO and single send will work if count is less than 8 */
+	if (likely(count < I40E_MAX_BUFFER_TXD))
+		return false;
+
+	if (skb_is_gso(skb))
+		return __i40e_chk_linearize(skb);
+
+	/* we can support up to 8 data buffers for a single send */
+	return count != I40E_MAX_BUFFER_TXD;
+}
+
+/**
+ * txring_txq - Find the netdev Tx ring based on the i40e Tx ring
+ * @ring: Tx ring to find the netdev equivalent of
+ **/
+static inline struct netdev_queue *txring_txq(const struct i40e_ring *ring)
+{
+	return netdev_get_tx_queue(ring->netdev, ring->queue_index);
+}
+#endif /* _I40E_TXRX_H_ */